diff mbox series

crypto/generic - sha3: deal with oversize stack frames

Message ID 20180127091832.24435-1-ard.biesheuvel@linaro.org
State New
Headers show
Series crypto/generic - sha3: deal with oversize stack frames | expand

Commit Message

Ard Biesheuvel Jan. 27, 2018, 9:18 a.m. UTC 
As reported by kbuild test robot, the optimized SHA3 C implementation
compiles to mn10300 code that uses a disproportionate amount of stack
space, i.e.,

  crypto/sha3_generic.c: In function 'keccakf':
  crypto/sha3_generic.c:147:1: warning: the frame size of 1232 bytes is larger than 1024 bytes [-Wframe-larger-than=]

As kindly diagnosed by Arnd, this does not only occur when building for
the mn10300 architecture (which is what the report was about) but also
for h8300, and builds for other 32-bit architectures show an increase in
stack space utilization as well.

Given that SHA3 operates on 64-bit quantities, and keeps a state matrix
of 25 64-bit words, it is not surprising that 32-bit architectures with
few general purpose registers are impacted the most by this, and it is
therefore reasonable to implement a workaround that distinguishes between
32-bit and 64-bit architectures.

Arnd figured out that taking the round calculation out of the loop, and
inlining it explicitly but only on 64-bit architectures preserves most
of the performance gain achieved by the rewrite, and also gets rid of
the excessive use of stack space.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

---
 crypto/sha3_generic.c | 218 +++++++++++---------
 1 file changed, 118 insertions(+), 100 deletions(-)

-- 
2.11.0

Comments

Herbert Xu Feb. 9, 2018, 3:50 p.m. UTC | #1 
On Sat, Jan 27, 2018 at 09:18:32AM +0000, Ard Biesheuvel wrote:
> As reported by kbuild test robot, the optimized SHA3 C implementation

> compiles to mn10300 code that uses a disproportionate amount of stack

> space, i.e.,

> 

>   crypto/sha3_generic.c: In function 'keccakf':

>   crypto/sha3_generic.c:147:1: warning: the frame size of 1232 bytes is larger than 1024 bytes [-Wframe-larger-than=]

> 

> As kindly diagnosed by Arnd, this does not only occur when building for

> the mn10300 architecture (which is what the report was about) but also

> for h8300, and builds for other 32-bit architectures show an increase in

> stack space utilization as well.

> 

> Given that SHA3 operates on 64-bit quantities, and keeps a state matrix

> of 25 64-bit words, it is not surprising that 32-bit architectures with

> few general purpose registers are impacted the most by this, and it is

> therefore reasonable to implement a workaround that distinguishes between

> 32-bit and 64-bit architectures.

> 

> Arnd figured out that taking the round calculation out of the loop, and

> inlining it explicitly but only on 64-bit architectures preserves most

> of the performance gain achieved by the rewrite, and also gets rid of

> the excessive use of stack space.

> 

> Reported-by: kbuild test robot <fengguang.wu@intel.com>

> Suggested-by: Arnd Bergmann <arnd@arndb.de>

> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>


Patch applied.  Thanks.
-- 
Email: Herbert Xu <herbert@gondor.apana.org.au>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt
diff mbox series

Patch

diff --git a/crypto/sha3_generic.c b/crypto/sha3_generic.c
index a965b9d80559..951c4eb70262 100644
--- a/crypto/sha3_generic.c
+++ b/crypto/sha3_generic.c
@@ -20,6 +20,20 @@ 
 #include <crypto/sha3.h>
 #include <asm/unaligned.h>
 
