diff mbox series

[3/4] net/ncsi: Use netdev_dbg for debug messages

Message ID 20180618071916.6765-4-joel@jms.id.au
State Superseded
Headers show
Series Slience NCSI logging | expand

Commit Message

Joel Stanley June 18, 2018, 7:19 a.m. UTC 
This moves all of the netdev_printk(KERN_DEBUG, ...) messages over to
netdev_dbg. There is no change in behaviour.

Signed-off-by: Joel Stanley <joel@jms.id.au>

---
 net/ncsi/ncsi-aen.c    |  6 +++---
 net/ncsi/ncsi-manage.c | 33 +++++++++++++++------------------
 2 files changed, 18 insertions(+), 21 deletions(-)

-- 
2.17.1

Comments

Joe Perches June 18, 2018, 8:53 p.m. UTC | #1 
On Mon, 2018-06-18 at 16:49 +0930, Joel Stanley wrote:
> This moves all of the netdev_printk(KERN_DEBUG, ...) messages over to

> netdev_dbg. There is no change in behaviour.


Not quite, but I think the patch is fine anyway.

netdev_printk(KERN_DEBUG ... is always emitted as
long as the console level includes debug output.

netdev_dbg is not included in object code unless
DEBUG is defined or CONFIG_DYNAMIC_DEBUG is set.
And then, it is not emitted into the log unless
DEBUG is set or this specific netdev_dbg is enabled
via the dynamic debug control file.

> Signed-off-by: Joel Stanley <joel@jms.id.au>

> ---

>  net/ncsi/ncsi-aen.c    |  6 +++---

>  net/ncsi/ncsi-manage.c | 33 +++++++++++++++------------------

>  2 files changed, 18 insertions(+), 21 deletions(-)

> 

> diff --git a/net/ncsi/ncsi-aen.c b/net/ncsi/ncsi-aen.c

> index f899ed61bb57..25e483e8278b 100644

> --- a/net/ncsi/ncsi-aen.c

> +++ b/net/ncsi/ncsi-aen.c

> @@ -148,9 +148,9 @@ static int ncsi_aen_handler_hncdsc(struct ncsi_dev_priv *ndp,

>  	hncdsc = (struct ncsi_aen_hncdsc_pkt *)h;

>  	ncm->data[3] = ntohl(hncdsc->status);

>  	spin_unlock_irqrestore(&nc->lock, flags);

> -	netdev_printk(KERN_DEBUG, ndp->ndev.dev,

> -		      "NCSI: host driver %srunning on channel %u\n",

> -		      ncm->data[3] & 0x1 ? "" : "not ", nc->id);

> +	netdev_dbg(ndp->ndev.dev,

> +		   "NCSI: host driver %srunning on channel %u\n",

> +		   ncm->data[3] & 0x1 ? "" : "not ", nc->id);

>  

>  	return 0;

>  }

> diff --git a/net/ncsi/ncsi-manage.c b/net/ncsi/ncsi-manage.c

> index 716493a61ba6..091284760d21 100644

> --- a/net/ncsi/ncsi-manage.c

> +++ b/net/ncsi/ncsi-manage.c

> @@ -788,8 +788,8 @@ static void ncsi_configure_channel(struct ncsi_dev_priv *ndp)

>  		}

>  		break;

>  	case ncsi_dev_state_config_done:

> -		netdev_printk(KERN_DEBUG, ndp->ndev.dev,

> -			      "NCSI: channel %u config done\n", nc->id);

> +		netdev_dbg(ndp->ndev.dev, "NCSI: channel %u config done\n",

> +			   nc->id);

>  		spin_lock_irqsave(&nc->lock, flags);

>  		if (nc->reconfigure_needed) {

>  			/* This channel's configuration has been updated

> @@ -804,8 +804,7 @@ static void ncsi_configure_channel(struct ncsi_dev_priv *ndp)

