| Message ID | 20170530120918.27357-2-linus.walleij@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | [1/2,v3] input: keyboard: DT bindings for the D-Link DIR-685 touchkeys | expand |
Hi Linus, On Tue, May 30, 2017 at 02:09:18PM +0200, Linus Walleij wrote: > + /* > + * This key appears in the vendor driver, but I have > + * not been able to provoke it. > + */ > + tk->codes[6] = KEY_O; If there is no way to make the device produce this key, should we mark is as KEY_RESERVED? KEY_O would not be suitable in any case, we'd need to find more suitable keycode for whatever function is has. If it is OK I can make the change locally. Thanks. -- Dmitry -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, May 30, 2017 at 6:40 PM, Dmitry Torokhov <dmitry.torokhov@gmail.com> wrote: > On Tue, May 30, 2017 at 02:09:18PM +0200, Linus Walleij wrote: >> + /* >> + * This key appears in the vendor driver, but I have >> + * not been able to provoke it. >> + */ >> + tk->codes[6] = KEY_O; > > If there is no way to make the device produce this key, should we mark > is as KEY_RESERVED? KEY_O would not be suitable in any case, we'd need > to find more suitable keycode for whatever function is has. OK I'm in on this. > If it is OK I can make the change locally. Sure go ahead when applying! Yours, Linus Walleij -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Linus, On Tue, May 30, 2017 at 02:09:18PM +0200, Linus Walleij wrote: > This adds support for the D-Link DIR-685 touchkeys found in the > router with this name. > > The vendor code calles this a "touchpad" but we are registering > it here under its real name. > > Signed-off-by: Linus Walleij <linus.walleij@linaro.org> > --- > ChangeLog v2->v3: > - Switch "KEY_W" to "KEY_WPS_BUTTON" as apropriate. > - Add comment about the mysterious "KEY_O". > ChangeLog v1->v2: > - Change the whole touchpad->touchkey naming scheme, even in > the device tree bindings. > - Embedd the keycodes directly into the state container and > open code the key assignments. > - Use Dmitry's suggested XOR loop to detect key state changes. > - Drop <linux/mutex.h> add <linux/bitops.h> > - Drop dependency on the OF config symbol. > - Rename all "ret" to "err". > - Drop driver dev_info() announcement. > --- > MAINTAINERS | 6 + > drivers/input/keyboard/Kconfig | 11 ++ > drivers/input/keyboard/Makefile | 1 + > drivers/input/keyboard/dlink-dir685-touchkeys.c | 157 ++++++++++++++++++++++++ > 4 files changed, 175 insertions(+) > create mode 100644 drivers/input/keyboard/dlink-dir685-touchkeys.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index 96753be12026..eea776eec996 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -3779,6 +3779,12 @@ S: Supported > F: drivers/input/touchscreen/cyttsp* > F: include/linux/input/cyttsp.h > > +D-LINK DIR-685 TOUCHKEYS DRIVER > +M: Linus Walleij <linus.walleij@linaro.org> > +L: linux-input@vger.kernel.org > +S: Supported > +F: drivers/input/dlink-dir685-touchkeys.c > + > DALLAS/MAXIM DS1685-FAMILY REAL TIME CLOCK > M: Joshua Kinard <kumba@gentoo.org> > S: Maintained > diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig > index 97acd6524ad7..4c4ab1ced235 100644 > --- a/drivers/input/keyboard/Kconfig > +++ b/drivers/input/keyboard/Kconfig > @@ -178,6 +178,17 @@ config KEYBOARD_CLPS711X > To compile this driver as a module, choose M here: the > module will be called clps711x-keypad. > > +config KEYBOARD_DLINK_DIR685 > + tristate "D-Link DIR-685 touchkeys support" > + depends on I2C > + default ARCH_GEMINI > + help > + If you say yes here you get support for the D-Link DIR-685 > + touchkeys. > + > + To compile this driver as a module, choose M here: the > + module will be called dlink-dir685-touchkeys. > + > config KEYBOARD_LKKBD > tristate "DECstation/VAXstation LK201/LK401 keyboard" > select SERIO > diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile > index 7d9acff819a7..d2338bacdad1 100644 > --- a/drivers/input/keyboard/Makefile > +++ b/drivers/input/keyboard/Makefile > @@ -17,6 +17,7 @@ obj-$(CONFIG_KEYBOARD_CAP11XX) += cap11xx.o > obj-$(CONFIG_KEYBOARD_CLPS711X) += clps711x-keypad.o > obj-$(CONFIG_KEYBOARD_CROS_EC) += cros_ec_keyb.o > obj-$(CONFIG_KEYBOARD_DAVINCI) += davinci_keyscan.o > +obj-$(CONFIG_KEYBOARD_DLINK_DIR685) += dlink-dir685-touchkeys.o > obj-$(CONFIG_KEYBOARD_EP93XX) += ep93xx_keypad.o > obj-$(CONFIG_KEYBOARD_GOLDFISH_EVENTS) += goldfish_events.o > obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o > diff --git a/drivers/input/keyboard/dlink-dir685-touchkeys.c b/drivers/input/keyboard/dlink-dir685-touchkeys.c > new file mode 100644 > index 000000000000..6d6f60963e3c > --- /dev/null > +++ b/drivers/input/keyboard/dlink-dir685-touchkeys.c > @@ -0,0 +1,157 @@ > +/* > + * D-Link DIR-685 router I2C-based Touchkeys input driver > + * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org> > + * > + * This is a one-off touchkey controller based on the Cypress Semiconductor > + * CY8C214 MCU with some firmware in its internal 8KB flash. The circuit > + * board inside the router is named E119921 > + */ > + > +#include <linux/module.h> > +#include <linux/i2c.h> > +#include <linux/interrupt.h> > +#include <linux/delay.h> > +#include <linux/input.h> > +#include <linux/slab.h> > +#include <linux/bitops.h> > + > +struct dir685_touchkeys { > + struct device *dev; > + struct i2c_client *client; > + struct input_dev *input; > + unsigned long cur_key; > + u16 codes[7]; > +}; > + > +static irqreturn_t dir685_tk_irq_thread(int irq, void *data) > +{ > + struct dir685_touchkeys *tk = data; > + const int num_bits = min_t(int, ARRAY_SIZE(tk->codes), 16); > + unsigned long changed; > + u8 buf[6]; > + unsigned long key; > + int i; > + int err; > + > + memset(buf, 0, sizeof(buf)); > + err = i2c_master_recv(tk->client, buf, sizeof(buf)); > + if (err != sizeof(buf)) { > + dev_err(tk->dev, "short read %d\n", err); > + return IRQ_HANDLED; > + } > + > + dev_dbg(tk->dev, "IN: %02x, %02x, %02x, %02x, %02x, %02x\n", > + buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]); I changed this to dev_dbg(tk->dev, "IN: %*ph\n", (int)sizeof(buf), buf); > + key = be16_to_cpup((__le16 *) &buf[4]); Changed __le16 to __be16 as I assume the conversion was right, just the annotation wrong. > + > + /* Figure out if any bits went high or low since last message */ > + changed = tk->cur_key ^ key; > + for_each_set_bit(i, &changed, num_bits) { > + dev_dbg(tk->dev, "key %d is %s\n", i, > + test_bit(i, &key) ? "down" : "up"); > + input_report_key(tk->input, tk->codes[i], test_bit(i, &key)); > + } > + > + /* Store currently down keys */ > + tk->cur_key = key; > + input_sync(tk->input); > + > + return IRQ_HANDLED; > +} > + > +static int dir685_tk_probe(struct i2c_client *client, > + const struct i2c_device_id *id) > +{ > + struct dir685_touchkeys *tk; > + struct device *dev = &client->dev; > + u8 bl_data[] = { 0xa7, 0x40 }; > + int err; > + int i; > + > + tk = devm_kzalloc(&client->dev, sizeof(*tk), GFP_KERNEL); > + if (!tk) > + return -ENOMEM; > + > + tk->input = devm_input_allocate_device(dev); > + if (!tk->input) > + return -ENOMEM; > + > + tk->client = client; > + tk->dev = dev; > + > + tk->input->keycodesize = sizeof(u16); > + tk->input->keycodemax = ARRAY_SIZE(tk->codes); > + tk->input->keycode = tk->codes; > + tk->codes[0] = KEY_UP; > + tk->codes[1] = KEY_DOWN; > + tk->codes[2] = KEY_LEFT; > + tk->codes[3] = KEY_RIGHT; > + tk->codes[4] = KEY_ENTER; > + tk->codes[5] = KEY_WPS_BUTTON; > + /* > + * This key appears in the vendor driver, but I have > + * not been able to provoke it. > + */ > + tk->codes[6] = KEY_O; As we have discussed, I changed this to KEY_RESERVED. > + > + __set_bit(EV_KEY, tk->input->evbit); > + for (i = 0; i < ARRAY_SIZE(tk->codes); i++) > + __set_bit(tk->codes[i], tk->input->keybit); > + > + tk->input->name = "D-Link DIR-685 touchkeys"; > + input_set_drvdata(tk->input, tk); Dropped as noone is using it at the moment. Added instead: tk->input->id.bustype = BUS_I2C; > + > + err = input_register_device(tk->input); > + if (err) > + return err; > + > + /* Set up the brightness to max level */ > + err = i2c_master_send(client, bl_data, sizeof(bl_data)); > + if (err != sizeof(bl_data)) > + dev_warn(tk->dev, "error setting up brightness level\n"); > + > + if (!client->irq) { > + dev_err(dev, "no IRQ on the I2C device\n"); > + return -ENODEV; > + } > + err = devm_request_threaded_irq(dev, client->irq, NULL, > + dir685_tk_irq_thread, > + IRQF_ONESHOT, > + "dir685-tk", > + tk); > + if (err) { > + dev_err(dev, "can't request IRQ\n"); > + return err; > + } > + > + i2c_set_clientdata(client, tk); Dropped as noone is using it at the moment. > + > + return 0; > +} > + > +static const struct i2c_device_id dir685_tk_id[] = { > + { "dir685tk", 0 }, > + { } > +}; > + > +static const struct of_device_id dir685_tk_of_match[] = { > + { .compatible = "dlink,dir685-touchkeys" }, > + {}, > +}; > +MODULE_DEVICE_TABLE(of, dir685_tk_of_match); > + > +static struct i2c_driver dir685_tk_i2c_driver = { > + .driver = { > + .name = "dlin-dir685-touchkeys", > + .of_match_table = of_match_ptr(dir685_tk_of_match), > + }, > + .probe = dir685_tk_probe, > + .id_table = dir685_tk_id, > +}; > +MODULE_DEVICE_TABLE(i2c, dir685_tk_id); > + > +module_i2c_driver(dir685_tk_i2c_driver); > + > +MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>"); > +MODULE_DESCRIPTION("D-Link DIR-685 touchkeys driver"); > +MODULE_LICENSE("GPL"); > -- > 2.9.4 > Thanks. -- Dmitry -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/MAINTAINERS b/MAINTAINERS index 96753be12026..eea776eec996 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3779,6 +3779,12 @@ S: Supported F: drivers/input/touchscreen/cyttsp* F: include/linux/input/cyttsp.h +D-LINK DIR-685 TOUCHKEYS DRIVER +M: Linus Walleij <linus.walleij@linaro.org> +L: linux-input@vger.kernel.org +S: Supported +F: drivers/input/dlink-dir685-touchkeys.c + DALLAS/MAXIM