mbox series

[v2,0/4] Add SPI0 support for IPQ5424

Message ID 20241217091308.3253897-1-quic_mmanikan@quicinc.com
Headers show
Series Add SPI0 support for IPQ5424 | expand

Message

Manikanta Mylavarapu Dec. 17, 2024, 9:13 a.m. UTC 
Add an SPI0 node to the IPQ5424 device tree and update the relevant
bindings, GPIO pin mappings accordingly.

Changes in V2:
	- Fixed all review comments from Konrad Dybico, Krzysztof
	  Kozlowski
	- Detailed change logs are added to the respective patches 

V1 can be found at:
https://lore.kernel.org/linux-arm-msm/20241122124505.1688436-1-quic_mmanikan@quicinc.com/

Manikanta Mylavarapu (4):
  dt-bindings: pinctrl: qcom: update spi0 function
  pinctrl: qcom: ipq5424: split spi0 pin group
  arm64: dts: qcom: ipq5424: add spi0 node
  arm64: dts: qcom: ipq5424: configure spi0 node for rdp466

 .../bindings/pinctrl/qcom,ipq5424-tlmm.yaml   |  4 +-
 arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts   | 43 +++++++++++++++++++
 arch/arm64/boot/dts/qcom/ipq5424.dtsi         | 11 +++++
 drivers/pinctrl/qcom/pinctrl-ipq5424.c        | 34 +++++++++++----
 4 files changed, 82 insertions(+), 10 deletions(-)


base-commit: e25c8d66f6786300b680866c0e0139981273feba

Comments

Konrad Dybcio Dec. 19, 2024, 8:36 p.m. UTC | #1 
On 17.12.2024 10:13 AM, Manikanta Mylavarapu wrote:
> Add SPI0 node for IPQ5424 SoC.
> 
> Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
> ---
> Changes in V2:
> 	- No change
> 
>  arch/arm64/boot/dts/qcom/ipq5424.dtsi | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/ipq5424.dtsi b/arch/arm64/boot/dts/qcom/ipq5424.dtsi
> index 5e219f900412..b4d736cd8610 100644
> --- a/arch/arm64/boot/dts/qcom/ipq5424.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq5424.dtsi
> @@ -201,6 +201,17 @@ uart1: serial@1a84000 {
>  				clock-names = "se";
>  				interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
>  			};
> +
> +			spi0: spi@1a90000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0 0x01a90000 0 0x4000>;
> +				clocks = <&gcc GCC_QUPV3_SPI0_CLK>;

This register base suggests SPI4 for both the name and clock

The existing UART1 similarly should be UART0

Konrad
Manikanta Mylavarapu Dec. 20, 2024, 7:25 a.m. UTC | #2 
On 12/20/2024 2:06 AM, Konrad Dybcio wrote:
> On 17.12.2024 10:13 AM, Manikanta Mylavarapu wrote:
>> Add SPI0 node for IPQ5424 SoC.
>>
>> Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
>> ---
>> Changes in V2:
>> 	- No change
>>
>>  arch/arm64/boot/dts/qcom/ipq5424.dtsi | 11 +++++++++++
>>  1 file changed, 11 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/ipq5424.dtsi b/arch/arm64/boot/dts/qcom/ipq5424.dtsi
>> index 5e219f900412..b4d736cd8610 100644
>> --- a/arch/arm64/boot/dts/qcom/ipq5424.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/ipq5424.dtsi
>> @@ -201,6 +201,17 @@ uart1: serial@1a84000 {
>>  				clock-names = "se";
>>  				interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
>>  			};
>> +
>> +			spi0: spi@1a90000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0 0x01a90000 0 0x4000>;
>> +				clocks = <&gcc GCC_QUPV3_SPI0_CLK>;
> 
> This register base suggests SPI4 for both the name and clock
> 

Hi Konrad,

Thank you for reviewing the patch.

The IPQ5424 doesn't have SPI4, and according to the Qualcomm IPQ5424 register catalog,
the register base maps to SPI0.

> The existing UART1 similarly should be UART0

I didn't understand your comment. UART0 not yet posted.
In IPQ5424, UART1 is the main UART used for console
and UART0 is HS-UART used for some debugging purpose.

Thanks & Regards,
Manikanta.
Manikanta Mylavarapu Dec. 20, 2024, 10:04 a.m. UTC | #3 
On 12/20/2024 3:15 PM, Konrad Dybcio wrote:
> On 20.12.2024 8:25 AM, Manikanta Mylavarapu wrote:
>>
>>
>> On 12/20/2024 2:06 AM, Konrad Dybcio wrote:
>>> On 17.12.2024 10:13 AM, Manikanta Mylavarapu wrote:
>>>> Add SPI0 node for IPQ5424 SoC.
>>>>
>>>> Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
>>>> ---
>>>> Changes in V2:
>>>> 	- No change
>>>>
>>>>  arch/arm64/boot/dts/qcom/ipq5424.dtsi | 11 +++++++++++
>>>>  1 file changed, 11 insertions(+)
>>>>
>>>> diff --git a/arch/arm64/boot/dts/qcom/ipq5424.dtsi b/arch/arm64/boot/dts/qcom/ipq5424.dtsi
>>>> index 5e219f900412..b4d736cd8610 100644
>>>> --- a/arch/arm64/boot/dts/qcom/ipq5424.dtsi
>>>> +++ b/arch/arm64/boot/dts/qcom/ipq5424.dtsi
>>>> @@ -201,6 +201,17 @@ uart1: serial@1a84000 {
>>>>  				clock-names = "se";
>>>>  				interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
>>>>  			};
>>>> +
>>>> +			spi0: spi@1a90000 {
>>>> +				compatible = "qcom,geni-spi";
>>>> +				reg = <0 0x01a90000 0 0x4000>;
>>>> +				clocks = <&gcc GCC_QUPV3_SPI0_CLK>;
>>>
>>> This register base suggests SPI4 for both the name and clock
>>>
>>
>> Hi Konrad,
>>
>> Thank you for reviewing the patch.
>>
>> The IPQ5424 doesn't have SPI4, and according to the Qualcomm IPQ5424 register catalog,
>> the register base maps to SPI0.
> 
> I'm looking at that register catalog and what you added here is
> called SE4
> 

I understand your point and will rename it to SPI4.

Thanks & Regards,
Manikanta.

>>
>>> The existing UART1 similarly should be UART0
>>
>> I didn't understand your comment. UART0 not yet posted.
>> In IPQ5424, UART1 is the main UART used for console
>> and UART0 is HS-UART used for some debugging purpose.
> 
> Here it's my mistake, 0x01a84000 is SE1 indeed
> 
> Konrad