diff mbox series

[v2] iio: adc: aspeed: Deassert reset in probe

Message ID 20171031021203.18248-1-joel@jms.id.au
State Accepted
Commit edf7550a1f93a88be2bf743b5d352b278d1b789c
Headers show
Series [v2] iio: adc: aspeed: Deassert reset in probe | expand

Commit Message

Joel Stanley Oct. 31, 2017, 2:12 a.m. UTC
The ASPEED SoC must deassert a reset in order to use the ADC peripheral.

The device tree bindings are updated to document the resets phandle, and
the example is updated to match what is expected for both the reset and
clock phandle. Note that the bindings should have always had the reset
controller, as the hardware is unusable without it.

Signed-off-by: Joel Stanley <joel@jms.id.au>

---
v2:
 - Ensure disabling path unwinds in opposite order as the enable path
 - Note that the bindings were incorrect without the reset phandle,
 and for the system to be usable we must update them. No one was
 (successfully) using these bindings/driver before without out of tree
 hacks in mach-aspeed, as it would not have worked.

 .../devicetree/bindings/iio/adc/aspeed_adc.txt     |  4 +++-
 drivers/iio/adc/aspeed_adc.c                       | 25 ++++++++++++++++------
 2 files changed, 22 insertions(+), 7 deletions(-)

-- 
2.14.1

Comments

Rob Herring Nov. 1, 2017, 9:54 p.m. UTC | #1
On Tue, Oct 31, 2017 at 12:42:03PM +1030, Joel Stanley wrote:
> The ASPEED SoC must deassert a reset in order to use the ADC peripheral.

> 

> The device tree bindings are updated to document the resets phandle, and

> the example is updated to match what is expected for both the reset and

> clock phandle. Note that the bindings should have always had the reset

> controller, as the hardware is unusable without it.

> 

> Signed-off-by: Joel Stanley <joel@jms.id.au>

> ---

> v2:

>  - Ensure disabling path unwinds in opposite order as the enable path

>  - Note that the bindings were incorrect without the reset phandle,

>  and for the system to be usable we must update them. No one was

>  (successfully) using these bindings/driver before without out of tree

>  hacks in mach-aspeed, as it would not have worked.

> 

>  .../devicetree/bindings/iio/adc/aspeed_adc.txt     |  4 +++-

>  drivers/iio/adc/aspeed_adc.c                       | 25 ++++++++++++++++------

>  2 files changed, 22 insertions(+), 7 deletions(-)


Acked-by: Rob Herring <robh@kernel.org>
Jonathan Cameron Nov. 2, 2017, 2:49 p.m. UTC | #2
On Wed, 1 Nov 2017 10:15:32 +1030
Joel Stanley <joel@jms.id.au> wrote:

> On Tue, Oct 31, 2017 at 10:28 PM, Philipp Zabel

> <philipp.zabel@gmail.com> wrote:

> > On Tue, Oct 31, 2017 at 3:12 AM, Joel Stanley <joel@jms.id.au>

> > wrote:  

> >> The ASPEED SoC must deassert a reset in order to use the ADC

> >> peripheral.

> >>

> >> The device tree bindings are updated to document the resets

> >> phandle, and the example is updated to match what is expected for

> >> both the reset and clock phandle. Note that the bindings should

> >> have always had the reset controller, as the hardware is unusable

> >> without it.

> >>

> >> Signed-off-by: Joel Stanley <joel@jms.id.au>  

> >

> > It is unfortunate that this has to break DT (theoretical) backwards

> > compatibility, but given that the old bindings never worked,

> > this is better than to pretend a required reset is optional.

> >

> > Reviewed-by: Philipp Zabel <philipp.zabel@gmail.com>  

> 

> Thanks. I agree that it's unfortunate; this has been my first time

> working on an ARM SoC and there were few things we could have done

> better in hindsight.

> 

> I've got similar patches for the ASPEED hwmon pwm/tach driver, and the

> i2c driver that I'll send out now.

> 

> Thanks for the review.

