@@ -377,6 +377,10 @@ typedef struct disassemble_info {
/* Command line options specific to the target disassembler. */
char * disassembler_options;
+ /* Options for Capstone disassembly. */
+ int cap_arch;
+ int cap_mode;
+
} disassemble_info;
new file mode 100644
@@ -0,0 +1,38 @@
+#ifndef QEMU_CAPSTONE_H
+#define QEMU_CAPSTONE_H 1
+
+#ifdef CONFIG_CAPSTONE
+
+#include <capstone.h>
+
+#else
+
+/* Just enough to allow backends to init without ifdefs. */
+
+#define CS_ARCH_ARM -1
+#define CS_ARCH_ARM64 -1
+#define CS_ARCH_MIPS -1
+#define CS_ARCH_X86 -1
+#define CS_ARCH_PPC -1
+#define CS_ARCH_SPARC -1
+#define CS_ARCH_SYSZ -1
+
+#define CS_MODE_LITTLE_ENDIAN 0
+#define CS_MODE_BIG_ENDIAN 0
+#define CS_MODE_ARM 0
+#define CS_MODE_16 0
+#define CS_MODE_32 0
+#define CS_MODE_64 0
+#define CS_MODE_THUMB 0
+#define CS_MODE_MCLASS 0
+#define CS_MODE_V8 0
+#define CS_MODE_MICRO 0
+#define CS_MODE_MIPS3 0
+#define CS_MODE_MIPS32R6 0
+#define CS_MODE_MIPSGP64 0
+#define CS_MODE_V9 0
+#define CS_MODE_MIPS32 0
+#define CS_MODE_MIPS64 0
+
+#endif /* CONFIG_CAPSTONE */
+#endif /* QEMU_CAPSTONE_H */
@@ -6,6 +6,7 @@
#include "cpu.h"
#include "disas/disas.h"
+#include "disas/capstone.h"
typedef struct CPUDebug {
struct disassemble_info info;
@@ -171,6 +172,192 @@ static int print_insn_od_target(bfd_vma pc, disassemble_info *info)
return print_insn_objdump(pc, info, "OBJD-T");
}
+#ifdef CONFIG_CAPSTONE
+/* Temporary storage for the capstone library. This will be alloced via
+ malloc with a size private to the library; thus there's no reason not
+ to share this across calls and across host vs target disassembly. */
+static __thread cs_insn *cap_insn;
+
+/* Initialize the Capstone library. */
+/* ??? It would be nice to cache this. We would need one handle for the
+ host and one for the target. For most targets we can reset specific
+ parameters via cs_option(CS_OPT_MODE, new_mode), but we cannot change
+ CS_ARCH_* in this way. Thus we would need to be able to close and
+ re-open the target handle with a different arch for the target in order
+ to handle AArch64 vs AArch32 mode switching. */
+static cs_err cap_disas_start(disassemble_info *info, csh *handle)
+{
+ cs_mode cap_mode = info->cap_mode;
+ cs_err err;
+
+ cap_mode += (info->endian == BFD_ENDIAN_BIG ? CS_MODE_BIG_ENDIAN
+ : CS_MODE_LITTLE_ENDIAN);
+
+ err = cs_open(info->cap_arch, cap_mode, handle);
+ if (err != CS_ERR_OK) {
+ return err;
+ }
+
+ /* ??? There probably ought to be a better place to put this. */
+ if (info->cap_arch == CS_ARCH_X86) {
+ /* We don't care about errors (if for some reason the library
+ is compiled without AT&T syntax); the user will just have
+ to deal with the Intel syntax. */
+ cs_option(*handle, CS_OPT_SYNTAX, CS_OPT_SYNTAX_ATT);
+ }
+
+ /* "Disassemble" unknown insns as ".byte W,X,Y,Z". */
+ cs_option(*handle, CS_OPT_SKIPDATA, CS_OPT_ON);
+
+ /* Allocate temp space for cs_disasm_iter. */
+ if (cap_insn == NULL) {
+ cap_insn = cs_malloc(*handle);
+ if (cap_insn == NULL) {
+ cs_close(handle);
+ return CS_ERR_MEM;
+ }
+ }
+ return CS_ERR_OK;
+}
+
+/* Disassemble SIZE bytes at PC for the target. */
+static bool cap_disas_target(disassemble_info *info, uint64_t pc, size_t size)
+{
+ uint8_t cap_buf[1024];
+ csh handle;
+ cs_insn *insn;
+ size_t csize = 0;
+
+ if (cap_disas_start(info, &handle) != CS_ERR_OK) {
+ return false;
+ }
+ insn = cap_insn;
+
+ while (1) {
+ size_t tsize = MIN(sizeof(cap_buf) - csize, size);
+ const uint8_t *cbuf = cap_buf;
+
+ target_read_memory(pc + csize, cap_buf + csize, tsize, info);
+ csize += tsize;
+ size -= tsize;
+