>  			list_add_tail_rcu(&nc->link, &ndp->channel_queue);

>  			spin_unlock_irqrestore(&ndp->lock, flags);

>  

> -			netdev_printk(KERN_DEBUG, dev,

> -				      "Dirty NCSI channel state reset\n");

> +			netdev_dbg(dev, "Dirty NCSI channel state reset\n");

>  			ncsi_process_next_channel(ndp);

>  			break;

>  		}

> @@ -908,9 +907,9 @@ static int ncsi_choose_active_channel(struct ncsi_dev_priv *ndp)

>  	}

>  

>  	ncm = &found->modes[NCSI_MODE_LINK];

> -	netdev_printk(KERN_DEBUG, ndp->ndev.dev,

> -		      "NCSI: Channel %u added to queue (link %s)\n",

> -		      found->id, ncm->data[2] & 0x1 ? "up" : "down");

> +	netdev_dbg(ndp->ndev.dev,

> +		   "NCSI: Channel %u added to queue (link %s)\n",

> +		   found->id, ncm->data[2] & 0x1 ? "up" : "down");

>  

>  out:

>  	spin_lock_irqsave(&ndp->lock, flags);

> @@ -1316,9 +1315,9 @@ static int ncsi_kick_channels(struct ncsi_dev_priv *ndp)

>  				if ((ndp->ndev.state & 0xff00) ==

>  						ncsi_dev_state_config ||

>  						!list_empty(&nc->link)) {

> -					netdev_printk(KERN_DEBUG, nd->dev,

> -						      "NCSI: channel %p marked dirty\n",

> -						      nc);

> +					netdev_dbg(nd->dev,

> +						   "NCSI: channel %p marked dirty\n",

> +						   nc);

>  					nc->reconfigure_needed = true;

>  				}

>  				spin_unlock_irqrestore(&nc->lock, flags);

> @@ -1336,8 +1335,7 @@ static int ncsi_kick_channels(struct ncsi_dev_priv *ndp)

>  			list_add_tail_rcu(&nc->link, &ndp->channel_queue);

>  			spin_unlock_irqrestore(&ndp->lock, flags);

>  

> -			netdev_printk(KERN_DEBUG, nd->dev,

> -				      "NCSI: kicked channel %p\n", nc);

> +			netdev_dbg(nd->dev, "NCSI: kicked channel %p\n", nc);

>  			n++;

>  		}

>  	}

> @@ -1368,8 +1366,8 @@ int ncsi_vlan_rx_add_vid(struct net_device *dev, __be16 proto, u16 vid)

>  	list_for_each_entry_rcu(vlan, &ndp->vlan_vids, list) {

>  		n_vids++;

>  		if (vlan->vid == vid) {

> -			netdev_printk(KERN_DEBUG, dev,

> -				      "NCSI: vid %u already registered\n", vid);

> +			netdev_dbg(dev, "NCSI: vid %u already registered\n",

> +				   vid);

>  			return 0;

>  		}

>  	}

> @@ -1388,7 +1386,7 @@ int ncsi_vlan_rx_add_vid(struct net_device *dev, __be16 proto, u16 vid)

>  	vlan->vid = vid;

>  	list_add_rcu(&vlan->list, &ndp->vlan_vids);

>  

> -	netdev_printk(KERN_DEBUG, dev, "NCSI: Added new vid %u\n", vid);

> +	netdev_dbg(dev, "NCSI: Added new vid %u\n", vid);

>  

>  	found = ncsi_kick_channels(ndp) != 0;

>  

> @@ -1417,8 +1415,7 @@ int ncsi_vlan_rx_kill_vid(struct net_device *dev, __be16 proto, u16 vid)

>  	/* Remove the VLAN id from our internal list */

>  	list_for_each_entry_safe(vlan, tmp, &ndp->vlan_vids, list)

>  		if (vlan->vid == vid) {

> -			netdev_printk(KERN_DEBUG, dev,

> -				      "NCSI: vid %u found, removing\n", vid);

