| Message ID | 20241220160530.444864-1-mitltlatltl@gmail.com |
|---|---|
| Headers | show |
| Series | arm64: dts: qcom: Introduce Huawei Matebook E Go | expand |
On 20.12.2024 5:05 PM, Pengyu Luo wrote: > Add an initial devicetree for the Huawei Matebook E Go, which is based on > sc8280xp. > > There are 3 variants, Huawei released first 2 at the same time. > Huawei Matebook E Go LTE(sc8180x), codename should be gaokun2. > Huawei Matebook E Go(sc8280xp@3.0GHz), codename is gaokun3. > Huawei Matebook E Go 2023(sc8280xp@2.69GHz). > > We add support for the latter two variants. > > This work started by Tianyu Gao and Xuecong Chen, they made the > devicetree based on existing work(i.e. the Lenovo X13s and the > Qualcomm CRD), it can boot with framebuffer. > So this looks good now, but [...] > + chosen { > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + framebuffer0: framebuffer@c6200000 { > + compatible = "simple-framebuffer"; > + reg = <0x0 0xc6200000 0x0 0x02400000>; > + width = <1600>; > + height = <2560>; > + stride = <(1600 * 4)>; > + format = "a8r8g8b8"; > + }; > + }; I still don't understand why efifb doesn't work for you. Could you share your .config file? Konrad
On Sat, 21 Dec 2024 00:05:27 +0800, Pengyu Luo wrote: > Add support for the SC8280XP-based Huawei Matebook E Go (sc8280xp) > > Applied, thanks! [1/3] dt-bindings: arm: qcom: Document Huawei Matebook E Go (sc8280xp) commit: f99c52954a82601d4d46677e9399e87c8b6c1bb3 [3/3] arm64: dts: qcom: sc8280xp: Add Huawei Matebook E Go (sc8280xp) commit: 1401ae5c28a259f684ccba7b460884b88f863596 Best regards,
Add support for the SC8280XP-based Huawei Matebook E Go (sc8280xp) Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com> --- Changes in v2: - use Co-developed-by: tag (Konrad) - follow this order (property-n property-names) (Konrad) - add a label for tablet mode switch (Konrad) - handle line breaks properly (Konrad) - remove the wlan calibration variant (Konrad) - drop the venus node, as upstream has not supported it now - Link to v1: https://lore.kernel.org/linux-arm-msm/20241211153754.356476-1-mitltlatltl@gmail.com --- Pengyu Luo (3): dt-bindings: arm: qcom: Document Huawei Matebook E Go (sc8280xp) firmware: qcom: scm: Allow QSEECOM on Huawei Matebook E Go (sc8280xp) arm64: dts: qcom: sc8280xp: Add Huawei Matebook E Go (sc8280xp) .../devicetree/bindings/arm/qcom.yaml | 1 + arch/arm64/boot/dts/qcom/Makefile | 1 + .../boot/dts/qcom/sc8280xp-huawei-gaokun3.dts | 1318 +++++++++++++++++ drivers/firmware/qcom/qcom_scm.c | 1 + 4 files changed, 1321 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts