diff mbox

[6/8] ARM: ux500: Change the type of interrupt to something compatible

Message ID 1351159031-25391-7-git-send-email-lee.jones@linaro.org
State Accepted
Commit 98c52c7c676b047e67c235616cc3fefad05c04d4
Headers show

Commit Message

Lee Jones Oct. 25, 2012, 9:57 a.m. UTC 
On boot the Nomadik GPIO controller complains that an IRQ can't be
configured as active high level-sensitive, so this patch converts
it to be low-to-high edge triggered instead.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/boot/dts/stuib.dtsi |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/stuib.dtsi b/arch/arm/boot/dts/stuib.dtsi
index 6c7e492..39446a2 100644
--- a/arch/arm/boot/dts/stuib.dtsi
+++ b/arch/arm/boot/dts/stuib.dtsi
@@ -15,7 +15,7 @@ 
 			stmpe1601: stmpe1601@40 {
 				compatible = "st,stmpe1601";
 				reg = <0x40>;
-				interrupts = <26 0x4>;
+				interrupts = <26 0x1>;
 				interrupt-parent = <&gpio6>;
 				interrupt-controller;