| Message ID | 20180222162822.22703-2-ard.biesheuvel@linaro.org |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Create UART DebugLib implementation for runtime drivers | expand |
On 22 February 2018 at 16:28, Ard Biesheuvel <ard.biesheuvel@linaro.org> wrote: > Introduce a variant of BaseDebugLibSerialPort that behaves correctly with > regards to the use of the serial port after ExitBootServices(). Also, it > caches PCD values in the constructor so that no calls into PcdLib are > made at runtime. > Actually (and perhaps this is what Mike was trying to point out to me), the PCDs in question only exist as fixed or patchable in the first place, so caching them is pointless. I will respin with that part removed. > Contributed-under: TianoCore Contribution Agreement 1.1 > Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> > --- > MdePkg/Library/DxeRuntimeDebugLibSerialPort/DebugLib.c | 373 ++++++++++++++++++++ > MdePkg/Library/DxeRuntimeDebugLibSerialPort/DxeRuntimeDebugLibSerialPort.inf | 56 +++ > MdePkg/Library/DxeRuntimeDebugLibSerialPort/DxeRuntimeDebugLibSerialPort.uni | 21 ++ > 3 files changed, 450 insertions(+) > > diff --git a/MdePkg/Library/DxeRuntimeDebugLibSerialPort/DebugLib.c b/MdePkg/Library/DxeRuntimeDebugLibSerialPort/DebugLib.c > new file mode 100644 > index 000000000000..8579469029a1 > --- /dev/null > +++ b/MdePkg/Library/DxeRuntimeDebugLibSerialPort/DebugLib.c > @@ -0,0 +1,373 @@ > +/** @file > + DXE runtime Debug library instance based on Serial Port library. > + It takes care not to call into SerialPortLib or PcdLib after > + ExitBootServices() has been called, to prevent touching hardware that is > + no longer owned by the firmware, or invoking protocols that are not safe > + for runtime (such as gEfiPcdProtocolGuid) > + > + Copyright (c) 2006 - 2011, Intel Corporation. All rights reserved.<BR> > + Copyright (c) 2018, Linaro, Ltd. All rights reserved.<BR> > + > + This program and the accompanying materials > + are licensed and made available under the terms and conditions of the BSD License > + which accompanies this distribution. The full text of the license may be found at > + http://opensource.org/licenses/bsd-license.php. > + > + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, > + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. > + > +**/ > + > +#include <Base.h> > +#include <Library/DebugLib.h> > +#include <Library/DebugPrintErrorLevelLib.h> > +#include <Library/BaseLib.h> > +#include <Library/PrintLib.h> > +#include <Library/PcdLib.h> > +#include <Library/BaseMemoryLib.h> > +#include <Library/SerialPortLib.h> > + > +STATIC EFI_EVENT mEfiExitBootServicesEvent; > +STATIC BOOLEAN mEfiAtRuntime; > + > +STATIC UINT8 mDebugClearMemoryValue; > +STATIC UINT8 mDebugPropertyMask; > +STATIC UINT32 mFixedDebugPrintErrorLevel; > + > +// > +// Define the maximum debug and assert message length that this library supports > +// > +#define MAX_DEBUG_MESSAGE_LENGTH 0x100 > + > +/** > + Set AtRuntime flag as TRUE after ExitBootServices. > + > + @param[in] Event The Event that is being processed. > + @param[in] Context The Event Context. > + > +**/ > +STATIC > +VOID > +EFIAPI > +ExitBootServicesEvent ( > + IN EFI_EVENT Event, > + IN VOID *Context > + ) > +{ > + mEfiAtRuntime = TRUE; > +} > + > +/** > + The constructor function to initialize the Serial Port library and > + register a callback for the ExitBootServices event. > + > + @param[in] ImageHandle The firmware allocated handle for the EFI image. > + @param[in] SystemTable A pointer to the EFI System Table. > + > + @retval EFI_SUCCESS The operation completed successfully. > + @retval other Either the serial port failed to initialize or the > + ExitBootServices event callback registration failed. > +**/ > +EFI_STATUS > +EFIAPI > +DxeRuntimeDebugLibSerialPortConstructor ( > + IN EFI_HANDLE ImageHandle, > + IN EFI_SYSTEM_TABLE *SystemTable > + ) > +{ > + EFI_STATUS Status; > + > + mDebugClearMemoryValue = PcdGet8 (PcdDebugClearMemoryValue); > + mDebugPropertyMask = PcdGet8 (PcdDebugPropertyMask); > + mFixedDebugPrintErrorLevel = PcdGet32 (PcdFixedDebugPrintErrorLevel); > + > + Status = SerialPortInitialize (); > + if (EFI_ERROR (Status)) { > + return Status; > + } > + > + return SystemTable->BootServices->CreateEventEx (EVT_NOTIFY_SIGNAL, > + TPL_NOTIFY, ExitBootServicesEvent, NULL, > + &gEfiEventExitBootServicesGuid, > + &mEfiExitBootServicesEvent); > +} > + > +/** > + If a runtime driver exits with an error, it must call this routine > + to free the allocated resource before the exiting. > + > + @param[in] ImageHandle The firmware allocated handle for the EFI image. > + @param[in] SystemTable A pointer to the EFI System Table. > + > + @retval EFI_SUCCESS The Runtime Driver Lib shutdown successfully. > + @retval EFI_UNSUPPORTED Runtime Driver lib was not initialized. > +**/ > +EFI_STATUS > +EFIAPI > +DxeRuntimeDebugLibSerialPortDestructor ( > + IN EFI_HANDLE ImageHandle, > + IN EFI_SYSTEM_TABLE *SystemTable > + ) > +{ > + return SystemTable->BootServices->CloseEvent (mEfiExitBootServicesEvent); > +} > + > +/** > + Prints a debug message to the debug output device if the specified error level > + is enabled. > + > + If any bit in ErrorLevel is also set in DebugPrintErrorLevelLib function > + GetDebugPrintErrorLevel (), then print the message specified by Format and the > + associated variable argument list to the debug output device. > + > + If Format is NULL, then ASSERT(). > + > + @param ErrorLevel The error level of the debug message. > + @param Format Format string for the debug message to print. > + @param ... Variable argument list whose contents are accessed > + based on the format string specified by Format. > + > +**/ > +VOID > +EFIAPI > +DebugPrint ( > + IN UINTN ErrorLevel, > + IN CONST CHAR8 *Format, > + ... > + ) > +{ > + CHAR8 Buffer[MAX_DEBUG_MESSAGE_LENGTH]; > + VA_LIST Marker; > + > + if (mEfiAtRuntime) { > + return; > + } > + > + ASSERT (Format != NULL); > + > + // > + // Check driver debug mask value and global mask > + // > + if ((ErrorLevel & GetDebugPrintErrorLevel ()) == 0) { > + return; > + } > + > + // > + // Convert the DEBUG() message to an ASCII String > + // > + VA_START (Marker, Format); > + AsciiVSPrint (Buffer, sizeof (Buffer), Format, Marker); > + VA_END (Marker); > + > + // > + // Send the print string to a Serial Port > + // > + SerialPortWrite ((UINT8 *)Buffer, AsciiStrLen (Buffer)); > +} > + > + > +/** > + Prints an assert message containing a filename, line number, and description. > + This may be followed by a breakpoint or a dead loop. > + > + Print a message of the form "ASSERT <FileName>(<LineNumber>): <Description>\n" > + to the debug output device. If DEBUG_PROPERTY_ASSERT_BREAKPOINT_ENABLED bit > + of PcdDebugProperyMask is set then CpuBreakpoint() is called. Otherwise, if > + DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED bit of PcdDebugProperyMask is set then > + CpuDeadLoop() is called. If neither of these bits are set, then this function > + returns immediately after the message is printed to the debug output device. > + DebugAssert() must actively prevent recursion. If DebugAssert() is called > + while processing another DebugAssert(), then DebugAssert() must return > + immediately. > + > + If FileName is NULL, then a <FileName> string of "(NULL) Filename" is printed. > + If Description is NULL, then a <Description> string of "(NULL) Description" is > + printed. > + > + @param FileName The pointer to the name of the source file that generated > + the assert condition. > + @param LineNumber The line number in the source file that generated the > + assert condition > + @param Description The pointer to the description of the assert condition. > + > +**/ > +VOID > +EFIAPI > +DebugAssert ( > + IN CONST CHAR8 *FileName, > + IN UINTN LineNumber, > + IN CONST CHAR8 *Description > + ) > +{ > + CHAR8 Buffer[MAX_DEBUG_MESSAGE_LENGTH]; > + > + if (!mEfiAtRuntime) { > + // > + // Generate the ASSERT() message in Ascii format > + // > + AsciiSPrint (Buffer, sizeof (Buffer), "ASSERT [%a] %a(%d): %a\n", > + gEfiCallerBaseName, FileName, LineNumber, Description); > + > + // > + // Send the print string to the Console Output device > + // > + SerialPortWrite ((UINT8 *)Buffer, AsciiStrLen (Buffer)); > + } > + > + // > + // Generate a Breakpoint, DeadLoop, or NOP based on PCD settings > + // > + if ((mDebugPropertyMask & DEBUG_PROPERTY_ASSERT_BREAKPOINT_ENABLED) != 0) { > + CpuBreakpoint (); > + } else if ((mDebugPropertyMask & > + DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED) != 0) { > + CpuDeadLoop (); > + } > +} > + > + > +/** > + Fills a target buffer with PcdDebugClearMemoryValue, and returns the target > + buffer. > + > + This function fills Length bytes of Buffer with the value specified by > + PcdDebugClearMemoryValue, and returns Buffer. > + > + If Buffer is NULL, then ASSERT(). > + If Length is greater than (MAX_ADDRESS - Buffer + 1), then ASSERT(). > + > + @param Buffer The pointer to the target buffer to be filled with > + PcdDebugClearMemoryValue. > + @param Length The number of bytes in Buffer to fill with > + PcdDebugClearMemoryValue. > + > + @return Buffer The pointer to the target buffer filled with > + PcdDebugClearMemoryValue. > + > +**/ > +VOID * > +EFIAPI > +DebugClearMemory ( > + OUT VOID *Buffer, > + IN UINTN Length > + ) > +{ > + if (!mEfiAtRuntime) { > + ASSERT (Buffer != NULL); > + ASSERT (Length <= (MAX_ADDRESS - (UINTN)Buffer + 1)); > + } > + > + return SetMem (Buffer, Length, mDebugClearMemoryValue); > +} > + > + > +/** > + Returns TRUE if ASSERT() macros are enabled. > + > + This function returns TRUE if the DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of > + PcdDebugProperyMask is set. Otherwise FALSE is returned. > + > + @retval TRUE The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of > + PcdDebugProperyMask is set. > + @retval FALSE The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of > + PcdDebugProperyMask is clear. > + > +**/ > +BOOLEAN > +EFIAPI > +DebugAssertEnabled ( > + VOID > + ) > +{ > + return (BOOLEAN)((mDebugPropertyMask & > + DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED) != 0); > +} > + > + > +/** > + Returns TRUE if DEBUG() macros are enabled. > + > + This function returns TRUE if the DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of > + PcdDebugProperyMask is set. Otherwise FALSE is returned. > + > + @retval TRUE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of > + PcdDebugProperyMask is set. > + @retval FALSE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of > + PcdDebugProperyMask is clear. > + > +**/ > +BOOLEAN > +EFIAPI > +DebugPrintEnabled ( > + VOID > + ) > +{ > + return (BOOLEAN)((mDebugPropertyMask & > + DEBUG_PROPERTY_DEBUG_PRINT_ENABLED) != 0); > +} > + > + > +/** > + Returns TRUE if DEBUG_CODE() macros are enabled. > + > + This function returns TRUE if the DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of > + PcdDebugProperyMask is set. Otherwise FALSE is returned. > + > + @retval TRUE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of > + PcdDebugProperyMask is set. > + @retval FALSE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of > + PcdDebugProperyMask is clear. > + > +**/ > +BOOLEAN > +EFIAPI > +DebugCodeEnabled ( > + VOID > + ) > +{ > + return (BOOLEAN)((mDebugPropertyMask & > + DEBUG_PROPERTY_DEBUG_CODE_ENABLED) != 0); > +} > + > + > +/** > + Returns TRUE if DEBUG_CLEAR_MEMORY() macro is enabled. > + > + This function returns TRUE if the DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of > + PcdDebugProperyMask is set. Otherwise FALSE is returned. > + > + @retval TRUE The DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of > + PcdDebugProperyMask is set. > + @retval FALSE The DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of > + PcdDebugProperyMask is clear. > + > +**/ > +BOOLEAN > +EFIAPI > +DebugClearMemoryEnabled ( > + VOID > + ) > +{ > + return (BOOLEAN)((mDebugPropertyMask & > + DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED) != 0); > +} > + > +/** > + Returns TRUE if any one of the bit is set both in ErrorLevel and > + PcdFixedDebugPrintErrorLevel. > + > + This function compares the bit mask of ErrorLevel and > + PcdFixedDebugPrintErrorLevel. > + > + @retval TRUE Current ErrorLevel is supported. > + @retval FALSE Current ErrorLevel is not supported. > + > +**/ > +BOOLEAN > +EFIAPI > +DebugPrintLevelEnabled ( > + IN CONST UINTN ErrorLevel > + ) > +{ > + return (BOOLEAN)((ErrorLevel & mFixedDebugPrintErrorLevel) != 0); > +} > diff --git a/MdePkg/Library/DxeRuntimeDebugLibSerialPort/DxeRuntimeDebugLibSerialPort.inf b/MdePkg/Library/DxeRuntimeDebugLibSerialPort/DxeRuntimeDebugLibSerialPort.inf > new file mode 100644 > index 000000000000..d5e9d3f8dee7 > --- /dev/null > +++ b/MdePkg/Library/DxeRuntimeDebugLibSerialPort/DxeRuntimeDebugLibSerialPort.inf > @@ -0,0 +1,56 @@ > +## @file > +# DXE runtime Debug library instance based on Serial Port library. > +# It takes care not to call into SerialPortLib or PcdLib after > +# ExitBootServices() has been called, to prevent touching hardware that is > +# no longer owned by the firmware, or invoking protocols that are not safe > +# for runtime (such as gEfiPcdProtocolGuid) > +# > +# Copyright (c) 2006 - 2015, Intel Corporation. All rights reserved.<BR> > +# Copyright (c) 2018, Linaro, Ltd. All rights reserved.<BR> > +# > +# This program and the accompanying materials > +# are licensed and made available under the terms and conditions of the BSD License > +# which accompanies this distribution. The full text of the license may be found at > +# http://opensource.org/licenses/bsd-license.php. > +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, > +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. > +# > +# > +## > + > +[Defines] > + INF_VERSION = 0x0001001A > + BASE_NAME = DxeRuntimeDebugLibSerialPort > + MODULE_UNI_FILE = DxeRuntimeDebugLibSerialPort.uni > + FILE_GUID = 9D914E2F-7CCB-41DB-8E74-9AFF8F3BBFBF > + MODULE_TYPE = DXE_RUNTIME_DRIVER > + VERSION_STRING = 1.0 > + LIBRARY_CLASS = DebugLib|DXE_RUNTIME_DRIVER > + CONSTRUCTOR = DxeRuntimeDebugLibSerialPortConstructor > + DESTRUCTOR = DxeRuntimeDebugLibSerialPortDestructor > + > +# > +# VALID_ARCHITECTURES = AARCH64 ARM IA32 X64 IPF EBC > +# > + > +[Sources] > + DebugLib.c > + > +[Packages] > + MdePkg/MdePkg.dec > + > +[LibraryClasses] > + BaseLib > + BaseMemoryLib > + DebugPrintErrorLevelLib > + PcdLib > + PrintLib > + SerialPortLib > + > +[Guids] > + gEfiEventExitBootServicesGuid ## CONSUMES ## Event > + > +[Pcd] > + gEfiMdePkgTokenSpaceGuid.PcdDebugClearMemoryValue ## CONSUMES > + gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask ## CONSUMES > + gEfiMdePkgTokenSpaceGuid.PcdFixedDebugPrintErrorLevel ## CONSUMES > diff --git a/MdePkg/Library/DxeRuntimeDebugLibSerialPort/DxeRuntimeDebugLibSerialPort.uni b/MdePkg/Library/DxeRuntimeDebugLibSerialPort/DxeRuntimeDebugLibSerialPort.uni > new file mode 100644 > index 000000000000..cd65515c4177 > --- /dev/null > +++ b/MdePkg/Library/DxeRuntimeDebugLibSerialPort/DxeRuntimeDebugLibSerialPort.uni > @@ -0,0 +1,21 @@ > +// /** @file > +// Instance of Debug Library based on Serial Port Library. > +// > +// It uses Print Library to produce formatted output strings to seiral port device. > +// > +// Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.<BR> > +// > +// This program and the accompanying materials > +// are licensed and made available under the terms and conditions of the BSD License > +// which accompanies this distribution. The full text of the license may be found at > +// http://opensource.org/licenses/bsd-license.php. > +// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, > +// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. > +// > +// **/ > + > + > +#string STR_MODULE_ABSTRACT #language en-US "Instance of Debug Library based on Serial Port Library" > + > +#string STR_MODULE_DESCRIPTION #language en-US "It uses Print Library to produce formatted output strings to a serial port device." > + > -- > 2.11.0 > _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel
Ard, The check for the runtime flag seems inconsistent. Since the issue being addressed is use of SerialPortLib, can't the mEfiAtRuntime flag be use around SerialPortLib calls only. Mike > -----Original Message----- > From: Ard Biesheuvel [mailto:ard.biesheuvel@linaro.org] > Sent: Thursday, February 22, 2018 8:28 AM > To: edk2-devel@lists.01.org > Cc: leif.lindholm@linaro.org; lersek@redhat.com; Gao, > Liming <liming.gao@intel.com>; Kinney, Michael D > <michael.d.kinney@intel.com>; afish@apple.com; Zeng, > Star <star.zeng@intel.com>; Ni, Ruiyu > <ruiyu.ni@intel.com>; Ard Biesheuvel > <ard.biesheuvel@linaro.org> > Subject: [PATCH edk2-platforms v2 1/2] MdePkg: introduce > DxeRuntimeDebugLibSerialPort > > Introduce a variant of BaseDebugLibSerialPort that > behaves correctly with > regards to the use of the serial port after > ExitBootServices(). Also, it > caches PCD values in the constructor so that no calls > into PcdLib are > made at runtime. > > Contributed-under: TianoCore Contribution Agreement 1.1 > Signed-off-by: Ard Biesheuvel > <ard.biesheuvel@linaro.org> > --- > MdePkg/Library/DxeRuntimeDebugLibSerialPort/DebugLib.c > | 373 ++++++++++++++++++++ > > MdePkg/Library/DxeRuntimeDebugLibSerialPort/DxeRuntimeDe > bugLibSerialPort.inf | 56 +++ > > MdePkg/Library/DxeRuntimeDebugLibSerialPort/DxeRuntimeDe > bugLibSerialPort.uni | 21 ++ > 3 files changed, 450 insertions(+) > > diff --git > a/MdePkg/Library/DxeRuntimeDebugLibSerialPort/DebugLib.c > b/MdePkg/Library/DxeRuntimeDebugLibSerialPort/DebugLib.c > new file mode 100644 > index 000000000000..8579469029a1 > --- /dev/null > +++ > b/MdePkg/Library/DxeRuntimeDebugLibSerialPort/DebugLib.c > @@ -0,0 +1,373 @@ > +/** @file > + DXE runtime Debug library instance based on Serial > Port library. > + It takes care not to call into SerialPortLib or > PcdLib after > + ExitBootServices() has been called, to prevent > touching hardware that is > + no longer owned by the firmware, or invoking > protocols that are not safe > + for runtime (such as gEfiPcdProtocolGuid) > + > + Copyright (c) 2006 - 2011, Intel Corporation. All > rights reserved.<BR> > + Copyright (c) 2018, Linaro, Ltd. All rights > reserved.<BR> > + > + This program and the accompanying materials > + are licensed and made available under the terms and > conditions of the BSD License > + which accompanies this distribution. The full text > of the license may be found at > + http://opensource.org/licenses/bsd-license.php. > + > + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON > AN "AS IS" BASIS, > + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, > EITHER EXPRESS OR IMPLIED. > + > +**/ > + > +#include <Base.h> > +#include <Library/DebugLib.h> > +#include <Library/DebugPrintErrorLevelLib.h> > +#include <Library/BaseLib.h> > +#include <Library/PrintLib.h> > +#include <Library/PcdLib.h> > +#include <Library/BaseMemoryLib.h> > +#include <Library/SerialPortLib.h> > + > +STATIC EFI_EVENT mEfiExitBootServicesEvent; > +STATIC BOOLEAN mEfiAtRuntime; > + > +STATIC UINT8 mDebugClearMemoryValue; > +STATIC UINT8 mDebugPropertyMask; > +STATIC UINT32 mFixedDebugPrintErrorLevel; > + > +// > +// Define the maximum debug and assert message length > that this library supports > +// > +#define MAX_DEBUG_MESSAGE_LENGTH 0x100 > + > +/** > + Set AtRuntime flag as TRUE after ExitBootServices. > + > + @param[in] Event The Event that is being > processed. > + @param[in] Context The Event Context. > + > +**/ > +STATIC > +VOID > +EFIAPI > +ExitBootServicesEvent ( > + IN EFI_EVENT Event, > + IN VOID *Context > + ) > +{ > + mEfiAtRuntime = TRUE; > +} > + > +/** > + The constructor function to initialize the Serial > Port library and > + register a callback for the ExitBootServices event. > + > + @param[in] ImageHandle The firmware allocated > handle for the EFI image. > + @param[in] SystemTable A pointer to the EFI System > Table. > + > + @retval EFI_SUCCESS The operation completed > successfully. > + @retval other Either the serial port failed > to initialize or the > + ExitBootServices event callback > registration failed. > +**/ > +EFI_STATUS > +EFIAPI > +DxeRuntimeDebugLibSerialPortConstructor ( > + IN EFI_HANDLE ImageHandle, > + IN EFI_SYSTEM_TABLE *SystemTable > + ) > +{ > + EFI_STATUS Status; > + > + mDebugClearMemoryValue = PcdGet8 > (PcdDebugClearMemoryValue); > + mDebugPropertyMask = PcdGet8 > (PcdDebugPropertyMask); > + mFixedDebugPrintErrorLevel = PcdGet32 > (PcdFixedDebugPrintErrorLevel); > + > + Status = SerialPortInitialize (); > + if (EFI_ERROR (Status)) { > + return Status; > + } > + > + return SystemTable->BootServices->CreateEventEx > (EVT_NOTIFY_SIGNAL, > + TPL_NOTIFY, > ExitBootServicesEvent, NULL, > + > &gEfiEventExitBootServicesGuid, > + > &mEfiExitBootServicesEvent); > +} > + > +/** > + If a runtime driver exits with an error, it must call > this routine > + to free the allocated resource before the exiting. > + > + @param[in] ImageHandle The firmware allocated > handle for the EFI image. > + @param[in] SystemTable A pointer to the EFI System > Table. > + > + @retval EFI_SUCCESS The Runtime Driver Lib > shutdown successfully. > + @retval EFI_UNSUPPORTED Runtime Driver lib was > not initialized. > +**/ > +EFI_STATUS > +EFIAPI > +DxeRuntimeDebugLibSerialPortDestructor ( > + IN EFI_HANDLE ImageHandle, > + IN EFI_SYSTEM_TABLE *SystemTable > + ) > +{ > + return SystemTable->BootServices->CloseEvent > (mEfiExitBootServicesEvent); > +} > + > +/** > + Prints a debug message to the debug output device if > the specified error level > + is enabled. > + > + If any bit in ErrorLevel is also set in > DebugPrintErrorLevelLib function > + GetDebugPrintErrorLevel (), then print the message > specified by Format and the > + associated variable argument list to the debug output > device. > + > + If Format is NULL, then ASSERT(). > + > + @param ErrorLevel The error level of the debug > message. > + @param Format Format string for the debug > message to print. > + @param ... Variable argument list whose > contents are accessed > + based on the format string > specified by Format. > + > +**/ > +VOID > +EFIAPI > +DebugPrint ( > + IN UINTN ErrorLevel, > + IN CONST CHAR8 *Format, > + ... > + ) > +{ > + CHAR8 Buffer[MAX_DEBUG_MESSAGE_LENGTH]; > + VA_LIST Marker; > + > + if (mEfiAtRuntime) { > + return; > + } > + > + ASSERT (Format != NULL); > + > + // > + // Check driver debug mask value and global mask > + // > + if ((ErrorLevel & GetDebugPrintErrorLevel ()) == 0) { > + return; > + } > + > + // > + // Convert the DEBUG() message to an ASCII String > + // > + VA_START (Marker, Format); > + AsciiVSPrint (Buffer, sizeof (Buffer), Format, > Marker); > + VA_END (Marker); > + > + // > + // Send the print string to a Serial Port > + // > + SerialPortWrite ((UINT8 *)Buffer, AsciiStrLen > (Buffer)); > +} > + > + > +/** > + Prints an assert message containing a filename, line > number, and description. > + This may be followed by a breakpoint or a dead loop. > + > + Print a message of the form "ASSERT > <FileName>(<LineNumber>): <Description>\n" > + to the debug output device. If > DEBUG_PROPERTY_ASSERT_BREAKPOINT_ENABLED bit > + of PcdDebugProperyMask is set then CpuBreakpoint() is > called. Otherwise, if > + DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED bit of > PcdDebugProperyMask is set then > + CpuDeadLoop() is called. If neither of these bits > are set, then this function > + returns immediately after the message is printed to > the debug output device. > + DebugAssert() must actively prevent recursion. If > DebugAssert() is called > + while processing another DebugAssert(), then > DebugAssert() must return > + immediately. > + > + If FileName is NULL, then a <FileName> string of > "(NULL) Filename" is printed. > + If Description is NULL, then a <Description> string > of "(NULL) Description" is > + printed. > + > + @param FileName The pointer to the name of the > source file that generated > + the assert condition. > + @param LineNumber The line number in the source > file that generated the > + assert condition > + @param Description The pointer to the description > of the assert condition. > + > +**/ > +VOID > +EFIAPI > +DebugAssert ( > + IN CONST CHAR8 *FileName, > + IN UINTN LineNumber, > + IN CONST CHAR8 *Description > + ) > +{ > + CHAR8 Buffer[MAX_DEBUG_MESSAGE_LENGTH]; > + > + if (!mEfiAtRuntime) { > + // > + // Generate the ASSERT() message in Ascii format > + // > + AsciiSPrint (Buffer, sizeof (Buffer), "ASSERT [%a] > %a(%d): %a\n", > + gEfiCallerBaseName, FileName, LineNumber, > Description); > + > + // > + // Send the print string to the Console Output > device > + // > + SerialPortWrite ((UINT8 *)Buffer, AsciiStrLen > (Buffer)); > + } > + > + // > + // Generate a Breakpoint, DeadLoop, or NOP based on > PCD settings > + // > + if ((mDebugPropertyMask & > DEBUG_PROPERTY_ASSERT_BREAKPOINT_ENABLED) != 0) { > + CpuBreakpoint (); > + } else if ((mDebugPropertyMask & > + DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED) > != 0) { > + CpuDeadLoop (); > + } > +} > + > + > +/** > + Fills a target buffer with PcdDebugClearMemoryValue, > and returns the target > + buffer. > + > + This function fills Length bytes of Buffer with the > value specified by > + PcdDebugClearMemoryValue, and returns Buffer. > + > + If Buffer is NULL, then ASSERT(). > + If Length is greater than (MAX_ADDRESS - Buffer + 1), > then ASSERT(). > + > + @param Buffer The pointer to the target buffer to > be filled with > + PcdDebugClearMemoryValue. > + @param Length The number of bytes in Buffer to > fill with > + PcdDebugClearMemoryValue. > + > + @return Buffer The pointer to the target buffer > filled with > + PcdDebugClearMemoryValue. > + > +**/ > +VOID * > +EFIAPI > +DebugClearMemory ( > + OUT VOID *Buffer, > + IN UINTN Length > + ) > +{ > + if (!mEfiAtRuntime) { > + ASSERT (Buffer != NULL); > + ASSERT (Length <= (MAX_ADDRESS - (UINTN)Buffer + > 1)); > + } > + > + return SetMem (Buffer, Length, > mDebugClearMemoryValue); > +} > + > + > +/** > + Returns TRUE if ASSERT() macros are enabled. > + > + This function returns TRUE if the > DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of > + PcdDebugProperyMask is set. Otherwise FALSE is > returned. > + > + @retval TRUE The > DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of > + PcdDebugProperyMask is set. > + @retval FALSE The > DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of > + PcdDebugProperyMask is clear. > + > +**/ > +BOOLEAN > +EFIAPI > +DebugAssertEnabled ( > + VOID > + ) > +{ > + return (BOOLEAN)((mDebugPropertyMask & > + > DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED) != 0); > +} > + > + > +/** > + Returns TRUE if DEBUG() macros are enabled. > + > + This function returns TRUE if the > DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of > + PcdDebugProperyMask is set. Otherwise FALSE is > returned. > + > + @retval TRUE The > DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of > + PcdDebugProperyMask is set. > + @retval FALSE The > DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of > + PcdDebugProperyMask is clear. > + > +**/ > +BOOLEAN > +EFIAPI > +DebugPrintEnabled ( > + VOID > + ) > +{ > + return (BOOLEAN)((mDebugPropertyMask & > + DEBUG_PROPERTY_DEBUG_PRINT_ENABLED) > != 0); > +} > + > + > +/** > + Returns TRUE if DEBUG_CODE() macros are enabled. > + > + This function returns TRUE if the > DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of > + PcdDebugProperyMask is set. Otherwise FALSE is > returned. > + > + @retval TRUE The > DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of > + PcdDebugProperyMask is set. > + @retval FALSE The > DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of > + PcdDebugProperyMask is clear. > + > +**/ > +BOOLEAN > +EFIAPI > +DebugCodeEnabled ( > + VOID > + ) > +{ > + return (BOOLEAN)((mDebugPropertyMask & > + DEBUG_PROPERTY_DEBUG_CODE_ENABLED) > != 0); > +} > + > + > +/** > + Returns TRUE if DEBUG_CLEAR_MEMORY() macro is > enabled. > + > + This function returns TRUE if the > DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of > + PcdDebugProperyMask is set. Otherwise FALSE is > returned. > + > + @retval TRUE The > DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of > + PcdDebugProperyMask is set. > + @retval FALSE The > DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of > + PcdDebugProperyMask is clear. > + > +**/ > +BOOLEAN > +EFIAPI > +DebugClearMemoryEnabled ( > + VOID > + ) > +{ > + return (BOOLEAN)((mDebugPropertyMask & > + > DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED) != 0); > +} > + > +/** > + Returns TRUE if any one of the bit is set both in > ErrorLevel and > + PcdFixedDebugPrintErrorLevel. > + > + This function compares the bit mask of ErrorLevel and > + PcdFixedDebugPrintErrorLevel. > + > + @retval TRUE Current ErrorLevel is supported. > + @retval FALSE Current ErrorLevel is not supported. > + > +**/ > +BOOLEAN > +EFIAPI > +DebugPrintLevelEnabled ( > + IN CONST UINTN ErrorLevel > + ) > +{ > + return (BOOLEAN)((ErrorLevel & > mFixedDebugPrintErrorLevel) != 0); > +} > diff --git > a/MdePkg/Library/DxeRuntimeDebugLibSerialPort/DxeRuntime > DebugLibSerialPort.inf > b/MdePkg/Library/DxeRuntimeDebugLibSerialPort/DxeRuntime > DebugLibSerialPort.inf > new file mode 100644 > index 000000000000..d5e9d3f8dee7 > --- /dev/null > +++ > b/MdePkg/Library/DxeRuntimeDebugLibSerialPort/DxeRuntime > DebugLibSerialPort.inf > @@ -0,0 +1,56 @@ > +## @file > +# DXE runtime Debug library instance based on Serial > Port library. > +# It takes care not to call into SerialPortLib or > PcdLib after > +# ExitBootServices() has been called, to prevent > touching hardware that is > +# no longer owned by the firmware, or invoking > protocols that are not safe > +# for runtime (such as gEfiPcdProtocolGuid) > +# > +# Copyright (c) 2006 - 2015, Intel Corporation. All > rights reserved.<BR> > +# Copyright (c) 2018, Linaro, Ltd. All rights > reserved.<BR> > +# > +# This program and the accompanying materials > +# are licensed and made available under the terms and > conditions of the BSD License > +# which accompanies this distribution. The full text > of the license may be found at > +# http://opensource.org/licenses/bsd-license.php. > +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON > AN "AS IS" BASIS, > +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, > EITHER EXPRESS OR IMPLIED. > +# > +# > +## > + > +[Defines] > + INF_VERSION = 0x0001001A > + BASE_NAME = > DxeRuntimeDebugLibSerialPort > + MODULE_UNI_FILE = > DxeRuntimeDebugLibSerialPort.uni > + FILE_GUID = 9D914E2F-7CCB-41DB- > 8E74-9AFF8F3BBFBF > + MODULE_TYPE = DXE_RUNTIME_DRIVER > + VERSION_STRING = 1.0 > + LIBRARY_CLASS = > DebugLib|DXE_RUNTIME_DRIVER > + CONSTRUCTOR = > DxeRuntimeDebugLibSerialPortConstructor > + DESTRUCTOR = > DxeRuntimeDebugLibSerialPortDestructor > + > +# > +# VALID_ARCHITECTURES = AARCH64 ARM IA32 X64 > IPF EBC > +# > + > +[Sources] > + DebugLib.c > + > +[Packages] > + MdePkg/MdePkg.dec > + > +[LibraryClasses] > + BaseLib > + BaseMemoryLib > + DebugPrintErrorLevelLib > + PcdLib > + PrintLib > + SerialPortLib > + > +[Guids] > + gEfiEventExitBootServicesGuid > ## CONSUMES ## Event > + > +[Pcd] > + gEfiMdePkgTokenSpaceGuid.PcdDebugClearMemoryValue > ## CONSUMES > + gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask > ## CONSUMES > + gEfiMdePkgTokenSpaceGuid.PcdFixedDebugPrintErrorLevel > ## CONSUMES > diff --git > a/MdePkg/Library/DxeRuntimeDebugLibSerialPort/DxeRuntime > DebugLibSerialPort.uni > b/MdePkg/Library/DxeRuntimeDebugLibSerialPort/DxeRuntime > DebugLibSerialPort.uni > new file mode 100644 > index 000000000000..cd65515c4177 > --- /dev/null > +++ > b/MdePkg/Library/DxeRuntimeDebugLibSerialPort/DxeRuntime > DebugLibSerialPort.uni > @@ -0,0 +1,21 @@ > +// /** @file > +// Instance of Debug Library based on Serial Port > Library. > +// > +// It uses Print Library to produce formatted output > strings to seiral port device. > +// > +// Copyright (c) 2006 - 2014, Intel Corporation. All > rights reserved.<BR> > +// > +// This program and the accompanying materials > +// are licensed and made available under the terms and > conditions of the BSD License > +// which accompanies this distribution. The full text > of the license may be found at > +// http://opensource.org/licenses/bsd-license.php. > +// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON > AN "AS IS" BASIS, > +// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, > EITHER EXPRESS OR IMPLIED. > +// > +// **/ > + > + > +#string STR_MODULE_ABSTRACT #language en-US > "Instance of Debug Library based on Serial Port Library" > + > +#string STR_MODULE_DESCRIPTION #language en-US > "It uses Print Library to produce formatted output > strings to a serial port device." > + > -- > 2.11.0 _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel
