| Message ID | 1351159031-25391-6-git-send-email-lee.jones@linaro.org |
|---|---|
| State | Accepted |
| Commit | 0563f638f052185ea45441b5e7ec06a90e4e7837 |
| Headers | show |
diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index 07a085b..536df5d 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -614,5 +614,19 @@ ranges = <0 0x50000000 0x4000000>; status = "disabled"; }; + + vmmci: regulator-gpio { + compatible = "regulator-gpio"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2600000>; + regulator-name = "mmci-reg"; + regulator-type = "voltage"; + + gpios = <&tc3589x_gpio 18 0x4>; + gpio-enable = <&tc3589x_gpio 17 0x4>; + states = <1800000 0x1 + 2900000 0x0>; + }; }; };
There is a very simple mechanism to change and SDI's voltage which consists of toggling some GPIOs. This scenario can be better handled if we convert it to a GPIO regulator. This patch provides one which can be read from Device Tree. Signed-off-by: Lee Jones <lee.jones@linaro.org> --- arch/arm/boot/dts/dbx5x0.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+)