diff mbox series

[12/16] dt-bindings: media: camss: Add qcom,sm8550-camss binding

Message ID 20241211140738.3835588-13-quic_depengs@quicinc.com
State Superseded
Headers show
Series media: qcom: camss: Add sm8550 support | expand

Commit Message

Depeng Shao Dec. 11, 2024, 2:07 p.m. UTC
Add bindings for qcom,sm8550-camss in order to support the camera
subsystem for sm8550.

Co-developed-by: Yongsheng Li <quic_yon@quicinc.com>
Signed-off-by: Yongsheng Li <quic_yon@quicinc.com>
Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
---
 .../bindings/media/qcom,sm8550-camss.yaml     | 604 ++++++++++++++++++
 1 file changed, 604 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/qcom,sm8550-camss.yaml

Comments

Depeng Shao Dec. 12, 2024, 1:39 p.m. UTC | #1
Hi Bryan,

On 12/11/2024 11:17 PM, Bryan O'Donoghue wrote:
> On 11/12/2024 14:07, Depeng Shao wrote:
>> +            interconnects = <&gem_noc MASTER_APPSS_PROC 0 &config_noc 
>> SLAVE_CAMERA_CFG 0>,
>> +                            <&mmss_noc MASTER_CAMNOC_HF 0 &mc_virt 
>> SLAVE_EBI1 0>,
>> +                            <&mmss_noc MASTER_CAMNOC_ICP 0 &mc_virt 
>> SLAVE_EBI1 0>,
>> +                            <&mmss_noc MASTER_CAMNOC_SF 0 &mc_virt 
>> SLAVE_EBI1 0>;
> 
> Have a look at 7280.
> 
> The parameters to the NOC should be named.
> 
> https://lore.kernel.org/all/20241206191900.2545069-2- 
> quic_vikramsa@quicinc.com
> 

Do you mean use QCOM_ICC_TAG_ACTIVE_ONLY and QCOM_ICC_TAG_ALWAYS?
And, I will also remove the ICP and SF interconnects which are used by 
offline HW, rather than real time VFE.

Thanks,
Depeng
Bryan O'Donoghue Dec. 12, 2024, 2:04 p.m. UTC | #2
On 12/12/2024 13:39, Depeng Shao wrote:
>> Have a look at 7280.
>>
>> The parameters to the NOC should be named.
>>
>> https://lore.kernel.org/all/20241206191900.2545069-2- 
>> quic_vikramsa@quicinc.com
>>
> 
> Do you mean use QCOM_ICC_TAG_ACTIVE_ONLY and QCOM_ICC_TAG_ALWAYS?
> And, I will also remove the ICP and SF interconnects which are used by 
> offline HW, rather than real time VFE.

I was asking about the TAG names.

Re: removing interconnects that's up to you, provided the removal is 
tested on real hardware.

