new file mode 100644
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
+#ifndef __DT_BINDINGS_Q6_AFE_H__
+#define __DT_BINDINGS_Q6_AFE_H__
+
+/* Audio Front End (AFE) Ports */
+#define AFE_PORT_HDMI_RX 8
+
+#endif /* __DT_BINDINGS_Q6_AFE_H__ */
+
@@ -48,10 +48,15 @@ config SND_SOC_QDSP6_COMMON
tristate
default n
+config SND_SOC_QDSP6_AFE
+ tristate
+ default n
+
config SND_SOC_QDSP6
tristate "SoC ALSA audio driver for QDSP6"
depends on QCOM_APR && HAS_DMA
select SND_SOC_QDSP6_COMMON
+ select SND_SOC_QDSP6_AFE
help
To add support for MSM QDSP6 Soc Audio.
This will enable sound soc platform specific
@@ -13,6 +13,11 @@ obj-$(CONFIG_SND_SOC_LPASS_APQ8016) += snd-soc-lpass-apq8016.o
# Machine
snd-soc-storm-objs := storm.o
snd-soc-apq8016-sbc-objs := apq8016_sbc.o
+snd-soc-msm8996-objs := apq8096.o
obj-$(CONFIG_SND_SOC_STORM) += snd-soc-storm.o
obj-$(CONFIG_SND_SOC_APQ8016_SBC) += snd-soc-apq8016-sbc.o
+obj-$(CONFIG_SND_SOC_MSM8996) += snd-soc-msm8996.o
+
+#DSP lib
+obj-$(CONFIG_SND_SOC_QDSP6) += qdsp6/
@@ -1 +1,2 @@
obj-$(CONFIG_SND_SOC_QDSP6_COMMON) += q6dsp-common.o
+obj-$(CONFIG_SND_SOC_QDSP6_AFE) += q6afe.o
new file mode 100644
@@ -0,0 +1,520 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2011-2017, The Linux Foundation
+ * Copyright (c) 2018, Linaro Limited
+ */
+
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/uaccess.h>
+#include <linux/wait.h>
+#include <linux/jiffies.h>
+#include <linux/sched.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/delay.h>
+#include <linux/soc/qcom/apr.h>
+#include "q6dsp-errno.h"
+#include "q6afe.h"
+
+/* AFE CMDs */
+#define AFE_PORT_CMD_DEVICE_START 0x000100E5
+#define AFE_PORT_CMD_DEVICE_STOP 0x000100E6
+#define AFE_PORT_CMD_SET_PARAM_V2 0x000100EF
+#define AFE_PORT_CMDRSP_GET_PARAM_V2 0x00010106
+#define AFE_PARAM_ID_HDMI_CONFIG 0x00010210
+#define AFE_MODULE_AUDIO_DEV_INTERFACE 0x0001020C
+
+/* Port IDs */
+#define AFE_API_VERSION_HDMI_CONFIG 0x1
+#define AFE_PORT_ID_MULTICHAN_HDMI_RX 0x100E
+#define TIMEOUT_MS 1000
+#define AFE_CMD_RESP_AVAIL 0
+#define AFE_CMD_RESP_NONE 1
+
+struct q6afe {
+ struct apr_device *apr;
+ struct device *dev;
+ int state;
+ int status;
+
+ struct mutex lock;
+ struct list_head port_list;
+ spinlock_t port_list_lock;
+ struct list_head node;
+ void *dai_data;
+};
+
+struct afe_port_cmd_device_start {
+ struct apr_hdr hdr;
+ u16 port_id;
+ u16 reserved;
+} __packed;
+
+struct afe_port_cmd_device_stop {
+ struct apr_hdr hdr;
+ u16 port_id;
+ u16 reserved;
+/* Reserved for 32-bit alignment. This field must be set to 0.*/
+} __packed;
+
+struct afe_port_param_data_v2 {
+ u32 module_id;
+ u32 param_id;
+ u16 param_size;
+ u16 reserved;
+} __packed;
+
+struct afe_port_cmd_set_param_v2 {
+ u16 port_id;
+ u16 payload_size;
+ u32 payload_address_lsw;