DS1685-FAMILY REAL TIME CLOCK M: Joshua Kinard <kumba@gentoo.org> S: Maintained diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 97acd6524ad7..4c4ab1ced235 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -178,6 +178,17 @@ config KEYBOARD_CLPS711X To compile this driver as a module, choose M here: the module will be called clps711x-keypad. +config KEYBOARD_DLINK_DIR685 + tristate "D-Link DIR-685 touchkeys support" + depends on I2C + default ARCH_GEMINI + help + If you say yes here you get support for the D-Link DIR-685 + touchkeys. + + To compile this driver as a module, choose M here: the + module will be called dlink-dir685-touchkeys. + config KEYBOARD_LKKBD tristate "DECstation/VAXstation LK201/LK401 keyboard" select SERIO diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index 7d9acff819a7..d2338bacdad1 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_KEYBOARD_CAP11XX) += cap11xx.o obj-$(CONFIG_KEYBOARD_CLPS711X) += clps711x-keypad.o obj-$(CONFIG_KEYBOARD_CROS_EC) += cros_ec_keyb.o obj-$(CONFIG_KEYBOARD_DAVINCI) += davinci_keyscan.o +obj-$(CONFIG_KEYBOARD_DLINK_DIR685) += dlink-dir685-touchkeys.o obj-$(CONFIG_KEYBOARD_EP93XX) += ep93xx_keypad.o obj-$(CONFIG_KEYBOARD_GOLDFISH_EVENTS) += goldfish_events.o obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o diff --git a/drivers/input/keyboard/dlink-dir685-touchkeys.c b/drivers/input/keyboard/dlink-dir685-touchkeys.c new file mode 100644 index 000000000000..6d6f60963e3c --- /dev/null +++ b/drivers/input/keyboard/dlink-dir685-touchkeys.c @@ -0,0 +1,157 @@ +/* + * D-Link DIR-685 router I2C-based Touchkeys input driver + * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org> + * + * This is a one-off touchkey controller based on the Cypress Semiconductor + * CY8C214 MCU with some firmware in its internal 8KB flash. The circuit + * board inside the router is named E119921 + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/input.h> +#include <linux/slab.h> +#include <linux/bitops.h> + +struct dir685_touchkeys { + struct device *dev; + struct i2c_client *client; + struct input_dev *input; + unsigned long cur_key; + u16 codes[7]; +}; + +static irqreturn_t dir685_tk_irq_thread(int irq, void *data) +{ + struct dir685_touchkeys *tk = data; + const int num_bits = min_t(int, ARRAY_SIZE(tk->codes), 16); + unsigned long changed; + u8 buf[6]; + unsigned long key; + int i; + int err; + + memset(buf, 0, sizeof(buf)); + err = i2c_master_recv(tk->client, buf, sizeof(buf)); + if (err != sizeof(buf)) { + dev_err(tk->dev, "short read %d\n", err); + return IRQ_HANDLED; + } + + dev_dbg(tk->dev, "IN: %02x, %02x, %02x, %02x, %02x, %02x\n", + buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]); + key = be16_to_cpup((__le16 *) &buf[4]); + + /* Figure out if any bits went high or low since last message */ + changed = tk->cur_key ^ key; + for_each_set_bit(i, &changed, num_bits) { + dev_dbg(tk->dev, "key %d is %s\n", i, + test_bit(i, &key) ? "down" : "up"); + input_report_key(tk->input, tk->codes[i], test_bit(i, &key)); + } + + /* Store currently down keys */ + tk->cur_key = key; + input_sync(tk->input); + + return IRQ_HANDLED; +} + +static int dir685_tk_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct dir685_touchkeys *tk; + struct device *dev = &client->dev; + u8 