diff mbox

Applied "ASoC: es8328: Let device auto detect ratios in slave mode" to the asoc tree

Message ID E1ckqAF-0002Vx-W7@finisterre
State New
Headers show

Commit Message

Mark Brown March 6, 2017, 10:46 a.m. UTC
The patch

   ASoC: es8328: Let device auto detect ratios in slave mode

has been applied to the asoc tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From ae884ae78a238c36e4abfdb53d4659d5fca67433 Mon Sep 17 00:00:00 2001
From: Romain Perier <romain.perier@collabora.com>

Date: Wed, 1 Mar 2017 10:11:05 +0100
Subject: [PATCH] ASoC: es8328: Let device auto detect ratios in slave mode

In master mode, SCLK and LRCLK signals are generated by the CODEC when
any of the ADC/DAC are enabled. SCLK is derived from MCLK via a
programmable division set by BLK_DIV, LRCLK is derived from MCLK via
another programmable division set by ADCFsRatio/DACFsRatio.

In slave mode, SCLK and LRCLK signals are received as inputs and
supplied externally. LRCLK and SCLK must be synchronously derived from
MCLK with specific rates. The device can auto detect MCLK/LRCLK ratio
according to a predefined table. LRCLK/SCLK ratio is usually 64 (SCLK =
64 * LRCLK)

This commits adds support to let to device auto detect and decide which
ratio to use. The mclkdiv2 and BCLK_DIV ratio and put to zero.

Signed-off-by: Romain Perier <romain.perier@collabora.com>

Signed-off-by: Mark Brown <broonie@kernel.org>

---
 sound/soc/codecs/es8328.c | 39 +++++++++++++++++++++++++--------------
 1 file changed, 25 insertions(+), 14 deletions(-)

-- 
2.11.0

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
diff mbox

Patch

diff --git a/sound/soc/codecs/es8328.c b/sound/soc/codecs/es8328.c
index 3f84fbd071e2..51dca8662942 100644
--- a/sound/soc/codecs/es8328.c
+++ b/sound/soc/codecs/es8328.c
@@ -91,6 +91,7 @@  struct es8328_priv {
 	int mclkdiv2;
 	const struct snd_pcm_hw_constraint_list *sysclk_constraints;
 	const int *mclk_ratios;
+	bool master;
 	struct regulator_bulk_data supplies[ES8328_SUPPLY_NUM];
 };
 
@@ -469,7 +470,7 @@  static int es8328_startup(struct snd_pcm_substream *substream,
 	struct snd_soc_codec *codec = dai->codec;
 	struct es8328_priv *es8328 = snd_soc_codec_get_drvdata(codec);
 
-	if (es8328->sysclk_constraints)
+	if (es8328->master && es8328->sysclk_constraints)
 		snd_pcm_hw_constraint_list(substream->runtime, 0,
 				SNDRV_PCM_HW_PARAM_RATE,
 				es8328->sysclk_constraints);
@@ -488,27 +489,34 @@  static int es8328_hw_params(struct snd_pcm_substream *substream,
 	int wl;
 	int ratio;
 
-	if (!es8328->sysclk_constraints) {
-		dev_err(codec->dev, "No MCLK configured\n");
-		return -EINVAL;
-	}
-
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
 		reg = ES8328_DACCONTROL2;
 	else
 		reg = ES8328_ADCCONTROL5;
 
-	for (i = 0; i < es8328->sysclk_constraints->count; i++)
-		if (es8328->sysclk_constraints->list[i] == params_rate(params))
-			break;
+	if (es8328->master) {
+		if (!es8328->sysclk_constraints) {
+			dev_err(codec->dev, "No MCLK configured\n");
+			return -EINVAL;
+		}
 
-	if (i == es8328->sysclk_constraints->count) {
-		dev_err(codec->dev, "LRCLK %d unsupported with current clock\n",
-			params_rate(params));
-		return -EINVAL;
+		for (i = 0; i < es8328->sysclk_constraints->count; i++)
+			if (es8328->sysclk_constraints->list[i] ==
+			    params_rate(params))
+				break;
+
+		if (i == es8328->sysclk_constraints->count) {
+			dev_err(codec->dev,
+				"LRCLK %d unsupported with current clock\n",
+				params_rate(params));
+			return -EINVAL;
+		}
+		ratio = es8328->mclk_ratios[i];
+	} else {
+		ratio = 0;
+		es8328->mclkdiv2 = 0;
 	}
 
-	ratio = es8328->mclk_ratios[i];
 	snd_soc_update_bits(codec, ES8328_MASTERMODE,
 			ES8328_MASTERMODE_MCLKDIV2,
 			es8328->mclkdiv2 ? ES8328_MASTERMODE_MCLKDIV2 : 0);
@@ -586,6 +594,7 @@  static int es8328_set_dai_fmt(struct snd_soc_dai *codec_dai,
 		unsigned int fmt)
 {
 	struct snd_soc_codec *codec = codec_dai->codec;
+	struct es8328_priv *es8328 = snd_soc_codec_get_drvdata(codec);
 	u8 dac_mode = 0;
 	u8 adc_mode = 0;
 
@@ -595,11 +604,13 @@  static int es8328_set_dai_fmt(struct snd_soc_dai *codec_dai,
 		snd_soc_update_bits(codec, ES8328_MASTERMODE,
 				    ES8328_MASTERMODE_MSC,
 				    ES8328_MASTERMODE_MSC);
+		es8328->master = true;
 		break;
 	case SND_SOC_DAIFMT_CBS_CFS:
 		/* Slave serial port mode */
 		snd_soc_update_bits(codec, ES8328_MASTERMODE,
 				    ES8328_MASTERMODE_MSC, 0);
+		es8328->master = false;
 		break;
 	default:
 		return -EINVAL;