deleted file mode 100644
@@ -1,74 +0,0 @@
-## @file
-#
-# Component description file PCI Host Bridge driver.
-# Copyright (c) 2014, AppliedMicro Corp. All rights reserved.
-# Copyright (c) 2016, Hisilicon Limited. All rights reserved.
-# Copyright (c) 2016, Linaro Limited. All rights reserved.
-#
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-##
-
-[Defines]
- INF_VERSION = 0x00010005
- BASE_NAME = PciHostBridge
- FILE_GUID = B0E61270-263F-11E3-8224-0800200C9A66
- MODULE_TYPE = DXE_DRIVER
- VERSION_STRING = 1.0
-
- ENTRY_POINT = InitializePciHostBridge
-
-[Packages]
- MdePkg/MdePkg.dec
- ArmPkg/ArmPkg.dec
- ArmPlatformPkg/ArmPlatformPkg.dec
- EmbeddedPkg/EmbeddedPkg.dec
- Silicon/Hisilicon/HisiPkg.dec
-
-[LibraryClasses]
- UefiDriverEntryPoint
- UefiBootServicesTableLib
- MemoryAllocationLib
- DxeServicesTableLib
- CacheMaintenanceLib
- DmaLib
- BaseMemoryLib
- BaseLib
- DebugLib
- TimerLib
- ArmLib
- DevicePathLib
- PcdLib
- OemMiscLib
-
-[Sources]
- PciHostBridge.c
- PciRootBridgeIo.c
- PciHostBridge.h
-
-[Protocols]
- gEfiPciHostBridgeResourceAllocationProtocolGuid
- gEfiPciRootBridgeIoProtocolGuid
- gEfiMetronomeArchProtocolGuid
- gEfiDevicePathProtocolGuid
- gEmbeddedGpioProtocolGuid
-
-[depex]
- gEfiMetronomeArchProtocolGuid
-
-[FeaturePcd]
-
-[Pcd]
-
-[FixedPcd]
- gHisiTokenSpaceGuid.PcdPcieRootBridgeMask
- gHisiTokenSpaceGuid.PcdPcieRootBridgeMask2P
- gHisiTokenSpaceGuid.Pcdsoctype
-
-[Guids]
- gEfiEventExitBootServicesGuid ## PRODUCES ## Event
deleted file mode 100644
@@ -1,520 +0,0 @@
-/**
- * Copyright (c) 2014, AppliedMicro Corp. All rights reserved.
- * Copyright (c) 2016, Hisilicon Limited. All rights reserved.
- * Copyright (c) 2016, Linaro Limited. All rights reserved.
- *
- * This program and the accompanying materials
- * are licensed and made available under the terms and conditions of the BSD License
- * which accompanies this distribution. The full text of the license may be found at
- * http://opensource.org/licenses/bsd-license.php
- *
- * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
- *
- **/
-
-#ifndef _PCI_HOST_BRIDGE_H_
-#define _PCI_HOST_BRIDGE_H_
-
-#include <PiDxe.h>
-
-#include <IndustryStandard/Pci.h>
-#include <IndustryStandard/Acpi.h>
-
-#include <Protocol/PciHostBridgeResourceAllocation.h>
-#include <Protocol/PciRootBridgeIo.h>
-#include <Protocol/Metronome.h>
-#include <Protocol/DevicePath.h>
-#include <Protocol/PciIo.h>
-#include <Protocol/CpuIo2.h>
-
-
-#include <Library/BaseLib.h>
-#include <Library/DebugLib.h>
-#include <Library/BaseMemoryLib.h>
-#include <Library/MemoryAllocationLib.h>
-#include <Library/UefiLib.h>
-#include <Library/UefiBootServicesTableLib.h>
-#include <Library/DxeServicesTableLib.h>
-#include <Library/DevicePathLib.h>
-#include <Library/IoLib.h>
-#include <Library/PciLib.h>
-#include <Library/PcdLib.h>
-#include <Library/PlatformPciLib.h>
-
-// Enable below statments to enable PCIE debug
-//#define PCIE_DEBUG_ENABLE
-//#define PCIE_VDEBUG_ENABLE
-//#define PCIE_CDEBUG_ENABLE
-
-#ifdef PCIE_CDEBUG_ENABLE
-# define PCIE_CSR_DEBUG(arg...) DEBUG((EFI_D_VERBOSE,## arg))
-#else
-# define PCIE_CSR_DEBUG(arg...)
-#endif
-
-#ifdef PCIE_VDEBUG_ENABLE
-# define PCIE_VDEBUG(arg...) DEBUG((EFI_D_VERBOSE,## arg))
-#else
-# define PCIE_VDEBUG(arg...)
-#endif
-
-#ifdef PCIE_DEBUG_ENABLE
-# define PCIE_DEBUG(arg...) DEBUG((EFI_D_VERBOSE,## arg))
-#else
-# define PCIE_DEBUG(arg...)
-#endif
-#define PCIE_WARN(arg...) DEBUG((EFI_D_WARN,## arg))
-#define PCIE_ERR(arg...) DEBUG((EFI_D_ERROR,## arg))
-#define PCIE_INFO(arg...) DEBUG((EFI_D_INFO,## arg))
-
-#define MAX_PCI_DEVICE_NUMBER 31
-#define MAX_PCI_FUNCTION_NUMBER 7
-#define MAX_PCI_REG_ADDRESS 0xFFFF
-
-typedef enum {
- IoOperation,
- MemOperation,
- PciOperation
-} OPERATION_TYPE;
-
-#define PCI_HOST_BRIDGE_SIGNATURE SIGNATURE_32('e', 'h', 's', 't')
-typedef struct {
- UINTN Signature;
- EFI_HANDLE HostBridgeHandle;
- UINTN RootBridgeNumber;
- LIST_ENTRY Head;
- BOOLEAN ResourceSubmited;
- BOOLEAN CanRestarted;
- EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL ResAlloc;
-} PCI_HOST_BRIDGE_INSTANCE;
-
-#define INSTANCE_FROM_RESOURCE_ALLOCATION_THIS(a) \
- CR(a, PCI_HOST_BRIDGE_INSTANCE, ResAlloc, PCI_HOST_BRIDGE_SIGNATURE)
-
-//
-// HostBridge Resource Allocation interface
-//
-
-/**
- These are the notifications from the PCI bus driver that it is about to enter a certain
- phase of the PCI enumeration process.
-
- This member function can be used to notify the host bridge driver to perform specific actions,
- including any chipset-specific initialization, so that the chipset is ready to enter the next phase.
- Eight notification points are defined at this time. See belows:
- EfiPciHostBridgeBeginEnumeration Resets the host bridge PCI apertures and internal data
- structures. The PCI enumerator should issue this notification
- before starting a fresh enumeration process. Enumeration cannot
- be restarted after sending any other notification such as
- EfiPciHostBridgeBeginBusAllocation.
- EfiPciHostBridgeBeginBusAllocation The bus allocation phase is about to begin. No specific action is
- required here. This notification can be used to perform any
- chipset-specific programming.
- EfiPciHostBridgeEndBusAllocation The bus allocation and bus programming phase is complete. No
- specific action is required here. This notification can be used to
- perform any chipset-specific programming.
- EfiPciHostBridgeBeginResourceAllocation
- The resource allocation phase is about to begin. No specific
- action is required here. This notification can be used to perform
- any chipset-specific programming.
- EfiPciHostBridgeAllocateResources Allocates resources per previously submitted requests for all the PCI
- root bridges. These resource settings are returned on the next call to
- GetProposedResources(). Before calling NotifyPhase() with a Phase of
- EfiPciHostBridgeAllocateResource, the PCI bus enumerator is responsible
- for gathering I/O and memory requests for
- all the PCI root bridges and submitting these requests using
- SubmitResources(). This function pads the resource amount
- to suit the root bridge hardware, takes care of dependencies between
- the PCI root bridges, and calls the Global Coherency Domain (GCD)
- with the allocation request. In the case of padding, the allocated range
- could be bigger than what was requested.
- EfiPciHostBridgeSetResources Programs the host bridge hardware to decode previously allocated
- resources (proposed resources) for all the PCI root bridges. After the
- hardware is programmed, reassigning resources will not be supported.
- The bus settings are not affected.
- EfiPciHostBridgeFreeResources Deallocates resources that were previously allocated for all the PCI
- root bridges and resets the I/O and memory apertures to their initial
- state. The bus settings are not affected. If the request to allocate
- resources fails, the PCI enumerator can use this notification to
- deallocate previous resources, adjust the requests, and retry
- allocation.
- EfiPciHostBridgeEndResourceAllocation The resource allocation phase is completed. No specific action is
- required here. This notification can be used to perform any chipsetspecific
- programming.
-
- @param[in] This The instance pointer of EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
- @param[in] Phase The phase during enumeration
-
- @retval EFI_NOT_READY This phase cannot be entered at this time. For example, this error
- is valid for a Phase of EfiPciHostBridgeAllocateResources if
- SubmitResources() has not been called for one or more
- PCI root bridges before this call
- @retval EFI_DEVICE_ERROR Programming failed due to a hardware error. This error is valid
- for a Phase of EfiPciHostBridgeSetResources.
- @retval EFI_INVALID_PARAMETER Invalid phase parameter
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
- This error is valid for a Phase of EfiPciHostBridgeAllocateResources if the
- previously submitted resource requests cannot be fulfilled or
- were only partially fulfilled.
- @retval EFI_SUCCESS The notification was accepted without any errors.
-
-**/
-EFI_STATUS
-EFIAPI
-NotifyPhase(
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PHASE Phase
- );
-
-/**
- Return the device handle of the next PCI root bridge that is associated with this Host Bridge.
-
- This function is called multiple times to retrieve the device handles of all the PCI root bridges that
- are associated with this PCI host bridge. Each PCI host bridge is associated with one or more PCI
- root bridges. On each call, the handle that was returned by the previous call is passed into the
- interface, and on output the interface returns the device handle of the next PCI root bridge. The
- caller can use the handle to obtain the instance of the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL
- for that root bridge. When there are no more PCI root bridges to report, the interface returns
- EFI_NOT_FOUND. A PCI enumerator must enumerate the PCI root bridges in the order that they
- are returned by this function.
- For D945 implementation, there is only one root bridge in PCI host bridge.
-
- @param[in] This The instance pointer of EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
- @param[in, out] RootBridgeHandle Returns the device handle of the next PCI root bridge.
-
- @retval EFI_SUCCESS If parameter RootBridgeHandle = NULL, then return the first Rootbridge handle of the
- specific Host bridge and return EFI_SUCCESS.
- @retval EFI_NOT_FOUND Can not find the any more root bridge in specific host bridge.
- @retval EFI_INVALID_PARAMETER RootBridgeHandle is not an EFI_HANDLE that was
- returned on a previous call to GetNextRootBridge().
-**/
-EFI_STATUS
-EFIAPI
-GetNextRootBridge(
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
- IN OUT EFI_HANDLE *RootBridgeHandle
- );
-
-/**
- Returns the allocation attributes of a PCI root bridge.
-
- The function returns the allocation attributes of a specific PCI root bridge. The attributes can vary
- from one PCI root bridge to another. These attributes are different from the decode-related
- attributes that are returned by the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.GetAttributes() member function. The
- RootBridgeHandle parameter is used to specify the instance of the PCI root bridge. The device
- handles of all the root bridges that are associated with this host bridge must be obtained by calling
- GetNextRootBridge(). The attributes are static in the sense that they do not change during or
- after the enumeration process. The hardware may provide mechanisms to change the attributes on
- the fly, but such changes must be completed before EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL is
- installed. The permitted values of EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ATTRIBUTES are defined in
- "Related Definitions" below. The caller uses these attributes to combine multiple resource requests.
- For example, if the flag EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM is set, the PCI bus enumerator needs to
- include requests for the prefetchable memory in the nonprefetchable memory pool and not request any
- prefetchable memory.
- Attribute Description
- ------------------------------------ ----------------------------------------------------------------------
- EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM If this bit is set, then the PCI root bridge does not support separate
- windows for nonprefetchable and prefetchable memory. A PCI bus
- driver needs to include requests for prefetchable memory in the
- nonprefetchable memory pool.
-
- EFI_PCI_HOST_BRIDGE_MEM64_DECODE If this bit is set, then the PCI root bridge supports 64-bit memory
- windows. If this bit is not set, the PCI bus driver needs to include
- requests for a 64-bit memory address in the corresponding 32-bit
- memory pool.
-
- @param[in] This The instance pointer of EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
- @param[in] RootBridgeHandle The device handle of the PCI root bridge in which the caller is interested. Type
- EFI_HANDLE is defined in InstallProtocolInterface() in the UEFI 2.0 Specification.
- @param[out] Attributes The pointer to attribte of root bridge, it is output parameter
-
- @retval EFI_INVALID_PARAMETER Attribute pointer is NULL
- @retval EFI_INVALID_PARAMETER RootBridgehandle is invalid.
- @retval EFI_SUCCESS Success to get attribute of interested root bridge.
-
-**/
-EFI_STATUS
-EFIAPI
-GetAttributes(
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
- IN EFI_HANDLE RootBridgeHandle,
- OUT UINT64 *Attributes
- );
-
-/**
- Sets up the specified PCI root bridge for the bus enumeration process.
-
- This member function sets up the root bridge for bus enumeration and returns the PCI bus range
- over which the search should be performed in ACPI 2.0 resource descriptor format.
-
- @param[in] This The EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ PROTOCOL instance.
- @param[in] RootBridgeHandle The PCI Root Bridge to be set up.
- @param[out] Configuration Pointer to the pointer to the PCI bus resource descriptor.
-
- @retval EFI_INVALID_PARAMETER Invalid Root bridge's handle
- @retval EFI_OUT_OF_RESOURCES Fail to allocate ACPI resource descriptor tag.
- @retval EFI_SUCCESS Sucess to allocate ACPI resource descriptor.
-
-**/
-EFI_STATUS
-EFIAPI
-StartBusEnumeration(
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
- IN EFI_HANDLE RootBridgeHandle,
- OUT VOID **Configuration
- );
-
-/**
- Programs the PCI root bridge hardware so that it decodes the specified PCI bus range.
-
- This member function programs the specified PCI root bridge to decode the bus range that is
- specified by the input parameter Configuration.
- The bus range information is specified in terms of the ACPI 2.0 resource descriptor format.
-
- @param[in] This The EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ PROTOCOL instance
- @param[in] RootBridgeHandle The PCI Root Bridge whose bus range is to be programmed
- @param[in] Configuration The pointer to the PCI bus resource descriptor
-
- @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge handle.
- @retval EFI_INVALID_PARAMETER Configuration is NULL.
- @retval EFI_INVALID_PARAMETER Configuration does not point to a valid ACPI 2.0 resource descriptor.
- @retval EFI_INVALID_PARAMETER Configuration does not include a valid ACPI 2.0 bus resource descriptor.
- @retval EFI_INVALID_PARAMETER Configuration includes valid ACPI 2.0 resource descriptors other than
- bus descriptors.
- @retval EFI_INVALID_PARAMETER Configuration contains one or more invalid ACPI resource descriptors.
- @retval EFI_INVALID_PARAMETER "Address Range Minimum" is invalid for this root bridge.
- @retval EFI_INVALID_PARAMETER "Address Range Length" is invalid for this root bridge.
- @retval EFI_DEVICE_ERROR Programming failed due to a hardware error.
- @retval EFI_SUCCESS The bus range for the PCI root bridge was programmed.
-
-**/
-EFI_STATUS
-EFIAPI
-SetBusNumbers(
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
- IN EFI_HANDLE RootBridgeHandle,
- IN VOID *Configuration
- );
-
-/**
- Submits the I/O and memory resource requirements for the specified PCI root bridge.
-
- This function is used to submit all the I/O and memory resources that are required by the specified
- PCI root bridge. The input parameter Configuration is used to specify the following:
- - The various types of resources that are required
- - The associated lengths in terms of ACPI 2.0 resource descriptor format
-
- @param[in] This Pointer to the EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL instance.
- @param[in] RootBridgeHandle The PCI root bridge whose I/O and memory resource requirements are being submitted.
- @param[in] Configuration The pointer to the PCI I/O and PCI memory resource descriptor.
-
- @retval EFI_SUCCESS The I/O and memory resource requests for a PCI root bridge were accepted.
- @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge handle.
- @retval EFI_INVALID_PARAMETER Configuration is NULL.
- @retval EFI_INVALID_PARAMETER Configuration does not point to a valid ACPI 2.0 resource descriptor.
- @retval EFI_INVALID_PARAMETER Configuration includes requests for one or more resource types that are
- not supported by this PCI root bridge. This error will happen if the caller
- did not combine resources according to Attributes that were returned by
- GetAllocAttributes().
- @retval EFI_INVALID_PARAMETER Address Range Maximum" is invalid.
- @retval EFI_INVALID_PARAMETER "Address Range Length" is invalid for this PCI root bridge.
- @retval EFI_INVALID_PARAMETER "Address Space Granularity" is invalid for this PCI root bridge.
-
-**/
-EFI_STATUS
-EFIAPI
-SubmitResources(
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
- IN EFI_HANDLE RootBridgeHandle,
- IN VOID *Configuration
- );
-
-/**
- Returns the proposed resource settings for the specified PCI root bridge.
-
- This member function returns the proposed resource settings for the specified PCI root bridge. The
- proposed resource settings are prepared when NotifyPhase() is called with a Phase of
- EfiPciHostBridgeAllocateResources. The output parameter Configuration
- specifies the following:
- - The various types of resources, excluding bus resources, that are allocated
- - The associated lengths in terms of ACPI 2.0 resource descriptor format
-
- @param[in] This Pointer to the EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL instance.
- @param[in] RootBridgeHandle The PCI root bridge handle. Type EFI_HANDLE is defined in InstallProtocolInterface() in the UEFI 2.0 Specification.
- @param[out] Configuration The pointer to the pointer to the PCI I/O and memory resource descriptor.
-
- @retval EFI_SUCCESS The requested parameters were returned.
- @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge handle.
- @retval EFI_DEVICE_ERROR Programming failed due to a hardware error.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-GetProposedResources(
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
- IN EFI_HANDLE RootBridgeHandle,
- OUT VOID **Configuration
- );
-
-/**
- Provides the hooks from the PCI bus driver to every PCI controller (device/function) at various
- stages of the PCI enumeration process that allow the host bridge driver to preinitialize individual
- PCI controllers before enumeration.
-
- This function is called during the PCI enumeration process. No specific action is expected from this
- member function. It allows the host bridge driver to preinitialize individual PCI controllers before
- enumeration.
-
- @param This Pointer to the EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL instance.
- @param RootBridgeHandle The associated PCI root bridge handle. Type EFI_HANDLE is defined in
- InstallProtocolInterface() in the UEFI 2.0 Specification.
- @param PciAddress The address of the PCI device on the PCI bus. This address can be passed to the
- EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL member functions to access the PCI
- configuration space of the device. See Table 12-1 in the UEFI 2.0 Specification for
- the definition of EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS.
- @param Phase The phase of the PCI device enumeration.
-
- @retval EFI_SUCCESS The requested parameters were returned.
- @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge handle.