> +			netdev_dbg(dev, "NCSI: vid %u found, removing\n", vid);

>  			list_del_rcu(&vlan->list);

>  			found = true;

>  			kfree(vlan);

> @@ -1545,7 +1542,7 @@ void ncsi_stop_dev(struct ncsi_dev *nd)

>  		}

>  	}

>  

> -	netdev_printk(KERN_DEBUG, ndp->ndev.dev, "NCSI: Stopping device\n");

> +	netdev_dbg(ndp->ndev.dev, "NCSI: Stopping device\n");

>  	ncsi_report_link(ndp, true);

>  }

>  EXPORT_SYMBOL_GPL(ncsi_stop_dev);
Samuel Mendoza-Jonas June 19, 2018, 12:47 a.m. UTC | #2 
On Mon, 2018-06-18 at 13:53 -0700, Joe Perches wrote:
> On Mon, 2018-06-18 at 16:49 +0930, Joel Stanley wrote:

> > This moves all of the netdev_printk(KERN_DEBUG, ...) messages over to

> > netdev_dbg. There is no change in behaviour.

> 

> Not quite, but I think the patch is fine anyway.

> 

> netdev_printk(KERN_DEBUG ... is always emitted as

> long as the console level includes debug output.

> 

> netdev_dbg is not included in object code unless

> DEBUG is defined or CONFIG_DYNAMIC_DEBUG is set.

> And then, it is not emitted into the log unless

> DEBUG is set or this specific netdev_dbg is enabled

> via the dynamic debug control file.


Right this is fine for these sort of messages; very noisy and not particularly
critical.

For this and the other logging updates:
Acked-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>


> 

> > Signed-off-by: Joel Stanley <joel@jms.id.au>

> > ---

> >  net/ncsi/ncsi-aen.c    |  6 +++---

> >  net/ncsi/ncsi-manage.c | 33 +++++++++++++++------------------

> >  2 files changed, 18 insertions(+), 21 deletions(-)

> > 

> > diff --git a/net/ncsi/ncsi-aen.c b/net/ncsi/ncsi-aen.c

> > index f899ed61bb57..25e483e8278b 100644

> > --- a/net/ncsi/ncsi-aen.c

> > +++ b/net/ncsi/ncsi-aen.c

> > @@ -148,9 +148,9 @@ static int ncsi_aen_handler_hncdsc(struct ncsi_dev_priv *ndp,

> >  	hncdsc = (struct ncsi_aen_hncdsc_pkt *)h;

> >  	ncm->data[3] = ntohl(hncdsc->status);

> >  	spin_unlock_irqrestore(&nc->lock, flags);

> > -	netdev_printk(KERN_DEBUG, ndp->ndev.dev,

> > -		      "NCSI: host driver %srunning on channel %u\n",

> > -		      ncm->data[3] & 0x1 ? "" : "not ", nc->id);

> > +	netdev_dbg(ndp->ndev.dev,

> > +		   "NCSI: host driver %srunning on channel %u\n",

> > +		   ncm->data[3] & 0x1 ? "" : "not ", nc->id);

> >  

> >  	return 0;

> >  }

> > diff --git a/net/ncsi/ncsi-manage.c b/net/ncsi/ncsi-manage.c

> > index 716493a61ba6..091284760d21 100644

> > --- a/net/ncsi/ncsi-manage.c

> > +++ b/net/ncsi/ncsi-manage.c

> > @@ -788,8 +788,8 @@ static void ncsi_configure_channel(struct ncsi_dev_priv *ndp)

> >  		}

> >  		break;

> >  	case ncsi_dev_state_config_done:

> > -		netdev_printk(KERN_DEBUG, ndp->ndev.dev,

> > -			      "NCSI: channel %u config done\n", nc->id);

> > +		netdev_dbg(ndp->ndev.dev, "NCSI: channel %u config done\n",

> > +			   nc->id);

