@@ -20,6 +20,7 @@
#include <common.h>
#include <malloc.h>
#include <spi.h>
+#include <fdtdec.h>
#include <asm/arch/clk.h>
#include <asm/arch/clock.h>
#include <asm/arch/cpu.h>
@@ -28,16 +29,20 @@
#include <asm/arch-exynos/spi.h>
#include <asm/io.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/* Information about each SPI controller */
struct spi_bus {
enum periph_id periph_id;
s32 frequency; /* Default clock frequency, -1 for none */
struct exynos_spi *regs;
int inited; /* 1 if this bus is ready for use */
+ int node;
};
/* A list of spi buses that we know about */
static struct spi_bus spi_bus[EXYNOS5_SPI_NUM_CONTROLLERS];
+static unsigned int bus_count;
struct exynos_spi_slave {
struct spi_slave slave;
@@ -50,7 +55,7 @@ struct exynos_spi_slave {
static struct spi_bus *spi_get_bus(unsigned dev_index)
{
- if (dev_index < EXYNOS5_SPI_NUM_CONTROLLERS)
+ if (dev_index < bus_count)
return &spi_bus[dev_index];
debug("%s: invalid bus %d", __func__, dev_index);
@@ -347,21 +352,100 @@ static inline struct exynos_spi *get_spi_base(int dev_index)
(dev_index - 3);
}
+/*
+ * Read the SPI config from the device tree node.
+ *
+ * @param blob FDT blob to read from
+ * @param node Node offset to read from
+ * @param bus SPI bus structure to fill with information
+ * @return 0 if ok, or -FDT_ERR_NOTFOUND if something was missing
+ */
+static int spi_get_config(const void *blob, int node, struct spi_bus *bus)
+{
+ bus->node = node;
+ bus->regs = (struct exynos_spi *)fdtdec_get_addr(blob, node, "reg");
+ bus->periph_id = pinmux_decode_periph_id(blob, node);
+
+ if (bus->periph_id == PERIPH_ID_NONE) {
+ debug("%s: Invalid peripheral ID %d\n", __func__,
+ bus->periph_id);
+ return -FDT_ERR_NOTFOUND;
+ }
+
+ /* Use 500KHz as a suitable default */
+ bus->frequency = fdtdec_get_int(blob, node, "spi-max-frequency",
+ 500000);
+
+ return 0;
+}
+
+/*
+ * Process a list of nodes, adding them to our list of SPI ports.
+ *
+ * @param blob fdt blob
+ * @param node_list list of nodes to process (any <=0 are ignored)
+ * @param count number of nodes to process
+ * @param is_dvc 1 if these are DVC ports, 0 if standard I2C
+ * @return 0 if ok, -1 on error
+ */
+static int process_nodes(const void *blob, int node_list[], int count)
+{
+ int i;
+
+ /* build the i2c_controllers[] for each controller */
+ for (i = 0; i < count; i++) {
+ int node = node_list[i];
+ struct spi_bus *bus;
+
+ if (node <= 0)
+ continue;
+
+ bus = &spi_bus[i];
+ if (spi_get_config(blob, node, bus)) {
+ printf("exynos spi_init: failed to decode bus %d\n",
+ i);
+ return -1;
+ }
+
+ debug("spi: controller bus %d at %p, periph_id %d\n",
+ i, bus->regs, bus->periph_id);
+ bus->inited = 1;
+ bus_count++;
+ }
+
+ return 0;
+}
+
/* Sadly there is no error return from this function */
void spi_init(void)
{
- int i;
+ int count;
+
+#ifdef CONFIG_OF_CONTROL
+ int node_list[EXYNOS5_SPI_NUM_CONTROLLERS];
+ const void *blob = gd->fdt_blob;
+
+ count = fdtdec_find_aliases_for_id(blob, "spi",
+ COMPAT_SAMSUNG_EXYNOS_SPI, node_list,
+ EXYNOS5_SPI_NUM_CONTROLLERS);
+ if (process_nodes(blob, node_list, count))
+ return;
+
+#else
struct spi_bus *bus;
- for (i = 0; i < EXYNOS5_SPI_NUM_CONTROLLERS; i++) {
- bus = &spi_bus[i];
- bus->regs = get_spi_base(i);
- bus->periph_id = PERIPH_ID_SPI0 + i;
+ for (count = 0; count < EXYNOS5_SPI_NUM_CONTROLLERS; count++) {
+ bus = &spi_bus[count];
+ bus->regs = get_spi_base(count);
+ bus->periph_id = PERIPH_ID_SPI0 + count;
/* Although Exynos5 supports upto 50Mhz speed,
* we are setting it to 10Mhz for safe side
*/
bus->frequency = 10000000;
bus->inited = 1;
+ bus->node = 0;
+ bus_count = EXYNOS5_SPI_NUM_CONTROLLERS;
}
+#endif
}