- @retval EFI_INVALID_PARAMETER Phase is not a valid phase that is defined in
- EFI_PCI_CONTROLLER_RESOURCE_ALLOCATION_PHASE.
- @retval EFI_DEVICE_ERROR Programming failed due to a hardware error. The PCI enumerator should
- not enumerate this device, including its child devices if it is a PCI-to-PCI
- bridge.
-
-**/
-EFI_STATUS
-EFIAPI
-PreprocessController (
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
- IN EFI_HANDLE RootBridgeHandle,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS PciAddress,
- IN EFI_PCI_CONTROLLER_RESOURCE_ALLOCATION_PHASE Phase
- );
-
-
-//
-// Define resource status constant
-//
-#define EFI_RESOURCE_NONEXISTENT 0xFFFFFFFFFFFFFFFFULL
-#define EFI_RESOURCE_LESS 0xFFFFFFFFFFFFFFFEULL
-
-//
-// Driver Instance Data Prototypes
-//
-
-typedef struct {
- EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_OPERATION Operation;
- UINTN NumberOfBytes;
- UINTN NumberOfPages;
- EFI_PHYSICAL_ADDRESS HostAddress;
- EFI_PHYSICAL_ADDRESS MappedHostAddress;
-} MAP_INFO;
-
-typedef struct {
- ACPI_HID_DEVICE_PATH AcpiDevicePath;
- EFI_DEVICE_PATH_PROTOCOL EndDevicePath;
-} EFI_PCI_ROOT_BRIDGE_DEVICE_PATH;
-
-typedef enum {
- TypeIo = 0,
- TypeMem32,
- TypePMem32,
- TypeMem64,
- TypePMem64,
- TypeBus,
- TypeMax
-} PCI_RESOURCE_TYPE;
-
-typedef enum {
- ResNone = 0,
- ResSubmitted,
- ResRequested,
- ResAllocated,
- ResStatusMax
-} RES_STATUS;
-
-typedef struct {
- PCI_RESOURCE_TYPE Type;
- UINT64 Base;
- UINT64 Length;
- UINT64 Alignment;
- RES_STATUS Status;
-} PCI_RES_NODE;
-
-#define PCI_ROOT_BRIDGE_SIGNATURE SIGNATURE_32('e', '2', 'p', 'b')
-
-typedef struct {
- UINT32 Signature;
- LIST_ENTRY Link;
- EFI_HANDLE Handle;
- UINT64 RootBridgeAttrib;
- UINT64 Attributes;
- UINT64 Supports;
-
- //
- // Specific for this memory controller: Bus, I/O, Mem
- //
- PCI_RES_NODE ResAllocNode[6];
-
- //
- // Addressing for Memory and I/O and Bus arrange
- //
- UINT64 BusBase;
- UINT64 MemBase;
- UINT64 IoBase;
- UINT64 BusLimit;
- UINT64 MemLimit;
- UINT64 IoLimit;
- UINT64 RbPciBar;
- UINT64 Ecam;
-
- UINTN PciAddress;
- UINTN PciData;
- UINTN Port;
- UINT32 SocType;
- UINT64 CpuMemRegionBase;
- UINT64 CpuIoRegionBase;
- UINT64 PciRegionBase;
- UINT64 PciRegionLimit;
-
- EFI_DEVICE_PATH_PROTOCOL *DevicePath;
- EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL Io;
-
-} PCI_ROOT_BRIDGE_INSTANCE;
-
-
-//
-// Driver Instance Data Macros
-//
-#define DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS(a) \
- CR(a, PCI_ROOT_BRIDGE_INSTANCE, Io, PCI_ROOT_BRIDGE_SIGNATURE)
-
-
-#define DRIVER_INSTANCE_FROM_LIST_ENTRY(a) \
- CR(a, PCI_ROOT_BRIDGE_INSTANCE, Link, PCI_ROOT_BRIDGE_SIGNATURE)
-
-/**
-
- Construct the Pci Root Bridge Io protocol
-
- @param Protocol Point to protocol instance
- @param HostBridgeHandle Handle of host bridge
- @param Attri Attribute of host bridge
- @param ResAppeture ResourceAppeture for host bridge
-
- @retval EFI_SUCCESS Success to initialize the Pci Root Bridge.
-
-**/
-EFI_STATUS
-RootBridgeConstructor (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *Protocol,
- IN EFI_HANDLE HostBridgeHandle,
- IN UINT64 Attri,
- IN PCI_ROOT_BRIDGE_RESOURCE_APPETURE *ResAppeture,
- IN UINT32 Seg
- );
-
-#endif
deleted file mode 100644
@@ -1,1658 +0,0 @@
-/**
- * Copyright (c) 2014, AppliedMicro Corp. All rights reserved.
- * Copyright (c) 2016, Hisilicon Limited. All rights reserved.
- * Copyright (c) 2016, Linaro Limited. All rights reserved.
- *
- * This program and the accompanying materials
- * are licensed and made available under the terms and conditions of the BSD License
- * which accompanies this distribution. The full text of the license may be found at
- * http://opensource.org/licenses/bsd-license.php
- *
- * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
- *
- **/
-
-#include <Uefi.h>
-#include <Protocol/EmbeddedGpio.h>
-#include <Guid/EventGroup.h>
-#include <Library/UefiBootServicesTableLib.h>
-#include <Library/UefiRuntimeServicesTableLib.h>
-#include <Library/OemMiscLib.h>
-
-#include "PciHostBridge.h"
-
-UINTN RootBridgeNumber[PCIE_MAX_HOSTBRIDGE] = { PCIE_MAX_ROOTBRIDGE,PCIE_MAX_ROOTBRIDGE };
-
-UINT64 RootBridgeAttribute[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_ROOTBRIDGE] = {
- { //Host Bridge0
- EFI_PCI_HOST_BRIDGE_MEM64_DECODE,
- EFI_PCI_HOST_BRIDGE_MEM64_DECODE,
- EFI_PCI_HOST_BRIDGE_MEM64_DECODE,
- EFI_PCI_HOST_BRIDGE_MEM64_DECODE,
- EFI_PCI_HOST_BRIDGE_MEM64_DECODE,
- EFI_PCI_HOST_BRIDGE_MEM64_DECODE,
- EFI_PCI_HOST_BRIDGE_MEM64_DECODE,
- EFI_PCI_HOST_BRIDGE_MEM64_DECODE,
- },
- { //Host Bridge1
- EFI_PCI_HOST_BRIDGE_MEM64_DECODE,
- EFI_PCI_HOST_BRIDGE_MEM64_DECODE,
- EFI_PCI_HOST_BRIDGE_MEM64_DECODE,
- EFI_PCI_HOST_BRIDGE_MEM64_DECODE,
- EFI_PCI_HOST_BRIDGE_MEM64_DECODE,
- EFI_PCI_HOST_BRIDGE_MEM64_DECODE,
- EFI_PCI_HOST_BRIDGE_MEM64_DECODE,
- EFI_PCI_HOST_BRIDGE_MEM64_DECODE,
- }
- };
-
-EFI_PCI_ROOT_BRIDGE_DEVICE_PATH mEfiPciRootBridgeDevicePath[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_ROOTBRIDGE] = {
- { //Host Bridge0
- /* Port 0 */
- {
- {
- {
- ACPI_DEVICE_PATH,
- ACPI_DP,
- {
- (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)),
- (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8)
- }
- },
- EISA_PNP_ID(0x0A03),
- 0
- },
-
- {
- END_DEVICE_PATH_TYPE,
- END_ENTIRE_DEVICE_PATH_SUBTYPE,
- {
- END_DEVICE_PATH_LENGTH,
- 0
- }
- }
- },
- /* Port 1 */
- {
- {
- {
- ACPI_DEVICE_PATH,
- ACPI_DP,
- {
- (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)),
- (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8)
- }
- },
- EISA_PNP_ID(0x0A04),
- 0
- },
-
- {
- END_DEVICE_PATH_TYPE,
- END_ENTIRE_DEVICE_PATH_SUBTYPE,
- {
- END_DEVICE_PATH_LENGTH,
- 0
- }
- }
- },
- /* Port 2 */
- {
- {
- {
- ACPI_DEVICE_PATH,
- ACPI_DP,
- {
- (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)),
- (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8)
- }
- },
- EISA_PNP_ID(0x0A05),
- 0
- },
-
- {
- END_DEVICE_PATH_TYPE,
- END_ENTIRE_DEVICE_PATH_SUBTYPE,
- {
- END_DEVICE_PATH_LENGTH,
- 0
- }
- }
- },
- /* Port 3 */
- {
- {
- {
- ACPI_DEVICE_PATH,
- ACPI_DP,
- {
- (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)),
- (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8)
- }
- },
- EISA_PNP_ID(0x0A06),
- 0
- },
-
- {
- END_DEVICE_PATH_TYPE,
- END_ENTIRE_DEVICE_PATH_SUBTYPE,
- {
- END_DEVICE_PATH_LENGTH,
- 0
- }
- }
- },
- /* Port 4 */
- {
- {
- {
- ACPI_DEVICE_PATH,
- ACPI_DP,
- {
- (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)),
- (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8)
- }
- },
- EISA_PNP_ID(0x0A07),
- 0
- },
-
- {
- END_DEVICE_PATH_TYPE,
- END_ENTIRE_DEVICE_PATH_SUBTYPE,
- {
- END_DEVICE_PATH_LENGTH,
- 0
- }
- }
- },
- /* Port 5 */
- {
- {
- {
- ACPI_DEVICE_PATH,
- ACPI_DP,
- {
- (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)),
- (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8)
- }
- },
- EISA_PNP_ID(0x0A08),
- 0
- },
-
- {
- END_DEVICE_PATH_TYPE,
- END_ENTIRE_DEVICE_PATH_SUBTYPE,
- {
- END_DEVICE_PATH_LENGTH,
- 0
- }
- }
- },
- /* Port 6 */
- {
- {
- {
- ACPI_DEVICE_PATH,
- ACPI_DP,
- {
- (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)),
- (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8)
- }
- },
- EISA_PNP_ID(0x0A09),
- 0
- },
-
- {
- END_DEVICE_PATH_TYPE,
- END_ENTIRE_DEVICE_PATH_SUBTYPE,
- {
- END_DEVICE_PATH_LENGTH,
- 0
- }
- }
- },
- /* Port 7 */
- {
- {
- {
- ACPI_DEVICE_PATH,
- ACPI_DP,
- {
- (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)),
- (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8)
- }
- },
- EISA_PNP_ID(0x0A0A),
- 0
- },
-
- {
- END_DEVICE_PATH_TYPE,
- END_ENTIRE_DEVICE_PATH_SUBTYPE,
- {
- END_DEVICE_PATH_LENGTH,
- 0
- }
- }
- }
-},
-{ // Host Bridge1
- /* Port 0 */
- {
- {
- {
- ACPI_DEVICE_PATH,
- ACPI_DP,
- {
- (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)),
- (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8)
- }
- },
- EISA_PNP_ID(0x0A0B),
- 0
- },
-
- {
- END_DEVICE_PATH_TYPE,
- END_ENTIRE_DEVICE_PATH_SUBTYPE,
- {
- END_DEVICE_PATH_LENGTH,
- 0
- }
- }
- },
- /* Port 1 */
- {
- {
- {
- ACPI_DEVICE_PATH,
- ACPI_DP,
- {
- (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)),
- (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8)
- }
- },
- EISA_PNP_ID(0x0A0C),
- 0
- },
-
- {
- END_DEVICE_PATH_TYPE,
- END_ENTIRE_DEVICE_PATH_SUBTYPE,
- {
- END_DEVICE_PATH_LENGTH,
- 0
- }
- }
- },
- /* Port 2 */
- {
- {
- {
- ACPI_DEVICE_PATH,
- ACPI_DP,
- {
- (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)),
- (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8)
- }
- },
- EISA_PNP_ID(0x0A0D),
- 0
- },
-
- {
- END_DEVICE_PATH_TYPE,
- END_ENTIRE_DEVICE_PATH_SUBTYPE,
- {
- END_DEVICE_PATH_LENGTH,
- 0
- }
- }
- },
- /* Port 3 */
- {
- {
- {
- ACPI_DEVICE_PATH,
- ACPI_DP,
- {
- (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)),
- (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8)
- }
- },
- EISA_PNP_ID(0x0A0E),
- 0
- },
-
- {
- END_DEVICE_PATH_TYPE,
- END_ENTIRE_DEVICE_PATH_SUBTYPE,
- {
- END_DEVICE_PATH_LENGTH,
- 0
- }
- }
- },
- /* Port 4 */
- {
- {
- {
- ACPI_DEVICE_PATH,
- ACPI_DP,
- {
- (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)),
- (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8)
- }
- },
- EISA_PNP_ID(0x0A0F),
- 0
- },
-
- {
- END_DEVICE_PATH_TYPE,
- END_ENTIRE_DEVICE_PATH_SUBTYPE,
- {
- END_DEVICE_PATH_LENGTH,
- 0
- }
- }
- },
- /* Port 5 */
- {
- {
- {
- ACPI_DEVICE_PATH,
- ACPI_DP,
- {
- (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)),
- (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8)
- }
- },
- EISA_PNP_ID(0x0A10),
- 0
- },
-
- {
- END_DEVICE_PATH_TYPE,
- END_ENTIRE_DEVICE_PATH_SUBTYPE,
- {
- END_DEVICE_PATH_LENGTH,
- 0
- }
- }
- },
- /* Port 6 */
- {
- {
- {
- ACPI_DEVICE_PATH,
- ACPI_DP,
- {
- (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)),
- (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8)
- }
- },
- EISA_PNP_ID(0x0A11),
- 0
- },
-
- {
- END_DEVICE_PATH_TYPE,
- END_ENTIRE_DEVICE_PATH_SUBTYPE,
- {
- END_DEVICE_PATH_LENGTH,
- 0
- }
- }
- },
- /* Port 7 */
- {
- {
- {
- ACPI_DEVICE_PATH,
- ACPI_DP,
- {
- (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)),
- (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8)
- }
- },
- EISA_PNP_ID(0x0A12),
- 0
- },
-
- {
- END_DEVICE_PATH_TYPE,
- END_ENTIRE_DEVICE_PATH_SUBTYPE,
- {
- END_DEVICE_PATH_LENGTH,
- 0
- }
- }
- }
- }
-};
-
-EFI_HANDLE mDriverImageHandle;
-
-PCI_HOST_BRIDGE_INSTANCE mPciHostBridgeInstanceTemplate = {
- PCI_HOST_BRIDGE_SIGNATURE, // Signature
- NULL, // HostBridgeHandle
- 0, // RootBridgeNumber
- {NULL, NULL}, // Head
- FALSE, // ResourceSubiteed
- TRUE, // CanRestarted
- {
- NotifyPhase,
- GetNextRootBridge,
- GetAttributes,
- StartBusEnumeration,
- SetBusNumbers,
- SubmitResources,
- GetProposedResources,
- PreprocessController
- }
-};
-
-/**
- Entry point of this driver
-
- @param ImageHandle Handle of driver image
- @param SystemTable Point to EFI_SYSTEM_TABLE
-
- @retval EFI_OUT_OF_RESOURCES Can not allocate memory resource
- @retval EFI_DEVICE_ERROR Can not install the protocol instance
- @retval EFI_SUCCESS Success to initialize the Pci host bridge.
-**/
-EFI_STATUS
-EFIAPI
-InitializePciHostBridge (
- IN EFI_HANDLE ImageHandle,
- IN EFI_SYSTEM_TABLE *SystemTable
- )
-{
- EFI_STATUS Status;
- UINTN Loop1;
- UINTN Loop2;
- PCI_HOST_BRIDGE_INSTANCE *HostBridge = NULL;
- PCI_ROOT_BRIDGE_INSTANCE *PrivateData;
- UINT32 PcieRootBridgeMask;
-
- if (!OemIsMpBoot())
- {
- PcieRootBridgeMask = PcdGet32(PcdPcieRootBridgeMask);
- }
- else
- {
- PcieRootBridgeMask = PcdGet32(PcdPcieRootBridgeMask2P);
- }
-
- mDriverImageHandle = ImageHandle;
- //
- // Create Host Bridge Device Handle
- //
- //Each Host Bridge have 8 Root Bridges max, every bits of 0xFF(8 bit) stands for the according PCIe Port
- //is enable or not
- for (Loop1 = 0; Loop1 < PCIE_MAX_HOSTBRIDGE; Loop1++) {
- if (((PcieRootBridgeMask >> (PCIE_MAX_ROOTBRIDGE * Loop1)) & 0xFF ) == 0) {
- continue;
- }
-
-
- HostBridge = AllocateCopyPool (sizeof(PCI_HOST_BRIDGE_INSTANCE), &mPciHostBridgeInstanceTemplate);
- if (HostBridge == NULL) {
- return EFI_OUT_OF_RESOURCES;
- }
-
- HostBridge->RootBridgeNumber = RootBridgeNumber[Loop1];
- InitializeListHead (&HostBridge->Head);
-
- Status = gBS->InstallMultipleProtocolInterfaces (
- &HostBridge->HostBridgeHandle,
- &gEfiPciHostBridgeResourceAllocationProtocolGuid, &HostBridge->ResAlloc,
- NULL
- );
- if (EFI_ERROR (Status)) {
- FreePool (HostBridge);
- return EFI_DEVICE_ERROR;
- }
-
- //
- // Create Root Bridge Device Handle in this Host Bridge
- //
- for (Loop2 = 0; Loop2 < HostBridge->RootBridgeNumber; Loop2++) {
- if (!(((PcieRootBridgeMask >> (PCIE_MAX_ROOTBRIDGE * Loop1)) >> Loop2 ) & 0x01)) {
- continue;
- }
-
- PrivateData = AllocateZeroPool (sizeof(PCI_ROOT_BRIDGE_INSTANCE));
- if (PrivateData == NULL) {
- FreePool (HostBridge);
- return EFI_OUT_OF_RESOURCES;
- }
- PrivateData->Port = Loop2;
- PrivateData->SocType = PcdGet32(Pcdsoctype);
- PrivateData->Signature = PCI_ROOT_BRIDGE_SIGNATURE;
- PrivateData->DevicePath = (EFI_DEVICE_PATH_PROTOCOL *)&mEfiPciRootBridgeDevicePath[Loop1][Loop2];
-
- (VOID)RootBridgeConstructor (
- &PrivateData->Io,
- HostBridge->HostBridgeHandle,
- RootBridgeAttribute[Loop1][Loop2],
- &mResAppeture[Loop1][Loop2],
- Loop1
- );
-
- Status = gBS->InstallMultipleProtocolInterfaces(
- &PrivateData->Handle,
- &gEfiDevicePathProtocolGuid, PrivateData->DevicePath,
- &gEfiPciRootBridgeIoProtocolGuid, &PrivateData->Io,
- NULL
- );
- if (EFI_ERROR (Status)) {
- (VOID)gBS->UninstallMultipleProtocolInterfaces (
- HostBridge->HostBridgeHandle,
- &gEfiPciHostBridgeResourceAllocationProtocolGuid, &HostBridge->ResAlloc,
- NULL
- );
- FreePool(PrivateData);
- FreePool (HostBridge);
- return EFI_DEVICE_ERROR;
- }
- // PCI Memory Space
- Status = gDS->AddMemorySpace (
- EfiGcdMemoryTypeMemoryMappedIo,
- mResAppeture[Loop1][Loop2] .MemBase,
- mResAppeture[Loop1][Loop2] .MemLimit -mResAppeture[Loop1][Loop2] .MemBase + 1,
- 0
- );
- if (EFI_ERROR (Status)) {
- DEBUG((EFI_D_ERROR,"PCIE AddMemorySpace Error\n"));
- }
- InsertTailList (&HostBridge->Head, &PrivateData->Link);
- }
- }
-
- return EFI_SUCCESS;
-}
-
-EFI_STATUS
-EFIAPI
-NotifyAllocateMemResources(
- IN PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance,
- IN PCI_RESOURCE_TYPE Index,
- IN OUT UINT64 *AllocatedLenMem
-)
-{
- EFI_PHYSICAL_ADDRESS BaseAddress;
- EFI_STATUS ReturnStatus;
- UINT64 AddrLen;
- UINTN BitsOfAlignment;
-
- AddrLen = RootBridgeInstance->ResAllocNode[Index].Length;
- PCIE_DEBUG("Addrlen:%llx\n", AddrLen);
- // Get the number of '1' in Alignment.