> 

> Cheers,

> 

> Joel

Hi Joel,

IIO is closed for this cycle anyway now.
Otherwise, series looks good.

Will pick up when back with my main PC as traveling for this week and
next.

Thanks,

Jonathan
> --

> To unsubscribe from this list: send the line "unsubscribe linux-iio"

> in the body of a message to majordomo@vger.kernel.org

> More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/iio/adc/aspeed_adc.txt b/Documentation/devicetree/bindings/iio/adc/aspeed_adc.txt
index 674e133b7cd7..034fc2ba100e 100644
--- a/Documentation/devicetree/bindings/iio/adc/aspeed_adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/aspeed_adc.txt
@@ -8,6 +8,7 @@  Required properties:
 - reg: memory window mapping address and length
 - clocks: Input clock used to derive the sample clock. Expected to be the
           SoC's APB clock.
+- resets: Reset controller phandle
 - #io-channel-cells: Must be set to <1> to indicate channels are selected
                      by index.
 
@@ -15,6 +16,7 @@  Example:
 	adc@1e6e9000 {
 		compatible = "aspeed,ast2400-adc";
 		reg = <0x1e6e9000 0xb0>;
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_ADC>;
 		#io-channel-cells = <1>;
 	};
diff --git a/drivers/iio/adc/aspeed_adc.c b/drivers/iio/adc/aspeed_adc.c
index 8a958d5f1905..327a49ba1991 100644
--- a/drivers/iio/adc/aspeed_adc.c
+++ b/drivers/iio/adc/aspeed_adc.c
@@ -17,6 +17,7 @@ 
 #include <linux/module.h>
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
+#include <linux/reset.h>
 #include <linux/spinlock.h>
 #include <linux/types.h>
 
@@ -53,11 +54,12 @@  struct aspeed_adc_model_data {
 };
 
 struct aspeed_adc_data {
-	struct device	*dev;
-	void __iomem	*base;
-	spinlock_t	clk_lock;
-	struct clk_hw	*clk_prescaler;
-	struct clk_hw	*clk_scaler;
+	struct device		*dev;
+	void __iomem		*base;
+	spinlock_t		clk_lock;
+	struct clk_hw		*clk_prescaler;
+	struct clk_hw		*clk_scaler;
+	struct reset_control	*rst;
 };
 
 #define ASPEED_CHAN(_idx, _data_reg_addr) {			\
@@ -217,6 +219,15 @@  static int aspeed_adc_probe(struct platform_device *pdev)
 		goto scaler_error;
 	}
 
+	data->rst = devm_reset_control_get_exclusive(&pdev->dev, NULL);
+	if (IS_ERR(data->rst)) {
+		dev_err(&pdev->dev,
+			"invalid or missing reset controller device tree entry");
+		ret = PTR_ERR(data->rst);
+		goto reset_error;
+	}
+	reset_control_deassert(data->rst);
+
 	model_data = of_device_get_match_data(&pdev->dev);
 
 	if (model_data->wait_init_sequence) {
@@ -263,9 +274,10 @@  static int aspeed_adc_probe(struct platform_device *pdev)
 	writel(ASPEED_OPERATION_MODE_POWER_DOWN,
 		data->base + ASPEED_REG_ENGINE_CONTROL);
 	clk_disable_unprepare(data->clk_scaler->clk);
+reset_error:
+	reset_control_assert(data->rst);
 clk_enable_error:
 	clk_hw_unregister_divider(data->clk_scaler);
-
 scaler_error:
 	clk_hw_unregister_divider(data->clk_prescaler);
 	return ret;
@@ -280,6 +292,7 @@  static int aspeed_adc_remove(struct platform_device *pdev)
 	writel(ASPEED_OPERATION_MODE_POWER_DOWN,
 		data->base + ASPEED_REG_ENGINE_CONTROL);
 	clk_disable_unprepare(data->clk_scaler->clk);
+	reset_control_assert(data->rst);
 	clk_hw_unregister_divider(data->clk_scaler);
 	clk_hw_unregister_divider(data->clk_prescaler);