diff mbox

[55/57] power: ab8500_charger: Add UsbLineCtrl2 reference

Message ID 1348776554-10019-56-git-send-email-mathieu.poirier@linaro.org
State New
Headers show

Commit Message

Mathieu Poirier Sept. 27, 2012, 8:09 p.m. UTC 
From: Marcus Cooper <marcus.xm.cooper@stericsson.com>

When the state of USB Charge detection is changed then the calls
use a define for another register in other bank. This change
creates a new define for the correct register and removes the
magic numbers that are present.

Signed-off-by: Marcus Cooper <marcus.xm.cooper@stericsson.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Hakan BERG <hakan.berg@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>

Conflicts:

	drivers/power/ab8500_charger.c
---
 drivers/power/ab8500_charger.c       |   11 +++++------
 include/linux/mfd/abx500/ab8500-bm.h |    1 +
 2 files changed, 6 insertions(+), 6 deletions(-)
diff mbox

Patch

diff --git a/drivers/power/ab8500_charger.c b/drivers/power/ab8500_charger.c
index 7f8f362..afb4fda 100644
--- a/drivers/power/ab8500_charger.c
+++ b/drivers/power/ab8500_charger.c
@@ -51,6 +51,7 @@ 
 #define VBUS_DET_DBNC1			0x01
 #define OTP_ENABLE_WD			0x01
 #define DROP_COUNT_RESET		0x01
+#define USB_CH_DET			0x01
 
 #define MAIN_CH_INPUT_CURR_SHIFT	4
 #define VBUS_IN_CURR_LIM_SHIFT		4
@@ -2287,9 +2288,8 @@  static void ab8500_charger_usb_link_status_work(struct work_struct *work)
 					USB_CH_ENA, USB_CH_ENA);
 			/*Enable charger detection*/
 			abx500_mask_and_set_register_interruptible(di->dev,
-						AB8500_USB,
-						AB8500_MCH_IPT_CURLVL_REG,
-						0x01, 0x01);
+					AB8500_USB, AB8500_USB_LINE_CTRL2_REG,
+					USB_CH_DET, USB_CH_DET);
 			di->invalid_charger_detect_state = 1;
 			/*exit and wait for new link status interrupt.*/
 			return;
@@ -2300,9 +2300,8 @@  static void ab8500_charger_usb_link_status_work(struct work_struct *work)
 				"Invalid charger detected, state= 1\n");
 			/*Stop charger detection*/
 			abx500_mask_and_set_register_interruptible(di->dev,
-						AB8500_USB,
-						AB8500_MCH_IPT_CURLVL_REG,
-						0x01, 0x00);
+					AB8500_USB, AB8500_USB_LINE_CTRL2_REG,
+					USB_CH_DET, 0x00);
 			/*Check link status*/
 			if (is_ab8500(di->parent))
 				ret = abx500_get_register_interruptible(di->dev,
diff --git a/include/linux/mfd/abx500/ab8500-bm.h b/include/linux/mfd/abx500/ab8500-bm.h
index 721bd6d..6b69ad5 100644
--- a/include/linux/mfd/abx500/ab8500-bm.h
+++ b/include/linux/mfd/abx500/ab8500-bm.h
@@ -23,6 +23,7 @@ 
  * Bank : 0x5
  */
 #define AB8500_USB_LINE_STAT_REG	0x80
+#define AB8500_USB_LINE_CTRL2_REG	0x82
 #define AB8500_USB_LINK1_STAT_REG	0x94
 
 /*