@@ -123,7 +123,17 @@ static int sprd_adi_fifo_is_full(struct sprd_adi *sadi)
static int sprd_adi_read(struct sprd_adi *sadi, u32 reg_paddr, u32 *read_val)
{
int read_timeout = ADI_READ_TIMEOUT;
+ unsigned long flags;
u32 val, rd_addr;
+ int ret;
+
+ ret = hwspin_lock_timeout_irqsave(sadi->hwlock,
+ ADI_HWSPINLOCK_TIMEOUT,
+ &flags);
+ if (ret) {
+ dev_err(sadi->dev, "get the hw lock failed\n");
+ return ret;
+ }
/*
* Set the physical register address need to read into RD_CMD register,
@@ -147,7 +157,8 @@ static int sprd_adi_read(struct sprd_adi *sadi, u32 reg_paddr, u32 *read_val)
if (read_timeout == 0) {
dev_err(sadi->dev, "ADI read timeout\n");
- return -EBUSY;
+ ret = -EBUSY;
+ goto out;
}
/*
@@ -161,21 +172,35 @@ static int sprd_adi_read(struct sprd_adi *sadi, u32 reg_paddr, u32 *read_val)
if (rd_addr != (reg_paddr & REG_ADDR_LOW_MASK)) {
dev_err(sadi->dev, "read error, reg addr = 0x%x, val = 0x%x\n",
reg_paddr, val);
- return -EIO;
+ ret = -EIO;
+ goto out;
}
*read_val = val & RD_VALUE_MASK;
- return 0;
+
+out:
+ hwspin_unlock_irqrestore(sadi->hwlock, &flags);
+ return ret;
}
-static int sprd_adi_write(struct sprd_adi *sadi, unsigned long reg, u32 val)
+static int sprd_adi_write(struct sprd_adi *sadi, u32 reg_paddr, u32 val)
{
+ unsigned long reg = sprd_adi_to_vaddr(sadi, reg_paddr);
u32 timeout = ADI_FIFO_DRAIN_TIMEOUT;
+ unsigned long flags;
int ret;
+ ret = hwspin_lock_timeout_irqsave(sadi->hwlock,
+ ADI_HWSPINLOCK_TIMEOUT,
+ &flags);
+ if (ret) {
+ dev_err(sadi->dev, "get the hw lock failed\n");
+ return ret;
+ }
+
ret = sprd_adi_drain_fifo(sadi);
if (ret < 0)
- return ret;
+ goto out;
/*
* we should wait for write fifo is empty before writing data to PMIC
@@ -192,10 +217,12 @@ static int sprd_adi_write(struct sprd_adi *sadi, unsigned long reg, u32 val)
if (timeout == 0) {
dev_err(sadi->dev, "write fifo is full\n");
- return -EBUSY;
+ ret = -EBUSY;
}
- return 0;
+out:
+ hwspin_unlock_irqrestore(sadi->hwlock, &flags);
+ return ret;
}
static int sprd_adi_transfer_one(struct spi_controller *ctlr,
@@ -203,7 +230,6 @@ static int sprd_adi_transfer_one(struct spi_controller *ctlr,
struct spi_transfer *t)
{
struct sprd_adi *sadi = spi_controller_get_devdata(ctlr);
- unsigned long flags, virt_reg;
u32 phy_reg, val;
int ret;
@@ -214,16 +240,7 @@ static int sprd_adi_transfer_one(struct spi_controller *ctlr,
if (ret)
return ret;
- ret = hwspin_lock_timeout_irqsave(sadi->hwlock,
- ADI_HWSPINLOCK_TIMEOUT,
- &flags);
- if (ret) {
- dev_err(sadi->dev, "get the hw lock failed\n");
- return ret;
- }
-
ret = sprd_adi_read(sadi, phy_reg, &val);
- hwspin_unlock_irqrestore(sadi->hwlock, &flags);
if (ret)
return ret;
@@ -241,19 +258,8 @@ static int sprd_adi_transfer_one(struct spi_controller *ctlr,
if (ret)
return ret;
- virt_reg = sprd_adi_to_vaddr(sadi, phy_reg);
val = *p;
-
- ret = hwspin_lock_timeout_irqsave(sadi->hwlock,
- ADI_HWSPINLOCK_TIMEOUT,
- &flags);
- if (ret) {
- dev_err(sadi->dev, "get the hw lock failed\n");
- return ret;
- }
-
- ret = sprd_adi_write(sadi, virt_reg, val);
- hwspin_unlock_irqrestore(sadi->hwlock, &flags);
+ ret = sprd_adi_write(sadi, phy_reg, val);
if (ret)
return ret;
} else {
We can move the hardware spinlock protection into the ADI read/write functions to simplify the sprd_adi_transfer_one() function. Moreover this optimization can also help to access PMIC without considering the hardware spinlock using sprd_adi_read/write() functions. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> --- drivers/spi/spi-sprd-adi.c | 64 ++++++++++++++++++++++++-------------------- 1 file changed, 35 insertions(+), 29 deletions(-) -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html