@@ -25,8 +25,9 @@
status = "okay";
};
};
+};
- soc {
+&soc0 {
clocks {
refclksys: refclksys {
@@ -50,7 +51,6 @@
clock-output-names = "refclk-ddr3a";
};
};
- };
};
&usb_phy {
@@ -45,8 +45,9 @@
aliases {
rproc0 = &dsp0;
};
+};
- soc {
+&soc0 {
/include/ "keystone-k2e-clocks.dtsi"
usb: usb@2680000 {
@@ -191,5 +192,4 @@
bus_freq = <2500000>;
};
/include/ "keystone-k2e-netcp.dtsi"
- };
};
@@ -67,7 +67,7 @@
interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
};
- soc {
+ soc0: soc@0 {
#address-cells = <1>;
#size-cells = <1>;
#pinctrl-cells = <1>;
@@ -26,7 +26,31 @@
};
};
- soc {
+ leds {
+ compatible = "gpio-leds";
+ debug1_1 {
+ label = "keystone:green:debug1";
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; /* 12 */
+ };
+
+ debug1_2 {
+ label = "keystone:red:debug1";
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; /* 13 */
+ };
+
+ debug2 {
+ label = "keystone:blue:debug2";
+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; /* 14 */
+ };
+
+ debug3 {
+ label = "keystone:blue:debug3";
+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; /* 15 */
+ };
+ };
+};
+
+&soc0 {
clocks {
refclksys: refclksys {
#clock-cells = <0>;
@@ -63,30 +87,6 @@
clock-output-names = "refclk-ddr3b";
};
};
- };
-
- leds {
- compatible = "gpio-leds";
- debug1_1 {
- label = "keystone:green:debug1";
- gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; /* 12 */
- };
-
- debug1_2 {
- label = "keystone:red:debug1";
- gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; /* 13 */
- };
-
- debug2 {
- label = "keystone:blue:debug2";
- gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; /* 14 */
- };
-
- debug3 {
- label = "keystone:blue:debug3";
- gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; /* 15 */
- };
- };
};
&usb_phy {
@@ -52,8 +52,9 @@
rproc6 = &dsp6;
rproc7 = &dsp7;
};
+};
- soc {
+&soc0 {
/include/ "keystone-k2hk-clocks.dtsi"
msm_ram: msmram@c000000 {
@@ -281,5 +282,4 @@
bus_freq = <2500000>;
};
/include/ "keystone-k2hk-netcp.dtsi"
- };
};
@@ -25,8 +25,9 @@
status = "okay";
};
};
+};
- soc {
+&soc0 {
clocks {
refclksys: refclksys {
#clock-cells = <0>;
@@ -35,7 +36,6 @@
clock-output-names = "refclk-sys";
};
};
- };
};
&usb_phy {
@@ -36,8 +36,9 @@
rproc2 = &dsp2;
rproc3 = &dsp3;
};
+};
- soc {
+&soc0 {
/include/ "keystone-k2l-clocks.dtsi"
uart2: serial@2348400 {
@@ -347,7 +348,6 @@
bus_freq = <2500000>;
};
/include/ "keystone-k2l-netcp.dtsi"
- };
};
&spi0 {
@@ -67,7 +67,7 @@
cpu_on = <0x84000003>;
};
- soc {
+ soc0: soc@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "ti,keystone","simple-bus";
Provide and soc0 node and reference the same to simplify dts. This also resolves the following warnings when built with W=1: arch/arm/boot/dts/keystone-k2hk-evm.dtb: Warning (unit_address_vs_reg): Node /soc has a reg or ranges property, but no unit name arch/arm/boot/dts/keystone-k2l-evm.dtb: Warning (unit_address_vs_reg): Node /soc has a reg or ranges property, but no unit name arch/arm/boot/dts/keystone-k2e-evm.dtb: Warning (unit_address_vs_reg): Node /soc has a reg or ranges property, but no unit name arch/arm/boot/dts/keystone-k2g-evm.dtb: Warning (unit_address_vs_reg): Node /soc has a reg or ranges property, but no unit name arch/arm/boot/dts/keystone-k2g-ice.dtb: Warning (unit_address_vs_reg): Node /soc has a reg or ranges property, but no unit name NOTE: Though we can reformat files by reducing 1 level of indent due to the use of soc0 phandle, we ommit that change to prevent un-necessary churn in code base. Reported-by: Rob Herring <robh@kernel.org> Signed-off-by: Nishanth Menon <nm@ti.com> --- arch/arm/boot/dts/keystone-k2e-evm.dts | 4 +-- arch/arm/boot/dts/keystone-k2e.dtsi | 4 +-- arch/arm/boot/dts/keystone-k2g.dtsi | 2 +- arch/arm/boot/dts/keystone-k2hk-evm.dts | 50 ++++++++++++++++----------------- arch/arm/boot/dts/keystone-k2hk.dtsi | 4 +-- arch/arm/boot/dts/keystone-k2l-evm.dts | 4 +-- arch/arm/boot/dts/keystone-k2l.dtsi | 4 +-- arch/arm/boot/dts/keystone.dtsi | 2 +- 8 files changed, 37 insertions(+), 37 deletions(-) -- 2.14.1