On 22 February 2018 at 17:46, Kinney, Michael D <michael.d.kinney@intel.com> wrote: > Ard, > > The check for the runtime flag seems inconsistent. > > Since the issue being addressed is use of SerialPortLib, > can't the mEfiAtRuntime flag be use around SerialPortLib > calls only. > I take it you mean the checks around ASSERT()s? I agree that those are redundant, since the check will occur in the ASSERT() implementation as well. Will fix. >> -----Original Message----- >> From: Ard Biesheuvel [mailto:ard.biesheuvel@linaro.org] >> Sent: Thursday, February 22, 2018 8:28 AM >> To: edk2-devel@lists.01.org >> Cc: leif.lindholm@linaro.org; lersek@redhat.com; Gao, >> Liming <liming.gao@intel.com>; Kinney, Michael D >> <michael.d.kinney@intel.com>; afish@apple.com; Zeng, >> Star <star.zeng@intel.com>; Ni, Ruiyu >> <ruiyu.ni@intel.com>; Ard Biesheuvel >> <ard.biesheuvel@linaro.org> >> Subject: [PATCH edk2-platforms v2 1/2] MdePkg: introduce >> DxeRuntimeDebugLibSerialPort >> >> Introduce a variant of BaseDebugLibSerialPort that >> behaves correctly with >> regards to the use of the serial port after >> ExitBootServices(). Also, it >> caches PCD values in the constructor so that no calls >> into PcdLib are >> made at runtime. >> >> Contributed-under: TianoCore Contribution Agreement 1.1 >> Signed-off-by: Ard Biesheuvel >> <ard.biesheuvel@linaro.org> >> --- >> MdePkg/Library/DxeRuntimeDebugLibSerialPort/DebugLib.c >> | 373 ++++++++++++++++++++ >> >> MdePkg/Library/DxeRuntimeDebugLibSerialPort/DxeRuntimeDe >> bugLibSerialPort.inf | 56 +++ >> >> MdePkg/Library/DxeRuntimeDebugLibSerialPort/DxeRuntimeDe >> bugLibSerialPort.uni | 21 ++ >> 3 files changed, 450 insertions(+) >> >> diff --git >> a/MdePkg/Library/DxeRuntimeDebugLibSerialPort/DebugLib.c >> b/MdePkg/Library/DxeRuntimeDebugLibSerialPort/DebugLib.c >> new file mode 100644 >> index 000000000000..8579469029a1 >> --- /dev/null >> +++ >> b/MdePkg/Library/DxeRuntimeDebugLibSerialPort/DebugLib.c >> @@ -0,0 +1,373 @@ >> +/** @file >> + DXE runtime Debug library instance based on Serial >> Port library. >> + It takes care not to call into SerialPortLib or >> PcdLib after >> + ExitBootServices() has been called, to prevent >> touching hardware that is >> + no longer owned by the firmware, or invoking >> protocols that are not safe >> + for runtime (such as gEfiPcdProtocolGuid) >> + >> + Copyright (c) 2006 - 2011, Intel Corporation. All >> rights reserved.<BR> >> + Copyright (c) 2018, Linaro, Ltd. All rights >> reserved.<BR> >> + >> + This program and the accompanying materials >> + are licensed and made available under the terms and >> conditions of the BSD License >> + which accompanies this distribution. The full text >> of the license may be found at >> + http://opensource.org/licenses/bsd-license.php. >> + >> + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON >> AN "AS IS" BASIS, >> + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, >> EITHER EXPRESS OR IMPLIED. >> + >> +**/ >> + >> +#include <Base.h> >> +#include <Library/DebugLib.h> >> +#include <Library/DebugPrintErrorLevelLib.h> >> +#include <Library/BaseLib.h> >> +#include <Library/PrintLib.h> >> +#include <Library/PcdLib.h> >> +#include <Library/BaseMemoryLib.h> >> +#include <Library/SerialPortLib.h> >> + >> +STATIC EFI_EVENT mEfiExitBootServicesEvent; >> +STATIC BOOLEAN mEfiAtRuntime; >> + >> +STATIC UINT8 mDebugClearMemoryValue; >> +STATIC UINT8 mDebugPropertyMask; >> +STATIC UINT32 mFixedDebugPrintErrorLevel; >> + >> +// >> +// Define the maximum debug and assert message length >> that this library supports >> +// >> +#define MAX_DEBUG_MESSAGE_LENGTH 0x100 >> + >> +/** >> + Set AtRuntime flag as TRUE after ExitBootServices. >> + >> + @param[in] Event The Event that is being >> processed. >> + @param[in] Context The Event Context. >> + >> +**/ >> +STATIC >> +VOID >> +EFIAPI >> +ExitBootServicesEvent ( >> + IN EFI_EVENT Event, >> + IN VOID *Context >> + ) >> +{ >> + mEfiAtRuntime = TRUE; >> +} >> + >> +/** >> + The constructor function to initialize the Serial >> Port library and >> + register a callback for the ExitBootServices event. >> + >> + @param[in] ImageHandle The firmware allocated >> handle for the EFI image. >> + @param[in] SystemTable A pointer to the EFI System >> Table. >> + >> + @retval EFI_SUCCESS The operation completed >> successfully. >> + @retval other Either the serial port failed >> to initialize or the >> + ExitBootServices event callback >> registration failed. >> +**/ >> +EFI_STATUS >> +EFIAPI >> +DxeRuntimeDebugLibSerialPortConstructor ( >> + IN EFI_HANDLE ImageHandle, >> + IN EFI_SYSTEM_TABLE *SystemTable >> + ) >> +{ >> + EFI_STATUS Status; >> + >> + mDebugClearMemoryValue = PcdGet8 >> (PcdDebugClearMemoryValue); >> + mDebugPropertyMask = PcdGet8 >> (PcdDebugPropertyMask); >> + mFixedDebugPrintErrorLevel = PcdGet32 >> (PcdFixedDebugPrintErrorLevel); >> + >> + Status = SerialPortInitialize (); >> + if (EFI_ERROR (Status)) { >> + return Status; >> + } >> + >> + return SystemTable->BootServices->CreateEventEx >> (EVT_NOTIFY_SIGNAL, >> + TPL_NOTIFY, >> ExitBootServicesEvent, NULL, >> + >> &gEfiEventExitBootServicesGuid, >> + >> &mEfiExitBootServicesEvent); >> +} >> + >> +/** >> + If a runtime driver exits with an error, it must call >> this routine >> + to free the allocated resource before the exiting. >> + >> + @param[in] ImageHandle The firmware allocated >> handle for the EFI image. >> + @param[in] SystemTable A pointer to the EFI System >> Table. >> + >> + @retval EFI_SUCCESS The Runtime Driver Lib >> shutdown successfully. >> + @retval EFI_UNSUPPORTED Runtime Driver lib was >> not initialized. >> +**/ >> +EFI_STATUS >> +EFIAPI >> +DxeRuntimeDebugLibSerialPortDestructor ( >> + IN EFI_HANDLE ImageHandle, >> + IN EFI_SYSTEM_TABLE *SystemTable >> + ) >> +{ >> + return SystemTable->BootServices->CloseEvent >> (mEfiExitBootServicesEvent); >> +} >> + >> +/** >> + Prints a debug message to the debug output device if >> the specified error level >> + is enabled. >> + >> + If any bit in ErrorLevel is also set in >> DebugPrintErrorLevelLib function >> + GetDebugPrintErrorLevel (), then print the message >> specified by Format and the >> + associated variable argument list to the debug output >> device. >> + >> + If Format is NULL, then ASSERT(). >> + >> + @param ErrorLevel The error level of the debug >> message. >> + @param Format Format string for the debug >> message to print. >> + @param ... Variable argument list whose >> contents are accessed >> + based on the format string >> specified by Format. >> + >> +**/ >> +VOID >> +EFIAPI >> +DebugPrint ( >> + IN UINTN ErrorLevel, >> + IN CONST CHAR8 *Format, >> + ... >> + ) >> +{ >> + CHAR8 Buffer[MAX_DEBUG_MESSAGE_LENGTH]; >> + VA_LIST Marker; >> + >> + if (mEfiAtRuntime) { >> + return; >> + } >> + >> + ASSERT (Format != NULL); >> + >> + // >> + // Check driver debug mask value and global mask >> + // >> + if ((ErrorLevel & GetDebugPrintErrorLevel ()) == 0) { >> + return; >> + } >> + >> + // >> + // Convert the DEBUG() message to an ASCII String >> + // >> + VA_START (Marker, Format); >> + AsciiVSPrint (Buffer, sizeof (Buffer), Format, >> Marker); >> + VA_END (Marker); >> + >> + // >> + // Send the print string to a Serial Port >> + // >> + SerialPortWrite ((UINT8 *)Buffer, AsciiStrLen >> (Buffer)); >> +} >> + >> + >> +/** >> + Prints an assert message containing a filename, line >> number, and description. >> + This may be followed by a breakpoint or a dead loop. >> + >> + Print a message of the form "ASSERT >> <FileName>(<LineNumber>): <Description>\n" >> + to the debug output device. If >> DEBUG_PROPERTY_ASSERT_BREAKPOINT_ENABLED bit >> + of PcdDebugProperyMask is set then CpuBreakpoint() is >> called. Otherwise, if >> + DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED bit of >> PcdDebugProperyMask is set then >> + CpuDeadLoop() is called. If neither of these bits >> are set, then this function >> + returns immediately after the message is printed to >> the debug output device. >> + DebugAssert() must actively prevent recursion. If >> DebugAssert() is called >> + while processing another DebugAssert(), then >> DebugAssert() must return >> + immediately. >> + >> + If FileName is NULL, then a <FileName> string of >> "(NULL) Filename" is printed. >> + If Description is NULL, then a <Description> string >> of "(NULL) Description" is >> + printed. >> + >> + @param FileName The pointer to the name of the >> source file that generated >> + the assert condition. >> + @param LineNumber The line number in the source >> file that generated the >> + assert condition >> + @param Description The pointer to the description >> of the assert condition. >> + >> +**/ >> +VOID >> +EFIAPI >> +DebugAssert ( >> + IN CONST CHAR8 *FileName, >> + IN UINTN LineNumber, >> + IN CONST CHAR8 *Description >> + ) >> +{ >> + CHAR8 Buffer[MAX_DEBUG_MESSAGE_LENGTH]; >> + >> + if (!mEfiAtRuntime) { >> + // >> + // Generate the ASSERT() message in Ascii format >> + // >> + AsciiSPrint (Buffer, sizeof (Buffer), "ASSERT [%a] >> %a(%d): %a\n", >> + gEfiCallerBaseName, FileName, LineNumber, >> Description); >> + >> + // >> + // Send the print string to the Console Output >> device >> + // >> + SerialPortWrite ((UINT8 *)Buffer, AsciiStrLen >> (Buffer)); >> + } >> + >> + // >> + // Generate a Breakpoint, DeadLoop, or NOP based on >> PCD settings >> + // >> + if ((mDebugPropertyMask & >> DEBUG_PROPERTY_ASSERT_BREAKPOINT_ENABLED) != 0) { >> + CpuBreakpoint (); >> + } else if ((mDebugPropertyMask & >> + DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED) >> != 0) { >> + CpuDeadLoop (); >> + } >> +} >> + >> + >> +/** >> + Fills a target buffer with PcdDebugClearMemoryValue, >> and returns the target >> + buffer. >> + >> + This function fills Length bytes of Buffer with the >> value specified by >> + PcdDebugClearMemoryValue, and returns Buffer. >> + >> + If Buffer is NULL, then ASSERT(). >> + If Length is greater than (MAX_ADDRESS - Buffer + 1), >> then ASSERT(). >> + >> + @param Buffer The pointer to the target buffer to >> be filled with >> + PcdDebugClearMemoryValue. >> + @param Length The number of bytes in Buffer to >> fill with >> + PcdDebugClearMemoryValue. >> + >> + @return Buffer The pointer to the target buffer >> filled with >> + PcdDebugClearMemoryValue. >> + >> +**/ >> +VOID * >> +EFIAPI >> +DebugClearMemory ( >> + OUT VOID *Buffer, >> + IN UINTN Length >> + ) >> +{ >> + if (!mEfiAtRuntime) { >> + ASSERT (Buffer != NULL); >> + ASSERT (Length <= (MAX_ADDRESS - (UINTN)Buffer + >> 1)); >> + } >> + >> + return SetMem (Buffer, Length, >> mDebugClearMemoryValue); >> +} >> + >> + >> +/** >> + Returns TRUE if ASSERT() macros are enabled. >> + >> + This function returns TRUE if the >> DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of >> + PcdDebugProperyMask is set. Otherwise FALSE is >> returned. >> + >> + @retval TRUE The >> DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of >> + PcdDebugProperyMask is set. >> + @retval FALSE The >> DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of >> + PcdDebugProperyMask is clear. >> + >> +**/ >> +BOOLEAN >> +EFIAPI >> +DebugAssertEnabled ( >> + VOID >> + ) >> +{ >> + return (BOOLEAN)((mDebugPropertyMask & >> + >> DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED) != 0); >> +} >> + >> + >> +/** >> + Returns TRUE if DEBUG() macros are enabled. >> + >> + This function returns TRUE if the >> DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of >> + PcdDebugProperyMask is set. Otherwise FALSE is >> returned. >> + >> + @retval TRUE The >> DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of >> + PcdDebugProperyMask is set. >> + @retval FALSE The >> DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of >> + PcdDebugProperyMask is clear. >> + >> +**/ >> +BOOLEAN >> +EFIAPI >> +DebugPrintEnabled ( >> + VOID >> + ) >> +{ >> + return (BOOLEAN)((mDebugPropertyMask & >> + DEBUG_PROPERTY_DEBUG_PRINT_ENABLED) >> != 0); >> +} >> + >> + >> +/** >> + Returns TRUE if DEBUG_CODE() macros are enabled. >> + >> + This function returns TRUE if the >> DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of >> + PcdDebugProperyMask is set. Otherwise FALSE is >> returned. >> + >> + @retval TRUE The >> DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of >> + PcdDebugProperyMask is set. >> + @retval FALSE The >> DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of >> + PcdDebugProperyMask is clear. >> + >> +**/ >> +BOOLEAN >> +EFIAPI >> +DebugCodeEnabled ( >> + VOID >> + ) >> +{ >> + return (BOOLEAN)((mDebugPropertyMask & >> + DEBUG_PROPERTY_DEBUG_CODE_ENABLED) >> != 0); >> +} >> + >> + >> +/** >> + Returns TRUE if DEBUG_CLEAR_MEMORY() macro is >> enabled. >> + >> + This function returns TRUE if the >> DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of >> + PcdDebugProperyMask is set. Otherwise FALSE is >> returned. >> + >> + @retval TRUE The >> DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of >> + PcdDebugProperyMask is set. >> + @retval FALSE The >> DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of >> + PcdDebugProperyMask is clear. >> + >> +**/ >> +BOOLEAN >> +EFIAPI >> +DebugClearMemoryEnabled ( >> + VOID >> + ) >> +{ >> + return (BOOLEAN)((mDebugPropertyMask & >> + >> DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED) != 0); >> +} >> + >> +/** >> + Returns TRUE if any one of the bit is set both in >> ErrorLevel and >> + PcdFixedDebugPrintErrorLevel. >> + >> + This function compares the bit mask of ErrorLevel and >> + PcdFixedDebugPrintErrorLevel. >> + >> + @retval TRUE Current ErrorLevel is supported. >> + @retval FALSE Current ErrorLevel is not supported. >> + >> +**/ >> +BOOLEAN >> +EFIAPI >> +DebugPrintLevelEnabled ( >> + IN CONST UINTN ErrorLevel >> + ) >> +{ >> + return (BOOLEAN)((ErrorLevel & >> mFixedDebugPrintErrorLevel) != 0); >> +} >> diff --git >> a/MdePkg/Library/DxeRuntimeDebugLibSerialPort/DxeRuntime >> DebugLibSerialPort.inf >> b/MdePkg/Library/DxeRuntimeDebugLibSerialPort/DxeRuntime >> DebugLibSerialPort.inf >> new file mode 100644 >> index 000000000000..d5e9d3f8dee7 >> --- /dev/null >> +++ >> b/MdePkg/Library/DxeRuntimeDebugLibSerialPort/DxeRuntime >> DebugLibSerialPort.inf >> @@ -0,0 +1,56 @@ >> +## @file >> +# DXE runtime Debug library instance based on Serial >> Port library. >> +# It takes care not to call into SerialPortLib or >> PcdLib after >> +# ExitBootServices() has been called, to prevent >> touching hardware that is >> +# no longer owned by the firmware, or invoking >> protocols that are not safe >> +# for runtime (such as gEfiPcdProtocolGuid) >> +# >> +# Copyright (c) 2006 - 2015, Intel Corporation. All >> rights reserved.<BR> >> +# Copyright (c) 2018, Linaro, Ltd. All rights >> reserved.<BR> >> +# >> +# This program and the accompanying materials >> +# are licensed and made available under the terms and >> conditions of the BSD License >> +# which accompanies this distribution. The full text >> of the license may be found at >> +# http://opensource.org/licenses/bsd-license.php. >> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON >> AN "AS IS" BASIS, >> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, >> EITHER EXPRESS OR IMPLIED. >> +# >> +# >> +## >> + >> +[Defines] >> + INF_VERSION = 0x0001001A >> + BASE_NAME = >> DxeRuntimeDebugLibSerialPort >> + MODULE_UNI_FILE = >> DxeRuntimeDebugLibSerialPort.uni >> + FILE_GUID = 9D914E2F-7CCB-41DB- >> 8E74-9AFF8F3BBFBF >> + MODULE_TYPE = DXE_RUNTIME_DRIVER >> + VERSION_STRING = 1.0 >> + LIBRARY_CLASS = >> DebugLib|DXE_RUNTIME_DRIVER >> + CONSTRUCTOR = >> DxeRuntimeDebugLibSerialPortConstructor >> + DESTRUCTOR = >> DxeRuntimeDebugLibSerialPortDestructor >> + >> +# >> +# VALID_ARCHITECTURES = AARCH64 ARM IA32 X64 >> IPF EBC >> +# >> + >> +[Sources] >> + DebugLib.c >> + >> +[Packages] >> + MdePkg/MdePkg.dec >> + >> +[LibraryClasses] >> + BaseLib >> + BaseMemoryLib >> + DebugPrintErrorLevelLib >> + PcdLib >> + PrintLib >> + SerialPortLib >> + >> +[Guids] >> + gEfiEventExitBootServicesGuid >> ## CONSUMES ## Event >> + >> +[Pcd] >> + gEfiMdePkgTokenSpaceGuid.PcdDebugClearMemoryValue >> ## CONSUMES >> + gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask >> ## CONSUMES >> + gEfiMdePkgTokenSpaceGuid.PcdFixedDebugPrintErrorLevel >> ## CONSUMES >> diff --git >> a/MdePkg/Library/DxeRuntimeDebugLibSerialPort/DxeRuntime >> DebugLibSerialPort.uni >> b/MdePkg/Library/DxeRuntimeDebugLibSerialPort/DxeRuntime >> DebugLibSerialPort.uni >> new file mode 100644 >> index 000000000000..cd65515c4177 >> --- /dev/null >> +++ >> b/MdePkg/Library/DxeRuntimeDebugLibSerialPort/DxeRuntime >> DebugLibSerialPort.uni >> @@ -0,0 +1,21 @@ >> +// /** @file >> +// Instance of Debug Library based on Serial Port >> Library. >> +// >> +// It uses Print Library to produce formatted output >> strings to seiral port device. >> +// >> +// Copyright (c) 2006 - 2014, Intel Corporation. All >> rights reserved.<BR> >> +// >> +// This program and the accompanying materials >> +// are licensed and made available under the terms and >> conditions of the BSD License >> +// which accompanies this distribution. The full text >> of the license may be found at >> +// http://opensource.org/licenses/bsd-license.php. >> +// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON >> AN "AS IS" BASIS, >> +// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, >> EITHER EXPRESS OR IMPLIED. >> +// >> +// **/ >> + >> + >> +#string STR_MODULE_ABSTRACT #language en-US >> "Instance of Debug Library based on Serial Port Library" >> + >> +#string STR_MODULE_DESCRIPTION #language en-US >> "It uses Print Library to produce formatted output >> strings to a serial port device." >> + >> -- >> 2.11.0 > _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel
On 02/22/18 17:28, Ard Biesheuvel wrote: > Introduce a variant of BaseDebugLibSerialPort that behaves correctly with > regards to the use of the serial port after ExitBootServices(). Also, it > caches PCD values in the constructor so that no calls into PcdLib are > made at runtime. > > Contributed-under: TianoCore Contribution Agreement 1.1 > Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> > --- > MdePkg/Library/DxeRuntimeDebugLibSerialPort/DebugLib.c | 373 ++++++++++++++++++++ > MdePkg/Library/DxeRuntimeDebugLibSerialPort/DxeRuntimeDebugLibSerialPort.inf | 56 +++ > MdePkg/Library/DxeRuntimeDebugLibSerialPort/DxeRuntimeDebugLibSerialPort.uni | 21 ++ > 3 files changed, 450 insertions(+) > +/** > + If a runtime driver exits with an error, it must call this routine > + to free the allocated resource before the exiting. > + > + @param[in] ImageHandle The firmware allocated handle for the EFI image. > + @param[in] SystemTable A pointer to the EFI System Table. > + > + @retval EFI_SUCCESS The Runtime Driver Lib shutdown successfully. > + @retval EFI_UNSUPPORTED Runtime Driver lib was not initialized. > +**/ > +EFI_STATUS > +EFIAPI > +DxeRuntimeDebugLibSerialPortDestructor ( > + IN EFI_HANDLE ImageHandle, > + IN EFI_SYSTEM_TABLE *SystemTable > + ) > +{ > + return SystemTable->BootServices->CloseEvent (mEfiExitBootServicesEvent); > +} The leading comments still refer to "Runtime Driver Lib", but that's harmless. The UNI file (STR_ contents and @file comment) have not been updated with the special purpose of this library, but I can live with that. Reviewed-by: Laszlo Ersek <lersek@redhat.com> Thanks! LAszlo _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel
On 02/22/18 18:50, Ard Biesheuvel wrote: > On 22 February 2018 at 17:46, Kinney, Michael D > <michael.d.kinney@intel.com> wrote: >> Ard, >> >> The check for the runtime flag seems inconsistent. >> >> Since the issue being addressed is use of SerialPortLib, >> can't the mEfiAtRuntime flag be use around SerialPortLib >> calls only. >> > > I take it you mean the checks around ASSERT()s? I agree that those are > redundant, since the check will occur in the ASSERT() implementation > as well. > > Will fix. I noticed that as well, comparing the C file against its counterpart in BaseDebugLibSerialPort. I thought it was harmless: DebugClearMemory() should only be called via DEBUG_CLEAR_MEMORY(), and that only occurs from MdeModulePkg/Core/Dxe/Mem, typically when memory (pool/pages) is freed, or the memmap is changed similarly (IIUC when entries are "converted"). None of those should happen at runtime; so I didn't think we'd get a call to DebugClearMemory() with mEfiAtRuntime==TRUE. Anyway I agree it's cleaner to fix that up. Thanks Laszlo _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel
diff --git a/MdePkg/Library/DxeRuntimeDebugLibSerialPort/DebugLib.c b/MdePkg/Library/DxeRuntimeDebugLibSerialPort/DebugLib.c new file mode 100644 index 000000000000..8579469029a1 --- /dev/null +++ b/MdePkg/Library/DxeRuntimeDebugLibSerialPort/DebugLib.c @@ -0,0 +1,373 @@ +/** @file + DXE runtime Debug library instance based on Serial Port library. + It takes care not to call into SerialPortLib or PcdLib after + ExitBootServices() has been called, to prevent touching hardware that is + no longer owned by the firmware, or invoking protocols that are not safe + for runtime (such as gEfiPcdProtocolGuid) + + Copyright (c) 2006 - 2011, Intel Corporation. All rights reserved.<BR> + Copyright (c) 2018, Linaro, Ltd. All rights reserved.<BR> + + This program and the accompanying materials + are licensed and made available under the terms and conditions of the BSD License + which accompanies this distribution. The full text of the license may be found at + http://opensource.org/licenses/bsd-license.php. + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + +**/ + +#include <Base.h> +#include <Library/DebugLib.h> +#include <Library/DebugPrintErrorLevelLib.h> +#include <Library/BaseLib.h> +#include <Library/PrintLib.h> +#include <Library/PcdLib.h> +#include <Library/BaseMemoryLib.h> +#include <Library/SerialPortLib.h> + +STATIC EFI_EVENT mEfiExitBootServicesEvent; +STATIC BOOLEAN mEfiAtRuntime; + +STATIC UINT8 mDebugClearMemoryValue; +STATIC UINT8 mDebugPropertyMask; +STATIC UINT32 mFixedDebugPrintErrorLevel; + +// +// Define the maximum debug and assert message length that this library supports +// +#define MAX_DEBUG_MESSAGE_LENGTH 0x100 + +/** + Set AtRuntime flag as TRUE after ExitBootServices. + + @param[in] Event The Event that is being processed. + @param[in] Context The Event Context. + +**/ +STATIC +VOID +EFIAPI +ExitBootServicesEvent ( + IN EFI_EVENT Event, + IN VOID *Context + ) +{ + mEfiAtRuntime = TRUE; +} + +/** + The constructor function to initialize the Serial Port library and + register a callback for the ExitBootServices event. + + @param[in] ImageHandle The firmware allocated handle for the EFI image. + @param[in] SystemTable A pointer to the EFI System Table. + + @retval EFI_SUCCESS The operation completed successfully. + @retval other Either the serial port failed to initialize or the + ExitBootServices event callback registration failed. +**/ +EFI_STATUS +EFIAPI +DxeRuntimeDebugLibSerialPortConstructor ( + IN EFI_HANDLE ImageHandle, + IN EFI_SYSTEM_TABLE *SystemTable + ) +{ + EFI_STATUS Status; + + mDebugClearMemoryValue = PcdGet8 (PcdDebugClearMemoryValue); + mDebugPropertyMask = PcdGet8 (PcdDebugPropertyMask); + mFixedDebugPrintErrorLevel = PcdGet32 (PcdFixedDebugPrintErrorLevel); + + Status = SerialPortInitialize (); + if (EFI_ERROR (Status)) { + return Status; + } + + return SystemTable->BootServices->CreateEventEx (EVT_NOTIFY_SIGNAL, + TPL_NOTIFY, ExitBootServicesEvent, NULL, + &gEfiEventExitBootServicesGuid, + &mEfiExitBootServicesEvent); +} + +/** + If a runtime driver exits with an error, it must call this routine + to free the allocated resource before the exiting. + + @param[in] ImageHandle The firmware allocated handle for the EFI image. + @param[in] SystemTable A pointer to the EFI System Table. + + @retval EFI_SUCCESS The Runtime Driver Lib shutdown successfully. + @retval EFI_UNSUPPORTED Runtime Driver lib was not initialized. +**/ +EFI_STATUS +EFIAPI +DxeRuntimeDebugLibSerialPortDestructor ( + IN EFI_HANDLE ImageHandle, + IN EFI_SYSTEM_TABLE *SystemTable + ) +{ + return SystemTable->BootServices->CloseEvent (mEfiExitBootServicesEvent); +} + +/** + Prints a debug message to the debug output device if the specified error level + is enabled. + + If any bit in ErrorLevel is also set in DebugPrintErrorLevelLib function + GetDebugPrintErrorLevel (), then print the message specified by Format and the + associated variable argument list to the debug output device. + + If Format is NULL, then ASSERT(). + + @param ErrorLevel The error level of the debug message. + @param Format Format string for the debug message to print. + @param ... Variable argument list whose contents are accessed + based on the format string specified by Format. + +**/ +VOID +EFIAPI +DebugPrint ( + IN UINTN ErrorLevel, + IN CONST CHAR8 *Format, + ... + ) +{ + CHAR8 Buffer[MAX_DEBUG_MESSAGE_LENGTH]; + VA_LIST Marker; + + if (mEfiAtRuntime) { + return; + } + + ASSERT (Format != NULL); + + // + // Check driver debug mask value and global mask + // + if ((ErrorLevel & GetDebugPrintErrorLevel ()) == 0) { + return; + } + + // + // Convert the DEBUG() message to an ASCII String + // + VA_START (Marker, Format); + AsciiVSPrint (Buffer, sizeof (Buffer), Format, Marker); + VA_END (Marker); + + // + // Send the print string to a Serial Port + // + SerialPortWrite ((UINT8 *)Buffer, AsciiStrLen (Buffer)); +} + + +/** + Prints an assert message containing a filename, line number, and description. + This may be followed by a breakpoint or a dead loop. + + Print a message of the form "ASSERT <FileName>(<LineNumber>): <Description>\n" + to the debug output device. If DEBUG_PROPERTY_ASSERT_BREAKPOINT_ENABLED bit + of PcdDebugProperyMask is set then CpuBreakpoint() is called. Otherwise, if + DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED bit of PcdDebugProperyMask is set then + CpuDeadLoop() is called. If neither of these bits are set, then this function + returns immediately after the message is printed to the debug output device. + DebugAssert() must actively prevent recursion. If DebugAssert() is called + while processing another DebugAssert(), then DebugAssert() must return + immediately. + + If FileName is NULL, then a <FileName> string of "(NULL) Filename" is printed. + If Description is NULL, then a <Description> string of "(NULL) Description" is + printed. + + @param FileName The pointer to the name of the source file that generated + the assert condition. + @param