- BitsOfAlignment = (UINTN) (HighBitSet64 (RootBridgeInstance->ResAllocNode[Index].Alignment) + 1);
-
- BaseAddress = (RootBridgeInstance->MemBase + *AllocatedLenMem +
- RootBridgeInstance->ResAllocNode[Index].Alignment)
- & ~(RootBridgeInstance->ResAllocNode[Index].Alignment);
- if ((BaseAddress + AddrLen - 1) > RootBridgeInstance->MemLimit) {
- ReturnStatus = EFI_OUT_OF_RESOURCES;
- RootBridgeInstance->ResAllocNode[Index].Length = 0;
- return ReturnStatus;
- }
-
- PCIE_DEBUG("(P)Mem32/64 request memory at:%llx\n", BaseAddress);
- ReturnStatus = gDS->AllocateMemorySpace (
- EfiGcdAllocateAddress,
- EfiGcdMemoryTypeMemoryMappedIo,
- BitsOfAlignment,
- AddrLen,
- &BaseAddress,
- mDriverImageHandle,
- NULL
- );
-
- if (!EFI_ERROR (ReturnStatus)) {
- // We were able to allocate the PCI memory
- RootBridgeInstance->ResAllocNode[Index].Base = (UINTN)BaseAddress;
- RootBridgeInstance->ResAllocNode[Index].Status = ResAllocated;
- *AllocatedLenMem += AddrLen;
- PCIE_DEBUG("(P)Mem32/64 resource allocated:%llx\n", BaseAddress);
-
- } else {
- // Not able to allocate enough PCI memory
- if (ReturnStatus != EFI_OUT_OF_RESOURCES) {
- RootBridgeInstance->ResAllocNode[Index].Length = 0;
- }
- }
- return ReturnStatus;
-}
-
-EFI_STATUS
-EFIAPI
-NotifyAllocateResources(
- IN PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance
-)
-{
- EFI_STATUS ReturnStatus;
- LIST_ENTRY *List;
- PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance;
- PCI_RESOURCE_TYPE Index;
-
- ReturnStatus = EFI_SUCCESS;
- List = HostBridgeInstance->Head.ForwardLink;
-
- while (List != &HostBridgeInstance->Head) {
- RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List);
-
- UINT64 AllocatedLenMem = 0;
- for (Index = TypeIo; Index < TypeBus; Index++) {
- if (RootBridgeInstance->ResAllocNode[Index].Status != ResNone) {
- if(Index == TypeIo) {
- PCIE_DEBUG("NOT SUPPOER IO RESOURCES ON THIS PLATFORM\n");
- } else if ((Index >= TypeMem32) && (Index <= TypePMem64)) {
- ReturnStatus = NotifyAllocateMemResources(RootBridgeInstance,Index,&AllocatedLenMem);
- } else {
- ASSERT (FALSE);
- }
- }
- }
-
- List = List->ForwardLink;
- }
-
- return ReturnStatus;
-}
-
-EFI_STATUS
-EFIAPI
-NotifyFreeResources(
- IN PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance
-)
-{
- EFI_STATUS ReturnStatus;
- LIST_ENTRY *List;
- PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance;
- PCI_RESOURCE_TYPE Index;
- UINT64 AddrLen;
- EFI_PHYSICAL_ADDRESS BaseAddress;
-
- ReturnStatus = EFI_SUCCESS;
- List = HostBridgeInstance->Head.ForwardLink;
- while (List != &HostBridgeInstance->Head) {
- RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List);
- for (Index = TypeIo; Index < TypeBus; Index++) {
- if (RootBridgeInstance->ResAllocNode[Index].Status == ResAllocated) {
- AddrLen = RootBridgeInstance->ResAllocNode[Index].Length;
- BaseAddress = RootBridgeInstance->ResAllocNode[Index].Base;
-
- if(Index <= TypePMem64){
- ReturnStatus = gDS->FreeMemorySpace (BaseAddress, AddrLen);
- }else{
- ASSERT (FALSE);
- }
-
- RootBridgeInstance->ResAllocNode[Index].Type = Index;
- RootBridgeInstance->ResAllocNode[Index].Base = 0;
- RootBridgeInstance->ResAllocNode[Index].Length = 0;
- RootBridgeInstance->ResAllocNode[Index].Status = ResNone;
- }
- }
-
- List = List->ForwardLink;
- }
-
- HostBridgeInstance->ResourceSubmited = FALSE;
- HostBridgeInstance->CanRestarted = TRUE;
- return ReturnStatus;
-
-}
-
-VOID
-EFIAPI
-NotifyBeginEnumeration(
- IN PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance
-)
-{
- LIST_ENTRY *List;
- PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance;
- PCI_RESOURCE_TYPE Index;
-
- //
- // Reset the Each Root Bridge
- //
- List = HostBridgeInstance->Head.ForwardLink;
-
- while (List != &HostBridgeInstance->Head) {
- RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List);
- for (Index = TypeIo; Index < TypeMax; Index++) {
- RootBridgeInstance->ResAllocNode[Index].Type = Index;
- RootBridgeInstance->ResAllocNode[Index].Base = 0;
- RootBridgeInstance->ResAllocNode[Index].Length = 0;
- RootBridgeInstance->ResAllocNode[Index].Status = ResNone;
- }
-
- List = List->ForwardLink;
- }
-
- HostBridgeInstance->ResourceSubmited = FALSE;
- HostBridgeInstance->CanRestarted = TRUE;
-}
-
-/**
- These are the notifications from the PCI bus driver that it is about to enter a certain
- phase of the PCI enumeration process.
-
- This member function can be used to notify the host bridge driver to perform specific actions,
- including any chipset-specific initialization, so that the chipset is ready to enter the next phase.
- Eight notification points are defined at this time. See belows:
- EfiPciHostBridgeBeginEnumeration Resets the host bridge PCI apertures and internal data
- structures. The PCI enumerator should issue this notification
- before starting a fresh enumeration process. Enumeration cannot
- be restarted after sending any other notification such as
- EfiPciHostBridgeBeginBusAllocation.
- EfiPciHostBridgeBeginBusAllocation The bus allocation phase is about to begin. No specific action is
- required here. This notification can be used to perform any
- chipset-specific programming.
- EfiPciHostBridgeEndBusAllocation The bus allocation and bus programming phase is complete. No
- specific action is required here. This notification can be used to
- perform any chipset-specific programming.
- EfiPciHostBridgeBeginResourceAllocation
- The resource allocation phase is about to begin. No specific
- action is required here. This notification can be used to perform
- any chipset-specific programming.
- EfiPciHostBridgeAllocateResources Allocates resources per previously submitted requests for all the PCI
- root bridges. These resource settings are returned on the next call to
- GetProposedResources(). Before calling NotifyPhase() with a Phase of
- EfiPciHostBridgeAllocateResource, the PCI bus enumerator is responsible
- for gathering I/O and memory requests for
- all the PCI root bridges and submitting these requests using
- SubmitResources(). This function pads the resource amount
- to suit the root bridge hardware, takes care of dependencies between
- the PCI root bridges, and calls the Global Coherency Domain (GCD)
- with the allocation request. In the case of padding, the allocated range
- could be bigger than what was requested.
- EfiPciHostBridgeSetResources Programs the host bridge hardware to decode previously allocated
- resources (proposed resources) for all the PCI root bridges. After the
- hardware is programmed, reassigning resources will not be supported.
- The bus settings are not affected.
- EfiPciHostBridgeFreeResources Deallocates resources that were previously allocated for all the PCI
- root bridges and resets the I/O and memory apertures to their initial
- state. The bus settings are not affected. If the request to allocate
- resources fails, the PCI enumerator can use this notification to
- deallocate previous resources, adjust the requests, and retry
- allocation.
- EfiPciHostBridgeEndResourceAllocation The resource allocation phase is completed. No specific action is
- required here. This notification can be used to perform any chipsetspecific
- programming.
-
- @param[in] This The instance pointer of EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
- @param[in] Phase The phase during enumeration
-
- @retval EFI_NOT_READY This phase cannot be entered at this time. For example, this error
- is valid for a Phase of EfiPciHostBridgeAllocateResources if
- SubmitResources() has not been called for one or more
- PCI root bridges before this call
- @retval EFI_DEVICE_ERROR Programming failed due to a hardware error. This error is valid
- for a Phase of EfiPciHostBridgeSetResources.
- @retval EFI_INVALID_PARAMETER Invalid phase parameter
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
- This error is valid for a Phase of EfiPciHostBridgeAllocateResources if the
- previously submitted resource requests cannot be fulfilled or
- were only partially fulfilled.
- @retval EFI_SUCCESS The notification was accepted without any errors.
-
-**/
-EFI_STATUS
-EFIAPI
-NotifyPhase(
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PHASE Phase
- )
-{
- PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance;
- EFI_STATUS ReturnStatus;
-
- HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This);
- ReturnStatus = EFI_SUCCESS;
-
- switch (Phase) {
-
- case EfiPciHostBridgeBeginEnumeration:
- PCIE_DEBUG("Case EfiPciHostBridgeBeginEnumeration\n");
- if (HostBridgeInstance->CanRestarted) {
- NotifyBeginEnumeration(HostBridgeInstance);
- } else {
- //
- // Can not restart
- //
- return EFI_NOT_READY;
- }
- break;
-
- case EfiPciHostBridgeEndEnumeration:
- PCIE_DEBUG("Case EfiPciHostBridgeEndEnumeration\n");
- break;
-
- case EfiPciHostBridgeBeginBusAllocation:
- PCIE_DEBUG("Case EfiPciHostBridgeBeginBusAllocation\n");
- //
- // No specific action is required here, can perform any chipset specific programing
- //
-
- HostBridgeInstance->CanRestarted = FALSE;
- break;
-
- case EfiPciHostBridgeEndBusAllocation:
- PCIE_DEBUG("Case EfiPciHostBridgeEndBusAllocation\n");
- //
- // No specific action is required here, can perform any chipset specific programing
- //
- break;
-
- case EfiPciHostBridgeBeginResourceAllocation:
- PCIE_DEBUG("Case EfiPciHostBridgeBeginResourceAllocation\n");
- //
- // No specific action is required here, can perform any chipset specific programing
- //
- break;
-
- case EfiPciHostBridgeAllocateResources:
- PCIE_DEBUG("Case EfiPciHostBridgeAllocateResources\n");
-
- if (HostBridgeInstance->ResourceSubmited) {
- //
- // Take care of the resource dependencies between the root bridges
- //
- ReturnStatus = NotifyAllocateResources(HostBridgeInstance);
- } else {
- return EFI_NOT_READY;
- }
- //break;
-
- case EfiPciHostBridgeSetResources:
- PCIE_DEBUG("Case EfiPciHostBridgeSetResources\n");
- break;
-
- case EfiPciHostBridgeFreeResources:
- PCIE_DEBUG("Case EfiPciHostBridgeFreeResources\n");
-
- ReturnStatus = NotifyFreeResources(HostBridgeInstance);
- break;
-
- case EfiPciHostBridgeEndResourceAllocation:
- PCIE_DEBUG("Case EfiPciHostBridgeEndResourceAllocation\n");
- HostBridgeInstance->CanRestarted = FALSE;
- break;
-
- default:
- return EFI_INVALID_PARAMETER;
- }
-
- return ReturnStatus;
-}
-
-/**
- Return the device handle of the next PCI root bridge that is associated with this Host Bridge.
-
- This function is called multiple times to retrieve the device handles of all the PCI root bridges that
- are associated with this PCI host bridge. Each PCI host bridge is associated with one or more PCI
- root bridges. On each call, the handle that was returned by the previous call is passed into the
- interface, and on output the interface returns the device handle of the next PCI root bridge. The
- caller can use the handle to obtain the instance of the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL
- for that root bridge. When there are no more PCI root bridges to report, the interface returns
- EFI_NOT_FOUND. A PCI enumerator must enumerate the PCI root bridges in the order that they
- are returned by this function.
- For D945 implementation, there is only one root bridge in PCI host bridge.
-
- @param[in] This The instance pointer of EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
- @param[in, out] RootBridgeHandle Returns the device handle of the next PCI root bridge.
-
- @retval EFI_SUCCESS If parameter RootBridgeHandle = NULL, then return the first Rootbridge handle of the
- specific Host bridge and return EFI_SUCCESS.
- @retval EFI_NOT_FOUND Can not find the any more root bridge in specific host bridge.
- @retval EFI_INVALID_PARAMETER RootBridgeHandle is not an EFI_HANDLE that was
- returned on a previous call to GetNextRootBridge().
-**/
-EFI_STATUS
-EFIAPI
-GetNextRootBridge(
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
- IN OUT EFI_HANDLE *RootBridgeHandle
- )
-{
- BOOLEAN NoRootBridge;
- LIST_ENTRY *List;
- PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance;
- PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance;
-
- NoRootBridge = TRUE;
- HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This);
- List = HostBridgeInstance->Head.ForwardLink;
-
-
- while (List != &HostBridgeInstance->Head) {
- NoRootBridge = FALSE;
- RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List);
- if (*RootBridgeHandle == NULL) {
- //
- // Return the first Root Bridge Handle of the Host Bridge
- //
- *RootBridgeHandle = RootBridgeInstance->Handle;
- return EFI_SUCCESS;
- } else {
- if (*RootBridgeHandle == RootBridgeInstance->Handle) {
- //
- // Get next if have
- //
- List = List->ForwardLink;
- if (List!=&HostBridgeInstance->Head) {
- RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List);
- *RootBridgeHandle = RootBridgeInstance->Handle;
- return EFI_SUCCESS;
- } else {
- return EFI_NOT_FOUND;
- }
- }
- }
-
- List = List->ForwardLink;
- } //end while
-
- if (NoRootBridge) {
- return EFI_NOT_FOUND;
- } else {
- return EFI_INVALID_PARAMETER;
- }
-}
-
-/**
- Returns the allocation attributes of a PCI root bridge.
-
- The function returns the allocation attributes of a specific PCI root bridge. The attributes can vary
- from one PCI root bridge to another. These attributes are different from the decode-related
- attributes that are returned by the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.GetAttributes() member function. The
- RootBridgeHandle parameter is used to specify the instance of the PCI root bridge. The device
- handles of all the root bridges that are associated with this host bridge must be obtained by calling
- GetNextRootBridge(). The attributes are static in the sense that they do not change during or
- after the enumeration process. The hardware may provide mechanisms to change the attributes on
- the fly, but such changes must be completed before EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL is
- installed. The permitted values of EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ATTRIBUTES are defined in
- "Related Definitions" below. The caller uses these attributes to combine multiple resource requests.
- For example, if the flag EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM is set, the PCI bus enumerator needs to
- include requests for the prefetchable memory in the nonprefetchable memory pool and not request any
- prefetchable memory.
- Attribute Description
- ------------------------------------ ----------------------------------------------------------------------
- EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM If this bit is set, then the PCI root bridge does not support separate
- windows for nonprefetchable and prefetchable memory. A PCI bus
- driver needs to include requests for prefetchable memory in the
- nonprefetchable memory pool.
-
- EFI_PCI_HOST_BRIDGE_MEM64_DECODE If this bit is set, then the PCI root bridge supports 64-bit memory
- windows. If this bit is not set, the PCI bus driver needs to include
- requests for a 64-bit memory address in the corresponding 32-bit
- memory pool.
-
- @param[in] This The instance pointer of EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
- @param[in] RootBridgeHandle The device handle of the PCI root bridge in which the caller is interested. Type
- EFI_HANDLE is defined in InstallProtocolInterface() in the UEFI 2.0 Specification.
- @param[out] Attributes The pointer to attribte of root bridge, it is output parameter
-
- @retval EFI_INVALID_PARAMETER Attribute pointer is NULL
- @retval EFI_INVALID_PARAMETER RootBridgehandle is invalid.
- @retval EFI_SUCCESS Success to get attribute of interested root bridge.
-
-**/
-EFI_STATUS
-EFIAPI
-GetAttributes(
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
- IN EFI_HANDLE RootBridgeHandle,
- OUT UINT64 *Attributes
- )
-{
- LIST_ENTRY *List;
- PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance;
- PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance;
-
- if (Attributes == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This);
- List = HostBridgeInstance->Head.ForwardLink;
-
- while (List != &HostBridgeInstance->Head) {
- RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List);
- if (RootBridgeHandle == RootBridgeInstance->Handle) {
- *Attributes = RootBridgeInstance->RootBridgeAttrib;
- return EFI_SUCCESS;
- }
-
- List = List->ForwardLink;
- }
-
- //
- // RootBridgeHandle is not an EFI_HANDLE
- // that was returned on a previous call to GetNextRootBridge()
- //
- return EFI_INVALID_PARAMETER;
-}
-
-/**
- Sets up the specified PCI root bridge for the bus enumeration process.
-
- This member function sets up the root bridge for bus enumeration and returns the PCI bus range
- over which the search should be performed in ACPI 2.0 resource descriptor format.
-
- @param[in] This The EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ PROTOCOL instance.
- @param[in] RootBridgeHandle The PCI Root Bridge to be set up.
- @param[out] Configuration Pointer to the pointer to the PCI bus resource descriptor.
-
- @retval EFI_INVALID_PARAMETER Invalid Root bridge's handle
- @retval EFI_OUT_OF_RESOURCES Fail to allocate ACPI resource descriptor tag.
- @retval EFI_SUCCESS Sucess to allocate ACPI resource descriptor.
