| Message ID | 1519067611-206638-2-git-send-email-john.garry@huawei.com |
|---|---|
| State | New |
| Headers | show |
| Series | [1/8] dt-bindings: scsi: hisi_sas: add an property of signal attenuation | expand |
> From: Xiaofei Tan <tanxiaofei@huawei.com> > > For some new boards with hip07 chipset we are required to > set PHY config registers differently. The hw property which > determines how to set these registers is in the PHY signal > attenuation readings. > > This patch add an devicetree property, signal-attenuation, which > is used to describe the signal attenuation of an board. > > Cc: Rob Herring <robh+dt@kernel.org> > Cc: Mark Rutland <mark.rutland@arm.com> > Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> > Signed-off-by: John Garry <john.garry@huawei.com> > --- > Documentation/devicetree/bindings/scsi/hisilicon-sas.txt | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt b/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt > index df3bef7..bd32ecd 100644 > --- a/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt > +++ b/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt > @@ -53,6 +53,13 @@ Main node required properties: > Optional main node properties: > - hip06-sas-v2-quirk-amt : when set, indicates that the v2 controller has the > "am-max-transmissions" limitation. > + - signal-attenuation : array of 3 32-bit values, containing de-emphasis, > + preshoot, and boost attenuation readings for the board. They > + are used to describe the signal attenuation of the board. These > + values' range is 7600 to 12400, and used to represent -24dB to > + 24dB. > + The formula is "y = (x-10000)/10000". For example, 10478 > + means 4.78dB. > > Example: > sas0: sas@c1000000 { Rob/Mark: Please review! -- Martin K. Petersen Oracle Linux Engineering -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Feb 20, 2018 at 03:13:24AM +0800, John Garry wrote: > From: Xiaofei Tan <tanxiaofei@huawei.com> > > For some new boards with hip07 chipset we are required to > set PHY config registers differently. The hw property which > determines how to set these registers is in the PHY signal > attenuation readings. > > This patch add an devicetree property, signal-attenuation, which > is used to describe the signal attenuation of an board. > > Cc: Rob Herring <robh+dt@kernel.org> > Cc: Mark Rutland <mark.rutland@arm.com> > Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> > Signed-off-by: John Garry <john.garry@huawei.com> > --- > Documentation/devicetree/bindings/scsi/hisilicon-sas.txt | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt b/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt > index df3bef7..bd32ecd 100644 > --- a/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt > +++ b/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt > @@ -53,6 +53,13 @@ Main node required properties: > Optional main node properties: > - hip06-sas-v2-quirk-amt : when set, indicates that the v2 controller has the > "am-max-transmissions" limitation. > + - signal-attenuation : array of 3 32-bit values, containing de-emphasis, Needs a vendor prefix. > + preshoot, and boost attenuation readings for the board. They > + are used to describe the signal attenuation of the board. These > + values' range is 7600 to 12400, and used to represent -24dB to > + 24dB. > + The formula is "y = (x-10000)/10000". For example, 10478 > + means 4.78dB. > > Example: > sas0: sas@c1000000 { > -- > 1.9.1 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt b/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt index df3bef7..bd32ecd 100644 --- a/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt +++ b/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt @@ -53,6 +53,13 @@ Main node required properties: Optional main node properties: - hip06-sas-v2-quirk-amt : when set, indicates that the v2 controller has the "am-max-transmissions" limitation. + - signal-attenuation : array of 3 32-bit values, containing de-emphasis, + preshoot, and boost attenuation readings for the board. They + are used to describe the signal attenuation of the board. These + values' range is 7600 to 12400, and used to represent -24dB to + 24dB. + The formula is "y = (x-10000)/10000". For example, 10478 + means 4.78dB. Example: sas0: sas@c1000000 {