> >  		spin_lock_irqsave(&nc->lock, flags);

> >  		if (nc->reconfigure_needed) {

> >  			/* This channel's configuration has been updated

> > @@ -804,8 +804,7 @@ static void ncsi_configure_channel(struct ncsi_dev_priv *ndp)

> >  			list_add_tail_rcu(&nc->link, &ndp->channel_queue);

> >  			spin_unlock_irqrestore(&ndp->lock, flags);

> >  

> > -			netdev_printk(KERN_DEBUG, dev,

> > -				      "Dirty NCSI channel state reset\n");

> > +			netdev_dbg(dev, "Dirty NCSI channel state reset\n");

> >  			ncsi_process_next_channel(ndp);

> >  			break;

> >  		}

> > @@ -908,9 +907,9 @@ static int ncsi_choose_active_channel(struct ncsi_dev_priv *ndp)

> >  	}

> >  

> >  	ncm = &found->modes[NCSI_MODE_LINK];

> > -	netdev_printk(KERN_DEBUG, ndp->ndev.dev,

> > -		      "NCSI: Channel %u added to queue (link %s)\n",

> > -		      found->id, ncm->data[2] & 0x1 ? "up" : "down");

> > +	netdev_dbg(ndp->ndev.dev,

> > +		   "NCSI: Channel %u added to queue (link %s)\n",

> > +		   found->id, ncm->data[2] & 0x1 ? "up" : "down");

> >  

> >  out:

> >  	spin_lock_irqsave(&ndp->lock, flags);

> > @@ -1316,9 +1315,9 @@ static int ncsi_kick_channels(struct ncsi_dev_priv *ndp)

> >  				if ((ndp->ndev.state & 0xff00) ==

> >  						ncsi_dev_state_config ||

> >  						!list_empty(&nc->link)) {

> > -					netdev_printk(KERN_DEBUG, nd->dev,

> > -						      "NCSI: channel %p marked dirty\n",

> > -						      nc);

> > +					netdev_dbg(nd->dev,

> > +						   "NCSI: channel %p marked dirty\n",

> > +						   nc);

> >  					nc->reconfigure_needed = true;

> >  				}

> >  				spin_unlock_irqrestore(&nc->lock, flags);

> > @@ -1336,8 +1335,7 @@ static int ncsi_kick_channels(struct ncsi_dev_priv *ndp)

> >  			list_add_tail_rcu(&nc->link, &ndp->channel_queue);

> >  			spin_unlock_irqrestore(&ndp->lock, flags);

> >  

> > -			netdev_printk(KERN_DEBUG, nd->dev,

> > -				      "NCSI: kicked channel %p\n", nc);

> > +			netdev_dbg(nd->dev, "NCSI: kicked channel %p\n", nc);

> >  			n++;

> >  		}

> >  	}

> > @@ -1368,8 +1366,8 @@ int ncsi_vlan_rx_add_vid(struct net_device *dev, __be16 proto, u16 vid)

> >  	list_for_each_entry_rcu(vlan, &ndp->vlan_vids, list) {

> >  		n_vids++;

> >  		if (vlan->vid == vid) {

> > -			netdev_printk(KERN_DEBUG, dev,

> > -				      "NCSI: vid %u already registered\n", vid);

> > +			netdev_dbg(dev, "NCSI: vid %u already registered\n",

> > +				   vid);

> >  			return 0;

> >  		}

> >  	}

> > @@ -1388,7 +1386,7 @@ int ncsi_vlan_rx_add_vid(struct net_device *dev, __be16 proto, u16 vid)

> >  	vlan->vid = vid;

> >  	list_add_rcu(&vlan->list, &ndp->vlan_vids);

> >  

> > -	netdev_printk(KERN_DEBUG, dev, "NCSI: Added new vid %u\n", vid);

> > +	netdev_dbg(dev, "NCSI: Added new vid %u\n", vid);

