@@ -24,111 +24,159 @@
#include <malloc.h>
#include <common.h>
#include <asm/io.h>
+#include <libfdt.h>
+#include <fdtdec.h>
#include <i2c.h>
#include <i2s.h>
#include <sound.h>
-#include "wm8994.h"
#include <asm/arch/sound.h>
+#include "wm8994.h"
/* defines */
#define SOUND_400_HZ 400
#define SOUND_BITS_IN_BYTE 8
static struct i2stx_info g_i2stx_pri;
-static struct sound_codec_info g_codec_info;
/*
- * get_sound_fdt_values gets fdt values for i2s parameters
+ * get_sound_i2s_values gets values for i2s parameters
*
* @param i2stx_info i2s transmitter transfer param structure
- * @param blob FDT blob
- */
-static void get_sound_i2s_values(struct i2stx_info *i2s)
-{
- i2s->base_address = samsung_get_base_i2s();
- i2s->audio_pll_clk = I2S_PLL_CLK;
- i2s->samplingrate = I2S_SAMPLING_RATE;
- i2s->bitspersample = I2S_BITS_PER_SAMPLE;
- i2s->channels = I2S_CHANNELS;
- i2s->rfs = I2S_RFS;
- i2s->bfs = I2S_BFS;
-}
-
-/*
- * Gets fdt values for wm8994 config parameters
- *
- * @param pcodec_info codec information structure
- * @param blob FDT blob
- * @return int value, 0 for success
+ * @param blob FDT blob if enabled else NULL
*/
-static int get_sound_wm8994_values(struct sound_codec_info *pcodec_info)
+static int get_sound_i2s_values(struct i2stx_info *i2s, const void *blob)
{
+#ifdef CONFIG_OF_CONTROL
+ int node;
int error = 0;
+ int base;
- switch (AUDIO_COMPAT) {
- case AUDIO_COMPAT_SPI:
- debug("%s: Support not added for SPI interface\n", __func__);
+ node = fdtdec_next_compatible(blob, 0,
+ COMPAT_SAMSUNG_EXYNOS5_SOUND);
+ if (node <= 0) {
+ debug("EXYNOS_SOUND: No node for sound in device tree\n");
return -1;
- break;
- case AUDIO_COMPAT_I2C:
- pcodec_info->i2c_bus = AUDIO_I2C_BUS;
- pcodec_info->i2c_dev_addr = AUDIO_I2C_REG;
- debug("i2c dev addr = %d\n", pcodec_info->i2c_dev_addr);
- break;
- default:
- debug("%s: Unknown compat id %d\n", __func__, AUDIO_COMPAT);
+ }
+
+ /*
+ * Get the pre-defined sound specific values from FDT.
+ * All of these are expected to be correct otherwise
+ * wrong register values in i2s setup parameters
+ * may result in no sound play.
+ */
+ base = fdtdec_get_addr(blob, node, "reg");
+ if (base == FDT_ADDR_T_NONE) {
+ debug("%s: Missing i2s base\n", __func__);
return -1;
}
+ i2s->base_address = base;
+ i2s->audio_pll_clk = fdtdec_get_int(blob,
+ node, "samsung,i2s-epll-clock-frequency", -1);
+ error |= i2s->audio_pll_clk;
+ debug("audio_pll_clk = %d\n", i2s->audio_pll_clk);
+ i2s->samplingrate = fdtdec_get_int(blob,
+ node, "samsung,i2s-sampling-rate", -1);
+ error |= i2s->samplingrate;
+ debug("samplingrate = %d\n", i2s->samplingrate);
+ i2s->bitspersample = fdtdec_get_int(blob,
+ node, "samsung,i2s-bits-per-sample", -1);
+ error |= i2s->bitspersample;
+ debug("bitspersample = %d\n", i2s->bitspersample);
+ i2s->channels = fdtdec_get_int(blob,
+ node, "samsung,i2s-channels", -1);
+ error |= i2s->channels;
+ debug("channels = %d\n", i2s->channels);
+ i2s->rfs = fdtdec_get_int(blob,
+ node, "samsung,i2s-lr-clk-framesize", -1);
+ error |= i2s->rfs;
+ debug("rfs = %d\n", i2s->rfs);
+ i2s->bfs = fdtdec_get_int(blob,
+ node, "samsung,i2s-bit-clk-framesize", -1);
+ error |= i2s->bfs;
+ debug("bfs = %d\n", i2s->bfs);
if (error == -1) {
- debug("fail to get wm8994 codec node properties\n");
+ debug("fail to get sound i2s node properties\n");
return -1;
}
-
+#else
+ i2s->base_address = samsung_get_base_i2s();
+ i2s->audio_pll_clk = I2S_PLL_CLK;
+ i2s->samplingrate = I2S_SAMPLING_RATE;
+ i2s->bitspersample = I2S_BITS_PER_SAMPLE;
+ i2s->channels = I2S_CHANNELS;
+ i2s->rfs = I2S_RFS;
+ i2s->bfs = I2S_BFS;
+#endif
return 0;
}
/*
- * Gets fdt values for codec config parameters
+ * Init codec
*
- * @param pcodec_info codec information structure
- * @param blob FDT blob
- * @return int value, 0 for success
+ * @param blob FDT blob
+ * @param pi2s_tx i2s parameters required by codec
+ * @return int value, 0 for success
*/
-static int get_sound_codec_values(struct sound_codec_info *pcodec_info)
+static int codec_init(const void *blob, struct i2stx_info *pi2s_tx)
{
- int error = 0;
+ int ret;
const char *codectype;
+#ifdef CONFIG_OF_CONTROL
+ int node;
- codectype = AUDIO_CODEC;
+ /* Get the node from FDT for sound */
+ node = fdtdec_next_compatible(blob, 0, COMPAT_SAMSUNG_EXYNOS5_SOUND);
+ if (node <= 0) {
+ debug("EXYNOS_SOUND: No node for sound in device tree\n");
+ debug("node = %d\n", node);
+ return -1;
+ }
+ /*
+ * Get the pre-defined sound codec specific values from FDT.
+ * All of these are expected to be correct otherwise sound
+ * can not be played
+ */
+ codectype = fdt_getprop(blob, node, "samsung,codec-type", NULL);
+ debug("device = %s\n", codectype);
+#else
+ codectype = AUDIO_CODEC;
+#endif
if (!strcmp(codectype, "wm8994")) {
- pcodec_info->codec_type = CODEC_WM_8994;
- error = get_sound_wm8994_values(pcodec_info);
+ /* Check the codec type and initialise the same */
+ ret = wm8994_init(blob, WM8994_AIF2,
+ pi2s_tx->samplingrate,
+ (pi2s_tx->samplingrate * (pi2s_tx->rfs)),
+ pi2s_tx->bitspersample, pi2s_tx->channels);
} else {
- error = -1;
+ debug("%s: Unknown code type %s\n", __func__,
+ codectype);
+ return -1;
}
-
- if (error == -1) {
- debug("fail to get sound codec node properties\n");
+ if (ret) {
+ debug("%s: Codec init failed\n", __func__);
return -1;
}
return 0;
}
-int sound_init(void)
+int sound_init(const void *blob)
{
int ret;
struct i2stx_info *pi2s_tx = &g_i2stx_pri;
- struct sound_codec_info *pcodec_info = &g_codec_info;
/* Get the I2S Values */
- get_sound_i2s_values(pi2s_tx);
+ if (get_sound_i2s_values(pi2s_tx, blob) < 0) {
+ debug(" FDT I2S values failed\n");
+ return -1;
+ }
- /* Get the codec Values */
- if (get_sound_codec_values(pcodec_info) < 0)
+ if (codec_init(blob, pi2s_tx) < 0) {
+ debug(" Codec init failed\n");
return -1;
+ }
ret = i2s_tx_init(pi2s_tx);
if (ret) {
@@ -137,21 +185,6 @@ int sound_init(void)
return ret;
}
- /* Check the codec type and initialise the same */
- if (pcodec_info->codec_type == CODEC_WM_8994) {
- ret = wm8994_init(pcodec_info, WM8994_AIF2,
- pi2s_tx->samplingrate,
- (pi2s_tx->samplingrate * (pi2s_tx->rfs)),
- pi2s_tx->bitspersample, pi2s_tx->channels);
- } else {
- debug("%s: Unknown code type %d\n", __func__,
- pcodec_info->codec_type);
- return -1;
- }
- if (ret) {
- debug("%s: Codec init failed\n", __func__);
- return -1;
- }
return ret;
}
@@ -46,10 +46,10 @@ struct sound_codec_info {
/*
* Initialises audio sub system
- *
+ * @param blob Pointer of device tree node or NULL if none.
* @return int value 0 for success, -1 for error
*/
-int sound_init(void);
+int sound_init(const void *blob);
/*
* plays the pcm data buffer in pcm_data.h through i2s1 to make the
This patch adds FDT support to the sound driver. Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> --- Changes in V2: - Made single function to get i2s values,codec init and sount init in both FDT and non FDT support case. Changes in V3: - Removed #ifdef CONFIG_OF_CONTROL where ever not required. drivers/sound/sound.c | 173 +++++++++++++++++++++++++++++-------------------- include/sound.h | 4 +- 2 files changed, 105 insertions(+), 72 deletions(-)