+ while (cs_disasm_iter(handle, &cbuf, &csize, &pc, insn)) {
+ (*info->fprintf_func)(info->stream,
+ "0x%08" PRIx64 ": %-12s %s\n",
+ insn->address, insn->mnemonic,
+ insn->op_str);
+ }
+
+ /* If the target memory is not consumed, go back for more... */
+ if (size != 0) {
+ /* ... taking care to move any remaining fractional insn
+ to the beginning of the buffer. */
+ if (csize != 0) {
+ memmove(cap_buf, cbuf, csize);
+ }
+ continue;
+ }
+
+ /* Since the target memory is consumed, we should not have
+ a remaining fractional insn. */
+ if (csize != 0) {
+ (*info->fprintf_func)(info->stream,
+ "Disassembler disagrees with translator "
+ "over instruction decoding\n"
+ "Please report this to qemu-devel@nongnu.org\n");
+ }
+ break;
+ }
+
+ cs_close(&handle);
+ return true;
+}
+
+/* Disassemble SIZE bytes at CODE for the host. */
+static bool cap_disas_host(disassemble_info *info, void *code, size_t size)
+{
+ csh handle;
+ const uint8_t *cbuf;
+ cs_insn *insn;
+ uint64_t pc;
+
+ if (cap_disas_start(info, &handle) != CS_ERR_OK) {
+ return false;
+ }
+ insn = cap_insn;
+
+ cbuf = code;
+ pc = (uintptr_t)code;
+
+ while (cs_disasm_iter(handle, &cbuf, &size, &pc, insn)) {
+ (*info->fprintf_func)(info->stream,
+ "0x%08" PRIx64 ": %-12s %s\n",
+ insn->address, insn->mnemonic,
+ insn->op_str);
+ }
+ if (size != 0) {
+ (*info->fprintf_func)(info->stream,
+ "Disassembler disagrees with TCG over instruction encoding\n"
+ "Please report this to qemu-devel@nongnu.org\n");
+ }
+
+ cs_close(&handle);
+ return true;
+}
+
+#if !defined(CONFIG_USER_ONLY)
+/* Disassemble COUNT insns at PC for the target. */
+static bool cap_disas_monitor(disassemble_info *info, uint64_t pc, int count)
+{
+ uint8_t cap_buf[32];
+ csh handle;
+ cs_insn *insn;
+ size_t csize = 0;
+
+ if (cap_disas_start(info, &handle) != CS_ERR_OK) {
+ return false;
+ }
+ insn = cap_insn;
+
+ while (1) {
+ /* We want to read memory for one insn, but generically we do not
+ know how much memory that is. We have a small buffer which is
+ known to be sufficient for all supported targets. Try to not
+ read beyond the page, Just In Case. For even more simplicity,
+ ignore the actual target page size and use a 1k boundary. If
+ that turns out to be insufficient, we'll come back around the
+ loop and read more. */
+ uint64_t epc = QEMU_ALIGN_UP(pc + csize + 1, 1024);
+ size_t tsize = MIN(sizeof(cap_buf) - csize, epc - pc);
+ const uint8_t *cbuf = cap_buf;
+
+ /* Make certain that we can make progress. */
+ assert(tsize != 0);
+ info->read_memory_func(pc, cap_buf + csize, tsize, info);
+ csize += tsize;
+
+ if (cs_disasm_iter(handle, &cbuf, &csize, &pc, insn)) {
+ (*info->fprintf_func)(info->stream,
+ "0x%08" PRIx64 ": %-12s %s\n",
+ insn->address, insn->mnemonic,
+ insn->op_str);
+ if (--count <= 0) {
+ break;
+ }
+ }
+ memmove(cap_buf, cbuf, csize);
+ }
+
+ cs_close(&handle);
+ return true;
+}
+#endif /* !CONFIG_USER_ONLY */
+#else
+# define cap_disas_target(i, p, s) false
+# define cap_disas_host(i, p, s) false
+# define cap_disas_monitor(i, p, c) false
+#endif /* CONFIG_CAPSTONE */
+
/* Disassemble this for me please... (debugging). */
void target_disas(FILE *out, CPUState *cpu, target_ulong code,
target_ulong size)
@@ -187,6 +374,8 @@ void target_disas(FILE *out, CPUState *cpu, target_ulong code,
s.info.buffer_vma = code;
s.info.buffer_length = size;
s.info.print_address_func = generic_print_address;
+ s.info.cap_arch = -1;
+ s.info.cap_mode = 0;
#ifdef TARGET_WORDS_BIGENDIAN
s.info.endian = BFD_ENDIAN_BIG;
@@ -198,6 +387,10 @@ void target_disas(FILE *out, CPUState *cpu, target_ulong code,
cc->disas_set_info(cpu, &s.info);
