new file mode 100644
@@ -0,0 +1,157 @@
+#ifndef __ASMARM_CTI_H
+#define __ASMARM_CTI_H
+
+#include <asm/io.h>
+
+/* The registers' definition is from section 3.2 of
+ * Embedded Cross Trigger Revision: r0p0
+ */
+#define CTICONTROL 0x000
+#define CTISTATUS 0x004
+#define CTILOCK 0x008
+#define CTIPROTECTION 0x00C
+#define CTIINTACK 0x010
+#define CTIAPPSET 0x014
+#define CTIAPPCLEAR 0x018
+#define CTIAPPPULSE 0x01c
+#define CTIINEN 0x020
+#define CTIOUTEN 0x0A0
+#define CTITRIGINSTATUS 0x130
+#define CTITRIGOUTSTATUS 0x134
+#define CTICHINSTATUS 0x138
+#define CTICHOUTSTATUS 0x13c
+#define CTIPERIPHID0 0xFE0
+#define CTIPERIPHID1 0xFE4
+#define CTIPERIPHID2 0xFE8
+#define CTIPERIPHID3 0xFEC
+#define CTIPCELLID0 0xFF0
+#define CTIPCELLID1 0xFF4
+#define CTIPCELLID2 0xFF8
+#define CTIPCELLID3 0xFFC
+
+/* The below are from section 3.6.4 of
+ * CoreSight v1.0 Architecture Specification
+ */
+#define LOCKACCESS 0xFB0
+#define LOCKSTATUS 0xFB4
+
+/* write this value to LOCKACCESS will unlock the module, and
+ * other value will lock the module
+ */
+#define LOCKCODE 0xC5ACCE55
+
+/**
+ * struct cti - cross trigger interface struct
+ * @base: mapped virtual address for the cti base
+ * @irq: irq number for the cti
+ * @trig_out_for_irq: triger out number which will cause
+ * the @irq happen
+ *
+ * cti struct used to operate cti registers.
+ */
+struct cti {
+ void __iomem *base;
+ int irq;
+ int trig_out_for_irq;
+};
+
+/**
+ * cti_init - initialize the cti instance
+ * @cti: cti instance
+ * @base: mapped virtual address for the cti base
+ * @irq: irq number for the cti
+ * @trig_out: triger out number which will cause
+ * the @irq happen
+ *
+ * called by machine code to pass the board dependent
+ * @base, @irq and @trig_out to cti.
+ */
+static inline void cti_init(struct cti *cti,
+ void __iomem *base, int irq, int trig_out)
+{
+ cti->base = base;
+ cti->irq = irq;
+ cti->trig_out_for_irq = trig_out;
+}
+
+/**
+ * cti_map_trigger - use the @chan to map @trig_in to @trig_out
+ * @cti: cti instance
+ * @trig_in: trigger in number
+ * @trig_out: trigger out number
+ * @channel: channel number
+ *
+ * This function maps one trigger in of @trig_in to one trigger
+ * out of @trig_out using the channel @chan.
+ */
+static inline void cti_map_trigger(struct cti *cti,
+ int trig_in, int trig_out, int chan)
+{
+ void __iomem *base = cti->base;
+
+ __raw_writel(BIT(chan), base + CTIINEN + trig_in * 4);
+ __raw_writel(BIT(chan), base + CTIOUTEN + trig_out * 4);
+}
+
+/**
+ * cti_enable - enable the cti module
+ * @cti: cti instance
+ *
+ * enable the cti module
+ */
+static inline void cti_enable(struct cti *cti)
+{
+ __raw_writel(0x1, cti->base + CTICONTROL);
+}
+
+/**
+ * cti_disable - disable the cti module
+ * @cti: cti instance
+ *
+ * enable the cti module
+ */
+static inline void cti_disable(struct cti *cti)
+{
+ __raw_writel(0, cti->base + CTICONTROL);
+}
+
+/**
+ * cti_irq_ack - clear the cti irq
+ * @cti: cti instance
+ *
+ * clear the cti irq
+ */
+static inline void cti_irq_ack(struct cti *cti)
+{
+ void __iomem *base = cti->base;
+ unsigned long val;
+
+ val = __raw_readl(base + CTIINTACK);
+ val |= BIT(cti->trig_out_for_irq);
+ __raw_writel(val, base + CTIINTACK);
+}
+
+/**
+ * cti_unlock - unlock cti module
+ * @cti: cti instance
+ *
+ * unlock the cti module, or else any writes to the cti
+ * module is not allowed.
