diff mbox series

[v3,18/23] camss: vfe: Configure scaler module in VFE

Message ID 1500287629-23703-19-git-send-email-todor.tomov@linaro.org
State Accepted
Commit cce91b14692cb4378fcb6fc32607f6219e1901b3
Headers show
Series None | expand

Commit Message

Todor Tomov July 17, 2017, 10:33 a.m. UTC 
Add scaler module configuration support to be able to apply scaling.

Signed-off-by: Todor Tomov <todor.tomov@linaro.org>

---
 drivers/media/platform/qcom/camss-8x16/camss-vfe.c | 59 +++++++++++++++++-----
 1 file changed, 46 insertions(+), 13 deletions(-)

-- 
2.7.4
diff mbox series

Patch

diff --git a/drivers/media/platform/qcom/camss-8x16/camss-vfe.c b/drivers/media/platform/qcom/camss-8x16/camss-vfe.c
index 8ec6ce7..f994b35 100644
--- a/drivers/media/platform/qcom/camss-8x16/camss-vfe.c
+++ b/drivers/media/platform/qcom/camss-8x16/camss-vfe.c
@@ -183,13 +183,16 @@ 
 #define VFE_0_DEMUX_EVEN_CFG			0x438
 #define VFE_0_DEMUX_ODD_CFG			0x43c
 
+#define VFE_0_SCALE_ENC_Y_CFG			0x75c
+#define VFE_0_SCALE_ENC_Y_H_IMAGE_SIZE		0x760
+#define VFE_0_SCALE_ENC_Y_H_PHASE		0x764
+#define VFE_0_SCALE_ENC_Y_V_IMAGE_SIZE		0x76c
+#define VFE_0_SCALE_ENC_Y_V_PHASE		0x770
 #define VFE_0_SCALE_ENC_CBCR_CFG		0x778
 #define VFE_0_SCALE_ENC_CBCR_H_IMAGE_SIZE	0x77c
 #define VFE_0_SCALE_ENC_CBCR_H_PHASE		0x780
-#define VFE_0_SCALE_ENC_CBCR_H_PAD		0x78c
 #define VFE_0_SCALE_ENC_CBCR_V_IMAGE_SIZE	0x790
 #define VFE_0_SCALE_ENC_CBCR_V_PHASE		0x794
-#define VFE_0_SCALE_ENC_CBCR_V_PAD		0x7a0
 
 #define VFE_0_CLAMP_ENC_MAX_CFG			0x874
 #define VFE_0_CLAMP_ENC_MIN_CFG			0x878
@@ -645,6 +648,20 @@  static void vfe_set_demux_cfg(struct vfe_device *vfe, struct vfe_line *line)
 	writel_relaxed(odd_cfg, vfe->base + VFE_0_DEMUX_ODD_CFG);
 }
 
+static inline u8 vfe_calc_interp_reso(u16 input, u16 output)
+{
+	if (input / output >= 16)
+		return 0;
+
+	if (input / output >= 8)
+		return 1;
+
+	if (input / output >= 4)
+		return 2;
+
+	return 3;
+}
+
 static void vfe_set_scale_cfg(struct vfe_device *vfe, struct vfe_line *line)
 {
 	u32 p = line->video_out.active_fmt.fmt.pix_mp.pixelformat;
@@ -653,35 +670,51 @@  static void vfe_set_scale_cfg(struct vfe_device *vfe, struct vfe_line *line)
 	u8 interp_reso;
 	u32 phase_mult;
 
+	writel_relaxed(0x3, vfe->base + VFE_0_SCALE_ENC_Y_CFG);
+
+	input = line->fmt[MSM_VFE_PAD_SINK].width;
+	output = line->compose.width;
+	reg = (output << 16) | input;
+	writel_relaxed(reg, vfe->base + VFE_0_SCALE_ENC_Y_H_IMAGE_SIZE);
+
+	interp_reso = vfe_calc_interp_reso(input, output);
+	phase_mult = input * (1 << (13 + interp_reso)) / output;
+	reg = (interp_reso << 20) | phase_mult;
+	writel_relaxed(reg, vfe->base + VFE_0_SCALE_ENC_Y_H_PHASE);
+
+	input = line->fmt[MSM_VFE_PAD_SINK].height;
+	output = line->compose.height;
+	reg = (output << 16) | input;
+	writel_relaxed(reg, vfe->base + VFE_0_SCALE_ENC_Y_V_IMAGE_SIZE);
+
+	interp_reso = vfe_calc_interp_reso(input, output);
+	phase_mult = input * (1 << (13 + interp_reso)) / output;
+	reg = (interp_reso << 20) | phase_mult;
+	writel_relaxed(reg, vfe->base + VFE_0_SCALE_ENC_Y_V_PHASE);
+
 	writel_relaxed(0x3, vfe->base + VFE_0_SCALE_ENC_CBCR_CFG);
 
 	input = line->fmt[MSM_VFE_PAD_SINK].width;
-	output = line->fmt[MSM_VFE_PAD_SRC].width / 2;
+	output = line->compose.width / 2;
 	reg = (output << 16) | input;
 	writel_relaxed(reg, vfe->base + VFE_0_SCALE_ENC_CBCR_H_IMAGE_SIZE);
 
-	interp_reso = 3;
+	interp_reso = vfe_calc_interp_reso(input, output);
 	phase_mult = input * (1 << (13 + interp_reso)) / output;
 	reg = (interp_reso << 20) | phase_mult;
 	writel_relaxed(reg, vfe->base + VFE_0_SCALE_ENC_CBCR_H_PHASE);
 
-	reg = input;
-	writel_relaxed(reg, vfe->base + VFE_0_SCALE_ENC_CBCR_H_PAD);
-
 	input = line->fmt[MSM_VFE_PAD_SINK].height;
-	output = line->fmt[MSM_VFE_PAD_SRC].height;
+	output = line->compose.height;
 	if (p == V4L2_PIX_FMT_NV12 || p == V4L2_PIX_FMT_NV21)
-		output = line->fmt[MSM_VFE_PAD_SRC].height / 2;
+		output = line->compose.height / 2;
 	reg = (output << 16) | input;
 	writel_relaxed(reg, vfe->base + VFE_0_SCALE_ENC_CBCR_V_IMAGE_SIZE);
 
-	interp_reso = 3;
+	interp_reso = vfe_calc_interp_reso(input, output);
 	phase_mult = input * (1 << (13 + interp_reso)) / output;
 	reg = (interp_reso << 20) | phase_mult;
 	writel_relaxed(reg, vfe->base + VFE_0_SCALE_ENC_CBCR_V_PHASE);
-
-	reg = input;
-	writel_relaxed(reg, vfe->base + VFE_0_SCALE_ENC_CBCR_V_PAD);
 }
 
 static void vfe_set_clamp_cfg(struct vfe_device *vfe)