+ u32 payload_address_msw;
+ u32 mem_map_handle;
+} __packed;
+
+struct afe_param_id_hdmi_multi_chan_audio_cfg {
+ u32 hdmi_cfg_minor_version;
+ u16 datatype;
+ u16 channel_allocation;
+ u32 sample_rate;
+ u16 bit_width;
+ u16 reserved;
+} __packed;
+
+union afe_port_config {
+ struct afe_param_id_hdmi_multi_chan_audio_cfg hdmi_multi_ch;
+} __packed;
+
+struct q6afe_port {
+ wait_queue_head_t wait;
+ union afe_port_config port_cfg;
+ int token;
+ int id;
+ int cfg_type;
+ struct q6afe *afe;
+ struct list_head node;
+};
+
+struct afe_audioif_config_command {
+ struct apr_hdr hdr;
+ struct afe_port_cmd_set_param_v2 param;
+ struct afe_port_param_data_v2 pdata;
+ union afe_port_config port;
+} __packed;
+
+struct afe_port_map {
+ int port_id;
+ int token;
+ int is_rx;
+ int is_dig_pcm;
+};
+
+/* Port map of index vs real hw port ids */
+static struct afe_port_map port_maps[AFE_PORT_MAX] = {
+ [AFE_PORT_HDMI_RX] = { AFE_PORT_ID_MULTICHAN_HDMI_RX,
+ AFE_PORT_HDMI_RX, 1, 1},
+};
+
+static struct q6afe_port *afe_find_port(struct q6afe *afe, int token)
+{
+ struct q6afe_port *p = NULL;
+
+ spin_lock(&afe->port_list_lock);
+ list_for_each_entry(p, &afe->port_list, node)
+ if (p->token == token)
+ break;
+
+ spin_unlock(&afe->port_list_lock);
+ return p;
+}
+
+static int afe_callback(struct apr_device *adev,
+ struct apr_client_message *data)
+{
+ struct q6afe *afe = dev_get_drvdata(&adev->dev);
+ struct aprv2_ibasic_rsp_result_t *res;
+ struct q6afe_port *port;
+
+ if (!data->payload_size)
+ return 0;
+
+ res = data->payload;
+ if (data->opcode == APR_BASIC_RSP_RESULT) {
+ if (res->status) {
+ afe->status = res->status;
+ dev_err(afe->dev, "cmd = 0x%x returned error = 0x%x\n",
+ res->opcode, res->status);
+ }
+
+ switch (res->opcode) {
+ case AFE_PORT_CMD_SET_PARAM_V2:
+ case AFE_PORT_CMD_DEVICE_STOP:
+ case AFE_PORT_CMD_DEVICE_START:
+ afe->state = AFE_CMD_RESP_AVAIL;
+ port = afe_find_port(afe, data->token);
+ if (port)
+ wake_up(&port->wait);
+
+ break;
+ default:
+ dev_err(afe->dev, "Unknown cmd 0x%x\n", res->opcode);
+ break;
+ }
+ }
+
+ return 0;
+}
+/**
+ * q6afe_get_port_id() - Get port id from a given port index
+ *
+ * @index: port index
+ *
+ * Return: Will be an negative on error or valid port_id on success
+ */
+int q6afe_get_port_id(int index)
+{
+ if (index < 0 || index > AFE_PORT_MAX)
+ return -EINVAL;
+
+ return port_maps[index].port_id;
+}
+EXPORT_SYMBOL_GPL(q6afe_get_port_id);
+
+static int afe_apr_send_pkt(struct q6afe *afe, void *data,
+ wait_queue_head_t *wait)
+{
+ int ret;
+
+ mutex_lock(&afe->lock);
+ afe->status = 0;
+ afe->state = AFE_CMD_RESP_NONE;
+
+ ret = apr_send_pkt(afe->apr, data);
+ if (ret < 0) {
+ dev_err(afe->dev, "packet not transmitted\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ ret = wait_event_timeout(*wait, (afe->state == AFE_CMD_RESP_AVAIL),