+/*
+ * On some 32-bit architectures (mn10300 and h8300), GCC ends up using
+ * over 1 KB of stack if we inline the round calculation into the loop
+ * in keccakf(). On the other hand, on 64-bit architectures with plenty
+ * of [64-bit wide] general purpose registers, not inlining it severely
+ * hurts performance. So let's use 64-bitness as a heuristic to decide
+ * whether to inline or not.
+ */
+#ifdef CONFIG_64BIT
+#define SHA3_INLINE	inline
+#else
+#define SHA3_INLINE	noinline
+#endif
+
 #define KECCAK_ROUNDS 24
 
 static const u64 keccakf_rndc[24] = {
@@ -35,111 +49,115 @@  static const u64 keccakf_rndc[24] = {
 
 /* update the state with given number of rounds */
 
-static void __attribute__((__optimize__("O3"))) keccakf(u64 st[25])
+static SHA3_INLINE void keccakf_round(u64 st[25])
 {
 	u64 t[5], tt, bc[5];
-	int round;
 
-	for (round = 0; round < KECCAK_ROUNDS; round++) {
+	/* Theta */
+	bc[0] = st[0] ^ st[5] ^ st[10] ^ st[15] ^ st[20];
+	bc[1] = st[1] ^ st[6] ^ st[11] ^ st[16] ^ st[21];
+	bc[2] = st[2] ^ st[7] ^ st[12] ^ st[17] ^ st[22];
+	bc[3] = st[3] ^ st[8] ^ st[13] ^ st[18] ^ st[23];
+	bc[4] = st[4] ^ st[9] ^ st[14] ^ st[19] ^ st[24];
+
+	t[0] = bc[4] ^ rol64(bc[1], 1);
+	t[1] = bc[0] ^ rol64(bc[2], 1);
+	t[2] = bc[1] ^ rol64(bc[3], 1);
+	t[3] = bc[2] ^ rol64(bc[4], 1);
+	t[4] = bc[3] ^ rol64(bc[0], 1);
+
+	st[0] ^= t[0];
+
+	/* Rho Pi */
+	tt = st[1];
+	st[ 1] = rol64(st[ 6] ^ t[1], 44);
+	st[ 6] = rol64(st[ 9] ^ t[4], 20);
+	st[ 9] = rol64(st[22] ^ t[2], 61);
+	st[22] = rol64(st[14] ^ t[4], 39);
+	st[14] = rol64(st[20] ^ t[0], 18);
+	st[20] = rol64(st[ 2] ^ t[2], 62);
+	st[ 2] = rol64(st[12] ^ t[2], 43);
+	st[12] = rol64(st[13] ^ t[3], 25);
+	st[13] = rol64(st[19] ^ t[4],  8);
+	st[19] = rol64(st[23] ^ t[3], 56);
