diff mbox series

[v2,3/5] dmaengine: qcom: bam_dma: get num-channels and num-ees from dt

Message ID 20180214144459.29813-4-srinivas.kandagatla@linaro.org
State Accepted
Commit 48d163b1aa6e7f650c0b7a4f9c61c387a6def868
Headers show
Series None | expand

Commit Message

Srinivas Kandagatla Feb. 14, 2018, 2:44 p.m. UTC 
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>


When Linux is master of BAM, it can directly read registers to know number
of supported channels, however when its remotely controlled reading these
registers would trigger a crash if the BAM is not yet initialized or
powered up on the remote side.

This patch allows driver to read num-channels and num-ees from Device Tree
for remotely controlled BAM.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

---
 drivers/dma/qcom/bam_dma.c | 27 ++++++++++++++++++++++-----
 1 file changed, 22 insertions(+), 5 deletions(-)

-- 
2.15.1

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox series

Patch

diff --git a/drivers/dma/qcom/bam_dma.c b/drivers/dma/qcom/bam_dma.c
index ae4c7b6930b8..146b5d03256f 100644
--- a/drivers/dma/qcom/bam_dma.c
+++ b/drivers/dma/qcom/bam_dma.c
@@ -393,6 +393,7 @@  struct bam_device {
 	struct device_dma_parameters dma_parms;
 	struct bam_chan *channels;
 	u32 num_channels;
+	u32 num_ees;
 
 	/* execution environment ID, from DT */
 	u32 ee;
@@ -1128,15 +1129,19 @@  static int bam_init(struct bam_device *bdev)
 	u32 val;
 
 	/* read revision and configuration information */
-	val = readl_relaxed(bam_addr(bdev, 0, BAM_REVISION)) >> NUM_EES_SHIFT;
-	val &= NUM_EES_MASK;
+	if (!bdev->num_ees) {
+		val = readl_relaxed(bam_addr(bdev, 0, BAM_REVISION));
+		bdev->num_ees = (val >> NUM_EES_SHIFT) & NUM_EES_MASK;
+	}
 
 	/* check that configured EE is within range */
-	if (bdev->ee >= val)
+	if (bdev->ee >= bdev->num_ees)
 		return -EINVAL;
 
-	val = readl_relaxed(bam_addr(bdev, 0, BAM_NUM_PIPES));
-	bdev->num_channels = val & BAM_NUM_PIPES_MASK;
+	if (!bdev->num_channels) {
+		val = readl_relaxed(bam_addr(bdev, 0, BAM_NUM_PIPES));
+		bdev->num_channels = val & BAM_NUM_PIPES_MASK;
+	}
 
 	if (bdev->controlled_remotely)
 		return 0;
@@ -1232,6 +1237,18 @@  static int bam_dma_probe(struct platform_device *pdev)
 	bdev->controlled_remotely = of_property_read_bool(pdev->dev.of_node,
 						"qcom,controlled-remotely");
 
+	if (bdev->controlled_remotely) {
+		ret = of_property_read_u32(pdev->dev.of_node, "num-channels",
+					   &bdev->num_channels);
+		if (ret)
+			dev_err(bdev->dev, "num-channels unspecified in dt\n");
+
+		ret = of_property_read_u32(pdev->dev.of_node, "qcom,num-ees",
+					   &bdev->num_ees);
+		if (ret)
+			dev_err(bdev->dev, "num-ees unspecified in dt\n");
+	}
+
 	bdev->bamclk = devm_clk_get(bdev->dev, "bam_clk");
 	if (IS_ERR(bdev->bamclk)) {
 		bdev->bamclk = NULL;