+ msecs_to_jiffies(TIMEOUT_MS));
+ if (!ret) {
+ ret = -ETIMEDOUT;
+ } else if (afe->status > 0) {
+ dev_err(afe->dev, "DSP returned error[%s]\n",
+ q6dsp_strerror(afe->status));
+ ret = q6dsp_errno(afe->status);
+ } else {
+ ret = 0;
+ }
+
+err:
+ mutex_unlock(&afe->lock);
+
+ return ret;
+}
+
+static int afe_send_cmd_port_start(struct q6afe_port *port)
+{
+ u16 port_id = port->id;
+ struct afe_port_cmd_device_start start;
+ struct q6afe *afe = port->afe;
+ int ret;
+
+ start.hdr.hdr_field = APR_HDR_FIELD(APR_MSG_TYPE_SEQ_CMD,
+ APR_HDR_LEN(APR_HDR_SIZE),
+ APR_PKT_VER);
+ start.hdr.pkt_size = sizeof(start);
+ start.hdr.src_port = 0;
+ start.hdr.dest_port = 0;
+ start.hdr.token = port->token;
+ start.hdr.opcode = AFE_PORT_CMD_DEVICE_START;
+ start.port_id = port_id;
+
+ ret = afe_apr_send_pkt(afe, &start, &port->wait);
+ if (ret)
+ dev_err(afe->dev, "AFE enable for port 0x%x failed %d\n",
+ port_id, ret);
+
+ return ret;
+}
+
+static int q6afe_port_set_param_v2(struct q6afe_port *port, void *data,
+ int param_id, int psize)
+{
+ struct apr_hdr *hdr;
+ struct afe_port_cmd_set_param_v2 *param;
+ struct afe_port_param_data_v2 *pdata;
+ struct q6afe *afe = port->afe;
+ u16 port_id = port->id;
+ int ret;
+
+ hdr = data;
+ param = data + sizeof(*hdr);
+ pdata = data + sizeof(*hdr) + sizeof(*param);
+
+ hdr->hdr_field = APR_HDR_FIELD(APR_MSG_TYPE_SEQ_CMD,
+ APR_HDR_LEN(APR_HDR_SIZE),
+ APR_PKT_VER);
+ hdr->pkt_size = sizeof(*hdr) + sizeof(*param) +
+ sizeof(*pdata) + psize;
+ hdr->src_port = 0;
+ hdr->dest_port = 0;
+ hdr->token = port->token;
+ hdr->opcode = AFE_PORT_CMD_SET_PARAM_V2;
+ param->port_id = port_id;
+ param->payload_size = sizeof(*pdata) + psize;
+ param->payload_address_lsw = 0x00;
+ param->payload_address_msw = 0x00;
+ param->mem_map_handle = 0x00;
+ pdata->module_id = AFE_MODULE_AUDIO_DEV_INTERFACE;
+ pdata->param_id = param_id;
+ pdata->param_size = psize;
+
+ ret = afe_apr_send_pkt(afe, data, &port->wait);
+ if (ret)
+ dev_err(afe->dev, "AFE enable for port 0x%x failed %d\n",
+ port_id, ret);
+
+
+ return ret;
+}
+
+static int afe_port_start(struct q6afe_port *port,
+ union afe_port_config *afe_config)
+{
+ struct afe_audioif_config_command config = {0,};
+ struct q6afe *afe = port->afe;
+ int port_id = port->id;
+ int ret, param_id = port->cfg_type;
+
+ config.port = *afe_config;
+
+ ret = q6afe_port_set_param_v2(port, &config, param_id,
+ sizeof(*afe_config));
+ if (ret) {
+ dev_err(afe->dev, "AFE enable for port 0x%x failed %d\n",
+ port_id, ret);
+ return ret;
+ }
+ return afe_send_cmd_port_start(port);
+}
+
+/**
+ * q6afe_port_stop() - Stop a afe port
+ *
+ * @port: Instance of port to stop
+ *
+ * Return: Will be an negative on packet size on success.