LineNumber The line number in the source file that generated the + assert condition + @param Description The pointer to the description of the assert condition. + +**/ +VOID +EFIAPI +DebugAssert ( + IN CONST CHAR8 *FileName, + IN UINTN LineNumber, + IN CONST CHAR8 *Description + ) +{ + CHAR8 Buffer[MAX_DEBUG_MESSAGE_LENGTH]; + + if (!mEfiAtRuntime) { + // + // Generate the ASSERT() message in Ascii format + // + AsciiSPrint (Buffer, sizeof (Buffer), "ASSERT [%a] %a(%d): %a\n", + gEfiCallerBaseName, FileName, LineNumber, Description); + + // + // Send the print string to the Console Output device + // + SerialPortWrite ((UINT8 *)Buffer, AsciiStrLen (Buffer)); + } + + // + // Generate a Breakpoint, DeadLoop, or NOP based on PCD settings + // + if ((mDebugPropertyMask & DEBUG_PROPERTY_ASSERT_BREAKPOINT_ENABLED) != 0) { + CpuBreakpoint (); + } else if ((mDebugPropertyMask & + DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED) != 0) { + CpuDeadLoop (); + } +} + + +/** + Fills a target buffer with PcdDebugClearMemoryValue, and returns the target + buffer. + + This function fills Length bytes of Buffer with the value specified by + PcdDebugClearMemoryValue, and returns Buffer. + + If Buffer is NULL, then ASSERT(). + If Length is greater than (MAX_ADDRESS - Buffer + 1), then ASSERT(). + + @param Buffer The pointer to the target buffer to be filled with + PcdDebugClearMemoryValue. + @param Length The number of bytes in Buffer to fill with + PcdDebugClearMemoryValue. + + @return Buffer The pointer to the target buffer filled with + PcdDebugClearMemoryValue. + +**/ +VOID * +EFIAPI +DebugClearMemory ( + OUT VOID *Buffer, + IN UINTN Length + ) +{ + if (!mEfiAtRuntime) { + ASSERT (Buffer != NULL); + ASSERT (Length <= (MAX_ADDRESS - (UINTN)Buffer + 1)); + } + + return SetMem (Buffer, Length, mDebugClearMemoryValue); +} + + +/** + Returns TRUE if ASSERT() macros are enabled. + + This function returns TRUE if the DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of + PcdDebugProperyMask is set. Otherwise FALSE is returned. + + @retval TRUE The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of + PcdDebugProperyMask is set. + @retval FALSE The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of + PcdDebugProperyMask is clear. + +**/ +BOOLEAN +EFIAPI +DebugAssertEnabled ( + VOID + ) +{ + return (BOOLEAN)((mDebugPropertyMask & + DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED) != 0); +} + + +/** + Returns TRUE if DEBUG() macros are enabled. + + This function returns TRUE if the DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of + PcdDebugProperyMask is set. Otherwise FALSE is returned. + + @retval TRUE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of + PcdDebugProperyMask is set. + @retval FALSE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of + PcdDebugProperyMask is clear. + +**/ +BOOLEAN +EFIAPI +DebugPrintEnabled ( + VOID + ) +{ + return (BOOLEAN)((mDebugPropertyMask & + DEBUG_PROPERTY_DEBUG_PRINT_ENABLED) != 0); +} + + +/** + Returns TRUE if DEBUG_CODE() macros are enabled. + + This function returns TRUE if the DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of + PcdDebugProperyMask is set. Otherwise FALSE is returned. + + @retval TRUE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of + PcdDebugProperyMask is set. + @retval FALSE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of + PcdDebugProperyMask is clear. + +**/ +BOOLEAN +EFIAPI +DebugCodeEnabled ( + VOID + ) +{ + return (BOOLEAN)((mDebugPropertyMask & + DEBUG_PROPERTY_DEBUG_CODE_ENABLED) != 0); +} + + +/** + Returns TRUE if DEBUG_CLEAR_MEMORY() macro is enabled. + + This function returns TRUE if the DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of + PcdDebugProperyMask is set. Otherwise FALSE is returned. + + @retval TRUE The DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of + PcdDebugProperyMask is set. + @retval FALSE The DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of + PcdDebugProperyMask is clear. + +**/ +BOOLEAN +EFIAPI +DebugClearMemoryEnabled ( + VOID + ) +{ + return (BOOLEAN)((mDebugPropertyMask & + DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED) != 0); +} + +/** + Returns TRUE if any one of the bit is set both in ErrorLevel and + PcdFixedDebugPrintErrorLevel. + + This function compares the bit mask of ErrorLevel and + PcdFixedDebugPrintErrorLevel. + + @retval TRUE Current ErrorLevel is supported. + @retval FALSE Current ErrorLevel is not supported. + +**/ +BOOLEAN +EFIAPI +DebugPrintLevelEnabled ( + IN CONST UINTN ErrorLevel + ) +{ + return (BOOLEAN)((ErrorLevel & mFixedDebugPrintErrorLevel) != 0); +} diff --git a/MdePkg/Library/DxeRuntimeDebugLibSerialPort/DxeRuntimeDebugLibSerialPort.inf b/MdePkg/Library/DxeRuntimeDebugLibSerialPort/DxeRuntimeDebugLibSerialPort.inf new file mode 100644 index 000000000000..d5e9d3f8dee7 --- /dev/null +++ b/MdePkg/Library/DxeRuntimeDebugLibSerialPort/DxeRuntimeDebugLibSerialPort.inf @@ -0,0 +1,56 @@ +## @file +# DXE runtime Debug library instance based on Serial Port library. +# It takes care not to call into SerialPortLib or PcdLib after +# ExitBootServices() has been called, to prevent touching hardware that is +# no longer owned by the firmware, or invoking protocols that are not safe +# for runtime (such as gEfiPcdProtocolGuid) +# +# Copyright (c) 2006 - 2015, Intel Corporation. All rights reserved.<BR> +# Copyright (c) 2018, Linaro, Ltd. All rights reserved.<BR> +# +# This program and the accompanying materials +# are licensed and made available under the terms and conditions of the BSD License +# which accompanies this distribution. The full text of the license may be found at +# http://opensource.org/licenses/bsd-license.php. +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +# +# +## + +[Defines] + INF_VERSION = 0x0001001A + BASE_NAME = DxeRuntimeDebugLibSerialPort + MODULE_UNI_FILE = DxeRuntimeDebugLibSerialPort.uni + FILE_GUID = 9D914E2F-7CCB-41DB-8E74-9AFF8F3BBFBF + MODULE_TYPE = DXE_RUNTIME_DRIVER + VERSION_STRING = 1.0 + LIBRARY_CLASS = DebugLib|DXE_RUNTIME_DRIVER + CONSTRUCTOR = DxeRuntimeDebugLibSerialPortConstructor + DESTRUCTOR = DxeRuntimeDebugLibSerialPortDestructor + +# +# VALID_ARCHITECTURES = AARCH64 ARM IA32 X64 IPF EBC +# + +[Sources] + DebugLib.c + +[Packages] + MdePkg/MdePkg.dec + +[LibraryClasses] + BaseLib + BaseMemoryLib + DebugPrintErrorLevelLib + PcdLib + PrintLib + SerialPortLib + +[Guids] + gEfiEventExitBootServicesGuid ## CONSUMES ## Event + +[Pcd] + gEfiMdePkgTokenSpaceGuid.PcdDebugClearMemoryValue ## CONSUMES + gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask ## CONSUMES + gEfiMdePkgTokenSpaceGuid.PcdFixedDebugPrintErrorLevel ## CONSUMES diff --git a/MdePkg/Library/DxeRuntimeDebugLibSerialPort/DxeRuntimeDebugLibSerialPort.uni b/MdePkg/Library/DxeRuntimeDebugLibSerialPort/DxeRuntimeDebugLibSerialPort.uni new file mode 100644 index 000000000000..cd65515c4177 --- /dev/null +++ b/MdePkg/Library/DxeRuntimeDebugLibSerialPort/DxeRuntimeDebugLibSerialPort.uni @@ -0,0 +1,21 @@ +// /** @file +// Instance of Debug Library based on Serial Port Library. +// +// It uses Print Library to produce formatted output strings to seiral port device. +// +// Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.<BR> +// +// This program and the accompanying materials +// are licensed and made available under the terms and conditions of the BSD License +// which accompanies this distribution. The full text of the license may be found at +// http://opensource.org/licenses/bsd-license.php. +// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +// +// **/ + + +#string STR_MODULE_ABSTRACT #language en-US "Instance of Debug Library based on Serial Port Library" + +#string STR_MODULE_DESCRIPTION #language en-US "It uses Print Library to produce formatted output strings to a serial port device." +
Introduce a variant of BaseDebugLibSerialPort that behaves correctly with regards to the use of the serial port after ExitBootServices(). Also, it caches PCD values in the constructor so that no calls into PcdLib are made at runtime. Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> --- MdePkg/Library/DxeRuntimeDebugLibSerialPort/DebugLib.c | 373 ++++++++++++++++++++ MdePkg/Library/DxeRuntimeDebugLibSerialPort/DxeRuntimeDebugLibSerialPort.inf | 56 +++ MdePkg/Library/DxeRuntimeDebugLibSerialPort/DxeRuntimeDebugLibSerialPort.uni | 21 ++ 3 files changed, 450 insertions(+) -- 2.11.0 _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel