@@ -53,25 +53,25 @@ Qualcomm Camera Subsystem
Usage: required
Value type: <stringlist>
Definition: Should contain the following entries:
- - "top_ahb"
- - "ispif_ahb"
- - "csiphy0_timer"
- - "csiphy1_timer"
- - "csi0_ahb"
- - "csi0"
- - "csi0_phy"
- - "csi0_pix"
- - "csi0_rdi"
- - "csi1_ahb"
- - "csi1"
- - "csi1_phy"
- - "csi1_pix"
- - "csi1_rdi"
- - "ahb"
- - "vfe0"
- - "csi_vfe0"
- - "vfe_ahb"
- - "vfe_axi"
+ - "top_ahb"
+ - "ispif_ahb"
+ - "csiphy0_timer"
+ - "csiphy1_timer"
+ - "csi0_ahb"
+ - "csi0"
+ - "csi0_phy"
+ - "csi0_pix"
+ - "csi0_rdi"
+ - "csi1_ahb"
+ - "csi1"
+ - "csi1_phy"
+ - "csi1_pix"
+ - "csi1_rdi"
+ - "ahb"
+ - "vfe0"
+ - "csi_vfe0"
+ - "vfe_ahb"
+ - "vfe_axi"
- vdda-supply:
Usage: required
Value type: <phandle>
@@ -95,17 +95,17 @@ Qualcomm Camera Subsystem
- clock-lanes:
Usage: required
Value type: <u32>
- Definition: The physical clock lane index. The value
- must always be <1> as the physical clock
- lane is lane 1.
+ Definition: The physical clock lane index. The value
+ must always be <1> as the physical clock
+ lane is lane 1.
- data-lanes:
Usage: required
Value type: <prop-encoded-array>
- Definition: An array of physical data lanes indexes.
- Position of an entry determines the logical
- lane number, while the value of an entry
- indicates physical lane index. Lane swapping
- is supported.
+ Definition: An array of physical data lanes indexes.
+ Position of an entry determines the logical
+ lane number, while the value of an entry
+ indicates physical lane index. Lane swapping
+ is supported.
* An Example
@@ -161,25 +161,25 @@ Qualcomm Camera Subsystem
<&gcc GCC_CAMSS_CSI_VFE0_CLK>,
<&gcc GCC_CAMSS_VFE_AHB_CLK>,
<&gcc GCC_CAMSS_VFE_AXI_CLK>;
- clock-names = "top_ahb",
- "ispif_ahb",
- "csiphy0_timer",
- "csiphy1_timer",
- "csi0_ahb",
- "csi0",
- "csi0_phy",
- "csi0_pix",
- "csi0_rdi",
- "csi1_ahb",
- "csi1",
- "csi1_phy",
- "csi1_pix",
- "csi1_rdi",
- "ahb",
- "vfe0",
- "csi_vfe0",
- "vfe_ahb",
- "vfe_axi";
+ clock-names = "top_ahb",
+ "ispif_ahb",
+ "csiphy0_timer",
+ "csiphy1_timer",
+ "csi0_ahb",
+ "csi0",
+ "csi0_phy",
+ "csi0_pix",
+ "csi0_rdi",
+ "csi1_ahb",
+ "csi1",
+ "csi1_phy",
+ "csi1_pix",
+ "csi1_rdi",
+ "ahb",
+ "vfe0",
+ "csi_vfe0",
+ "vfe_ahb",
+ "vfe_axi";
vdda-supply = <&pm8916_l2>;
iommus = <&apps_iommu 3>;
ports {
Use tabs. CC: Rob Herring <robh+dt@kernel.org> CC: Mark Rutland <mark.rutland@arm.com> CC: devicetree@vger.kernel.org Signed-off-by: Todor Tomov <todor.tomov@linaro.org> --- .../devicetree/bindings/media/qcom,camss.txt | 92 +++++++++++----------- 1 file changed, 46 insertions(+), 46 deletions(-) -- 2.7.4