bl_data[] = { 0xa7, 0x40 }; + int err; + int i; + + tk = devm_kzalloc(&client->dev, sizeof(*tk), GFP_KERNEL); + if (!tk) + return -ENOMEM; + + tk->input = devm_input_allocate_device(dev); + if (!tk->input) + return -ENOMEM; + + tk->client = client; + tk->dev = dev; + + tk->input->keycodesize = sizeof(u16); + tk->input->keycodemax = ARRAY_SIZE(tk->codes); + tk->input->keycode = tk->codes; + tk->codes[0] = KEY_UP; + tk->codes[1] = KEY_DOWN; + tk->codes[2] = KEY_LEFT; + tk->codes[3] = KEY_RIGHT; + tk->codes[4] = KEY_ENTER; + tk->codes[5] = KEY_WPS_BUTTON; + /* + * This key appears in the vendor driver, but I have + * not been able to provoke it. + */ + tk->codes[6] = KEY_O; + + __set_bit(EV_KEY, tk->input->evbit); + for (i = 0; i < ARRAY_SIZE(tk->codes); i++) + __set_bit(tk->codes[i], tk->input->keybit); + + tk->input->name = "D-Link DIR-685 touchkeys"; + input_set_drvdata(tk->input, tk); + + err = input_register_device(tk->input); + if (err) + return err; + + /* Set up the brightness to max level */ + err = i2c_master_send(client, bl_data, sizeof(bl_data)); + if (err != sizeof(bl_data)) + dev_warn(tk->dev, "error setting up brightness level\n"); + + if (!client->irq) { + dev_err(dev, "no IRQ on the I2C device\n"); + return -ENODEV; + } + err = devm_request_threaded_irq(dev, client->irq, NULL, + dir685_tk_irq_thread, + IRQF_ONESHOT, + "dir685-tk", + tk); + if (err) { + dev_err(dev, "can't request IRQ\n"); + return err; + } + + i2c_set_clientdata(client, tk); + + return 0; +} + +static const struct i2c_device_id dir685_tk_id[] = { + { "dir685tk", 0 }, + { } +}; + +static const struct of_device_id dir685_tk_of_match[] = { + { .compatible = "dlink,dir685-touchkeys" }, + {}, +}; +MODULE_DEVICE_TABLE(of, dir685_tk_of_match); + +static struct i2c_driver dir685_tk_i2c_driver = { + .driver = { + .name = "dlin-dir685-touchkeys", + .of_match_table = of_match_ptr(dir685_tk_of_match), + }, + .probe = dir685_tk_probe, + .id_table = dir685_tk_id, +}; +MODULE_DEVICE_TABLE(i2c, dir685_tk_id); + +module_i2c_driver(dir685_tk_i2c_driver); + +MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>"); +MODULE_DESCRIPTION("D-Link DIR-685 touchkeys driver"); +MODULE_LICENSE("GPL");
This adds support for the D-Link DIR-685 touchkeys found in the router with this name. The vendor code calles this a "touchpad" but we are registering it here under its real name. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- ChangeLog v2->v3: - Switch "KEY_W" to "KEY_WPS_BUTTON" as apropriate. - Add comment about the mysterious "KEY_O". ChangeLog v1->v2: - Change the whole touchpad->touchkey naming scheme, even in the device tree bindings. - Embedd the keycodes directly into the state container and open code the key assignments. - Use Dmitry's suggested XOR loop to detect key state changes. - Drop <linux/mutex.h> add <linux/bitops.h> - Drop dependency on the OF config symbol. - Rename all "ret" to "err". - Drop driver dev_info() announcement. --- MAINTAINERS | 6 + drivers/input/keyboard/Kconfig | 11 ++ drivers/input/keyboard/Makefile | 1 + drivers/input/keyboard/dlink-dir685-touchkeys.c | 157 ++++++++++++++++++++++++ 4 files changed, 175 insertions(+) create mode 100644 drivers/input/keyboard/dlink-dir685-touchkeys.c -- 2.9.4 -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html