> >  

> >  	found = ncsi_kick_channels(ndp) != 0;

> >  

> > @@ -1417,8 +1415,7 @@ int ncsi_vlan_rx_kill_vid(struct net_device *dev, __be16 proto, u16 vid)

> >  	/* Remove the VLAN id from our internal list */

> >  	list_for_each_entry_safe(vlan, tmp, &ndp->vlan_vids, list)

> >  		if (vlan->vid == vid) {

> > -			netdev_printk(KERN_DEBUG, dev,

> > -				      "NCSI: vid %u found, removing\n", vid);

> > +			netdev_dbg(dev, "NCSI: vid %u found, removing\n", vid);

> >  			list_del_rcu(&vlan->list);

> >  			found = true;

> >  			kfree(vlan);

> > @@ -1545,7 +1542,7 @@ void ncsi_stop_dev(struct ncsi_dev *nd)

> >  		}

> >  	}

> >  

> > -	netdev_printk(KERN_DEBUG, ndp->ndev.dev, "NCSI: Stopping device\n");

> > +	netdev_dbg(ndp->ndev.dev, "NCSI: Stopping device\n");

> >  	ncsi_report_link(ndp, true);

> >  }

> >  EXPORT_SYMBOL_GPL(ncsi_stop_dev);
diff mbox series

Patch

diff --git a/net/ncsi/ncsi-aen.c b/net/ncsi/ncsi-aen.c
index f899ed61bb57..25e483e8278b 100644
--- a/net/ncsi/ncsi-aen.c
+++ b/net/ncsi/ncsi-aen.c
@@ -148,9 +148,9 @@  static int ncsi_aen_handler_hncdsc(struct ncsi_dev_priv *ndp,
 	hncdsc = (struct ncsi_aen_hncdsc_pkt *)h;
 	ncm->data[3] = ntohl(hncdsc->status);
 	spin_unlock_irqrestore(&nc->lock, flags);
-	netdev_printk(KERN_DEBUG, ndp->ndev.dev,
-		      "NCSI: host driver %srunning on channel %u\n",
-		      ncm->data[3] & 0x1 ? "" : "not ", nc->id);
+	netdev_dbg(ndp->ndev.dev,
+		   "NCSI: host driver %srunning on channel %u\n",
+		   ncm->data[3] & 0x1 ? "" : "not ", nc->id);
 
 	return 0;
 }
diff --git a/net/ncsi/ncsi-manage.c b/net/ncsi/ncsi-manage.c
index 716493a61ba6..091284760d21 100644
--- a/net/ncsi/ncsi-manage.c
+++ b/net/ncsi/ncsi-manage.c
@@ -788,8 +788,8 @@  static void ncsi_configure_channel(struct ncsi_dev_priv *ndp)
 		}
 		break;
 	case ncsi_dev_state_config_done:
-		netdev_printk(KERN_DEBUG, ndp->ndev.dev,
-			      "NCSI: channel %u config done\n", nc->id);
+		netdev_dbg(ndp->ndev.dev, "NCSI: channel %u config done\n",
+			   nc->id);
 		spin_lock_irqsave(&nc->lock, flags);
 		if (nc->reconfigure_needed) {
 			/* This channel's configuration has been updated
@@ -804,8 +804,7 @@  static void ncsi_configure_channel(struct ncsi_dev_priv *ndp)
 			list_add_tail_rcu(&nc->link, &ndp->channel_queue);
 			spin_unlock_irqrestore(&ndp->lock, flags);
 