-
-**/
-EFI_STATUS
-EFIAPI
-StartBusEnumeration(
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
- IN EFI_HANDLE RootBridgeHandle,
- OUT VOID **Configuration
- )
-{
- LIST_ENTRY *List;
- PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance;
- PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance;
- VOID *Buffer;
- UINT8 *Temp;
- UINT64 BusStart;
- UINT64 BusEnd;
-
- HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This);
- List = HostBridgeInstance->Head.ForwardLink;
-
- while (List != &HostBridgeInstance->Head) {
- RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List);
- if (RootBridgeHandle == RootBridgeInstance->Handle) {
- //
- // Set up the Root Bridge for Bus Enumeration
- //
- BusStart = RootBridgeInstance->BusBase;
- BusEnd = RootBridgeInstance->BusLimit;
- //
- // Program the Hardware(if needed) if error return EFI_DEVICE_ERROR
- //
-
- Buffer = AllocatePool (sizeof(EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) + sizeof(EFI_ACPI_END_TAG_DESCRIPTOR));
- if (Buffer == NULL) {
- return EFI_OUT_OF_RESOURCES;
- }
-
- Temp = (UINT8 *)Buffer;
-
- ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->Desc = 0x8A;
- ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->Len = 0x2B;
- ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->ResType = 2;
- ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->GenFlag = 0;
- ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->SpecificFlag = 0;
- ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->AddrSpaceGranularity = 0;
- ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->AddrRangeMin = BusStart;
- ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->AddrRangeMax = 0;
- ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->AddrTranslationOffset = 0;
- ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->AddrLen = BusEnd - BusStart + 1;
-
- Temp = Temp + sizeof(EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR);
- ((EFI_ACPI_END_TAG_DESCRIPTOR *)Temp)->Desc = 0x79;
- ((EFI_ACPI_END_TAG_DESCRIPTOR *)Temp)->Checksum = 0x0;
-
- *Configuration = Buffer;
- return EFI_SUCCESS;
- }
- List = List->ForwardLink;
- }
-
- return EFI_INVALID_PARAMETER;
-}
-
-/**
- Programs the PCI root bridge hardware so that it decodes the specified PCI bus range.
-
- This member function programs the specified PCI root bridge to decode the bus range that is
- specified by the input parameter Configuration.
- The bus range information is specified in terms of the ACPI 2.0 resource descriptor format.
-
- @param[in] This The EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ PROTOCOL instance
- @param[in] RootBridgeHandle The PCI Root Bridge whose bus range is to be programmed
- @param[in] Configuration The pointer to the PCI bus resource descriptor
-
- @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge handle.
- @retval EFI_INVALID_PARAMETER Configuration is NULL.
- @retval EFI_INVALID_PARAMETER Configuration does not point to a valid ACPI 2.0 resource descriptor.
- @retval EFI_INVALID_PARAMETER Configuration does not include a valid ACPI 2.0 bus resource descriptor.
- @retval EFI_INVALID_PARAMETER Configuration includes valid ACPI 2.0 resource descriptors other than
- bus descriptors.
- @retval EFI_INVALID_PARAMETER Configuration contains one or more invalid ACPI resource descriptors.
- @retval EFI_INVALID_PARAMETER "Address Range Minimum" is invalid for this root bridge.
- @retval EFI_INVALID_PARAMETER "Address Range Length" is invalid for this root bridge.
- @retval EFI_DEVICE_ERROR Programming failed due to a hardware error.
- @retval EFI_SUCCESS The bus range for the PCI root bridge was programmed.
-
-**/
-EFI_STATUS
-EFIAPI
-SetBusNumbers(
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
- IN EFI_HANDLE RootBridgeHandle,
- IN VOID *Configuration
- )
-{
- LIST_ENTRY *List;
- PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance;
- PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance;
- UINT8 *Ptr;
- UINTN BusStart;
- UINTN BusEnd;
- UINTN BusLen;
-
- if (Configuration == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- Ptr = Configuration;
-
- //
- // Check the Configuration is valid
- //
- if(*Ptr != ACPI_ADDRESS_SPACE_DESCRIPTOR) {
- return EFI_INVALID_PARAMETER;
- }
-
- if (((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Ptr)->ResType != 2) {
- return EFI_INVALID_PARAMETER;
- }
-
- Ptr += sizeof(EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR);
- if (*Ptr != ACPI_END_TAG_DESCRIPTOR) {
- return EFI_INVALID_PARAMETER;
- }
-
- HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This);
- List = HostBridgeInstance->Head.ForwardLink;
-
- Ptr = Configuration;
-
- while (List != &HostBridgeInstance->Head) {
- RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List);
- if (RootBridgeHandle == RootBridgeInstance->Handle) {
- BusStart = (UINTN)((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Ptr)->AddrRangeMin;
- BusLen = (UINTN)((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Ptr)->AddrLen;
- BusEnd = BusStart + BusLen - 1;
-
- if (BusStart > BusEnd) {
- return EFI_INVALID_PARAMETER;
- }
-
- if ((BusStart < RootBridgeInstance->BusBase) || (BusEnd > RootBridgeInstance->BusLimit)) {
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // Update the Bus Range
- //
- RootBridgeInstance->ResAllocNode[TypeBus].Base = BusStart;
- RootBridgeInstance->ResAllocNode[TypeBus].Length = BusLen;
- RootBridgeInstance->ResAllocNode[TypeBus].Status = ResAllocated;
-
- //
- // Program the Root Bridge Hardware
- //
-
- return EFI_SUCCESS;
- }
-
- List = List->ForwardLink;
- }
-
- return EFI_INVALID_PARAMETER;
-}
-
-VOID
-EFIAPI
-SubmitGetResourceType(
- IN EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Ptr,
- OUT UINT64* Index
-)
-{
- switch (Ptr->ResType) {
- case 0:
- if (Ptr->AddrSpaceGranularity == 32) {
- if (Ptr->SpecificFlag == 0x06)
- *Index = TypePMem32;
- else
- *Index = TypeMem32;
- }
-
- if (Ptr->AddrSpaceGranularity == 64) {
- if (Ptr->SpecificFlag == 0x06)
- *Index = TypePMem64;
- else
- *Index = TypeMem64;
- }
- break;
-
- case 1:
- *Index = TypeIo;
- break;
-
- default:
- break;
- };
-
-}
-
-/**
- Submits the I/O and memory resource requirements for the specified PCI root bridge.
-
- This function is used to submit all the I/O and memory resources that are required by the specified
- PCI root bridge. The input parameter Configuration is used to specify the following:
- - The various types of resources that are required
- - The associated lengths in terms of ACPI 2.0 resource descriptor format
-
- @param[in] This Pointer to the EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL instance.
- @param[in] RootBridgeHandle The PCI root bridge whose I/O and memory resource requirements are being submitted.
- @param[in] Configuration The pointer to the PCI I/O and PCI memory resource descriptor.
-
- @retval EFI_SUCCESS The I/O and memory resource requests for a PCI root bridge were accepted.
- @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge handle.
- @retval EFI_INVALID_PARAMETER Configuration is NULL.
- @retval EFI_INVALID_PARAMETER Configuration does not point to a valid ACPI 2.0 resource descriptor.
- @retval EFI_INVALID_PARAMETER Configuration includes requests for one or more resource types that are
- not supported by this PCI root bridge. This error will happen if the caller
- did not combine resources according to Attributes that were returned by
- GetAllocAttributes().
- @retval EFI_INVALID_PARAMETER Address Range Maximum" is invalid.
- @retval EFI_INVALID_PARAMETER "Address Range Length" is invalid for this PCI root bridge.
- @retval EFI_INVALID_PARAMETER "Address Space Granularity" is invalid for this PCI root bridge.
-
-**/
-EFI_STATUS
-EFIAPI
-SubmitResources(
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
- IN EFI_HANDLE RootBridgeHandle,
- IN VOID *Configuration
- )
-{
- LIST_ENTRY *List;
- PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance;
- PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance;
- UINT8 *Temp;
- EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Ptr;
- UINT64 AddrLen;
- UINT64 Alignment;
- UINTN Index;
-
- PCIE_DEBUG("In SubmitResources\n");
- //
- // Check the input parameter: Configuration
- //
- if (Configuration == NULL)
- return EFI_INVALID_PARAMETER;
-
- HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This);
- List = HostBridgeInstance->Head.ForwardLink;
-
- Temp = (UINT8 *)Configuration;
- while ( *Temp == 0x8A)
- Temp += sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) ;
-
- if (*Temp != 0x79)
- return EFI_INVALID_PARAMETER;
-
- Temp = (UINT8 *)Configuration;
- while (List != &HostBridgeInstance->Head) {
- RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List);
- if (RootBridgeHandle == RootBridgeInstance->Handle) {
- while ( *Temp == 0x8A) {
- Ptr = (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *) Temp ;
- PCIE_DEBUG("Ptr->ResType:%d\n", Ptr->ResType);
- PCIE_DEBUG("Ptr->Addrlen:%llx\n", Ptr->AddrLen);
- PCIE_DEBUG("Ptr->AddrRangeMax:%llx\n", Ptr->AddrRangeMax);
- PCIE_DEBUG("Ptr->AddrRangeMin:%llx\n", Ptr->AddrRangeMin);
- PCIE_DEBUG("Ptr->SpecificFlag:%llx\n", Ptr->SpecificFlag);
- PCIE_DEBUG("Ptr->AddrSpaceGranularity:%d\n", Ptr->AddrSpaceGranularity);
- PCIE_DEBUG("RootBridgeInstance->RootBridgeAttrib:%llx\n", RootBridgeInstance->RootBridgeAttrib);
- //
- // Check address range alignment
- //
- if (Ptr->AddrRangeMax != (GetPowerOfTwo64 (Ptr->AddrRangeMax + 1) - 1)) {
- return EFI_INVALID_PARAMETER;
- }
- Index = 0;
- SubmitGetResourceType(Ptr,&Index);
- AddrLen = (UINTN) Ptr->AddrLen;
- Alignment = (UINTN) Ptr->AddrRangeMax;
- RootBridgeInstance->ResAllocNode[Index].Length = AddrLen;
- RootBridgeInstance->ResAllocNode[Index].Alignment = Alignment;
- RootBridgeInstance->ResAllocNode[Index].Status = ResRequested;
- HostBridgeInstance->ResourceSubmited = TRUE;
-
- Temp += sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) ;
- }
-
- return EFI_SUCCESS;
- }
-
- List = List->ForwardLink;
- }
- return EFI_INVALID_PARAMETER;
-}
-
-/**
- Returns the proposed resource settings for the specified PCI root bridge.
-
- This member function returns the proposed resource settings for the specified PCI root bridge. The
- proposed resource settings are prepared when NotifyPhase() is called with a Phase of
- EfiPciHostBridgeAllocateResources. The output parameter Configuration
- specifies the following:
- - The various types of resources, excluding bus resources, that are allocated
- - The associated lengths in terms of ACPI 2.0 resource descriptor format
-
- @param[in] This Pointer to the EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL instance.
- @param[in] RootBridgeHandle The PCI root bridge handle. Type EFI_HANDLE is defined in InstallProtocolInterface() in the UEFI 2.0 Specification.
- @param[out] Configuration The pointer to the pointer to the PCI I/O and memory resource descriptor.
-
- @retval EFI_SUCCESS The requested parameters were returned.
- @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge handle.
- @retval EFI_DEVICE_ERROR Programming failed due to a hardware error.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-SetResource(
- PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance,
- VOID *Buffer
-
-)
-{
- UINTN Index;
- UINT8 *Temp;
- EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Ptr;
- UINT64 ResStatus;
-
- Temp = Buffer;
-
- for (Index = 0; Index < TypeBus; Index ++)
- {
- if (RootBridgeInstance->ResAllocNode[Index].Status != ResNone) {
- Ptr = (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *) Temp ;
- ResStatus = RootBridgeInstance->ResAllocNode[Index].Status;
-
- switch (Index) {
-
- case TypeIo:
- //
- // Io
- //
- Ptr->Desc = 0x8A;
- Ptr->Len = 0x2B;
- Ptr->ResType = 1;
- Ptr->GenFlag = 0;
- Ptr->SpecificFlag = 0;
- /* PCIE Device Iobar address should be based on IoBase */
- Ptr->AddrRangeMin = RootBridgeInstance->IoBase;
- Ptr->AddrRangeMax = 0;
- Ptr->AddrTranslationOffset = \
- (ResStatus == ResAllocated) ? EFI_RESOURCE_SATISFIED : EFI_RESOURCE_LESS;
- Ptr->AddrLen = RootBridgeInstance->ResAllocNode[Index].Length;
- break;
-
- case TypeMem32:
- //
- // Memory 32
- //
- Ptr->Desc = 0x8A;
- Ptr->Len = 0x2B;
- Ptr->ResType = 0;
- Ptr->GenFlag = 0;
- Ptr->SpecificFlag = 0;
- Ptr->AddrSpaceGranularity = 32;
- /* PCIE device Bar should be based on PciRegionBase */
- if (RootBridgeInstance->PciRegionBase > MAX_UINT32) {
- DEBUG((DEBUG_ERROR, "PCIE Res(TypeMem32) unsupported.\n"));
- return EFI_UNSUPPORTED;
- }
- Ptr->AddrRangeMin = RootBridgeInstance->ResAllocNode[Index].Base - RootBridgeInstance->MemBase +
- RootBridgeInstance->PciRegionBase;
- Ptr->AddrRangeMax = 0;
- Ptr->AddrTranslationOffset = \
- (ResStatus == ResAllocated) ? EFI_RESOURCE_SATISFIED : EFI_RESOURCE_LESS;
- Ptr->AddrLen = RootBridgeInstance->ResAllocNode[Index].Length;
- break;
-
- case TypePMem32:
- //
- // Prefetch memory 32
- //
- Ptr->Desc = 0x8A;
- Ptr->Len = 0x2B;
- Ptr->ResType = 0;
- Ptr->GenFlag = 0;
- Ptr->SpecificFlag = 6;
- Ptr->AddrSpaceGranularity = 32;
- /* PCIE device Bar should be based on PciRegionBase */
- if (RootBridgeInstance->PciRegionBase > MAX_UINT32) {
- DEBUG((DEBUG_ERROR, "PCIE Res(TypePMem32) unsupported.\n"));
- return EFI_UNSUPPORTED;
- }
- Ptr->AddrRangeMin = RootBridgeInstance->ResAllocNode[Index].Base - RootBridgeInstance->MemBase +
- RootBridgeInstance->PciRegionBase;
- Ptr->AddrRangeMax = 0;
- Ptr->AddrTranslationOffset = \
- (ResStatus == ResAllocated) ? EFI_RESOURCE_SATISFIED : EFI_RESOURCE_LESS;
- Ptr->AddrLen = RootBridgeInstance->ResAllocNode[Index].Length;
- break;
-
- case TypeMem64:
- //
- // Memory 64
- //
- Ptr->Desc = 0x8A;
- Ptr->Len = 0x2B;
- Ptr->ResType = 0;
- Ptr->GenFlag = 0;
- Ptr->SpecificFlag = 0;
- Ptr->AddrSpaceGranularity = 64;
- /* PCIE device Bar should be based on PciRegionBase */
- Ptr->AddrRangeMin = RootBridgeInstance->ResAllocNode[Index].Base - RootBridgeInstance->MemBase +
- RootBridgeInstance->PciRegionBase;
- Ptr->AddrRangeMax = 0;
- Ptr->AddrTranslationOffset = \
- (ResStatus == ResAllocated) ? EFI_RESOURCE_SATISFIED : EFI_RESOURCE_LESS;
- Ptr->AddrLen = RootBridgeInstance->ResAllocNode[Index].Length;
- break;
-
- case TypePMem64:
- //
- // Prefetch memory 64
- //
- Ptr->Desc = 0x8A;
- Ptr->Len = 0x2B;
- Ptr->ResType = 0;
- Ptr->GenFlag = 0;
- Ptr->SpecificFlag = 6;
- Ptr->AddrSpaceGranularity = 64;
- /* PCIE device Bar should be based on PciRegionBase */
- Ptr->AddrRangeMin = RootBridgeInstance->ResAllocNode[Index].Base - RootBridgeInstance->MemBase +
- RootBridgeInstance->PciRegionBase;
- Ptr->AddrRangeMax = 0;
- Ptr->AddrTranslationOffset = \
- (ResStatus == ResAllocated) ? EFI_RESOURCE_SATISFIED : EFI_RESOURCE_LESS;
- Ptr->AddrLen = RootBridgeInstance->ResAllocNode[Index].Length;
- break;
- };
- PCIE_DEBUG("Ptr->ResType:%d\n", Ptr->ResType);
- PCIE_DEBUG("Ptr->Addrlen:%llx\n", Ptr->AddrLen);
- PCIE_DEBUG("Ptr->AddrRangeMax:%llx\n", Ptr->AddrRangeMax);
- PCIE_DEBUG("Ptr->AddrRangeMin:%llx\n", Ptr->AddrRangeMin);
- PCIE_DEBUG("Ptr->SpecificFlag:%llx\n", Ptr->SpecificFlag);
- PCIE_DEBUG("Ptr->AddrTranslationOffset:%d\n", Ptr->AddrTranslationOffset);
- PCIE_DEBUG("Ptr->AddrSpaceGranularity:%d\n", Ptr->AddrSpaceGranularity);
-
- Temp += sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR);
- }
- }
- ((EFI_ACPI_END_TAG_DESCRIPTOR *)Temp)->Desc = 0x79;
- ((EFI_ACPI_END_TAG_DESCRIPTOR *)Temp)->Checksum = 0x0;
-
- return EFI_SUCCESS;
-}
-/**
- Returns the proposed resource settings for the specified PCI root bridge.
-
- This member function returns the proposed resource settings for the specified PCI root bridge. The
- proposed resource settings are prepared when NotifyPhase() is called with a Phase of
- EfiPciHostBridgeAllocateResources. The output parameter Configuration
- specifies the following:
- - The various types of resources, excluding bus resources, that are allocated
- - The associated lengths in terms of ACPI 2.0 resource descriptor format
-
- @param[in] This Pointer to the EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL instance.
- @param[in] RootBridgeHandle The PCI root bridge handle. Type EFI_HANDLE is defined in InstallProtocolInterface() in the UEFI 2.0 Specification.
- @param[out] Configuration The pointer to the pointer to the PCI I/O and memory resource descriptor.
-
- @retval EFI_SUCCESS The requested parameters were returned.
- @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge handle.
- @retval EFI_DEVICE_ERROR Programming failed due to a hardware error.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-GetProposedResources(
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
- IN EFI_HANDLE RootBridgeHandle,
- OUT VOID **Configuration
- )
-{
- LIST_ENTRY *List;
- PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance;
- PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance;
- UINTN Index;
- UINTN Number;
- VOID *Buffer;
-
- Buffer = NULL;
- Number = 0;
-
- PCIE_DEBUG("In GetProposedResources\n");
- //
- // Get the Host Bridge Instance from the resource allocation protocol
- //
- HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This);
- List = HostBridgeInstance->Head.ForwardLink;
-
- //
- // Enumerate the root bridges in this host bridge
- //
- while (List != &HostBridgeInstance->Head) {
- RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List);
- if (RootBridgeHandle == RootBridgeInstance->Handle) {
- for (Index = 0; Index < TypeBus; Index ++) {
- if (RootBridgeInstance->ResAllocNode[Index].Status != ResNone) {
- Number ++;
- }
- }
-
- Buffer = AllocateZeroPool (Number * sizeof(EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) + sizeof(EFI_ACPI_END_TAG_DESCRIPTOR));
- if (Buffer == NULL) {
- return EFI_OUT_OF_RESOURCES;
- }
-
- (VOID)SetResource(RootBridgeInstance,Buffer);
-
- *Configuration = Buffer;
-
- return EFI_SUCCESS;
- }
-
- List = List->ForwardLink;
- }
-
- return EFI_INVALID_PARAMETER;
-}
-
-/**
- Provides the hooks from the PCI bus driver to every PCI controller (device/function) at various
- stages of the PCI enumeration process that allow the host bridge driver to preinitialize individual
- PCI controllers before enumeration.
