@@ -1732,7 +1732,8 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
__func__, buf);
read_retry:
- chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
+ if (nand_standard_page_accessors(&chip->ecc))
+ chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
/*
* Now read the page into the buffer. Absent an error,
@@ -2423,7 +2424,8 @@ static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
else
subpage = 0;
- chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page);
+ if (nand_standard_page_accessors(&chip->ecc))
+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page);
if (unlikely(raw))
status = chip->ecc.write_page_raw(mtd, chip, buf,
@@ -2446,7 +2448,8 @@ static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
if (!cached || !NAND_HAS_CACHEPROG(chip)) {
- chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+ if (nand_standard_page_accessors(&chip->ecc))
+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
status = chip->waitfunc(mtd, chip);
/*
* See if operation failed and additional status checks are
@@ -4126,6 +4129,26 @@ static bool nand_ecc_strength_good(struct mtd_info *mtd)
return corr >= ds_corr && ecc->strength >= chip->ecc_strength_ds;
}
+static bool invalid_ecc_page_accessors(struct nand_chip *chip)
+{
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+
+ if (nand_standard_page_accessors(ecc))
+ return false;
+
+ /*
+ * NAND_ECC_CUSTOM_PAGE_ACCESS flag is set, make sure the NAND
+ * controller driver implements all the page accessors because
+ * default helpers are not suitable when the core does not
+ * send the READ0/PAGEPROG commands.
+ */
+ return (!ecc->read_page || !ecc->write_page ||
+ !ecc->read_page_raw || !ecc->write_page_raw ||
+ (NAND_HAS_SUBPAGE_READ(chip) && !ecc->read_subpage) ||
+ (NAND_HAS_SUBPAGE_WRITE(chip) && !ecc->write_subpage &&
+ ecc->hwctl && ecc->calculate));
+}
+
/**
* nand_scan_tail - [NAND Interface] Scan for the NAND device
* @mtd: MTD device structure
@@ -4145,6 +4168,11 @@ int nand_scan_tail(struct mtd_info *mtd)
BUG_ON((chip->bbt_options & NAND_BBT_NO_OOB_BBM) &&
!(chip->bbt_options & NAND_BBT_USE_FLASH));
+ if (invalid_ecc_page_accessors(chip)) {
+ pr_err("Invalid ECC page accessors setup\n");
+ return -EINVAL;
+ }
+
if (!(chip->options & NAND_OWN_BUFFERS)) {
nbuf = kzalloc(sizeof(struct nand_buffers), GFP_KERNEL);
chip->buffers = nbuf;
@@ -154,6 +154,12 @@ typedef enum {
*/
#define NAND_ECC_GENERIC_ERASED_CHECK BIT(0)
#define NAND_ECC_MAXIMIZE BIT(1)
+/*
+ * If your controller already sends the required NAND commands when
+ * reading or writing a page, then the framework is not supposed to
+ * send READ0 and SEQIN/PAGEPROG respectively.
+ */
+#define NAND_ECC_CUSTOM_PAGE_ACCESS BIT(2)
/* Bit mask for flags passed to do_nand_read_ecc */
#define NAND_GET_DEVICE 0x80
@@ -202,6 +208,7 @@ typedef enum {
/* Macros to identify the above */
#define NAND_HAS_CACHEPROG(chip) ((chip->options & NAND_CACHEPRG))
#define NAND_HAS_SUBPAGE_READ(chip) ((chip->options & NAND_SUBPAGE_READ))
+#define NAND_HAS_SUBPAGE_WRITE(chip) !((chip)->options & NAND_NO_SUBPAGE_WRITE)
/* Non chip related options */
/* This option skips the bbt scan during initialization. */
@@ -568,6 +575,11 @@ struct nand_ecc_ctrl {
int page);
};
+static inline int nand_standard_page_accessors(struct nand_ecc_ctrl *ecc)
+{
+ return !(ecc->options & NAND_ECC_CUSTOM_PAGE_ACCESS);
+}
+
/**
* struct nand_buffers - buffer structure for read/write
* @ecccalc: buffer pointer for calculated ECC, size is oobsize.