+ */
+static inline void cti_unlock(struct cti *cti)
+{
+ __raw_writel(LOCKCODE, cti->base + LOCKACCESS);
+}
+
+/**
+ * cti_lock - lock cti module
+ * @cti: cti instance
+ *
+ * lock the cti module, so any writes to the cti
+ * module will be not allowed.
+ */
+static inline void cti_lock(struct cti *cti)
+{
+ __raw_writel(~LOCKCODE, cti->base + LOCKACCESS);
+}
+#endif
@@ -22,13 +22,22 @@ enum arm_pmu_type {
/*
* struct arm_pmu_platdata - ARM PMU platform data
*
- * @handle_irq: an optional handler which will be called from the interrupt and
- * passed the address of the low level handler, and can be used to implement
- * any platform specific handling before or after calling it.
+ * @handle_irq: an optional handler which will be called from the
+ * interrupt and passed the address of the low level handler,
+ * and can be used to implement any platform specific handling
+ * before or after calling it.
+ * @enable_irq: an optional handler which will be called after
+ * request_irq and be used to handle some platform specific
+ * irq enablement
+ * @disable_irq: an optional handler which will be called before
+ * free_irq and be used to handle some platform specific
+ * irq disablement
*/
struct arm_pmu_platdata {
irqreturn_t (*handle_irq)(int irq, void *dev,
irq_handler_t pmu_handler);
+ void (*enable_irq)(int irq);
+ void (*disable_irq)(int irq);
};
#ifdef CONFIG_CPU_HAS_PMU
@@ -426,14 +426,18 @@ armpmu_reserve_hardware(void)
pr_warning("unable to request IRQ%d for ARM perf "
"counters\n", irq);
break;
- }
+ } else if (plat->enable_irq)
+ plat->enable_irq(irq);
}
if (err) {
for (i = i - 1; i >= 0; --i) {
irq = platform_get_irq(pmu_device, i);
- if (irq >= 0)
+ if (irq >= 0) {
+ if (plat->disable_irq)
+ plat->disable_irq(irq);
free_irq(irq, NULL);
+ }
}
release_pmu(pmu_device);
pmu_device = NULL;
@@ -446,11 +450,16 @@ static void
armpmu_release_hardware(void)
{
int i, irq;
+ struct arm_pmu_platdata *plat =
+ dev_get_platdata(&pmu_device->dev);
for (i = pmu_device->num_resources - 1; i >= 0; --i) {
irq = platform_get_irq(pmu_device, i);
- if (irq >= 0)
+ if (irq >= 0) {
+ if (plat->disable_irq)
+ plat->disable_irq(irq);
free_irq(irq, NULL);
+ }
}
armpmu->stop();
@@ -22,6 +22,7 @@
#include <asm/mach-types.h>
#include <asm/mach/map.h>
#include <asm/pmu.h>
+#include <asm/cti.h>
#include <plat/tc.h>
#include <plat/board.h>
@@ -386,20 +387,95 @@ static struct resource omap3_pmu_resource = {
.flags = IORESOURCE_IRQ,
};
+static struct resource omap4_pmu_resource[] = {
+ {
+ .start = OMAP44XX_IRQ_CTI0,
+ .end = OMAP44XX_IRQ_CTI0,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = OMAP44XX_IRQ_CTI1,
+ .end = OMAP44XX_IRQ_CTI1,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
static struct platform_device omap_pmu_device = {
.name = "arm-pmu",
.id = ARM_PMU_DEVICE_CPU,
.num_resources = 1,
};
+static struct arm_pmu_platdata omap4_pmu_data;
+static struct cti omap4_cti[2];
+
+static void omap4_enable_cti(int irq)
+{
+ if (irq == OMAP44XX_IRQ_CTI0)
+ cti_enable(&omap4_cti[0]);
+ else if (irq == OMAP44XX_IRQ_CTI1)
