| Message ID | 20170612094137.6821-1-srinivas.kandagatla@linaro.org |
|---|---|
| State | Superseded |
| Headers | show |
On 06/12, Srinivas Kandagatla wrote: > This patch adds missing LPASS smmu clks which are required by the audio driver. > > Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> > --- > drivers/clk/qcom/gcc-msm8996.c | 26 ++++++++++++++++++++++++++ > include/dt-bindings/clock/qcom,gcc-msm8996.h | 2 ++ > 2 files changed, 28 insertions(+) > > diff --git a/drivers/clk/qcom/gcc-msm8996.c b/drivers/clk/qcom/gcc-msm8996.c > index 56e0a295c74e..6290ce551505 100644 > --- a/drivers/clk/qcom/gcc-msm8996.c > +++ b/drivers/clk/qcom/gcc-msm8996.c > @@ -2644,6 +2644,30 @@ static struct clk_fixed_factor ufs_rx_cfg_clk_src = { > }, > }; > > +static struct clk_branch gcc_hlos1_vote_lpass_core_smmu_clk = { > + .halt_reg = 0x7d010, Don't we need .halt_check = BRANCH_HALT_VOTED for these? > + .clkr = { > + .enable_reg = 0x7d010, > + .enable_mask = BIT(0), > + .hw.init = &(struct clk_init_data){ > + .name = "hlos1_vote_lpass_core_smmu_clk", > + .ops = &clk_branch2_ops, > + }, > + }, > +}; > + > +static struct clk_branch gcc_hlos1_vote_lpass_adsp_smmu_clk = { > + .halt_reg = 0x7d014, > + .clkr = { > + .enable_reg = 0x7d014, > + .enable_mask = BIT(0), > + .hw.init = &(struct clk_init_data){ > + .name = "hlos1_vote_lpass_adsp_smmu_clk", > + .ops = &clk_branch2_ops, > + }, > + }, > +}; > + -- Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 20/06/17 01:47, Stephen Boyd wrote: > On 06/12, Srinivas Kandagatla wrote: >> This patch adds missing LPASS smmu clks which are required by the audio driver. >> >> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> >> --- >> drivers/clk/qcom/gcc-msm8996.c | 26 ++++++++++++++++++++++++++ >> include/dt-bindings/clock/qcom,gcc-msm8996.h | 2 ++ >> 2 files changed, 28 insertions(+) >> >> diff --git a/drivers/clk/qcom/gcc-msm8996.c b/drivers/clk/qcom/gcc-msm8996.c >> index 56e0a295c74e..6290ce551505 100644 >> --- a/drivers/clk/qcom/gcc-msm8996.c >> +++ b/drivers/clk/qcom/gcc-msm8996.c >> @@ -2644,6 +2644,30 @@ static struct clk_fixed_factor ufs_rx_cfg_clk_src = { >> }, >> }; >> >> +static struct clk_branch gcc_hlos1_vote_lpass_core_smmu_clk = { >> + .halt_reg = 0x7d010, > > Don't we need .halt_check = BRANCH_HALT_VOTED for these? > I don't think we need it for these clks, Downstream driver has no_halt_check_on_disable = true for both these clks. thanks, srini >> + .clkr = { >> + .enable_reg = 0x7d010, >> + .enable_mask = BIT(0), >> + .hw.init = &(struct clk_init_data){ >> + .name = "hlos1_vote_lpass_core_smmu_clk", >> + .ops = &clk_branch2_ops, >> + }, >> + }, >> +}; >> + >> +static struct clk_branch gcc_hlos1_vote_lpass_adsp_smmu_clk = { >> + .halt_reg = 0x7d014, >> + .clkr = { >> + .enable_reg = 0x7d014, >> + .enable_mask = BIT(0), >> + .hw.init = &(struct clk_init_data){ >> + .name = "hlos1_vote_lpass_adsp_smmu_clk", >> + .ops = &clk_branch2_ops, >> + }, >> + }, >> +}; >> + > -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 06/23, Srinivas Kandagatla wrote: > > > On 20/06/17 01:47, Stephen Boyd wrote: > >On 06/12, Srinivas Kandagatla wrote: > >>This patch adds missing LPASS smmu clks which are required by the audio driver. > >> > >>Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> > >>--- > >> drivers/clk/qcom/gcc-msm8996.c | 26 ++++++++++++++++++++++++++ > >> include/dt-bindings/clock/qcom,gcc-msm8996.h | 2 ++ > >> 2 files changed, 28 insertions(+) > >> > >>diff --git a/drivers/clk/qcom/gcc-msm8996.c b/drivers/clk/qcom/gcc-msm8996.c > >>index 56e0a295c74e..6290ce551505 100644 > >>--- a/drivers/clk/qcom/gcc-msm8996.c > >>+++ b/drivers/clk/qcom/gcc-msm8996.c > >>@@ -2644,6 +2644,30 @@ static struct clk_fixed_factor ufs_rx_cfg_clk_src = { > >> }, > >> }; > >>+static struct clk_branch gcc_hlos1_vote_lpass_core_smmu_clk = { > >>+ .halt_reg = 0x7d010, > > > >Don't we need .halt_check = BRANCH_HALT_VOTED for these? > > > I don't think we need it for these clks, Downstream driver has > no_halt_check_on_disable = true for both these clks. > > Right, no_halt_check_on_disable means we don't check the halt bit when disabling the clk, but we _do_ check the halt bit when enabling. In upstream clk driver that would be indicated with BRANCH_HALT_VOTED, where we check the halt bit when enabling and it's voted and do a small udelay() if we're disabling and it's voted. I suppose that small udelay() could be removed because it doesn't really matter that it turns off or not when we're disabling a voted clk. -- Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/clk/qcom/gcc-msm8996.c b/drivers/clk/qcom/gcc-msm8996.c index 56e0a295c74e..6290ce551505 100644 --- a/drivers/clk/qcom/gcc-msm8996.c +++ b/drivers/clk/qcom/gcc-msm8996.c @@ -2644,6 +2644,30 @@ static struct clk_fixed_factor ufs_rx_cfg_clk_src = { }, }; +static struct clk_branch gcc_hlos1_vote_lpass_core_smmu_clk = { + .halt_reg = 0x7d010, + .clkr = { + .enable_reg = 0x7d010, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "hlos1_vote_lpass_core_smmu_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_hlos1_vote_lpass_adsp_smmu_clk = { + .halt_reg = 0x7d014, + .clkr = { + .enable_reg = 0x7d014, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "hlos1_vote_lpass_adsp_smmu_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + static struct clk_branch gcc_ufs_rx_cfg_clk = { .halt_reg = 0x75014, .clkr = { @@ -3217,6 +3241,8 @@ static struct clk_regmap *gcc_msm8996_clocks[] = { [GCC_UFS_AHB_CLK] = &gcc_ufs_ahb_clk.clkr, [GCC_UFS_TX_CFG_CLK] = &gcc_ufs_tx_cfg_clk.clkr, [GCC_UFS_RX_CFG_CLK] = &gcc_ufs_rx_cfg_clk.clkr, + [GCC_HLOS1_VOTE_LPASS_CORE_SMMU_CLK] = &gcc_hlos1_vote_lpass_core_smmu_clk.clkr, + [GCC_HLOS1_VOTE_LPASS_ADSP_SMMU_CLK] = &gcc_hlos1_vote_lpass_adsp_smmu_clk.clkr, [GCC_UFS_TX_SYMBOL_0_CLK] = &gcc_ufs_tx_symbol_0_clk.clkr, [GCC_UFS_RX_SYMBOL_0_CLK] = &gcc_ufs_rx_symbol_0_clk.clkr, [GCC_UFS_RX_SYMBOL_1_CLK] = &gcc_ufs_rx_symbol_1_clk.clkr, diff --git a/include/dt-bindings/clock/qcom,gcc-msm8996.h b/include/dt-bindings/clock/qcom,gcc-msm8996.h index 1847e130f5a0..4df1898d71b2 100644 --- a/include/dt-bindings/clock/qcom,gcc-msm8996.h +++ b/include/dt-bindings/clock/qcom,gcc-msm8996.h @@ -229,6 +229,8 @@ #define GCC_PCIE_CLKREF_CLK 216 #define GCC_RX2_USB2_CLKREF_CLK 217 #define GCC_RX1_USB2_CLKREF_CLK 218 +#define GCC_HLOS1_VOTE_LPASS_CORE_SMMU_CLK 219 +#define GCC_HLOS1_VOTE_LPASS_ADSP_SMMU_CLK 220 #define GCC_SYSTEM_NOC_BCR 0 #define GCC_CONFIG_NOC_BCR 1
This patch adds missing LPASS smmu clks which are required by the audio driver. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> --- drivers/clk/qcom/gcc-msm8996.c | 26 ++++++++++++++++++++++++++ include/dt-bindings/clock/qcom,gcc-msm8996.h | 2 ++ 2 files changed, 28 insertions(+) -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html