diff mbox series

[[PATCH,v2] 1/8] sunxi: h3: Sync OTG and HCI nodes from Linux DT

Message ID 1515168960-18960-2-git-send-email-jun.nie@linaro.org
State Superseded
Headers show
Series [[PATCH,v2] 1/8] sunxi: h3: Sync OTG and HCI nodes from Linux DT | expand

Commit Message

Jun Nie Jan. 5, 2018, 4:15 p.m. UTC 
Allwinner H3 have a dual-routed USB PHY0 -- routed to either OHCI/EHCI
or MUSB controller.

Signed-off-by: Jun Nie <jun.nie@linaro.org>
---
 arch/arm/dts/sun8i-h3.dtsi | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

Comments

Jagan Teki Jan. 25, 2018, 12:04 p.m. UTC | #1 
On Fri, Jan 5, 2018 at 9:45 PM, Jun Nie <jun.nie@linaro.org> wrote:
> Allwinner H3 have a dual-routed USB PHY0 -- routed to either OHCI/EHCI
> or MUSB controller.
>
> Signed-off-by: Jun Nie <jun.nie@linaro.org>
> ---

Reviewed-by: Jagan Teki <jagan@openedev.com>
diff mbox series

Patch

diff --git a/arch/arm/dts/sun8i-h3.dtsi b/arch/arm/dts/sun8i-h3.dtsi
index afa6079..d9728a7 100644
--- a/arch/arm/dts/sun8i-h3.dtsi
+++ b/arch/arm/dts/sun8i-h3.dtsi
@@ -218,6 +218,19 @@ 
 			#size-cells = <0>;
 		};
 
+		usb_otg: usb@1c19000 {
+			compatible = "allwinner,sun8i-h3-musb";
+			reg = <0x01c19000 0x400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			status = "disabled";
+		};
+
 		usbphy: phy@01c19400 {
 			compatible = "allwinner,sun8i-h3-usb-phy";
 			reg = <0x01c19400 0x2c>,
@@ -250,6 +263,25 @@ 
 			#phy-cells = <1>;
 		};
 
+		ehci0: usb@1c1a000 {
+			compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
+			reg = <0x01c1a000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>;
+			resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
+			status = "disabled";
+		};
+
+		ohci0: usb@1c1a400 {
+			compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
+			reg = <0x01c1a400 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
+			status = "disabled";
+		};
+
 		ehci1: usb@01c1b000 {
 			compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
 			reg = <0x01c1b000 0x100>;