-
- This function is called during the PCI enumeration process. No specific action is expected from this
- member function. It allows the host bridge driver to preinitialize individual PCI controllers before
- enumeration.
-
- @param This Pointer to the EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL instance.
- @param RootBridgeHandle The associated PCI root bridge handle. Type EFI_HANDLE is defined in
- InstallProtocolInterface() in the UEFI 2.0 Specification.
- @param PciAddress The address of the PCI device on the PCI bus. This address can be passed to the
- EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL member functions to access the PCI
- configuration space of the device. See Table 12-1 in the UEFI 2.0 Specification for
- the definition of EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS.
- @param Phase The phase of the PCI device enumeration.
-
- @retval EFI_SUCCESS The requested parameters were returned.
- @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge handle.
- @retval EFI_INVALID_PARAMETER Phase is not a valid phase that is defined in
- EFI_PCI_CONTROLLER_RESOURCE_ALLOCATION_PHASE.
- @retval EFI_DEVICE_ERROR Programming failed due to a hardware error. The PCI enumerator should
- not enumerate this device, including its child devices if it is a PCI-to-PCI
- bridge.
-
-**/
-EFI_STATUS
-EFIAPI
-PreprocessController (
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
- IN EFI_HANDLE RootBridgeHandle,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS PciAddress,
- IN EFI_PCI_CONTROLLER_RESOURCE_ALLOCATION_PHASE Phase
- )
-{
- PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance;
- PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance;
- LIST_ENTRY *List;
-
- HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This);
- List = HostBridgeInstance->Head.ForwardLink;
-
- //
- // Enumerate the root bridges in this host bridge
- //
- while (List != &HostBridgeInstance->Head) {
- RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List);
- if (RootBridgeHandle == RootBridgeInstance->Handle) {
- break;
- }
- List = List->ForwardLink;
- }
- if (List == &HostBridgeInstance->Head) {
- return EFI_INVALID_PARAMETER;
- }
-
- if ((UINT32)Phase > EfiPciBeforeResourceCollection) {
- return EFI_INVALID_PARAMETER;
- }
-
- return EFI_SUCCESS;
-}
deleted file mode 100644
@@ -1,2220 +0,0 @@
-/**
- * Copyright (c) 2014, AppliedMicro Corp. All rights reserved.
- * Copyright (c) 2016, Hisilicon Limited. All rights reserved.
- * Copyright (c) 2016, Linaro Limited. All rights reserved.
- *
- * This program and the accompanying materials
- * are licensed and made available under the terms and conditions of the BSD License
- * which accompanies this distribution. The full text of the license may be found at
- * http://opensource.org/licenses/bsd-license.php
- *
- * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
- *
- **/
-
-#include "PciHostBridge.h"
-#include <IndustryStandard/PciExpress30.h>
-#include <Library/DevicePathLib.h>
-#include <Library/DmaLib.h>
-#include <Library/PciExpressLib.h>
-#include <Regs/HisiPcieV1RegOffset.h>
-
-
-typedef struct {
- EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR SpaceDesp[TypeMax];
- EFI_ACPI_END_TAG_DESCRIPTOR EndDesp;
-} RESOURCE_CONFIGURATION;
-
-RESOURCE_CONFIGURATION Configuration = {
- {{0x8A, 0x2B, 1, 0, 0, 0, 0, 0, 0, 0},
- {0x8A, 0x2B, 0, 0, 0, 32, 0, 0, 0, 0},
- {0x8A, 0x2B, 0, 0, 6, 32, 0, 0, 0, 0},
- {0x8A, 0x2B, 0, 0, 0, 64, 0, 0, 0, 0},
- {0x8A, 0x2B, 0, 0, 6, 64, 0, 0, 0, 0},
- {0x8A, 0x2B, 2, 0, 0, 0, 0, 0, 0, 0}},
- {0x79, 0}
-};
-
-//
-// Protocol Member Function Prototypes
-//
-
-/**
- Polls an address in memory mapped I/O space until an exit condition is met, or
- a timeout occurs.
-
- This function provides a standard way to poll a PCI memory location. A PCI memory read
- operation is performed at the PCI memory address specified by Address for the width specified
- by Width. The result of this PCI memory read operation is stored in Result. This PCI memory
- read operation is repeated until either a timeout of Delay 100 ns units has expired, or (Result &
- Mask) is equal to Value.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Width Signifies the width of the memory operations.
- @param[in] Address The base address of the memory operations. The caller is
- responsible for aligning Address if required.
- @param[in] Mask Mask used for the polling criteria. Bytes above Width in Mask
- are ignored. The bits in the bytes below Width which are zero in
- Mask are ignored when polling the memory address.
- @param[in] Value The comparison value used for the polling exit criteria.
- @param[in] Delay The number of 100 ns units to poll. Note that timer available may
- be of poorer granularity.
- @param[out] Result Pointer to the last value read from the memory location.
-
- @retval EFI_SUCCESS The last data returned from the access matched the poll exit criteria.
- @retval EFI_INVALID_PARAMETER Width is invalid.
- @retval EFI_INVALID_PARAMETER Result is NULL.
- @retval EFI_TIMEOUT Delay expired before a match occurred.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoPollMem (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 Address,
- IN UINT64 Mask,
- IN UINT64 Value,
- IN UINT64 Delay,
- OUT UINT64 *Result
- );
-
-/**
- Reads from the I/O space of a PCI Root Bridge. Returns when either the polling exit criteria is
- satisfied or after a defined duration.
-
- This function provides a standard way to poll a PCI I/O location. A PCI I/O read operation is
- performed at the PCI I/O address specified by Address for the width specified by Width.
- The result of this PCI I/O read operation is stored in Result. This PCI I/O read operation is
- repeated until either a timeout of Delay 100 ns units has expired, or (Result & Mask) is equal
- to Value.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Width Signifies the width of the I/O operations.
- @param[in] Address The base address of the I/O operations. The caller is responsible
- for aligning Address if required.
- @param[in] Mask Mask used for the polling criteria. Bytes above Width in Mask
- are ignored. The bits in the bytes below Width which are zero in
- Mask are ignored when polling the I/O address.
- @param[in] Value The comparison value used for the polling exit criteria.
- @param[in] Delay The number of 100 ns units to poll. Note that timer available may
- be of poorer granularity.
- @param[out] Result Pointer to the last value read from the memory location.
-
- @retval EFI_SUCCESS The last data returned from the access matched the poll exit criteria.
- @retval EFI_INVALID_PARAMETER Width is invalid.
- @retval EFI_INVALID_PARAMETER Result is NULL.
- @retval EFI_TIMEOUT Delay expired before a match occurred.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoPollIo (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 Address,
- IN UINT64 Mask,
- IN UINT64 Value,
- IN UINT64 Delay,
- OUT UINT64 *Result
- );
-
-/**
- Enables a PCI driver to access PCI controller registers in the PCI root bridge memory space.
-
- The Mem.Read(), and Mem.Write() functions enable a driver to access PCI controller
- registers in the PCI root bridge memory space.
- The memory operations are carried out exactly as requested. The caller is responsible for satisfying
- any alignment and memory width restrictions that a PCI Root Bridge on a platform might require.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Width Signifies the width of the memory operation.
- @param[in] Address The base address of the memory operation. The caller is
- responsible for aligning the Address if required.
- @param[in] Count The number of memory operations to perform. Bytes moved is
- Width size * Count, starting at Address.
- @param[out] Buffer For read operations, the destination buffer to store the results. For
- write operations, the source buffer to write data from.
-
- @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
- @retval EFI_INVALID_PARAMETER Buffer is NULL.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoMemRead (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 Address,
- IN UINTN Count,
- OUT VOID *Buffer
- );
-
-/**
- Enables a PCI driver to access PCI controller registers in the PCI root bridge memory space.
-
- The Mem.Read(), and Mem.Write() functions enable a driver to access PCI controller
- registers in the PCI root bridge memory space.
- The memory operations are carried out exactly as requested. The caller is responsible for satisfying
- any alignment and memory width restrictions that a PCI Root Bridge on a platform might require.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Width Signifies the width of the memory operation.
- @param[in] Address The base address of the memory operation. The caller is
- responsible for aligning the Address if required.
- @param[in] Count The number of memory operations to perform. Bytes moved is
- Width size * Count, starting at Address.
- @param[in] Buffer For read operations, the destination buffer to store the results. For
- write operations, the source buffer to write data from.
-
- @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
- @retval EFI_INVALID_PARAMETER Buffer is NULL.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoMemWrite (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 Address,
- IN UINTN Count,
- IN VOID *Buffer
- );
-
-/**
- Enables a PCI driver to access PCI controller registers in the PCI root bridge I/O space.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Width Signifies the width of the memory operations.
- @param[in] UserAddress The base address of the I/O operation. The caller is responsible for
- aligning the Address if required.
- @param[in] Count The number of I/O operations to perform. Bytes moved is Width
- size * Count, starting at Address.
- @param[out] UserBuffer For read operations, the destination buffer to store the results. For
- write operations, the source buffer to write data from.
-
- @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
- @retval EFI_INVALID_PARAMETER Buffer is NULL.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoIoRead (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 UserAddress,
- IN UINTN Count,
- OUT VOID *UserBuffer
- );
-
-/**
- Enables a PCI driver to access PCI controller registers in the PCI root bridge I/O space.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Width Signifies the width of the memory operations.
- @param[in] UserAddress The base address of the I/O operation. The caller is responsible for
- aligning the Address if required.
- @param[in] Count The number of I/O operations to perform. Bytes moved is Width
- size * Count, starting at Address.
- @param[in] UserBuffer For read operations, the destination buffer to store the results. For
- write operations, the source buffer to write data from.
-
- @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
- @retval EFI_INVALID_PARAMETER Buffer is NULL.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoIoWrite (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 UserAddress,
- IN UINTN Count,
- IN VOID *UserBuffer
- );
-
-/**
- Enables a PCI driver to copy one region of PCI root bridge memory space to another region of PCI
- root bridge memory space.
-
- The CopyMem() function enables a PCI driver to copy one region of PCI root bridge memory
- space to another region of PCI root bridge memory space. This is especially useful for video scroll
- operation on a memory mapped video buffer.
- The memory operations are carried out exactly as requested. The caller is responsible for satisfying
- any alignment and memory width restrictions that a PCI root bridge on a platform might require.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL instance.
- @param[in] Width Signifies the width of the memory operations.
- @param[in] DestAddress The destination address of the memory operation. The caller is
- responsible for aligning the DestAddress if required.
- @param[in] SrcAddress The source address of the memory operation. The caller is
- responsible for aligning the SrcAddress if required.
- @param[in] Count The number of memory operations to perform. Bytes moved is
- Width size * Count, starting at DestAddress and SrcAddress.
-
- @retval EFI_SUCCESS The data was copied from one memory region to another memory region.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoCopyMem (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 DestAddress,
- IN UINT64 SrcAddress,
- IN UINTN Count
- );
-
-/**
- Enables a PCI driver to access PCI controller registers in a PCI root bridge's configuration space.
-
- The Pci.Read() and Pci.Write() functions enable a driver to access PCI configuration
- registers for a PCI controller.
- The PCI Configuration operations are carried out exactly as requested. The caller is responsible for
- any alignment and PCI configuration width issues that a PCI Root Bridge on a platform might
- require.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Width Signifies the width of the memory operations.
- @param[in] Address The address within the PCI configuration space for the PCI controller.
- @param[in] Count The number of PCI configuration operations to perform. Bytes
- moved is Width size * Count, starting at Address.
- @param[out] Buffer For read operations, the destination buffer to store the results. For
- write operations, the source buffer to write data from.
-
- @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
- @retval EFI_INVALID_PARAMETER Buffer is NULL.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoPciRead (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 Address,
- IN UINTN Count,
- OUT VOID *Buffer
- );
-
-/**
- Enables a PCI driver to access PCI controller registers in a PCI root bridge's configuration space.
-
- The Pci.Read() and Pci.Write() functions enable a driver to access PCI configuration
- registers for a PCI controller.
- The PCI Configuration operations are carried out exactly as requested. The caller is responsible for
- any alignment and PCI configuration width issues that a PCI Root Bridge on a platform might
- require.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Width Signifies the width of the memory operations.
- @param[in] Address The address within the PCI configuration space for the PCI controller.
- @param[in] Count The number of PCI configuration operations to perform. Bytes
- moved is Width size * Count, starting at Address.
- @param[in] Buffer For read operations, the destination buffer to store the results. For
- write operations, the source buffer to write data from.
-
- @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
- @retval EFI_INVALID_PARAMETER Buffer is NULL.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoPciWrite (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 Address,
- IN UINTN Count,
- IN VOID *Buffer
- );
-
-/**
- Provides the PCI controller-specific addresses required to access system memory from a
- DMA bus master.
-
- The Map() function provides the PCI controller specific addresses needed to access system
- memory. This function is used to map system memory for PCI bus master DMA accesses.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Operation Indicates if the bus master is going to read or write to system memory.
- @param[in] HostAddress The system memory address to map to the PCI controller.
- @param[in, out] NumberOfBytes On input the number of bytes to map. On output the number of bytes that were mapped.
- @param[out] DeviceAddress The resulting map address for the bus master PCI controller to use
- to access the system memory's HostAddress.
- @param[out] Mapping The value to pass to Unmap() when the bus master DMA operation is complete.
-
- @retval EFI_SUCCESS The range was mapped for the returned NumberOfBytes.
- @retval EFI_INVALID_PARAMETER Operation is invalid.
- @retval EFI_INVALID_PARAMETER HostAddress is NULL.
- @retval EFI_INVALID_PARAMETER NumberOfBytes is NULL.
- @retval EFI_INVALID_PARAMETER DeviceAddress is NULL.
- @retval EFI_INVALID_PARAMETER Mapping is NULL.
- @retval EFI_UNSUPPORTED The HostAddress cannot be mapped as a common buffer.
- @retval EFI_DEVICE_ERROR The system hardware could not map the requested address.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoMap (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_OPERATION Operation,
- IN VOID *HostAddress,
- IN OUT UINTN *NumberOfBytes,
- OUT EFI_PHYSICAL_ADDRESS *DeviceAddress,
- OUT VOID **Mapping
- );
-
-/**
- Completes the Map() operation and releases any corresponding resources.
-
- The Unmap() function completes the Map() operation and releases any corresponding resources.
- If the operation was an EfiPciOperationBusMasterWrite or
- EfiPciOperationBusMasterWrite64, the data is committed to the target system memory.
- Any resources used for the mapping are freed.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Mapping The mapping value returned from Map().
-
- @retval EFI_SUCCESS The range was unmapped.
- @retval EFI_INVALID_PARAMETER Mapping is not a value that was returned by Map().
- @retval EFI_DEVICE_ERROR The data was not committed to the target system memory.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoUnmap (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN VOID *Mapping
- );
-
-/**
- Allocates pages that are suitable for an EfiPciOperationBusMasterCommonBuffer or
- EfiPciOperationBusMasterCommonBuffer64 mapping.
-
- @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param Type This parameter is not used and must be ignored.
- @param MemoryType The type of memory to allocate, EfiBootServicesData or EfiRuntimeServicesData.
- @param Pages The number of pages to allocate.
- @param HostAddress A pointer to store the base system memory address of the allocated range.
- @param Attributes The requested bit mask of attributes for the allocated range. Only
- the attributes EFI_PCI_ATTRIBUTE_MEMORY_WRITE_COMBINE, EFI_PCI_ATTRIBUTE_MEMORY_CACHED,
- and EFI_PCI_ATTRIBUTE_DUAL_ADDRESS_CYCLE may be used with this function.
-
- @retval EFI_SUCCESS The requested memory pages were allocated.
- @retval EFI_INVALID_PARAMETER MemoryType is invalid.
- @retval EFI_INVALID_PARAMETER HostAddress is NULL.
- @retval EFI_UNSUPPORTED Attributes is unsupported. The only legal attribute bits are
- MEMORY_WRITE_COMBINE, MEMORY_CACHED, and DUAL_ADDRESS_CYCLE.
- @retval EFI_OUT_OF_RESOURCES The memory pages could not be allocated.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoAllocateBuffer (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_ALLOCATE_TYPE Type,
- IN EFI_MEMORY_TYPE MemoryType,
- IN UINTN Pages,
- OUT VOID **HostAddress,
- IN UINT64 Attributes
- );
-
-/**
- Frees memory that was allocated with AllocateBuffer().
-
- The FreeBuffer() function frees memory that was allocated with AllocateBuffer().
-
- @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param Pages The number of pages to free.
- @param HostAddress The base system memory address of the allocated range.
-
- @retval EFI_SUCCESS The requested memory pages were freed.
- @retval EFI_INVALID_PARAMETER The memory range specified by HostAddress and Pages
- was not allocated with AllocateBuffer().
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoFreeBuffer (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN UINTN Pages,
- OUT VOID *HostAddress
- );
-
-/**
- Flushes all PCI posted write transactions from a PCI host bridge to system memory.
-
- The Flush() function flushes any PCI posted write transactions from a PCI host bridge to system
- memory. Posted write transactions are generated by PCI bus masters when they perform write
- transactions to target addresses in system memory.
- This function does not flush posted write transactions from any PCI bridges. A PCI controller
- specific action must be taken to guarantee that the posted write transactions have been flushed from
- the PCI controller and from all the PCI bridges into the PCI host bridge. This is typically done with
- a PCI read transaction from the PCI controller prior to calling Flush().
-
- @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
-
- @retval EFI_SUCCESS The PCI posted write transactions were flushed from the PCI host
- bridge to system memory.
- @retval EFI_DEVICE_ERROR The PCI posted write transactions were not flushed from the PCI
- host bridge due to a hardware error.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoFlush (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This
- );
-
-/**
- Gets the attributes that a PCI root bridge supports setting with SetAttributes(), and the
- attributes that a PCI root bridge is currently using.
-
- The GetAttributes() function returns the mask of attributes that this PCI root bridge supports
- and the mask of attributes that the PCI root bridge is currently using.
-
- @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param Supported A pointer to the mask of attributes that this PCI root bridge
- supports setting with SetAttributes().
- @param Attributes A pointer to the mask of attributes that this PCI root bridge is
- currently using.
-
- @retval EFI_SUCCESS If Supports is not NULL, then the attributes that the PCI root
- bridge supports is returned in Supports. If Attributes is
- not NULL, then the attributes that the PCI root bridge is currently
- using is returned in Attributes.
- @retval EFI_INVALID_PARAMETER Both Supports and Attributes are NULL.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoGetAttributes (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- OUT UINT64 *Supported,
- OUT UINT64 *Attributes
- );
-
-/**
- Sets attributes for a resource range on a PCI root bridge.