+ */
+int q6afe_port_stop(struct q6afe_port *port)
+{
+ int port_id = port->id;
+ struct afe_port_cmd_device_stop stop;
+ struct q6afe *afe = port->afe;
+ int ret = 0;
+ int index = 0;
+
+ port_id = port->id;
+ index = port->token;
+ if (index < 0 || index > AFE_PORT_MAX) {
+ dev_err(afe->dev, "AFE port index[%d] invalid!\n", index);
+ return -EINVAL;
+ }
+
+ stop.hdr.hdr_field = APR_HDR_FIELD(APR_MSG_TYPE_SEQ_CMD,
+ APR_HDR_LEN(APR_HDR_SIZE),
+ APR_PKT_VER);
+ stop.hdr.pkt_size = sizeof(stop);
+ stop.hdr.src_port = 0;
+ stop.hdr.dest_port = 0;
+ stop.hdr.token = index;
+ stop.hdr.opcode = AFE_PORT_CMD_DEVICE_STOP;
+ stop.port_id = port_id;
+ stop.reserved = 0;
+
+ ret = afe_apr_send_pkt(afe, &stop, &port->wait);
+ if (ret)
+ dev_err(afe->dev, "AFE close failed %d\n", ret);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(q6afe_port_stop);
+
+/**
+ * q6afe_set_dai_data() - set dai private data
+ *
+ * @dev: Pointer to afe device.
+ * @data: dai private data
+ *
+ */
+void q6afe_set_dai_data(struct device *dev, void *data)
+{
+ struct q6afe *afe = dev_get_drvdata(dev);
+
+ afe->dai_data = data;
+}
+EXPORT_SYMBOL_GPL(q6afe_set_dai_data);
+
+/**
+ * q6afe_get_dai_data() - get dai private data
+ *
+ * @dev: Pointer to afe device.
+ *
+ * Return: pointer to dai private data
+ */
+void *q6afe_get_dai_data(struct device *dev)
+{
+ struct q6afe *afe = dev_get_drvdata(dev);
+
+ return afe->dai_data;
+}
+EXPORT_SYMBOL_GPL(q6afe_get_dai_data);
+
+/**
+ * q6afe_hdmi_port_prepare() - Prepare hdmi afe port.
+ *
+ * @port: Instance of afe port
+ * @cfg: HDMI configuration for the afe port
+ *
+ */
+void q6afe_hdmi_port_prepare(struct q6afe_port *port,
+ struct q6afe_hdmi_cfg *cfg)
+{
+ union afe_port_config *pcfg = &port->port_cfg;
+
+ pcfg->hdmi_multi_ch.hdmi_cfg_minor_version =
+ AFE_API_VERSION_HDMI_CONFIG;
+ pcfg->hdmi_multi_ch.datatype = cfg->datatype;
+ pcfg->hdmi_multi_ch.channel_allocation = cfg->channel_allocation;
+ pcfg->hdmi_multi_ch.sample_rate = cfg->sample_rate;
+ pcfg->hdmi_multi_ch.bit_width = cfg->bit_width;
+}
+EXPORT_SYMBOL_GPL(q6afe_hdmi_port_prepare);
+
+/**
+ * q6afe_port_start() - Start a afe port
+ *
+ * @port: Instance of port to start
+ *
+ * Return: Will be an negative on packet size on success.
+ */
+int q6afe_port_start(struct q6afe_port *port)
+{
+ return afe_port_start(port, &port->port_cfg);
+}
+EXPORT_SYMBOL_GPL(q6afe_port_start);
+
+/**
+ * q6afe_port_get_from_id() - Get port instance from a port id
+ *
+ * @dev: Pointer to afe child device.
+ * @id: port id
+ *
+ * Return: Will be an error pointer on error or a valid afe port
+ * on success.