-			netdev_printk(KERN_DEBUG, dev,
-				      "Dirty NCSI channel state reset\n");
+			netdev_dbg(dev, "Dirty NCSI channel state reset\n");
 			ncsi_process_next_channel(ndp);
 			break;
 		}
@@ -908,9 +907,9 @@  static int ncsi_choose_active_channel(struct ncsi_dev_priv *ndp)
 	}
 
 	ncm = &found->modes[NCSI_MODE_LINK];
-	netdev_printk(KERN_DEBUG, ndp->ndev.dev,
-		      "NCSI: Channel %u added to queue (link %s)\n",
-		      found->id, ncm->data[2] & 0x1 ? "up" : "down");
+	netdev_dbg(ndp->ndev.dev,
+		   "NCSI: Channel %u added to queue (link %s)\n",
+		   found->id, ncm->data[2] & 0x1 ? "up" : "down");
 
 out:
 	spin_lock_irqsave(&ndp->lock, flags);
@@ -1316,9 +1315,9 @@  static int ncsi_kick_channels(struct ncsi_dev_priv *ndp)
 				if ((ndp->ndev.state & 0xff00) ==
 						ncsi_dev_state_config ||
 						!list_empty(&nc->link)) {
-					netdev_printk(KERN_DEBUG, nd->dev,
-						      "NCSI: channel %p marked dirty\n",
-						      nc);
+					netdev_dbg(nd->dev,
+						   "NCSI: channel %p marked dirty\n",
+						   nc);
 					nc->reconfigure_needed = true;
 				}
 				spin_unlock_irqrestore(&nc->lock, flags);
@@ -1336,8 +1335,7 @@  static int ncsi_kick_channels(struct ncsi_dev_priv *ndp)
 			list_add_tail_rcu(&nc->link, &ndp->channel_queue);
 			spin_unlock_irqrestore(&ndp->lock, flags);
 
-			netdev_printk(KERN_DEBUG, nd->dev,
-				      "NCSI: kicked channel %p\n", nc);
+			netdev_dbg(nd->dev, "NCSI: kicked channel %p\n", nc);
 			n++;
 		}
 	}
@@ -1368,8 +1366,8 @@  int ncsi_vlan_rx_add_vid(struct net_device *dev, __be16 proto, u16 vid)
 	list_for_each_entry_rcu(vlan, &ndp->vlan_vids, list) {
 		n_vids++;
 		if (vlan->vid == vid) {
-			netdev_printk(KERN_DEBUG, dev,
-				      "NCSI: vid %u already registered\n", vid);
+			netdev_dbg(dev, "NCSI: vid %u already registered\n",
+				   vid);
 			return 0;
 		}
 	}
@@ -1388,7 +1386,7 @@  int ncsi_vlan_rx_add_vid(struct net_device *dev, __be16 proto, u16 vid)
 	vlan->vid = vid;
 	list_add_rcu(&vlan->list, &ndp->vlan_vids);
 
-	netdev_printk(KERN_DEBUG, dev, "NCSI: Added new vid %u\n", vid);
+	netdev_dbg(dev, "NCSI: Added new vid %u\n", vid);
 
 	found = ncsi_kick_channels(ndp) != 0;
 
@@ -1417,8 +1415,7 @@  int ncsi_vlan_rx_kill_vid(struct net_device *dev, __be16 proto, u16 vid)
 	/* Remove the VLAN id from our internal list */
 	list_for_each_entry_safe(vlan, tmp, &ndp->vlan_vids, list)
 		if (vlan->vid == vid) {
-			netdev_printk(KERN_DEBUG, dev,
-				      "NCSI: vid %u found, removing\n", vid);
+			netdev_dbg(dev, "NCSI: vid %u found, removing\n", vid);
 			list_del_rcu(&vlan->list);
 			found = true;
 			kfree(vlan);
@@ -1545,7 +1542,7 @@  void ncsi_stop_dev(struct ncsi_dev *nd)
 		}
 	}
 
-	netdev_printk(KERN_DEBUG, ndp->ndev.dev, "NCSI: Stopping device\n");
+	netdev_dbg(ndp->ndev.dev, "NCSI: Stopping device\n");
 	ncsi_report_link(ndp, true);
 }
 EXPORT_SYMBOL_GPL(ncsi_stop_dev);