diff mbox

[1/2] ARM: ux500: Provide a link from AB8500 Pinctrl to the PRCMU

Message ID 1357919129-1928-1-git-send-email-lee.jones@linaro.org
State Accepted
Commit 8979cfef26a74f0df154d4e991bdafb4105af8f1
Headers show

Commit Message

Lee Jones Jan. 11, 2013, 3:45 p.m. UTC 
The AB8500 Pinctrl driver uses PRCMU register addresses to
control Pinctrl related functions. For this to happen, the
Pinctrl driver needs the PRCMU base to work from. We can do
that using standard Open Firmware (of_*) function calls, but
first we need a mechanism to gain access to the PRCMU
device node. We're going to use a Phandle in this case.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/boot/dts/dbx5x0.dtsi |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
index db69f3c..3381ba6 100644
--- a/arch/arm/boot/dts/dbx5x0.dtsi
+++ b/arch/arm/boot/dts/dbx5x0.dtsi
@@ -170,10 +170,9 @@ 
 			gpio-bank = <8>;
 		};
 
-		pinctrl@80157000 {
-			// This is actually the PRCMU base address
-			reg = <0x80157000 0x2000>;
+		pinctrl {
 			compatible = "stericsson,nmk_pinctrl";
+			prcm = <&prcmu>;
 		};
 
 		usb@a03e0000 {
@@ -190,7 +189,7 @@ 
 			interrupts = <0 25 0x4>;
 		};
 
-		prcmu@80157000 {
+		prcmu: prcmu@80157000 {
 			compatible = "stericsson,db8500-prcmu";
 			reg = <0x80157000 0x2000>;
 			interrupts = <0 47 0x4>;