+ cti_enable(&omap4_cti[1]);
+}
+
+static void omap4_disable_cti(int irq)
+{
+ if (irq == OMAP44XX_IRQ_CTI0)
+ cti_disable(&omap4_cti[0]);
+ else if (irq == OMAP44XX_IRQ_CTI1)
+ cti_disable(&omap4_cti[1]);
+}
+
+static irqreturn_t omap4_pmu_handler(int irq, void *dev, irq_handler_t handler)
+{
+ if (irq == OMAP44XX_IRQ_CTI0)
+ cti_irq_ack(&omap4_cti[0]);
+ else if (irq == OMAP44XX_IRQ_CTI1)
+ cti_irq_ack(&omap4_cti[1]);
+
+ return handler(irq, dev);
+}
+
+static void omap4_configure_pmu_irq(void)
+{
+ void __iomem *base0;
+ void __iomem *base1;
+
+ base0 = ioremap(OMAP44XX_CTI0_BASE, SZ_4K);
+ base1 = ioremap(OMAP44XX_CTI1_BASE, SZ_4K);
+ if (!base0 && !base1) {
+ pr_err("ioremap for OMAP4 CTI failed\n");
+ return;
+ }
+
+ /*configure CTI0 for pmu irq routing*/
+ cti_init(&omap4_cti[0], base0, OMAP44XX_IRQ_CTI0, 6);
+ cti_unlock(&omap4_cti[0]);
+ cti_map_trigger(&omap4_cti[0], 1, 6, 2);
+
+ /*configure CTI1 for pmu irq routing*/
+ cti_init(&omap4_cti[1], base1, OMAP44XX_IRQ_CTI1, 6);
+ cti_unlock(&omap4_cti[1]);
+ cti_map_trigger(&omap4_cti[1], 1, 6, 2);
+
+ omap4_pmu_data.handle_irq = omap4_pmu_handler;
+ omap4_pmu_data.enable_irq = omap4_enable_cti;
+ omap4_pmu_data.disable_irq = omap4_disable_cti;
+}
+
static void omap_init_pmu(void)
{
- if (cpu_is_omap24xx())
+ if (cpu_is_omap24xx()) {
omap_pmu_device.resource = &omap2_pmu_resource;
- else if (cpu_is_omap34xx())
+ } else if (cpu_is_omap34xx()) {
omap_pmu_device.resource = &omap3_pmu_resource;
- else
+ } else if (cpu_is_omap44xx()) {
+ omap_pmu_device.resource = omap4_pmu_resource;
+ omap_pmu_device.num_resources = 2;
+ omap_pmu_device.dev.platform_data = &omap4_pmu_data;
+ omap4_configure_pmu_irq();
+ } else {
return;
+ }
platform_device_register(&omap_pmu_device);
}
@@ -57,5 +57,7 @@
#define OMAP44XX_HSUSB_OHCI_BASE (L4_44XX_BASE + 0x64800)
#define OMAP44XX_HSUSB_EHCI_BASE (L4_44XX_BASE + 0x64C00)
+#define OMAP44XX_CTI0_BASE 0x54148000
+#define OMAP44XX_CTI1_BASE 0x54149000
#endif /* __ASM_ARCH_OMAP44XX_H */
This patch fixes the bug #702999 (oprofile failure on panda (omap4)). It is based on [1] that fixes the issue by enabling pmu events for omap4, which are routed from CTI. The patch attached is a modified version of [1] with removal of some CTI register reads that cause hang in the initial phase of booting. The patch has been verified on Panda board and the profile data could be generated that are shown by opreport. Although, there is a lockdep warning "possible circular locking dependency detected" when "opcontrol --start" is called for the first time. Regards, Avik [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2011-March/045283.html Signed-off-by: Avik Sil <avik.sil@linaro.org> --- arch/arm/include/asm/cti.h | 157 ++++++++++++++++++++++++++++ arch/arm/include/asm/pmu.h | 15 ++- arch/arm/kernel/perf_event.c | 15 ++- arch/arm/mach-omap2/devices.c | 82 ++++++++++++++- arch/arm/plat-omap/include/plat/omap44xx.h | 2 + 5 files changed, 262 insertions(+), 9 deletions(-) create mode 100644 arch/arm/include/asm/cti.h