---
bod
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/media/qcom,sm8550-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sm8550-camss.yaml
new file mode 100644
index 000000000000..c493524a1add
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,sm8550-camss.yaml
@@ -0,0 +1,604 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,sm8550-camss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8550 Camera Subsystem (CAMSS)
+
+maintainers:
+  - Depeng Shao <quic_depengs@quicinc.com>
+
+description:
+  The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms.
+
+properties:
+  compatible:
+    const: qcom,sm8550-camss
+
+  reg:
+    maxItems: 19
+
+  reg-names:
+    items:
+      - const: csid0
+      - const: csid1
+      - const: csid2
+      - const: csid_lite0
+      - const: csid_lite1
+      - const: csid_wrapper
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: csiphy3
+      - const: csiphy4
+      - const: csiphy5
+      - const: csiphy6
+      - const: csiphy7
+      - const: vfe0
+      - const: vfe1
+      - const: vfe2
+      - const: vfe_lite0
+      - const: vfe_lite1
+
+  clocks:
+    maxItems: 36
+
+  clock-names:
+    items:
+      - const: camnoc_axi
+      - const: cpas_ahb
+      - const: cpas_fast_ahb_clk
+      - const: cpas_ife_lite
+      - const: cpas_vfe0
+      - const: cpas_vfe1
+      - const: cpas_vfe2
+      - const: csid
+      - const: csiphy0
+      - const: csiphy0_timer
+      - const: csiphy1
+      - const: csiphy1_timer
+      - const: csiphy2
+      - const: csiphy2_timer
+      - const: csiphy3
+      - const: csiphy3_timer
+      - const: csiphy4
+      - const: csiphy4_timer
+      - const: csiphy5
+      - const: csiphy5_timer
+      - const: csiphy6
+      - const: csiphy6_timer
+      - const: csiphy7
+      - const: csiphy7_timer
+      - const: csiphy_rx
+      - const: gcc_axi_hf
+      - const: vfe0
+      - const: vfe0_fast_ahb
+      - const: vfe1
+      - const: vfe1_fast_ahb
+      - const: vfe2
+      - const: vfe2_fast_ahb
+      - const: vfe_lite
+      - const: vfe_lite_ahb
+      - const: vfe_lite_cphy_rx
+      - const: vfe_lite_csid
+
+  interrupts:
+    maxItems: 18
+
+  interrupt-names:
+    items:
+      - const: csid0
+      - const: csid1
+      - const: csid2
+      - const: csid_lite0
+      - const: csid_lite1
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: csiphy3
+      - const: csiphy4
+      - const: csiphy5
+      - const: csiphy6
+      - const: csiphy7
+      - const: vfe0
+      - const: vfe1
+      - const: vfe2
+      - const: vfe_lite0
+      - const: vfe_lite1
+
+  interconnects:
+    maxItems: 4
+
+  interconnect-names:
+    items:
+      - const: ahb
+      - const: hf_0_mnoc
+      - const: icp_mnoc
+      - const: sf_0_mnoc
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    items:
+      - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: IFE2 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: Titan GDSC - Titan ISP Block, Global Distributed Switch Controller.
+
+  power-domain-names:
+    items:
+      - const: ife0
+      - const: ife1
+      - const: ife2
+      - const: top
+
+  vdda-phy-supply:
+    description:
+      Phandle to a regulator supply to PHY core block.
+
+  vdda-pll-supply:
+    description:
+      Phandle to 1.2V regulator supply to PHY refclk pll block.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    description:
+      CSI input ports.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data on CSI0.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data on CSI1.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@2:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data on CSI2.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@3:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data on CSI3.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@4:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data on CSI4.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@5:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data on CSI5.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@6:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data on CSI6.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@7:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data on CSI7.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - interconnects
+  - interconnect-names
+  - iommus
+  - power-domains
+  - power-domain-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,sm8550-camcc.h>
+    #include <dt-bindings/clock/qcom,sm8550-gcc.h>
+    #include <dt-bindings/interconnect/qcom,sm8550-rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        isp@acb7000 {
+            compatible = "qcom,sm8550-camss";
+
+            reg = <0 0x0acb7000 0 0xd00>,
+                  <0 0x0acb9000 0 0xd00>,
+                  <0 0x0acbb000 0 0xd00>,
+                  <0 0x0acca000 0 0xa00>,
+                  <0 0x0acce000 0 0xa00>,
+                  <0 0x0acb6000 0 0x1000>,
+                  <0 0x0ace4000 0 0x2000>,
+                  <0 0x0ace6000 0 0x2000>,
+                  <0 0x0ace8000 0 0x2000>,
+                  <0 0x0acea000 0 0x2000>,
+                  <0 0x0acec000 0 0x2000>,
+                  <0 0x0acee000 0 0x2000>,
+                  <0 0x0acf0000 0 0x2000>,
+                  <0 0x0acf2000 0 0x2000>,
+                  <0 0x0ac62000 0 0xf000>,
+                  <0 0x0ac71000 0 0xf000>,
+                  <0 0x0ac80000 0 0xf000>,
+                  <0 0x0accb000 0 0x1800>,
+                  <0 0x0accf000 0 0x1800>;
+
+            reg-names = "csid0",
+                        "csid1",
+                        "csid2",
+                        "csid_lite0",
+                        "csid_lite1",
+                        "csid_wrapper",
+                        "csiphy0",
+                        "csiphy1",
+                        "csiphy2",
+                        "csiphy3",
+                        "csiphy4",
+                        "csiphy5",
+                        "csiphy6",
+                        "csiphy7",
+                        "vfe0",
+                        "vfe1",
+                        "vfe2",
+                        "vfe_lite0",
+                        "vfe_lite1";
+
+            clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+                     <&camcc CAM_CC_CPAS_AHB_CLK>,
+                     <&camcc CAM_CC_CPAS_FAST_AHB_CLK>,
+                     <&camcc CAM_CC_CPAS_IFE_LITE_CLK>,
+                     <&camcc CAM_CC_CPAS_IFE_0_CLK>,
+                     <&camcc CAM_CC_CPAS_IFE_1_CLK>,
+                     <&camcc CAM_CC_CPAS_IFE_2_CLK>,
+                     <&camcc CAM_CC_CSID_CLK>,
+                     <&camcc CAM_CC_CSIPHY0_CLK>,
+                     <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY1_CLK>,
+                     <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY2_CLK>,
+                     <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY3_CLK>,
+                     <&camcc CAM_CC_CSI3PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY4_CLK>,
+                     <&camcc CAM_CC_CSI4PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY5_CLK>,
+                     <&camcc CAM_CC_CSI5PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY6_CLK>,
+                     <&camcc CAM_CC_CSI6PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY7_CLK>,
+                     <&camcc CAM_CC_CSI7PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSID_CSIPHY_RX_CLK>,
+                     <&gcc GCC_CAMERA_HF_AXI_CLK>,
+                     <&camcc CAM_CC_IFE_0_CLK>,
+                     <&camcc CAM_CC_IFE_0_FAST_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_1_CLK>,
+                     <&camcc CAM_CC_IFE_1_FAST_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_2_CLK>,
+                     <&camcc CAM_CC_IFE_2_FAST_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CSID_CLK>;
+
+            clock-names = "camnoc_axi",
+                          "cpas_ahb",
+                          "cpas_fast_ahb_clk",
+                          "cpas_ife_lite",
+                          "cpas_vfe0",
+                          "cpas_vfe1",
+                          "cpas_vfe2",
+                          "csid",
+                          "csiphy0",
+                          "csiphy0_timer",
+                          "csiphy1",
+                          "csiphy1_timer",
+                          "csiphy2",
+                          "csiphy2_timer",
+                          "csiphy3",
+                          "csiphy3_timer",
+                          "csiphy4",
+                          "csiphy4_timer",
+                          "csiphy5",
+                          "csiphy5_timer",
+                          "csiphy6",
+                          "csiphy6_timer",
+                          "csiphy7",
+                          "csiphy7_timer",
+                          "csiphy_rx",
+                          "gcc_axi_hf",
+                          "vfe0",
+                          "vfe0_fast_ahb",
+                          "vfe1",
+                          "vfe1_fast_ahb",
+                          "vfe2",
+                          "vfe2_fast_ahb",
+                          "vfe_lite",
+                          "vfe_lite_ahb",
+                          "vfe_lite_cphy_rx",
+                          "vfe_lite_csid";
+
+            interrupts = <GIC_SPI 601 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 603 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 431 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 605 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 376 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 278 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 602 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 604 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 688 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 606 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 377 IRQ_TYPE_EDGE_RISING>;
+
+            interrupt-names = "csid0",
+                              "csid1",
+                              "csid2",
+                              "csid_lite0",
+                              "csid_lite1",
+                              "csiphy0",
+                              "csiphy1",
+                              "csiphy2",
+                              "csiphy3",
+                              "csiphy4",
+                              "csiphy5",
+                              "csiphy6",
+                              "csiphy7",
+                              "vfe0",
+                              "vfe1",
+                              "vfe2",
+                              "vfe_lite0",
+                              "vfe_lite1";
+
+            interconnects = <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_CAMERA_CFG 0>,
+                            <&mmss_noc MASTER_CAMNOC_HF 0 &mc_virt SLAVE_EBI1 0>,
+                            <&mmss_noc MASTER_CAMNOC_ICP 0 &mc_virt SLAVE_EBI1 0>,
+                            <&mmss_noc MASTER_CAMNOC_SF 0 &mc_virt SLAVE_EBI1 0>;
+            interconnect-names = "ahb",
+                                 "hf_0_mnoc",
+                                 "icp_mnoc",
+                                 "sf_0_mnoc";
+
+            iommus = <&apps_smmu 0x800 0x20>;
+
+            power-domains = <&camcc CAM_CC_IFE_0_GDSC>,
+                            <&camcc CAM_CC_IFE_1_GDSC>,
+                            <&camcc CAM_CC_IFE_2_GDSC>,
+                            <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+            power-domain-names = "ife0",
+                                 "ife1",
+                                 "ife2",
+                                 "top";
+
+            vdda-phy-supply = <&vreg_l1e_0p88>;
+            vdda-pll-supply = <&vreg_l3e_1p2>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    csiphy_ep0: endpoint@0 {
+                        reg = <0>;
+                        clock-lanes = <7>;
+                        data-lanes = <0 1>;
+                        remote-endpoint = <&sensor_ep>;
+                    };
+                };
+            };
+        };
+    };