new file mode 100644
@@ -0,0 +1,242 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2024 Collabora Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/maxim,max9296a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX9296A GMSL2 to CSI-2 Deserializer
+
+maintainers:
+ - Cosmin Tanislav <cosmin.tanislav@analog.com>
+
+description: >
+ The MAX9296A deserializer converts single or dual serial inputs to
+ MIPI CSI-2 outputs. The GMSL2 links operate at a fixed rate of 3Gbps
+ or 6Gbps in the forward direction and 187.5Mbps in the reverse
+ direction. In GMSL1 mode, each serial link can be paired with 3.12Gbps
+ or 1.5Gbps GMSL1 serializers or operate up to 4.5Gbps with GMSL2
+ serializers with GMSL1 backward compatibility. The MAX9296A supports
+ mixed GMSL2 and GMSL1 links. The serial inputs operate independently,
+ allowing videos with different timings and resolutions to be received
+ on each input.
+
+ MAX96716A supports both tunnel and pixel mode.
+
+ MAX96792A supports both tunnel and pixel mode, and has two GMSL3 links.
+
+properties:
+ compatible:
+ enum:
+ - maxim,max9296a
+ - maxim,max96716a
+ - maxim,max96792a
+
+ reg:
+ maxItems: 1
+
+ powerdown-gpios:
+ maxItems: 1
+ description: Specifier for the GPIO connected to the PWDNB pin.
+
+ port0-poc-supply:
+ description: Regulator providing Power over Coax for GMSL port 0
+
+ port1-poc-supply:
+ description: Regulator providing Power over Coax for GMSL port 1
+
+ i2c-alias-pool:
+ maxItems: 2
+
+ i2c-atr:
+ type: object
+ additionalProperties: false
+
+ properties:
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ patternProperties:
+ '^i2c@[0-1]$':
+ $ref: /schemas/i2c/i2c-controller.yaml#
+ unevaluatedProperties: false
+ properties:
+ reg:
+ items:
+ minimum: 0
+ maximum: 1
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ patternProperties:
+ '^port@[0-1]$':
+ $ref: /schemas/graph.yaml#/properties/port
+ description: GMSL Input ports 0-1
+
+ '^port@[2-3]$':
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: CSI-2 Output ports 0-1
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ lane-polarities:
+ minItems: 1
+ maxItems: 5
+
+ link-frequencies:
+ maxItems: 1
+
+ required:
+ - data-lanes
+
+ anyOf:
+ - required:
+ - port@2
+ - required:
+ - port@3
+
+required:
+ - compatible
+ - reg
+ - ports
+
+additionalProperties: false
+
+allOf:
+ - $ref: /schemas/i2c/i2c-atr.yaml#
+
+dependentRequired:
+ i2c-atr: [i2c-alias-pool]
+ i2c-alias-pool: [i2c-atr]
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/media/video-interfaces.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ deserializer@28 {
+ compatible = "maxim,max9296a";
+ reg = <0x28>;
+ powerdown-gpios = <&main_gpio0 37 GPIO_ACTIVE_LOW>;
+
+ i2c-alias-pool = <0x40 0x41>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ des_gmsl_in_0: endpoint {
+ remote-endpoint = <&ser_0_gmsl_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ des_gmsl_in_1: endpoint {
+ remote-endpoint = <&ser_1_gmsl_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ des_csi_out: endpoint {
+ data-lanes = <1 2 3 4>;
+ link-frequencies = /bits/ 64 <400000000>;
+ remote-endpoint = <&csi_in>;
+ };
+ };
+ };
+
+ i2c-atr {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ serializer@40 {
+ compatible = "maxim,max96717";
+ reg = <0x40>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ #clock-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ ser_0_csi_in: endpoint {
+ data-lanes = <1 2>;
+ remote-endpoint = <&sensor_0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ ser_0_gmsl_out: endpoint {
+ remote-endpoint = <&des_gmsl_in_0>;
+ };
+ };
+ };
+ };
+ };
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ serializer@40 {
+ compatible = "maxim,max96717";
+ reg = <0x40>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ #clock-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ ser_1_csi_in: endpoint {
+ data-lanes = <1 2>;
+ remote-endpoint = <&sensor_1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ ser_1_gmsl_out: endpoint {
+ remote-endpoint = <&des_gmsl_in_1>;
+ };
+ };
+ };
+ };
+ };
+ };
+ };
+ };
+...
@@ -14221,6 +14221,12 @@ S: Maintained
F: Documentation/devicetree/bindings/iio/proximity/maxbotix,mb1232.yaml
F: drivers/iio/proximity/mb1232.c
+MAXIM GMSL2 SERIALIZERS AND DESERIALIZERS
+M: Cosmin Tanislav <cosmin.tanislav@analog.com>
+L: linux-media@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/media/i2c/maxim,max9296a.yaml
+
MAXIM MAX11205 DRIVER
M: Ramona Bolboaca <ramona.bolboaca@analog.com>
L: linux-iio@vger.kernel.org
The MAX9296A deserializer converts single or dual serial inputs to MIPI CSI-2 outputs. The GMSL2 links operate at a fixed rate of 3Gbps or 6Gbps in the forward direction and 187.5Mbps in the reverse direction. In GMSL1 mode, each serial link can be paired with 3.12Gbps or 1.5Gbps GMSL1 serializers or operate up to 4.5Gbps with GMSL2 serializers with GMSL1 backward compatibility. The MAX9296A supports mixed GMSL2 and GMSL1 links. The serial inputs operate independently, allowing videos with different timings and resolutions to be received on each input. MAX96716A supports both tunnel and pixel mode. MAX96792A supports both tunnel and pixel mode, and has two GMSL3 links. Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com> --- .../bindings/media/i2c/maxim,max9296a.yaml | 242 ++++++++++++++++++ MAINTAINERS | 6 + 2 files changed, 248 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/maxim,max9296a.yaml