-
- The SetAttributes() function sets the attributes specified in Attributes for the PCI root
- bridge on the resource range specified by ResourceBase and ResourceLength. Since the
- granularity of setting these attributes may vary from resource type to resource type, and from
- platform to platform, the actual resource range and the one passed in by the caller may differ. As a
- result, this function may set the attributes specified by Attributes on a larger resource range
- than the caller requested. The actual range is returned in ResourceBase and
- ResourceLength. The caller is responsible for verifying that the actual range for which the
- attributes were set is acceptable.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Attributes The mask of attributes to set. If the attribute bit
- MEMORY_WRITE_COMBINE, MEMORY_CACHED, or
- MEMORY_DISABLE is set, then the resource range is specified by
- ResourceBase and ResourceLength. If
- MEMORY_WRITE_COMBINE, MEMORY_CACHED, and
- MEMORY_DISABLE are not set, then ResourceBase and
- ResourceLength are ignored, and may be NULL.
- @param[in, out] ResourceBase A pointer to the base address of the resource range to be modified
- by the attributes specified by Attributes.
- @param[in, out] ResourceLength A pointer to the length of the resource range to be modified by the
- attributes specified by Attributes.
-
- @retval EFI_SUCCESS The current configuration of this PCI root bridge was returned in Resources.
- @retval EFI_UNSUPPORTED The current configuration of this PCI root bridge could not be retrieved.
- @retval EFI_INVALID_PARAMETER Invalid pointer of EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoSetAttributes (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN UINT64 Attributes,
- IN OUT UINT64 *ResourceBase,
- IN OUT UINT64 *ResourceLength
- );
-
-/**
- Retrieves the current resource settings of this PCI root bridge in the form of a set of ACPI 2.0
- resource descriptors.
-
- There are only two resource descriptor types from the ACPI Specification that may be used to
- describe the current resources allocated to a PCI root bridge. These are the QWORD Address
- Space Descriptor (ACPI 2.0 Section 6.4.3.5.1), and the End Tag (ACPI 2.0 Section 6.4.2.8). The
- QWORD Address Space Descriptor can describe memory, I/O, and bus number ranges for dynamic
- or fixed resources. The configuration of a PCI root bridge is described with one or more QWORD
- Address Space Descriptors followed by an End Tag.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[out] Resources A pointer to the ACPI 2.0 resource descriptors that describe the
- current configuration of this PCI root bridge. The storage for the
- ACPI 2.0 resource descriptors is allocated by this function. The
- caller must treat the return buffer as read-only data, and the buffer
- must not be freed by the caller.
-
- @retval EFI_SUCCESS The current configuration of this PCI root bridge was returned in Resources.
- @retval EFI_UNSUPPORTED The current configuration of this PCI root bridge could not be retrieved.
- @retval EFI_INVALID_PARAMETER Invalid pointer of EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoConfiguration (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- OUT VOID **Resources
- );
-
-//
-// Memory Controller Pci Root Bridge Io Module Variables
-//
-EFI_METRONOME_ARCH_PROTOCOL *mMetronome;
-
-//
-// Lookup table for increment values based on transfer widths
-//
-UINT8 mInStride[] = {
- 1, // EfiPciWidthUint8
- 2, // EfiPciWidthUint16
- 4, // EfiPciWidthUint32
- 8, // EfiPciWidthUint64
- 0, // EfiPciWidthFifoUint8
- 0, // EfiPciWidthFifoUint16
- 0, // EfiPciWidthFifoUint32
- 0, // EfiPciWidthFifoUint64
- 1, // EfiPciWidthFillUint8
- 2, // EfiPciWidthFillUint16
- 4, // EfiPciWidthFillUint32
- 8 // EfiPciWidthFillUint64
-};
-
-//
-// Lookup table for increment values based on transfer widths
-//
-UINT8 mOutStride[] = {
- 1, // EfiPciWidthUint8
- 2, // EfiPciWidthUint16
- 4, // EfiPciWidthUint32
- 8, // EfiPciWidthUint64
- 1, // EfiPciWidthFifoUint8
- 2, // EfiPciWidthFifoUint16
- 4, // EfiPciWidthFifoUint32
- 8, // EfiPciWidthFifoUint64
- 0, // EfiPciWidthFillUint8
- 0, // EfiPciWidthFillUint16
- 0, // EfiPciWidthFillUint32
- 0 // EfiPciWidthFillUint64
-};
-
-
-UINT64 GetPcieCfgAddress (
- UINT64 Ecam,
- UINTN Bus,
- UINTN Device,
- UINTN Function,
- UINTN Reg
- )
-{
- return Ecam + PCI_EXPRESS_LIB_ADDRESS (Bus, Device, Function, Reg);
-}
-
-
-BOOLEAN PcieIsLinkUp (UINT32 SocType, UINTN RbPciBar, UINTN Port)
-{
- UINT32 Value = 0;
-
- if (0x1610 == SocType)
- {
- Value = MmioRead32(RbPciBar + 0x131C);
- if ((Value & 0x3F) == 0x11)
- {
- return TRUE;
- }
- return FALSE;
- }
- else
- {
- Value = MmioRead32 (0xb0000000 + 0x6818 + 0x100 * Port);
- if ((Value & 0x3F) == 0x11)
- {
- return TRUE;
- }
- return FALSE;
- }
-}
-
-/**
-
- Construct the Pci Root Bridge Io protocol
-
- @param Protocol Point to protocol instance
- @param HostBridgeHandle Handle of host bridge
- @param Attri Attribute of host bridge
- @param ResAppeture ResourceAppeture for host bridge
-
- @retval EFI_SUCCESS Success to initialize the Pci Root Bridge.
-
-**/
-EFI_STATUS
-RootBridgeConstructor (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *Protocol,
- IN EFI_HANDLE HostBridgeHandle,
- IN UINT64 Attri,
- IN PCI_ROOT_BRIDGE_RESOURCE_APPETURE *ResAppeture,
- IN UINT32 Seg
- )
-{
- EFI_STATUS Status;
- PCI_ROOT_BRIDGE_INSTANCE *PrivateData;
- PCI_RESOURCE_TYPE Index;
-
- PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS (Protocol);
-
- //
- // The host to pci bridge, the host memory and io addresses are
- // direct mapped to pci addresses, so no need translate, set bases to 0.
- //
- PrivateData->MemBase = ResAppeture->MemBase;
- PrivateData->IoBase = ResAppeture->IoBase;
- PrivateData->RbPciBar = ResAppeture->RbPciBar;
- PrivateData->MemLimit = ResAppeture->MemLimit;
- PrivateData->IoLimit = ResAppeture->IoLimit;
- PrivateData->Ecam = ResAppeture->Ecam;
- PrivateData->CpuMemRegionBase = ResAppeture->CpuMemRegionBase;
- PrivateData->CpuIoRegionBase = ResAppeture->CpuIoRegionBase;
- PrivateData->PciRegionBase = ResAppeture->PciRegionBase;
- PrivateData->PciRegionLimit = ResAppeture->PciRegionLimit;
-
- //
- // Bus Appeture for this Root Bridge (Possible Range)
- //
- PrivateData->BusBase = ResAppeture->BusBase;
- PrivateData->BusLimit = ResAppeture->BusLimit;
-
- //
- // Specific for this chipset
- //
- for (Index = TypeIo; Index < TypeMax; Index++) {
- PrivateData->ResAllocNode[Index].Type = Index;
- PrivateData->ResAllocNode[Index].Base = 0;
- PrivateData->ResAllocNode[Index].Length = 0;
- PrivateData->ResAllocNode[Index].Status = ResNone;
- }
-
- PrivateData->RootBridgeAttrib = Attri;
-
- PrivateData->Supports = EFI_PCI_ATTRIBUTE_IDE_PRIMARY_IO | EFI_PCI_ATTRIBUTE_IDE_SECONDARY_IO | \
- EFI_PCI_ATTRIBUTE_ISA_IO_16 | EFI_PCI_ATTRIBUTE_ISA_MOTHERBOARD_IO | \
- EFI_PCI_ATTRIBUTE_VGA_MEMORY | \
- EFI_PCI_ATTRIBUTE_VGA_IO_16 | EFI_PCI_ATTRIBUTE_VGA_PALETTE_IO_16 | \
- EFI_PCI_ATTRIBUTE_VALID_FOR_ALLOCATE_BUFFER;
- PrivateData->Attributes = PrivateData->Supports;
-
- Protocol->ParentHandle = HostBridgeHandle;
-
- Protocol->PollMem = RootBridgeIoPollMem;
- Protocol->PollIo = RootBridgeIoPollIo;
-
- Protocol->Mem.Read = RootBridgeIoMemRead;
- Protocol->Mem.Write = RootBridgeIoMemWrite;
-
- Protocol->Io.Read = RootBridgeIoIoRead;
- Protocol->Io.Write = RootBridgeIoIoWrite;
-
- Protocol->CopyMem = RootBridgeIoCopyMem;
-
- Protocol->Pci.Read = RootBridgeIoPciRead;
- Protocol->Pci.Write = RootBridgeIoPciWrite;
-
- Protocol->Map = RootBridgeIoMap;
- Protocol->Unmap = RootBridgeIoUnmap;
-
- Protocol->AllocateBuffer = RootBridgeIoAllocateBuffer;
- Protocol->FreeBuffer = RootBridgeIoFreeBuffer;
-
- Protocol->Flush = RootBridgeIoFlush;
-
- Protocol->GetAttributes = RootBridgeIoGetAttributes;
- Protocol->SetAttributes = RootBridgeIoSetAttributes;
-
- Protocol->Configuration = RootBridgeIoConfiguration;
-
- Protocol->SegmentNumber = Seg;
-
-
- Status = gBS->LocateProtocol (&gEfiMetronomeArchProtocolGuid, NULL, (VOID **)&mMetronome);
- if (EFI_ERROR(Status))
- {
- DEBUG((EFI_D_ERROR,"LocateProtocol MetronomeArchProtocol Error\n"));
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- Check parameters for IO,MMIO,PCI read/write services of PCI Root Bridge IO.
-
- The I/O operations are carried out exactly as requested. The caller is responsible
- for satisfying any alignment and I/O width restrictions that a PI System on a
- platform might require. For example on some platforms, width requests of
- EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will
- be handled by the driver.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] OperationType I/O operation type: IO/MMIO/PCI.
- @param[in] Width Signifies the width of the I/O or Memory operation.
- @param[in] Address The base address of the I/O operation.
- @param[in] Count The number of I/O operations to perform. The number of
- bytes moved is Width size * Count, starting at Address.
- @param[in] Buffer For read operations, the destination buffer to store the results.
- For write operations, the source buffer from which to write data.
-
- @retval EFI_SUCCESS The parameters for this request pass the checks.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.
- @retval EFI_INVALID_PARAMETER Buffer is NULL.
- @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.
- @retval EFI_UNSUPPORTED The address range specified by Address, Width,
- and Count is not valid for this PI system.
-
-**/
-EFI_STATUS
-RootBridgeIoCheckParameter (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN OPERATION_TYPE OperationType,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 Address,
- IN UINTN Count,
- IN VOID *Buffer
- )
-{
- PCI_ROOT_BRIDGE_INSTANCE *PrivateData;
- EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS *PciRbAddr;
- UINT64 MaxCount;
- UINT64 Base;
- UINT64 Limit;
-
- //
- // Check to see if Buffer is NULL
- //
- if (Buffer == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // Check to see if Width is in the valid range
- //
- if ((UINT32)Width >= EfiPciWidthMaximum) {
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // For FIFO type, the target address won't increase during the access,
- // so treat Count as 1
- //
- if (Width >= EfiPciWidthFifoUint8 && Width <= EfiPciWidthFifoUint64) {
- Count = 1;
- }
-
- //
- // Check to see if Width is in the valid range for I/O Port operations
- //
- Width = (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) (Width & 0x03);
- if ((OperationType != MemOperation) && (Width == EfiPciWidthUint64)) {
- ASSERT (FALSE);
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // Check to see if Address is aligned
- //
- if ((Address & (UINT64)(mInStride[Width] - 1)) != 0) {
- return EFI_UNSUPPORTED;
- }
-
- PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS (This);
-
- //
- // Check to see if any address associated with this transfer exceeds the maximum
- // allowed address. The maximum address implied by the parameters passed in is
- // Address + Size * Count. If the following condition is met, then the transfer
- // is not supported.
- //
- // Address + Size * Count > Limit + 1
- //
- // Since Limit can be the maximum integer value supported by the CPU and Count
- // can also be the maximum integer value supported by the CPU, this range
- // check must be adjusted to avoid all oveflow conditions.
- //
- // The following form of the range check is equivalent but assumes that
- // Limit is of the form (2^n - 1).
- //
- if (OperationType == IoOperation) {
- Base = PrivateData->IoBase;
- Limit = PrivateData->IoLimit;
- } else if (OperationType == MemOperation) {
- Base = PrivateData->MemBase;
- Limit = PrivateData->MemLimit;
- } else {
- PciRbAddr = (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS*) &Address;
- if (PciRbAddr->Bus < PrivateData->BusBase || PciRbAddr->Bus > PrivateData->BusLimit) {
- return EFI_INVALID_PARAMETER;
- }
-
- /* The root complex has only one device / function */
- if (PciRbAddr->Bus == PrivateData->BusBase && PciRbAddr->Device != 0) {
- return EFI_INVALID_PARAMETER;
- }
-
- /* The other side of the RC has only one device as well */
- if (PciRbAddr->Bus == (PrivateData->BusBase + 1 ) && PciRbAddr->Device != 0) {
- return EFI_INVALID_PARAMETER;
- }
-
- if (PciRbAddr->Device > MAX_PCI_DEVICE_NUMBER || PciRbAddr->Function > MAX_PCI_FUNCTION_NUMBER) {
- return EFI_INVALID_PARAMETER;
- }
-
- if (PciRbAddr->ExtendedRegister != 0) {
- Address = PciRbAddr->ExtendedRegister;
- } else {
- Address = PciRbAddr->Register;
- }
- Base = 0;
- Limit = MAX_PCI_REG_ADDRESS;
- }
-
- if (Address < Base) {
- return EFI_INVALID_PARAMETER;
- }
-
- if (Count == 0) {
- if (Address > Limit) {
- return EFI_UNSUPPORTED;
- }
- } else {
- MaxCount = RShiftU64 (Limit, Width);
- if (MaxCount < (Count - 1)) {
- return EFI_UNSUPPORTED;
- }
- if (Address > LShiftU64 (MaxCount - Count + 1, Width)) {
- return EFI_UNSUPPORTED;
- }
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- Internal help function for read and write memory space.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Write Switch value for Read or Write.
- @param[in] Width Signifies the width of the memory operations.
- @param[in] UserAddress The address within the PCI configuration space for the PCI controller.
- @param[in] Count The number of PCI configuration operations to perform. Bytes
- moved is Width size * Count, starting at Address.
- @param[in, out] UserBuffer For read operations, the destination buffer to store the results. For
- write operations, the source buffer to write data from.
-
- @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
- @retval EFI_INVALID_PARAMETER Buffer is NULL.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-RootBridgeIoMemRW (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN BOOLEAN Write,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 Address,
- IN UINTN Count,
- IN OUT VOID *Buffer
- )
-{
- EFI_STATUS Status;
- UINT8 InStride;
- UINT8 OutStride;
- EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH OperationWidth;
- UINT8 *Uint8Buffer;
- PCI_ROOT_BRIDGE_INSTANCE *PrivateData;
-
- PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS (This);
- /* Address is bus resource */
- Address -= PrivateData->PciRegionBase;
- Address += PrivateData->CpuMemRegionBase;
-
- PCIE_DEBUG("RootBridgeIoMemRW Address:0x%llx\n", Address);
- PCIE_DEBUG("RootBridgeIoMemRW Count:0x%llx\n", Count);
- PCIE_DEBUG("RootBridgeIoMemRW Write:0x%llx\n", Write);
- PCIE_DEBUG("RootBridgeIoMemRW Width:0x%llx\n", Width);
-
- Status = RootBridgeIoCheckParameter (This, MemOperation, Width, Address, Count, Buffer);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- InStride = mInStride[Width];
- OutStride = mOutStride[Width];
- OperationWidth = (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) (Width & 0x03);
- for (Uint8Buffer = Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) {
- if (Write) {
- switch (OperationWidth) {
- case EfiPciWidthUint8:
- MmioWrite8 ((UINTN)Address, *Uint8Buffer);
- break;
- case EfiPciWidthUint16:
- MmioWrite16 ((UINTN)Address, *((UINT16 *)Uint8Buffer));
- break;
- case EfiPciWidthUint32:
- MmioWrite32 ((UINTN)Address, *((UINT32 *)Uint8Buffer));
- break;
- case EfiPciWidthUint64:
- MmioWrite64 ((UINTN)Address, *((UINT64 *)Uint8Buffer));
- break;
- default:
- //
- // The RootBridgeIoCheckParameter call above will ensure that this
- // path is not taken.
- //
- ASSERT (FALSE);
- break;
- }
- } else {
- switch (OperationWidth) {
- case EfiPciWidthUint8:
- *Uint8Buffer = MmioRead8 ((UINTN)Address);
- break;
- case EfiPciWidthUint16:
- *((UINT16 *)Uint8Buffer) = MmioRead16 ((UINTN)Address);
- break;
- case EfiPciWidthUint32:
- *((UINT32 *)Uint8Buffer) = MmioRead32 ((UINTN)Address);
- break;
- case EfiPciWidthUint64:
- *((UINT64 *)Uint8Buffer) = MmioRead64 ((UINTN)Address);
- break;
- default:
- //
- // The RootBridgeIoCheckParameter call above will ensure that this
- // path is not taken.
- //
- ASSERT (FALSE);
- break;
- }
- }
- }
- return EFI_SUCCESS;
-}
-
-/**
- Internal help function for read and write IO space.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Write Switch value for Read or Write.
- @param[in] Width Signifies the width of the memory operations.
- @param[in] UserAddress The address within the PCI configuration space for the PCI controller.
- @param[in] Count The number of PCI configuration operations to perform. Bytes
- moved is Width size * Count, starting at Address.
- @param[in, out] UserBuffer For read operations, the destination buffer to store the results. For
- write operations, the source buffer to write data from.
-
- @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
- @retval EFI_INVALID_PARAMETER Buffer is NULL.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-RootBridgeIoIoRW (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN BOOLEAN Write,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 Address,
- IN UINTN Count,
- IN OUT VOID *Buffer
- )
-{
- EFI_STATUS Status;
- UINT8 InStride;
- UINT8 OutStride;
- EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH OperationWidth;
- UINT8 *Uint8Buffer;
- PCI_ROOT_BRIDGE_INSTANCE *PrivateData;
-
- PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS (This);
- /* Address is bus resource */
- Address -= PrivateData->IoBase;
- Address += PrivateData->CpuIoRegionBase;
-
- Status = RootBridgeIoCheckParameter (This, IoOperation, Width, Address, Count, Buffer);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- InStride = mInStride[Width];
- OutStride = mOutStride[Width];
- OperationWidth = (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) (Width & 0x03);
-
- for (Uint8Buffer = Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) {
- if (Write) {
- switch (OperationWidth) {
- case EfiPciWidthUint8:
- MmioWrite8 ((UINTN)Address, *Uint8Buffer);
- break;
- case EfiPciWidthUint16:
- MmioWrite16 ((UINTN)Address, *((UINT16 *)Uint8Buffer));
- break;
- case EfiPciWidthUint32:
- MmioWrite32 ((UINTN)Address, *((UINT32 *)Uint8Buffer));
- break;
- case EfiPciWidthUint64:
- MmioWrite64 ((UINTN)Address, *((UINT64 *)Uint8Buffer));
- break;
- default:
- //
- // The RootBridgeIoCheckParameter call above will ensure that this
- // path is not taken.
- //
- ASSERT (FALSE);
- break;
- }
- } else {
- switch (OperationWidth) {
- case EfiPciWidthUint8:
- *Uint8Buffer = MmioRead8 ((UINTN)Address);
- break;
- case EfiPciWidthUint16:
- *((UINT16 *)Uint8Buffer) = MmioRead16 ((UINTN)Address);
- break;
- case EfiPciWidthUint32:
- *((UINT32 *)Uint8Buffer) = MmioRead32 ((UINTN)Address);
- break;
- case EfiPciWidthUint64:
- *((UINT64 *)Uint8Buffer) = MmioRead64 ((UINTN)Address);
- break;
- default:
- //
- // The RootBridgeIoCheckParameter call above will ensure that this
- // path is not taken.
- //
- ASSERT (FALSE);
- break;
- }
- }
- }
- return EFI_SUCCESS;
-}
-
-
-/**
- Polls an address in memory mapped I/O space until an exit condition is met, or
- a timeout occurs.
-
- This function provides a standard way to poll a PCI memory location. A PCI memory read
- operation is performed at the PCI memory address specified by Address for the width specified
- by Width. The result of this PCI memory read operation is stored in Result. This PCI memory
- read operation is repeated until either a timeout of Delay 100 ns units has expired, or (Result &
- Mask) is equal to Value.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Width Signifies the width of the memory operations.
- @param[in] Address The base address of the memory operations. The caller is
- responsible for aligning Address if required.
- @param[in] Mask Mask used for the polling criteria. Bytes above Width in Mask
- are ignored. The bits in the bytes below Width which are zero in
- Mask are ignored when polling the memory address.
- @param[in] Value The comparison value used for the polling exit criteria.
- @param[in] Delay The number of 100 ns units to poll. Note that timer available may
- be of poorer granularity.
- @param[out] Result Pointer to the last value read from the memory location.
-
- @retval EFI_SUCCESS The last data returned from the access matched the poll exit criteria.
- @retval EFI_INVALID_PARAMETER Width is invalid.
- @retval EFI_INVALID_PARAMETER Result is NULL.
- @retval EFI_TIMEOUT Delay expired before a match occurred.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoPollMem (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 Address,
- IN UINT64 Mask,
- IN UINT64 Value,
- IN UINT64 Delay,
- OUT UINT64 *Result
- )
-{
- EFI_STATUS Status;
- UINT64 NumberOfTicks;
- UINT32 Remainder;
-
- if (Result == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // No matter what, always do a single poll.
- //
- Status = This->Mem.Read (This, Width, Address, 1, Result);
- if (EFI_ERROR (Status)) {
- return Status;
- }
- if ((*Result & Mask) == Value) {
- return EFI_SUCCESS;
- }
-
- if (Delay == 0) {
- return EFI_TIMEOUT;
-
- } else {
-
- //
- // Determine the proper # of metronome ticks to wait for polling the
- // location. The nuber of ticks is Roundup (Delay / mMetronome->TickPeriod)+1
- // The "+1" to account for the possibility of the first tick being short
- // because we started in the middle of a tick.
- //
- // BugBug: overriding mMetronome->TickPeriod with UINT32 until Metronome
- // protocol definition is updated.
- //
- NumberOfTicks = DivU64x32Remainder (Delay, (UINT32) mMetronome->TickPeriod, &Remainder);
- if (Remainder != 0) {
- NumberOfTicks += 1;
- }
- NumberOfTicks += 1;
-
- while (NumberOfTicks != 0) {
-
- mMetronome->WaitForTick (mMetronome, 1);
-
- Status = This->Mem.Read (This, Width, Address, 1, Result);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- if ((*Result & Mask) == Value) {
- return EFI_SUCCESS;
- }
-
- NumberOfTicks -= 1;
- }
- }
- return EFI_TIMEOUT;
-}
-
-/**
- Reads from the I/O space of a PCI Root Bridge. Returns when either the polling exit criteria is
- satisfied or after a defined duration.
-
- This function provides a standard way to poll a PCI I/O location. A PCI I/O read operation is
- performed at the PCI I/O address specified by Address for the width specified by Width.
- The result of this PCI I/O read operation is stored in Result. This PCI I/O read operation is
- repeated until either a timeout of Delay 100 ns units has expired, or (Result & Mask) is equal
- to Value.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Width Signifies the width of the I/O operations.
- @param[in] Address The base address of the I/O operations. The caller is responsible
- for aligning Address if required.
- @param[in] Mask Mask used for the polling criteria. Bytes above Width in Mask
- are ignored. The bits in the bytes below Width which are zero in
- Mask are ignored when polling the I/O address.
- @param[in] Value The comparison value used for the polling exit criteria.
- @param[in] Delay The number of 100 ns units to poll. Note that timer available may
- be of poorer granularity.
- @param[out] Result Pointer to the last value read from the memory location.
-
- @retval EFI_SUCCESS The last data returned from the access matched the poll exit criteria.
- @retval EFI_INVALID_PARAMETER Width is invalid.
- @retval EFI_INVALID_PARAMETER Result is NULL.
- @retval EFI_TIMEOUT Delay expired before a match occurred.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoPollIo (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 Address,
- IN UINT64 Mask,
- IN UINT64 Value,
- IN UINT64 Delay,
- OUT UINT64 *Result
- )
-{
- EFI_STATUS Status;
- UINT64 NumberOfTicks;
- UINT32 Remainder;
-
- //
- // No matter what, always do a single poll.
- //
-
- if (Result == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- Status = This->Io.Read (This, Width, Address, 1, Result);
- if (EFI_ERROR (Status)) {
- return Status;
- }
- if ((*Result & Mask) == Value) {
- return EFI_SUCCESS;
- }
-
- if (Delay == 0) {
- return EFI_SUCCESS;
-
- } else {
-
- //
- // Determine the proper # of metronome ticks to wait for polling the
- // location. The number of ticks is Roundup (Delay / mMetronome->TickPeriod)+1
- // The "+1" to account for the possibility of the first tick being short
- // because we started in the middle of a tick.
- //
- NumberOfTicks = DivU64x32Remainder (Delay, (UINT32)mMetronome->TickPeriod, &Remainder);
- if (Remainder != 0) {
- NumberOfTicks += 1;
- }
- NumberOfTicks += 1;
-
- while (NumberOfTicks != 0) {
-
- mMetronome->WaitForTick (mMetronome, 1);
-
- Status = This->Io.Read (This, Width, Address, 1, Result);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- if ((*Result & Mask) == Value) {
- return EFI_SUCCESS;
- }
-
- NumberOfTicks -= 1;
- }
- }
- return EFI_TIMEOUT;
-}
-
-/**
- Enables a PCI driver to access PCI controller registers in the PCI root bridge memory space.
-
- The Mem.Read(), and Mem.Write() functions enable a driver to access PCI controller
- registers in the PCI root bridge memory space.
- The memory operations are carried out exactly as requested. The caller is responsible for satisfying
- any alignment and memory width restrictions that a PCI Root Bridge on a platform might require.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Width Signifies the width of the memory operation.
- @param[in] Address The base address of the memory operation. The caller is
- responsible for aligning the Address if required.
- @param[in] Count The number of memory operations to perform. Bytes moved is
- Width size * Count, starting at Address.
- @param[out] Buffer For read operations, the destination buffer to store the results. For
- write operations, the source buffer to write data from.
-
- @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
- @retval EFI_INVALID_PARAMETER Buffer is NULL.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoMemRead (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 Address,
- IN UINTN Count,
- OUT VOID *Buffer
- )
-{
- return RootBridgeIoMemRW (This, FALSE, Width, Address, Count, Buffer);
-}
-
-/**
- Enables a PCI driver to access PCI controller registers in the PCI root bridge memory space.
-
- The Mem.Read(), and Mem.Write() functions enable a driver to access PCI controller
- registers in the PCI root bridge memory space.
- The memory operations are carried out exactly as requested. The caller is responsible for satisfying
- any alignment and memory width restrictions that a PCI Root Bridge on a platform might require.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Width Signifies the width of the memory operation.
- @param[in] Address The base address of the memory operation. The caller is
- responsible for aligning the Address if required.
- @param[in] Count The number of memory operations to perform. Bytes moved is
- Width size * Count, starting at Address.
- @param[in] Buffer For read operations, the destination buffer to store the results. For
- write operations, the source buffer to write data from.
-
- @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
- @retval EFI_INVALID_PARAMETER Buffer is NULL.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoMemWrite (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 Address,
- IN UINTN Count,
- IN VOID *Buffer
- )
-{
- return RootBridgeIoMemRW (This, TRUE, Width, Address, Count, Buffer);
-}
-
-/**
- Enables a PCI driver to access PCI controller registers in the PCI root bridge I/O space.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Width Signifies the width of the memory operations.
- @param[in] Address The base address of the I/O operation. The caller is responsible for
- aligning the Address if required.
- @param[in] Count The number of I/O operations to perform. Bytes moved is Width
- size * Count, starting at Address.
- @param[out] Buffer For read operations, the destination buffer to store the results. For
- write operations, the source buffer to write data from.
-
- @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
- @retval EFI_INVALID_PARAMETER Buffer is NULL.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoIoRead (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 Address,
- IN UINTN Count,
- OUT VOID *Buffer
- )
-{
- return RootBridgeIoIoRW (This, FALSE, Width, Address, Count, Buffer);
-}
-
-/**
- Enables a PCI driver to access PCI controller registers in the PCI root bridge I/O space.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Width Signifies the width of the memory operations.
- @param[in] Address The base address of the I/O operation. The caller is responsible for
- aligning the Address if required.
- @param[in] Count The number of I/O operations to perform. Bytes moved is Width
- size * Count, starting at Address.
- @param[in] Buffer For read operations, the destination buffer to store the results. For
- write operations, the source buffer to write data from.
-
- @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
- @retval EFI_INVALID_PARAMETER Buffer is NULL.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoIoWrite (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 Address,
- IN UINTN Count,
- IN VOID *Buffer
- )
-{
- return RootBridgeIoIoRW (This, TRUE, Width, Address, Count, Buffer);
-}
-
-/**
- Enables a PCI driver to copy one region of PCI root bridge memory space to another region of PCI
- root bridge memory space.
-
- The CopyMem() function enables a PCI driver to copy one region of PCI root bridge memory
- space to another region of PCI root bridge memory space. This is especially useful for video scroll
- operation on a memory mapped video buffer.
- The memory operations are carried out exactly as requested. The caller is responsible for satisfying
- any alignment and memory width restrictions that a PCI root bridge on a platform might require.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL instance.
- @param[in] Width Signifies the width of the memory operations.
- @param[in] DestAddress The destination address of the memory operation. The caller is
- responsible for aligning the DestAddress if required.
- @param[in] SrcAddress The source address of the memory operation. The caller is
- responsible for aligning the SrcAddress if required.
- @param[in] Count The number of memory operations to perform. Bytes moved is
- Width size * Count, starting at DestAddress and SrcAddress.
-
- @retval EFI_SUCCESS The data was copied from one memory region to another memory region.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoCopyMem (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 DestAddress,
- IN UINT64 SrcAddress,
- IN UINTN Count
- )
-{
- EFI_STATUS Status;
- BOOLEAN Direction;
- UINTN Stride;
- UINTN Index;
- UINT64 Result;
-
- if ((UINT32)Width > EfiPciWidthUint64) {
- return EFI_INVALID_PARAMETER;
- }
-
- if (DestAddress == SrcAddress) {
- return EFI_SUCCESS;
- }
-
- Stride = (UINTN)((UINTN)1 << Width);
-
- Direction = TRUE;
- if ((DestAddress > SrcAddress) && (DestAddress < (SrcAddress + Count * Stride))) {
- Direction = FALSE;
- SrcAddress = SrcAddress + (Count-1) * Stride;
- DestAddress = DestAddress + (Count-1) * Stride;
- }
-
- for (Index = 0;Index < Count;Index++) {
- Status = RootBridgeIoMemRead (
- This,
- Width,
- SrcAddress,
- 1,
- &Result
- );
- if (EFI_ERROR (Status)) {
- return Status;
- }
- Status = RootBridgeIoMemWrite (
- This,
- Width,
- DestAddress,
- 1,
- &Result
- );
- if (EFI_ERROR (Status)) {
- return Status;
- }
- if (Direction) {
- SrcAddress += Stride;
- DestAddress += Stride;
- } else {
- SrcAddress -= Stride;
- DestAddress -= Stride;
- }
- }
- return EFI_SUCCESS;
-}
-
-/**
- Reads memory-mapped registers.
- @param[in] Width Signifies the width of the I/O or Memory operation.
- @param[in] Address The base address of the I/O operation.
- @param[in] Count The number of I/O operations to perform. The number of
- bytes moved is Width size * Count, starting at Address.
- @param[out] Buffer For read operations, the destination buffer to store the results.
- For write operations, the source buffer from which to write data.
-
- @retval EFI_SUCCESS The data was read from or written to the PI system.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.
- @retval EFI_INVALID_PARAMETER Buffer is NULL.
- @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.
- @retval EFI_UNSUPPORTED The address range specified by Address, Width,
- and Count is not valid for this PI system.
-
-**/
-EFI_STATUS
-CpuMemoryServiceRead (
- IN EFI_CPU_IO_PROTOCOL_WIDTH Width,
- IN UINT64 Address,
- IN UINTN Count,
- OUT VOID *Buffer
- )
-{
-
- UINT8 InStride;
- UINT8 OutStride;
- EFI_CPU_IO_PROTOCOL_WIDTH OperationWidth;
- UINT8 *Uint8Buffer;
- UINT32 Uint32Buffer = 0;
-
- //
- // Select loop based on the width of the transfer
- //
- InStride = mInStride[Width];
- OutStride = mOutStride[Width];
- OperationWidth = (EFI_CPU_IO_PROTOCOL_WIDTH) (Width & 0x03);
- for (Uint8Buffer = Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) {
- if (OperationWidth == EfiCpuIoWidthUint8) {
- Uint32Buffer = MmioRead32((UINTN)(Address & (~0x3)));
- Uint32Buffer &= (0xFF << ((Address & 0x3) * 8));
- *((UINT8*)Uint8Buffer) = (UINT8)(Uint32Buffer >> (((Address & 0x3) * 8)));
- } else if (OperationWidth == EfiCpuIoWidthUint16) {
- if (((Address & 0x3) == 1) || ((Address & 0x3) == 3)) {
- return EFI_INVALID_PARAMETER;
- }
- Uint32Buffer = MmioRead32((UINTN)(Address & (~0x3)));
- Uint32Buffer &= (0xFFFF << ((Address & 0x3) * 8));
- *(UINT16 *)Uint8Buffer = (UINT16)(Uint32Buffer >> (((Address & 0x3) * 8)));
- } else if (OperationWidth == EfiCpuIoWidthUint32) {
- *((UINT32 *)Uint8Buffer) = MmioRead32 ((UINTN)Address);
- } else if (OperationWidth == EfiCpuIoWidthUint64) {
- *((UINT64 *)Uint8Buffer) = MmioRead64 ((UINTN)Address);
- }
- }
- return EFI_SUCCESS;
-}
-
-/**
- Enables a PCI driver to access PCI controller registers in a PCI root bridge's configuration space.
-
- The Pci.Read() and Pci.Write() functions enable a driver to access PCI configuration
- registers for a PCI controller.
- The PCI Configuration operations are carried out exactly as requested. The caller is responsible for
- any alignment and PCI configuration width issues that a PCI Root Bridge on a platform might
- require.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Width Signifies the width of the memory operations.
- @param[in] Address The address within the PCI configuration space for the PCI controller.
- @param[in] Count The number of PCI configuration operations to perform. Bytes
- moved is Width size * Count, starting at Address.
- @param[out] Buffer For read operations, the destination buffer to store the results. For
- write operations, the source buffer to write data from.
-
- @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
- @retval EFI_INVALID_PARAMETER Buffer is NULL.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoPciRead (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 EfiAddress,
- IN UINTN Count,
- OUT VOID *Buffer
- )
-{
- UINT32 Offset;
- EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS *EfiPciAddress;
- UINT64 Address;
- PCI_ROOT_BRIDGE_INSTANCE *PrivateData;
-
- EfiPciAddress = (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS *)&EfiAddress;
- PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS(This);
-
- if (Buffer == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- if (Width >= EfiPciWidthMaximum) {
- return EFI_INVALID_PARAMETER;
- }
-
- if (EfiPciAddress->ExtendedRegister) {
- Offset = EfiPciAddress->ExtendedRegister;
- } else {
- Offset = EfiPciAddress->Register;
- }
-
- PCIE_DEBUG ("[%a:%d] - bus %x dev %x func %x Off %x\n", __FUNCTION__, __LINE__,
- EfiPciAddress->Bus,
- EfiPciAddress->Device,
- EfiPciAddress->Function,
- Offset
- );
- if (EfiPciAddress->Bus < PrivateData->BusBase || EfiPciAddress->Bus > PrivateData->BusLimit) {
- PCIE_DEBUG ("[%a:%d] - Bus number out of range %d\n", __FUNCTION__, __LINE__, EfiPciAddress->Bus);
- SetMem (Buffer, mOutStride[Width] * Count, 0xFF);
- return EFI_INVALID_PARAMETER;
- }
-
- // The UEFI PCI enumerator scans for devices at all possible addresses,
- // and ignores some PCI rules - this results in some hardware being
- // detected multiple times. We work around this by faking absent
- // devices
- if(EfiPciAddress->Bus == PrivateData->BusBase)
- {
- if((EfiPciAddress->Device != 0x0) || (EfiPciAddress->Function != 0)) {
- SetMem (Buffer, mOutStride[Width] * Count, 0xFF);
- return EFI_UNSUPPORTED;
- }
- }
-
- if (EfiPciAddress->Bus == PrivateData->BusBase){
- Address = PrivateData->RbPciBar + Offset;
- }
- else if(EfiPciAddress->Bus == PrivateData->BusBase + 1)
- {
- if (!PcieIsLinkUp(PrivateData->SocType,PrivateData->RbPciBar, PrivateData->Port))
- {
- SetMem (Buffer, mOutStride[Width] * Count, 0xFF);
- return EFI_NOT_READY;
- }
- Address = GetPcieCfgAddress (
- PrivateData->Ecam,
- EfiPciAddress->Bus,
- EfiPciAddress->Device,
- EfiPciAddress->Function,
- Offset
- );
- }
- else
- {
- Address = GetPcieCfgAddress (
- PrivateData->Ecam,
- EfiPciAddress->Bus,
- EfiPciAddress->Device,
- EfiPciAddress->Function,
- Offset
- );
- }
-
- (VOID)CpuMemoryServiceRead((EFI_CPU_IO_PROTOCOL_WIDTH)Width, Address, Count, Buffer);
- PCIE_DEBUG ("[%a:%d] - %x\n", __FUNCTION__, __LINE__, *(UINT32 *)Buffer);
-
- return EFI_SUCCESS;
-}
-
-/**
- Writes memory-mapped registers.