+	st[23] = rol64(st[15] ^ t[0], 41);
+	st[15] = rol64(st[ 4] ^ t[4], 27);
+	st[ 4] = rol64(st[24] ^ t[4], 14);
+	st[24] = rol64(st[21] ^ t[1],  2);
+	st[21] = rol64(st[ 8] ^ t[3], 55);
+	st[ 8] = rol64(st[16] ^ t[1], 45);
+	st[16] = rol64(st[ 5] ^ t[0], 36);
+	st[ 5] = rol64(st[ 3] ^ t[3], 28);
+	st[ 3] = rol64(st[18] ^ t[3], 21);
+	st[18] = rol64(st[17] ^ t[2], 15);
+	st[17] = rol64(st[11] ^ t[1], 10);
+	st[11] = rol64(st[ 7] ^ t[2],  6);
+	st[ 7] = rol64(st[10] ^ t[0],  3);
+	st[10] = rol64(    tt ^ t[1],  1);
+
+	/* Chi */
+	bc[ 0] = ~st[ 1] & st[ 2];
+	bc[ 1] = ~st[ 2] & st[ 3];
+	bc[ 2] = ~st[ 3] & st[ 4];
+	bc[ 3] = ~st[ 4] & st[ 0];
+	bc[ 4] = ~st[ 0] & st[ 1];
+	st[ 0] ^= bc[ 0];
+	st[ 1] ^= bc[ 1];
+	st[ 2] ^= bc[ 2];
+	st[ 3] ^= bc[ 3];
+	st[ 4] ^= bc[ 4];
+
+	bc[ 0] = ~st[ 6] & st[ 7];
+	bc[ 1] = ~st[ 7] & st[ 8];
+	bc[ 2] = ~st[ 8] & st[ 9];
+	bc[ 3] = ~st[ 9] & st[ 5];
+	bc[ 4] = ~st[ 5] & st[ 6];
+	st[ 5] ^= bc[ 0];
+	st[ 6] ^= bc[ 1];
+	st[ 7] ^= bc[ 2];
+	st[ 8] ^= bc[ 3];
+	st[ 9] ^= bc[ 4];
+
+	bc[ 0] = ~st[11] & st[12];
+	bc[ 1] = ~st[12] & st[13];
+	bc[ 2] = ~st[13] & st[14];
+	bc[ 3] = ~st[14] & st[10];
+	bc[ 4] = ~st[10] & st[11];
+	st[10] ^= bc[ 0];
+	st[11] ^= bc[ 1];
+	st[12] ^= bc[ 2];
+	st[13] ^= bc[ 3];
+	st[14] ^= bc[ 4];
+
+	bc[ 0] = ~st[16] & st[17];
+	bc[ 1] = ~st[17] & st[18];
+	bc[ 2] = ~st[18] & st[19];
+	bc[ 3] = ~st[19] & st[15];
+	bc[ 4] = ~st[15] & st[16];
+	st[15] ^= bc[ 0];
+	st[16] ^= bc[ 1];
+	st[17] ^= bc[ 2];
+	st[18] ^= bc[ 3];
+	st[19] ^= bc[ 4];
+
+	bc[ 0] = ~st[21] & st[22];
+	bc[ 1] = ~st[22] & st[23];
+	bc[ 2] = ~st[23] & st[24];
+	bc[ 3] = ~st[24] & st[20];
+	bc[ 4] = ~st[20] & st[21];
+	st[20] ^= bc[ 0];
+	st[21] ^= bc[ 1];
+	st[22] ^= bc[ 2];
+	st[23] ^= bc[ 3];
+	st[24] ^= bc[ 4];
+}
 
-		/* Theta */
-		bc[0] = st[0] ^ st[5] ^ st[10] ^ st[15] ^ st[20];
-		bc[1] = st[1] ^ st[6] ^ st[11] ^ st[16] ^ st[21];
-		bc[2] = st[2] ^ st[7] ^ st[12] ^ st[17] ^ st[22];
-		bc[3] = st[3] ^ st[8] ^ st[13] ^ st[18] ^ st[23];
-		bc[4] = st[4] ^ st[9] ^ st[14] ^ st[19] ^ st[24];
-
-		t[0] = bc[4] ^ rol64(bc[1], 1);
-		t[1] = bc[0] ^ rol64(bc[2], 1);
-		t[2] = bc[1] ^ rol64(bc[3], 1);
-		t[3] = bc[2] ^ rol64(bc[4], 1);
-		t[4] = bc[3] ^ rol64(bc[0], 1);
-
-		st[0] ^= t[0];
-
-		/* Rho Pi */
-		tt = st[1];
-		st[ 1] = rol64(st[ 6] ^ t[1], 44);
-		st[ 6] = rol64(st[ 9] ^ t[4], 20);
-		st[ 9] = rol64(st[22] ^ t[2], 61);
-		st[22] = rol64(st[14] ^ t[4], 39);
-		st[14] = rol64(st[20] ^ t[0], 18);
-		st[20] = rol64(st[ 2] ^ t[2], 62);
-		st[ 2] = rol64(st[12] ^ t[2], 43);
-		st[12] = rol64(st[13] ^ t[3], 25);
-		st[13] = rol64(st[19] ^ t[4],  8);
-		st[19] = rol64(st[23] ^ t[3], 56);
-		st[23] = rol64(st[15] ^ t[0], 41);
-		st[15] = rol64(st[ 4] ^ t[4], 27);
-		st[ 4] = rol64(st[24] ^ t[4], 14);
-		st[24] = rol64(st[21] ^ t[1],  2);
-		st[21] = rol64(st[ 8] ^ t[3], 55);
-		st[ 8] = rol64(st[16] ^ t[1], 45);
-		st[16] = rol64(st[ 5] ^ t[0], 36);
-		st[ 5] = rol64(st[ 3] ^ t[3], 28);
-		st[ 3] = rol64(st[18] ^ t[3], 21);
-		st[18] = rol64(st[17] ^ t[2], 15);
-		st[17] = rol64(st[11] ^ t[1], 10);
-		st[11] = rol64(st[ 7] ^ t[2],  6);
-		st[ 7] = rol64(st[10] ^ t[0],  3);
-		st[10] = rol64(    tt ^ t[1],  1);
-
-		/* Chi */
-		bc[ 0] = ~st[ 1] & st[ 2];
-		bc[ 1] = ~st[ 2] & st[ 3];
-		bc[ 2] = ~st[ 3] & st[ 4];
-		bc[ 3] = ~st[ 4] & st[ 0];
-		bc[ 4] = ~st[ 0] & st[ 1];
-		st[ 0] ^= bc[ 0];
-		st[ 1] ^= bc[ 1];
-		st[ 2] ^= bc[ 2];
-		st[ 3] ^= bc[ 3];
-		st[ 4] ^= bc[ 4];
-
-		bc[ 0] = ~st[ 6] & st[ 7];
-		bc[ 1] = ~st[ 7] & st[ 8];
-		bc[ 2] = ~st[ 8] & st[ 9];
-		bc[ 3] = ~st[ 9] & st[ 5];
-		bc[ 4] = ~st[ 5] & st[ 6];
-		st[ 5] ^= bc[ 0];
-		st[ 6] ^= bc[ 1];
-		st[ 7] ^= bc[ 2];
-		st[ 8] ^= bc[ 3];
-		st[ 9] ^= bc[ 4];
-
-		bc[ 0] = ~st[11] & st[12];
-		bc[ 1] = ~st[12] & st[13];
-		bc[ 2] = ~st[13] & st[14];
-		bc[ 3] = ~st[14] & st[10];
-		bc[ 4] = ~st[10] & st[11];
-		st[10] ^= bc[ 0];
-		st[11] ^= bc[ 1];
-		st[12] ^= bc[ 2];
-		st[13] ^= bc[ 3];
-		st[14] ^= bc[ 4];
-
-		bc[ 0] = ~st[16] & st[17];
-		bc[ 1] = ~st[17] & st[18];
-		bc[ 2] = ~st[18] & st[19];
-		bc[ 3] = ~st[19] & st[15];
-		bc[ 4] = ~st[15] & st[16];
-		st[15] ^= bc[ 0];
-		st[16] ^= bc[ 1];
-		st[17] ^= bc[ 2];
-		st[18] ^= bc[ 3];
-		st[19] ^= bc[ 4];
-
-		bc[ 0] = ~st[21] & st[22];
-		bc[ 1] = ~st[22] & st[23];
-		bc[ 2] = ~st[23] & st[24];
-		bc[ 3] = ~st[24] & st[20];
-		bc[ 4] = ~st[20] & st[21];
-		st[20] ^= bc[ 0];
-		st[21] ^= bc[ 1];
-		st[22] ^= bc[ 2];
-		st[23] ^= bc[ 3];
-		st[24] ^= bc[ 4];
+static void __attribute__((__optimize__("O3"))) keccakf(u64 st[25])
+{
+	int round;
 
+	for (round = 0; round < KECCAK_ROUNDS; round++) {
+		keccakf_round(st);
 		/* Iota */
 		st[0] ^= keccakf_rndc[round];
 	}