}
+ if (s.info.cap_arch >= 0 && cap_disas_target(&s.info, code, size)) {
+ return;
+ }
+
if (s.info.print_insn == NULL) {
s.info.print_insn = print_insn_od_target;
}
@@ -205,18 +398,6 @@ void target_disas(FILE *out, CPUState *cpu, target_ulong code,
for (pc = code; size > 0; pc += count, size -= count) {
fprintf(out, "0x" TARGET_FMT_lx ": ", pc);
count = s.info.print_insn(pc, &s.info);
-#if 0
- {
- int i;
- uint8_t b;
- fprintf(out, " {");
- for(i = 0; i < count; i++) {
- target_read_memory(pc + i, &b, 1, &s.info);
- fprintf(out, " %02x", b);
- }
- fprintf(out, " }");
- }
-#endif
fprintf(out, "\n");
if (count < 0)
break;
@@ -244,6 +425,8 @@ void disas(FILE *out, void *code, unsigned long size)
s.info.buffer = code;
s.info.buffer_vma = (uintptr_t)code;
s.info.buffer_length = size;
+ s.info.cap_arch = -1;
+ s.info.cap_mode = 0;
#ifdef HOST_WORDS_BIGENDIAN
s.info.endian = BFD_ENDIAN_BIG;
@@ -281,6 +464,11 @@ void disas(FILE *out, void *code, unsigned long size)
#elif defined(__hppa__)
print_insn = print_insn_hppa;
#endif
+
+ if (s.info.cap_arch >= 0 && cap_disas_host(&s.info, code, size)) {
+ return;
+ }
+
if (print_insn == NULL) {
print_insn = print_insn_od_host;
}
@@ -343,8 +531,9 @@ void monitor_disas(Monitor *mon, CPUState *cpu,
monitor_disas_is_physical = is_physical;
s.info.read_memory_func = monitor_read_memory;
s.info.print_address_func = generic_print_address;
-
s.info.buffer_vma = pc;
+ s.info.cap_arch = -1;
+ s.info.cap_mode = 0;
#ifdef TARGET_WORDS_BIGENDIAN
s.info.endian = BFD_ENDIAN_BIG;
@@ -356,6 +545,10 @@ void monitor_disas(Monitor *mon, CPUState *cpu,
cc->disas_set_info(cpu, &s.info);
}
+ if (s.info.cap_arch >= 0 && cap_disas_monitor(&s.info, pc, nb_insn)) {
+ return;
+ }
+
if (!s.info.print_insn) {
monitor_printf(mon, "0x" TARGET_FMT_lx
": Asm output not supported on this arch\n", pc);
@@ -375,6 +375,7 @@ opengl_dmabuf="no"
cpuid_h="no"
avx2_opt="no"
zlib="yes"
+capstone=""
lzo=""
snappy=""
bzip2=""
@@ -1294,6 +1295,10 @@ for opt do
error_exit "vhost-user isn't available on win32"
fi
;;
+ --disable-capstone) capstone="no"
+ ;;
+ --enable-capstone) capstone="yes"
+ ;;
*)
echo "ERROR: unknown option $opt"
echo "Try '$0 --help' for more information"
@@ -1541,6 +1546,7 @@ disabled with --disable-FEATURE, default is enabled if available:
vxhs Veritas HyperScale vDisk backend support
crypto-afalg Linux AF_ALG crypto backend driver
vhost-user vhost-user support
+ capstone capstone disassembler support
NOTE: The object files are built at the place where configure is launched
EOF
@@ -4411,6 +4417,22 @@ EOF
fi
##########################################
+# capstone
+
+if test "$capstone" != no; then
+ if $pkg_config capstone; then
+ capstone=yes
+ QEMU_CFLAGS="$QEMU_CFLAGS $($pkg_config --cflags capstone)"
+ LIBS="$($pkg_config --libs capstone) $LIBS"
+ else
+ if test "$capstone" = yes; then
+ feature_not_found capstone
+ fi
+ capstone=no
+ fi
+fi
+
+##########################################
# check if we have fdatasync
fdatasync=no
@@ -5468,6 +5490,7 @@ echo "jemalloc support $jemalloc"
echo "avx2 optimization $avx2_opt"
echo "replication support $replication"
echo "VxHS block device $vxhs"
+echo "capstone $capstone"
if test "$sdl_too_old" = "yes"; then
echo "-> Your SDL version is too old - please upgrade to have SDL support"
@@ -6142,6 +6165,9 @@ fi
if test "$ivshmem" = "yes" ; then
echo "CONFIG_IVSHMEM=y" >> $config_host_mak
fi
+if test "$capstone" = "yes" ; then
+ echo "CONFIG_CAPSTONE=y" >> $config_host_mak
+fi
# Hold two types of flag:
# CONFIG_THREAD_SETNAME_BYTHREAD - we've got a way of setting the name on