- @param[in] Width Signifies the width of the I/O or Memory operation.
- @param[in] Address The base address of the I/O operation.
- @param[in] Count The number of I/O operations to perform. The number of
- bytes moved is Width size * Count, starting at Address.
- @param[in] Buffer For read operations, the destination buffer to store the results.
- For write operations, the source buffer from which to write data.
-
- @retval EFI_SUCCESS The data was read from or written to the PI system.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.
- @retval EFI_INVALID_PARAMETER Buffer is NULL.
- @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.
- @retval EFI_UNSUPPORTED The address range specified by Address, Width,
- and Count is not valid for this PI system.
-
-**/
-EFI_STATUS
-CpuMemoryServiceWrite (
- IN EFI_CPU_IO_PROTOCOL_WIDTH Width,
- IN UINT64 Address,
- IN UINTN Count,
- IN VOID *Buffer
- )
-{
- UINT8 InStride;
- UINT8 OutStride;
- EFI_CPU_IO_PROTOCOL_WIDTH OperationWidth;
- UINT8 *Uint8Buffer;
- UINT32 Uint32Buffer;
-
- //
- // Select loop based on the width of the transfer
- //
- InStride = mInStride[Width];
- OutStride = mOutStride[Width];
- OperationWidth = (EFI_CPU_IO_PROTOCOL_WIDTH) (Width & 0x03);
- for (Uint8Buffer = Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) {
- if (OperationWidth == EfiCpuIoWidthUint8) {
- Uint32Buffer = MmioRead32 ((UINTN)(Address & (~0x03)));
- Uint32Buffer &= ~(UINT32)(0xFF << ((Address & 0x3) * 8));
- Uint32Buffer |= (UINT32)(*(UINT8 *)Uint8Buffer) << ((Address & 0x3) * 8);
- MmioWrite32 ((UINTN)(Address & (~0x03)), Uint32Buffer);
- } else if (OperationWidth == EfiCpuIoWidthUint16) {
- if (((Address & 0x3) == 1) || ((Address & 0x3) == 3)) {
- return EFI_INVALID_PARAMETER;
- }
- Uint32Buffer = MmioRead32 ((UINTN)(Address & (~0x03)));
- Uint32Buffer &= ~(UINT32)(0xFFFF << ((Address & 0x3) * 8));
- Uint32Buffer |= (UINT32)(*(UINT16 *)Uint8Buffer) << ((Address & 0x3) * 8);
- MmioWrite32 ((UINTN)(Address & (~0x03)), Uint32Buffer);
- } else if (OperationWidth == EfiCpuIoWidthUint32) {
- MmioWrite32 ((UINTN)Address, *((UINT32 *)Uint8Buffer));
- } else if (OperationWidth == EfiCpuIoWidthUint64) {
- MmioWrite64 ((UINTN)Address, *((UINT64 *)Uint8Buffer));
- }
- }
- return EFI_SUCCESS;
-}
-
-/**
- Enables a PCI driver to access PCI controller registers in a PCI root bridge's configuration space.
-
- The Pci.Read() and Pci.Write() functions enable a driver to access PCI configuration
- registers for a PCI controller.
- The PCI Configuration operations are carried out exactly as requested. The caller is responsible for
- any alignment and PCI configuration width issues that a PCI Root Bridge on a platform might
- require.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Width Signifies the width of the memory operations.
- @param[in] Address The address within the PCI configuration space for the PCI controller.
- @param[in] Count The number of PCI configuration operations to perform. Bytes
- moved is Width size * Count, starting at Address.
- @param[in] Buffer For read operations, the destination buffer to store the results. For
- write operations, the source buffer to write data from.
-
- @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
- @retval EFI_INVALID_PARAMETER Buffer is NULL.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoPciWrite (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 EfiAddress,
- IN UINTN Count,
- IN VOID *Buffer
- )
-{
- UINT32 Offset;
- EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS *EfiPciAddress;
- UINT64 Address;
- PCI_ROOT_BRIDGE_INSTANCE *PrivateData;
-
- EfiPciAddress = (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS *)&EfiAddress;
- PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS(This);
-
- if (Buffer == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- if (Width >= EfiPciWidthMaximum) {
- return EFI_INVALID_PARAMETER;
- }
-
- if (EfiPciAddress->ExtendedRegister)
- Offset = EfiPciAddress->ExtendedRegister;
- else
- Offset = EfiPciAddress->Register;
-
- PCIE_DEBUG ("[%a:%d] - bus %x dev %x func %x Off %x\n", __FUNCTION__, __LINE__,
- EfiPciAddress->Bus,
- EfiPciAddress->Device,
- EfiPciAddress->Function,
- Offset
- );
- if (((EfiPciAddress->Bus == PrivateData->BusBase) && (EfiPciAddress->Device == 0x00) && (EfiPciAddress->Function == 0))){
- Address = PrivateData->RbPciBar + Offset;
- if ((Offset == 0x14) || (Offset == 0x10)) {
- return EFI_SUCCESS;
- }
- }
- else if (EfiPciAddress->Bus == PrivateData->BusBase + 1)
- {
- if (!PcieIsLinkUp(PrivateData->SocType,PrivateData->RbPciBar, PrivateData->Port)) {
- return EFI_NOT_READY;
- }
- Address = GetPcieCfgAddress (
- PrivateData->Ecam,
- EfiPciAddress->Bus,
- EfiPciAddress->Device,
- EfiPciAddress->Function,
- Offset
- );
- }
- else
- {
- Address = GetPcieCfgAddress (
- PrivateData->Ecam,
- EfiPciAddress->Bus,
- EfiPciAddress->Device,
- EfiPciAddress->Function,
- Offset
- );
- }
-
- (VOID)CpuMemoryServiceWrite ((EFI_CPU_IO_PROTOCOL_WIDTH)Width, Address, Count, Buffer);
- PCIE_DEBUG ("[%a:%d] - 0x%08x\n", __FUNCTION__, __LINE__, *(UINT32 *)Buffer);
- return EFI_SUCCESS;
-}
-
-/**
- Provides the PCI controller-specific addresses required to access system memory from a
- DMA bus master.
-
- The Map() function provides the PCI controller specific addresses needed to access system
- memory. This function is used to map system memory for PCI bus master DMA accesses.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Operation Indicates if the bus master is going to read or write to system memory.
- @param[in] HostAddress The system memory address to map to the PCI controller.
- @param[in, out] NumberOfBytes On input the number of bytes to map. On output the number of bytes that were mapped.
- @param[out] DeviceAddress The resulting map address for the bus master PCI controller to use
- to access the system memory's HostAddress.
- @param[out] Mapping The value to pass to Unmap() when the bus master DMA operation is complete.
-
- @retval EFI_SUCCESS The range was mapped for the returned NumberOfBytes.
- @retval EFI_INVALID_PARAMETER Operation is invalid.
- @retval EFI_INVALID_PARAMETER HostAddress is NULL.
- @retval EFI_INVALID_PARAMETER NumberOfBytes is NULL.
- @retval EFI_INVALID_PARAMETER DeviceAddress is NULL.
- @retval EFI_INVALID_PARAMETER Mapping is NULL.
- @retval EFI_UNSUPPORTED The HostAddress cannot be mapped as a common buffer.
- @retval EFI_DEVICE_ERROR The system hardware could not map the requested address.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoMap (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_OPERATION Operation,
- IN VOID *HostAddress,
- IN OUT UINTN *NumberOfBytes,
- OUT EFI_PHYSICAL_ADDRESS *DeviceAddress,
- OUT VOID **Mapping
- )
-{
- DMA_MAP_OPERATION DmaOperation;
-
- if (Operation == EfiPciOperationBusMasterRead) {
- DmaOperation = MapOperationBusMasterRead;
- } else if (Operation == EfiPciOperationBusMasterWrite) {
- DmaOperation = MapOperationBusMasterWrite;
- } else if (Operation == EfiPciOperationBusMasterCommonBuffer) {
- DmaOperation = MapOperationBusMasterCommonBuffer;
- } else if (Operation == EfiPciOperationBusMasterRead64) {
- DmaOperation = MapOperationBusMasterRead;
- } else if (Operation == EfiPciOperationBusMasterWrite64) {
- DmaOperation = MapOperationBusMasterWrite;
- } else if (Operation == EfiPciOperationBusMasterCommonBuffer64) {
- DmaOperation = MapOperationBusMasterCommonBuffer;
- } else {
- return EFI_INVALID_PARAMETER;
- }
- (VOID)DmaMap (DmaOperation, HostAddress, NumberOfBytes, DeviceAddress, Mapping);
- return EFI_SUCCESS;
-}
-
-/**
- Completes the Map() operation and releases any corresponding resources.
-
- The Unmap() function completes the Map() operation and releases any corresponding resources.
- If the operation was an EfiPciOperationBusMasterWrite or
- EfiPciOperationBusMasterWrite64, the data is committed to the target system memory.
- Any resources used for the mapping are freed.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Mapping The mapping value returned from Map().
-
- @retval EFI_SUCCESS The range was unmapped.
- @retval EFI_INVALID_PARAMETER Mapping is not a value that was returned by Map().
- @retval EFI_DEVICE_ERROR The data was not committed to the target system memory.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoUnmap (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN VOID *Mapping
- )
-{
- return DmaUnmap (Mapping);
-}
-
-/**
- Allocates pages that are suitable for an EfiPciOperationBusMasterCommonBuffer or
- EfiPciOperationBusMasterCommonBuffer64 mapping.
-
- @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param Type This parameter is not used and must be ignored.
- @param MemoryType The type of memory to allocate, EfiBootServicesData or EfiRuntimeServicesData.
- @param Pages The number of pages to allocate.
- @param HostAddress A pointer to store the base system memory address of the allocated range.
- @param Attributes The requested bit mask of attributes for the allocated range. Only
- the attributes EFI_PCI_ATTRIBUTE_MEMORY_WRITE_COMBINE, EFI_PCI_ATTRIBUTE_MEMORY_CACHED,
- and EFI_PCI_ATTRIBUTE_DUAL_ADDRESS_CYCLE may be used with this function.
-
- @retval EFI_SUCCESS The requested memory pages were allocated.
- @retval EFI_INVALID_PARAMETER MemoryType is invalid.
- @retval EFI_INVALID_PARAMETER HostAddress is NULL.
- @retval EFI_UNSUPPORTED Attributes is unsupported. The only legal attribute bits are
- MEMORY_WRITE_COMBINE, MEMORY_CACHED, and DUAL_ADDRESS_CYCLE.
- @retval EFI_OUT_OF_RESOURCES The memory pages could not be allocated.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoAllocateBuffer (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_ALLOCATE_TYPE Type,
- IN EFI_MEMORY_TYPE MemoryType,
- IN UINTN Pages,
- OUT VOID **HostAddress,
- IN UINT64 Attributes
- )
-{
- if (Attributes & EFI_PCI_ATTRIBUTE_INVALID_FOR_ALLOCATE_BUFFER) {
- return EFI_UNSUPPORTED;
- }
-
- return DmaAllocateBuffer (MemoryType, Pages, HostAddress);
-
-}
-
-/**
- Frees memory that was allocated with AllocateBuffer().
-
- The FreeBuffer() function frees memory that was allocated with AllocateBuffer().
-
- @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param Pages The number of pages to free.
- @param HostAddress The base system memory address of the allocated range.
-
- @retval EFI_SUCCESS The requested memory pages were freed.
- @retval EFI_INVALID_PARAMETER The memory range specified by HostAddress and Pages
- was not allocated with AllocateBuffer().
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoFreeBuffer (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN UINTN Pages,
- OUT VOID *HostAddress
- )
-{
- return DmaFreeBuffer (Pages, HostAddress);
-}
-
-/**
- Flushes all PCI posted write transactions from a PCI host bridge to system memory.
-
- The Flush() function flushes any PCI posted write transactions from a PCI host bridge to system
- memory. Posted write transactions are generated by PCI bus masters when they perform write
- transactions to target addresses in system memory.
- This function does not flush posted write transactions from any PCI bridges. A PCI controller
- specific action must be taken to guarantee that the posted write transactions have been flushed from
- the PCI controller and from all the PCI bridges into the PCI host bridge. This is typically done with
- a PCI read transaction from the PCI controller prior to calling Flush().
-
- @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
-
- @retval EFI_SUCCESS The PCI posted write transactions were flushed from the PCI host
- bridge to system memory.
- @retval EFI_DEVICE_ERROR The PCI posted write transactions were not flushed from the PCI
- host bridge due to a hardware error.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoFlush (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This
- )
-{
- //
- // not supported yet
- //
- return EFI_SUCCESS;
-}
-
-/**
- Gets the attributes that a PCI root bridge supports setting with SetAttributes(), and the
- attributes that a PCI root bridge is currently using.
-
- The GetAttributes() function returns the mask of attributes that this PCI root bridge supports
- and the mask of attributes that the PCI root bridge is currently using.
-
- @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param Supported A pointer to the mask of attributes that this PCI root bridge
- supports setting with SetAttributes().
- @param Attributes A pointer to the mask of attributes that this PCI root bridge is
- currently using.
-
- @retval EFI_SUCCESS If Supports is not NULL, then the attributes that the PCI root
- bridge supports is returned in Supports. If Attributes is
- not NULL, then the attributes that the PCI root bridge is currently
- using is returned in Attributes.
- @retval EFI_INVALID_PARAMETER Both Supports and Attributes are NULL.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoGetAttributes (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- OUT UINT64 *Supported,
- OUT UINT64 *Attributes
- )
-{
- PCI_ROOT_BRIDGE_INSTANCE *PrivateData;
-
- PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS(This);
-
- if (Attributes == NULL && Supported == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // Set the return value for Supported and Attributes
- //
- if (Supported != NULL) {
- *Supported = PrivateData->Supports;
- }
-
- if (Attributes != NULL) {
- *Attributes = PrivateData->Attributes;
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- Sets attributes for a resource range on a PCI root bridge.
-
- The SetAttributes() function sets the attributes specified in Attributes for the PCI root
- bridge on the resource range specified by ResourceBase and ResourceLength. Since the
- granularity of setting these attributes may vary from resource type to resource type, and from
- platform to platform, the actual resource range and the one passed in by the caller may differ. As a
- result, this function may set the attributes specified by Attributes on a larger resource range
- than the caller requested. The actual range is returned in ResourceBase and
- ResourceLength. The caller is responsible for verifying that the actual range for which the
- attributes were set is acceptable.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Attributes The mask of attributes to set. If the attribute bit
- MEMORY_WRITE_COMBINE, MEMORY_CACHED, or
- MEMORY_DISABLE is set, then the resource range is specified by
- ResourceBase and ResourceLength. If
- MEMORY_WRITE_COMBINE, MEMORY_CACHED, and
- MEMORY_DISABLE are not set, then ResourceBase and
- ResourceLength are ignored, and may be NULL.
- @param[in, out] ResourceBase A pointer to the base address of the resource range to be modified
- by the attributes specified by Attributes.
- @param[in, out] ResourceLength A pointer to the length of the resource range to be modified by the
- attributes specified by Attributes.
-
- @retval EFI_SUCCESS The current configuration of this PCI root bridge was returned in Resources.
- @retval EFI_UNSUPPORTED The current configuration of this PCI root bridge could not be retrieved.
- @retval EFI_INVALID_PARAMETER Invalid pointer of EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoSetAttributes (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN UINT64 Attributes,
- IN OUT UINT64 *ResourceBase,
- IN OUT UINT64 *ResourceLength
- )
-{
- PCI_ROOT_BRIDGE_INSTANCE *PrivateData;
-
- PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS(This);
-
- if (Attributes != 0) {
- if ((Attributes & (~(PrivateData->Supports))) != 0) {
- return EFI_UNSUPPORTED;
- }
- }
-
- //
- // This is a generic driver for a PC-AT class system. It does not have any
- // chipset specific knowlegde, so none of the attributes can be set or
- // cleared. Any attempt to set attribute that are already set will succeed,
- // and any attempt to set an attribute that is not supported will fail.
- //
- if (Attributes & (~PrivateData->Attributes)) {
- /* FIXME: */
- return EFI_UNSUPPORTED;
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- Retrieves the current resource settings of this PCI root bridge in the form of a set of ACPI 2.0
- resource descriptors.
-
- There are only two resource descriptor types from the ACPI Specification that may be used to
- describe the current resources allocated to a PCI root bridge. These are the QWORD Address
- Space Descriptor (ACPI 2.0 Section 6.4.3.5.1), and the End Tag (ACPI 2.0 Section 6.4.2.8). The
- QWORD Address Space Descriptor can describe memory, I/O, and bus number ranges for dynamic
- or fixed resources. The configuration of a PCI root bridge is described with one or more QWORD
- Address Space Descriptors followed by an End Tag.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[out] Resources A pointer to the ACPI 2.0 resource descriptors that describe the
- current configuration of this PCI root bridge. The storage for the
- ACPI 2.0 resource descriptors is allocated by this function. The
- caller must treat the return buffer as read-only data, and the buffer
- must not be freed by the caller.
-
- @retval EFI_SUCCESS The current configuration of this PCI root bridge was returned in Resources.
- @retval EFI_UNSUPPORTED The current configuration of this PCI root bridge could not be retrieved.
- @retval EFI_INVALID_PARAMETER Invalid pointer of EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoConfiguration (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- OUT VOID **Resources
- )
-{
- PCI_ROOT_BRIDGE_INSTANCE *PrivateData;
- UINTN Index;
-
- PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS (This);
- for (Index = 0; Index < TypeMax; Index++) {
- if (PrivateData->ResAllocNode[Index].Status == ResAllocated) {
- switch (Index) {
- case TypeIo:
- Configuration.SpaceDesp[Index].AddrRangeMin = PrivateData->IoBase;
- break;
- case TypeBus:
- Configuration.SpaceDesp[Index].AddrRangeMin = PrivateData->ResAllocNode[Index].Base;
- break;
- default:
- /* PCIE Device bar address should be base on PciRegionBase */
- Configuration.SpaceDesp[Index].AddrRangeMin = PrivateData->ResAllocNode[Index].Base - PrivateData->MemBase +
- PrivateData->PciRegionBase;
- }
- Configuration.SpaceDesp[Index].AddrRangeMax = Configuration.SpaceDesp[Index].AddrRangeMin + PrivateData->ResAllocNode[Index].Length - 1;
- Configuration.SpaceDesp[Index].AddrLen = PrivateData->ResAllocNode[Index].Length;
- Configuration.SpaceDesp[Index].AddrTranslationOffset = PrivateData->MemBase - PrivateData->PciRegionBase;
- }
- }
-
- *Resources = &Configuration;
- return EFI_SUCCESS;
-}
-