diff mbox series

[v2,09/15] env: Support multiple environments

Message ID 30edd1e4507d3818bd85070502b9a5819d0cdcc0.1516094113.git-series.maxime.ripard@free-electrons.com
State New
Headers show
Series env: Multiple env support and env transition for sunxi | expand

Commit Message

Maxime Ripard Jan. 16, 2018, 9:16 a.m. UTC 
Now that we have everything in place to support multiple environment, let's
make sure the current code can use it.

The priority used between the various environment is the same one that was
used in the code previously.

At read / init times, the highest priority environment is going to be
detected, and we'll use the same one without lookup during writes. This
should implement the same behaviour than we currently have.

Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
 env/env.c | 76 +++++++++++++++++++++++++++++++++++++-------------------
 1 file changed, 51 insertions(+), 25 deletions(-)
diff mbox series

Patch

diff --git a/env/env.c b/env/env.c
index 9dd4d4cb4d11..333fd71aad53 100644
--- a/env/env.c
+++ b/env/env.c
@@ -26,33 +26,59 @@  static struct env_driver *_env_driver_lookup(enum env_location loc)
 	return NULL;
 }
 
+static enum env_location env_locations[] = {
+#ifdef CONFIG_ENV_IS_IN_EEPROM
+	ENVL_EEPROM,
+#endif
+#ifdef CONFIG_ENV_IS_IN_FAT
+	ENVL_FAT,
+#endif
+#ifdef CONFIG_ENV_IS_IN_FLASH
+	ENVL_FLASH,
+#endif
+#ifdef CONFIG_ENV_IS_IN_MMC
+	ENVL_MMC,
+#endif
+#ifdef CONFIG_ENV_IS_IN_NAND
+	ENVL_NAND,
+#endif
+#ifdef CONFIG_ENV_IS_IN_NVRAM
+	ENVL_NVRAM,
+#endif
+#ifdef CONFIG_ENV_IS_IN_REMOTE
+	ENVL_REMOTE,
+#endif
+#ifdef CONFIG_ENV_IS_IN_SPI_FLASH
+	ENVL_SPI_FLASH,
+#endif
+#ifdef CONFIG_ENV_IS_IN_UBI
+	ENVL_UBI,
+#endif
+#ifdef CONFIG_ENV_IS_NOWHERE
+	ENVL_NOWHERE,
+#endif
+	ENVL_UNKNOWN,
+};
+
+static enum env_location env_load_location;
+
 static enum env_location env_get_location(enum env_operation op, int prio)
 {
-	if (prio >= 1)
-		return ENVL_UNKNOWN;
-
-	if IS_ENABLED(CONFIG_ENV_IS_IN_EEPROM)
-		return ENVL_EEPROM;
-	else if IS_ENABLED(CONFIG_ENV_IS_IN_FAT)
-		return ENVL_FAT;
-	else if IS_ENABLED(CONFIG_ENV_IS_IN_FLASH)
-		return ENVL_FLASH;
-	else if IS_ENABLED(CONFIG_ENV_IS_IN_MMC)
-		return ENVL_MMC;
-	else if IS_ENABLED(CONFIG_ENV_IS_IN_NAND)
-		return ENVL_NAND;
-	else if IS_ENABLED(CONFIG_ENV_IS_IN_NVRAM)
-		return ENVL_NVRAM;
-	else if IS_ENABLED(CONFIG_ENV_IS_IN_REMOTE)
-		return ENVL_REMOTE;
-	else if IS_ENABLED(CONFIG_ENV_IS_IN_SPI_FLASH)
-		return ENVL_SPI_FLASH;
-	else if IS_ENABLED(CONFIG_ENV_IS_IN_UBI)
-		return ENVL_UBI;
-	else if IS_ENABLED(CONFIG_ENV_IS_NOWHERE)
-		return ENVL_NOWHERE;
-	else
-		return ENVL_UNKNOWN;
+	switch (op) {
+	case ENVOP_GET_CHAR:
+	case ENVOP_INIT:
+	case ENVOP_LOAD:
+		if (prio >= ARRAY_SIZE(env_locations))
+			return -ENODEV;
+
+		env_load_location = env_locations[prio];
+		return env_load_location;
+
+	case ENVOP_SAVE:
+		return env_load_location;
+	}
+
+	return ENVL_UNKNOWN;
 }