+ */
+struct q6afe_port *q6afe_port_get_from_id(struct device *dev, int id)
+{
+ int port_id;
+ struct q6afe *afe = dev_get_drvdata(dev);
+ struct q6afe_port *port;
+ int cfg_type;
+
+ if (id < 0 || id > AFE_PORT_MAX) {
+ dev_err(dev, "AFE port token[%d] invalid!\n", id);
+ return ERR_PTR(-EINVAL);
+ }
+
+ port_id = port_maps[id].port_id;
+
+ switch (port_id) {
+ case AFE_PORT_ID_MULTICHAN_HDMI_RX:
+ cfg_type = AFE_PARAM_ID_HDMI_CONFIG;
+ break;
+ default:
+ dev_err(dev, "Invalid port id 0x%x\n", port_id);
+ return ERR_PTR(-EINVAL);
+ }
+
+ port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL);
+ if (!port)
+ return ERR_PTR(-ENOMEM);
+
+ init_waitqueue_head(&port->wait);
+
+ port->token = id;
+ port->id = port_id;
+ port->afe = afe;
+ port->cfg_type = cfg_type;
+
+ spin_lock(&afe->port_list_lock);
+ list_add_tail(&port->node, &afe->port_list);
+ spin_unlock(&afe->port_list_lock);
+
+ return port;
+
+}
+EXPORT_SYMBOL_GPL(q6afe_port_get_from_id);
+
+/**
+ * q6afe_port_put() - Release port reference
+ *
+ * @port: Instance of port to put
+ */
+void q6afe_port_put(struct q6afe_port *port)
+{
+ struct q6afe *afe = port->afe;
+
+ spin_lock(&afe->port_list_lock);
+ list_del(&port->node);
+ spin_unlock(&afe->port_list_lock);
+}
+EXPORT_SYMBOL_GPL(q6afe_port_put);
+
+static int q6afev2_probe(struct apr_device *adev)
+{
+ struct q6afe *afe;
+ struct device *dev = &adev->dev;
+
+ afe = devm_kzalloc(dev, sizeof(*afe), GFP_KERNEL);
+ if (!afe)
+ return -ENOMEM;
+
+ afe->apr = adev;
+ mutex_init(&afe->lock);
+ afe->dev = dev;
+ INIT_LIST_HEAD(&afe->port_list);
+ spin_lock_init(&afe->port_list_lock);
+
+ dev_set_drvdata(dev, afe);
+
+ return q6afe_dai_dev_probe(dev);
+}
+
+static int q6afev2_remove(struct apr_device *adev)
+{
+ return q6afe_dai_dev_remove(&adev->dev);
+}
+
+static const struct of_device_id q6afe_device_id[] = {
+ { .compatible = "qcom,q6afe" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, q6afe_device_id);
+
+static struct apr_driver qcom_q6afe_driver = {
+ .probe = q6afev2_probe,
+ .remove = q6afev2_remove,
+ .callback = afe_callback,
+ .driver = {
+ .name = "qcom-q6afe",
+ .of_match_table = of_match_ptr(q6afe_device_id),
+
+ },
+};
+
+module_apr_driver(qcom_q6afe_driver);
+MODULE_DESCRIPTION("Q6 Audio Front End");
+MODULE_LICENSE("GPL v2");
new file mode 100644
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#ifndef __Q6AFE_H__
+#define __Q6AFE_H__
+
+#include <dt-bindings/sound/qcom,q6afe.h>
+
+#define AFE_PORT_MAX 9
+
+#define MSM_AFE_PORT_TYPE_RX 0
+#define MSM_AFE_PORT_TYPE_TX 1
+#define AFE_MAX_PORTS AFE_PORT_MAX
+
+struct q6afe_hdmi_cfg {
+ u16 datatype;
+ u16 channel_allocation;
+ u32 sample_rate;
+ u16 bit_width;
+};
+
+struct q6afe_port_config {
+ struct q6afe_hdmi_cfg hdmi;
+};
+
+struct q6afe_port;
+void q6afe_set_dai_data(struct device *dev, void *data);
+void *q6afe_get_dai_data(struct device *dev);
+
+struct q6afe_port *q6afe_port_get_from_id(struct device *dev, int id);
+int q6afe_port_start(struct q6afe_port *port);
+int q6afe_port_stop(struct q6afe_port *port);
+void q6afe_port_put(struct q6afe_port *port);
+int q6afe_get_port_id(int index);
+void q6afe_hdmi_port_prepare(struct q6afe_port *port,
+ struct q6afe_hdmi_cfg *cfg);
+
+#endif /* __Q6AFE_H__ */