@@ -738,6 +738,39 @@ static unsigned int sdhci_target_timeout(struct sdhci_host *host,
return target_timeout;
}
+static void sdhci_calc_sw_timeout(struct sdhci_host *host,
+ struct mmc_command *cmd)
+{
+ struct mmc_data *data = cmd->data;
+ struct mmc_host *mmc = host->mmc;
+ struct mmc_ios *ios = &mmc->ios;
+ unsigned char bus_width = 1 << ios->bus_width;
+ unsigned int blksz;
+ unsigned int freq;
+ u64 target_timeout;
+ u64 transfer_time;
+
+ target_timeout = sdhci_target_timeout(host, cmd, data);
+ target_timeout *= NSEC_PER_USEC;
+
+ if (data) {
+ blksz = data->blksz;
+ freq = host->mmc->actual_clock ? : host->clock;
+ transfer_time = (u64)blksz * NSEC_PER_SEC * (8 / bus_width);
+ do_div(transfer_time, freq);
+ /* multiply by '2' to account for any unknowns */
+ transfer_time = transfer_time * 2;
+ /* calculate timeout for the entire data */
+ host->data_timeout = data->blocks * target_timeout +
+ transfer_time;
+ } else {
+ host->data_timeout = target_timeout;
+ }
+
+ if (host->data_timeout)
+ host->data_timeout += MMC_CMD_TRANSFER_TIME;
+}
+
static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd,
bool *too_big)
{
@@ -831,6 +864,7 @@ static void sdhci_set_timeout(struct sdhci_host *host, struct mmc_command *cmd)
if (too_big &&
host->quirks2 & SDHCI_QUIRK2_DISABLE_HW_TIMEOUT) {
+ sdhci_calc_sw_timeout(host, cmd);
sdhci_set_data_timeout_irq(host, false);
} else if (!(host->ier & SDHCI_INT_DATA_TIMEOUT)) {
sdhci_set_data_timeout_irq(host, true);
@@ -845,6 +879,8 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
u8 ctrl;
struct mmc_data *data = cmd->data;
+ host->data_timeout = 0;
+
if (sdhci_data_line_cmd(cmd))
sdhci_set_timeout(host, cmd);
@@ -1198,13 +1234,6 @@ void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
mdelay(1);
}
- timeout = jiffies;
- if (!cmd->data && cmd->busy_timeout > 9000)
- timeout += DIV_ROUND_UP(cmd->busy_timeout, 1000) * HZ + HZ;
- else
- timeout += 10 * HZ;
- sdhci_mod_timer(host, cmd->mrq, timeout);
-
host->cmd = cmd;
if (sdhci_data_line_cmd(cmd)) {
WARN_ON(host->data_cmd);
@@ -1244,6 +1273,15 @@ void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
cmd->opcode == MMC_SEND_TUNING_BLOCK_HS200)
flags |= SDHCI_CMD_DATA;
+ timeout = jiffies;
+ if (host->data_timeout)
+ timeout += nsecs_to_jiffies(host->data_timeout);
+ else if (!cmd->data && cmd->busy_timeout > 9000)
+ timeout += DIV_ROUND_UP(cmd->busy_timeout, 1000) * HZ + HZ;
+ else
+ timeout += 10 * HZ;
+ sdhci_mod_timer(host, cmd->mrq, timeout);
+
sdhci_writew(host, SDHCI_MAKE_CMD(cmd->opcode, flags), SDHCI_COMMAND);
}
EXPORT_SYMBOL_GPL(sdhci_send_command);
@@ -332,6 +332,14 @@ struct sdhci_adma2_64_desc {
/* Allow for a a command request and a data request at the same time */
#define SDHCI_MAX_MRQS 2
+/*
+ * 48bit command and 136 bit response in 100KHz clock could take upto 2.48ms.
+ * However since the start time of the command, the time between
+ * command and response, and the time between response and start of data is
+ * not known, set the command transfer time to 10ms.
+ */
+#define MMC_CMD_TRANSFER_TIME (10 * NSEC_PER_MSEC) /* max 10 ms */
+
enum sdhci_cookie {
COOKIE_UNMAPPED,
COOKIE_PRE_MAPPED, /* mapped by sdhci_pre_req() */
@@ -555,6 +563,8 @@ struct sdhci_host {
/* Host SDMA buffer boundary. */
u32 sdma_boundary;
+ u64 data_timeout;
+
unsigned long private[0] ____cacheline_aligned;
};