@@ -33,19 +33,19 @@
.endif
.endm
- .macro __load, out, in, idx
+ .macro __load, out, in, idx, sz, op
.if __LINUX_ARM_ARCH__ < 7 && \idx > 0
- ldr \out, [ttab, \in, lsr #(8 * \idx) - 2]
+ ldr\op \out, [ttab, \in, lsr #(8 * \idx) - \sz]
.else
- ldr \out, [ttab, \in, lsl #2]
+ ldr\op \out, [ttab, \in, lsl #\sz]
.endif
.endm
- .macro __hround, out0, out1, in0, in1, in2, in3, t3, t4, enc
+ .macro __hround, out0, out1, in0, in1, in2, in3, t3, t4, enc, sz, op
__select \out0, \in0, 0
__select t0, \in1, 1
- __load \out0, \out0, 0
- __load t0, t0, 1
+ __load \out0, \out0, 0, \sz, \op
+ __load t0, t0, 1, \sz, \op
.if \enc
__select \out1, \in1, 0
@@ -54,10 +54,10 @@
__select \out1, \in3, 0
__select t1, \in0, 1
.endif
- __load \out1, \out1, 0
+ __load \out1, \out1, 0, \sz, \op
__select t2, \in2, 2
- __load t1, t1, 1
- __load t2, t2, 2
+ __load t1, t1, 1, \sz, \op
+ __load t2, t2, 2, \sz, \op
eor \out0, \out0, t0, ror #24
@@ -69,9 +69,9 @@
__select \t3, \in1, 2
__select \t4, \in2, 3
.endif
- __load \t3, \t3, 2
- __load t0, t0, 3
- __load \t4, \t4, 3
+ __load \t3, \t3, 2, \sz, \op
+ __load t0, t0, 3, \sz, \op
+ __load \t4, \t4, 3, \sz, \op
eor \out1, \out1, t1, ror #24
eor \out0, \out0, t2, ror #16
@@ -83,14 +83,14 @@
eor \out1, \out1, t2
.endm
- .macro fround, out0, out1, out2, out3, in0, in1, in2, in3
- __hround \out0, \out1, \in0, \in1, \in2, \in3, \out2, \out3, 1
- __hround \out2, \out3, \in2, \in3, \in0, \in1, \in1, \in2, 1
+ .macro fround, out0, out1, out2, out3, in0, in1, in2, in3, sz=2, op
+ __hround \out0, \out1, \in0, \in1, \in2, \in3, \out2, \out3, 1, \sz, \op
+ __hround \out2, \out3, \in2, \in3, \in0, \in1, \in1, \in2, 1, \sz, \op
.endm
- .macro iround, out0, out1, out2, out3, in0, in1, in2, in3
- __hround \out0, \out1, \in0, \in3, \in2, \in1, \out2, \out3, 0
- __hround \out2, \out3, \in2, \in1, \in0, \in3, \in1, \in0, 0
+ .macro iround, out0, out1, out2, out3, in0, in1, in2, in3, sz=2, op
+ __hround \out0, \out1, \in0, \in3, \in2, \in1, \out2, \out3, 0, \sz, \op
+ __hround \out2, \out3, \in2, \in1, \in0, \in3, \in1, \in0, 0, \sz, \op
.endm
.macro __rev, out, in
@@ -115,7 +115,7 @@
.endif
.endm
- .macro do_crypt, round, ttab, ltab
+ .macro do_crypt, round, ttab, ltab, bsz
push {r3-r11, lr}
ldr r4, [in]
@@ -147,9 +147,12 @@
1: subs rounds, rounds, #4
\round r8, r9, r10, r11, r4, r5, r6, r7
- __adrl ttab, \ltab, ls
+ bls 2f
\round r4, r5, r6, r7, r8, r9, r10, r11
- bhi 0b
+ b 0b
+
+2: __adrl ttab, \ltab
+ \round r4, r5, r6, r7, r8, r9, r10, r11, \bsz, b
#ifdef CONFIG_CPU_BIG_ENDIAN
__rev r4, r4
@@ -173,14 +176,12 @@
.align 6
aes_table_reduced crypto_ft_tab
- aes_table_reduced crypto_fl_tab
aes_table_reduced crypto_it_tab
- aes_table_reduced crypto_il_tab
ENTRY(__aes_arm_encrypt)
- do_crypt fround, crypto_ft_tab, crypto_fl_tab
+ do_crypt fround, crypto_ft_tab, crypto_ft_tab + 1, 2
ENDPROC(__aes_arm_encrypt)
ENTRY(__aes_arm_decrypt)
- do_crypt iround, crypto_it_tab, crypto_il_tab
+ do_crypt iround, crypto_it_tab, crypto_aes_inv_sbox, 0
ENDPROC(__aes_arm_decrypt)
For the final round, avoid the expanded and padded lookup tables exported by the generic AES driver. Instead, for encryption, we can perform byte loads from the same table we used for the inner rounds, which will still be hot in the caches. For decryption, use the inverse AES Sbox exported by the generic AES driver, which is 4x smaller than the inverse table exported by the generic driver. This significantly reduces the Dcache footprint of our code, and does not introduce any additional module dependencies, given that we already rely on the core AES module for the shared key expansion routines. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> --- arch/arm/crypto/aes-cipher-core.S | 51 ++++++++++---------- 1 file changed, 26 insertions(+), 25 deletions(-) -- 2.9.3