diff mbox series

[v2] scsi: ufs: core: Do not hold any lock in ufshcd_hba_stop

Message ID 20241128072542.219170-1-avri.altman@wdc.com
State New
Headers show
Series [v2] scsi: ufs: core: Do not hold any lock in ufshcd_hba_stop | expand

Commit Message

Avri Altman Nov. 28, 2024, 7:25 a.m. UTC
This change is motivated by Bart's suggestion in [1], which enables to
further reduce the scsi host lock usage in the ufs driver. The reason
why it make sense, because although the legacy interrupt is disabled by
some but not all ufshcd_hba_stop() callers, it is safe to nest
disable_irq() calls as it checks the irq depth.

[1] https://lore.kernel.org/linux-scsi/c58e4fce-0a74-4469-ad16-f1edbd670728@acm.org/

Suggested-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Avri Altman <avri.altman@wdc.com>

---
Changes compared to v1:
 - ensure that interrupts are only re-enabled after the controller has
   been fully disabled (Bart)
---
 drivers/ufs/core/ufshcd.c | 10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)

Comments

Martin K. Petersen Dec. 10, 2024, 2:46 a.m. UTC | #1
Avri,

> This change is motivated by Bart's suggestion in [1], which enables to
> further reduce the scsi host lock usage in the ufs driver. The reason
> why it make sense, because although the legacy interrupt is disabled
> by some but not all ufshcd_hba_stop() callers, it is safe to nest
> disable_irq() calls as it checks the irq depth.

Applied to 6.14/scsi-staging, thanks!
diff mbox series

Patch

diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index acc3607bbd9c..2e4748077275 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -4811,20 +4811,14 @@  EXPORT_SYMBOL_GPL(ufshcd_make_hba_operational);
  */
 void ufshcd_hba_stop(struct ufs_hba *hba)
 {
-	unsigned long flags;
 	int err;
 
-	/*
-	 * Obtain the host lock to prevent that the controller is disabled
-	 * while the UFS interrupt handler is active on another CPU.
-	 */
-	spin_lock_irqsave(hba->host->host_lock, flags);
+	ufshcd_disable_irq(hba);
 	ufshcd_writel(hba, CONTROLLER_DISABLE,  REG_CONTROLLER_ENABLE);
-	spin_unlock_irqrestore(hba->host->host_lock, flags);
-
 	err = ufshcd_wait_for_register(hba, REG_CONTROLLER_ENABLE,
 					CONTROLLER_ENABLE, CONTROLLER_DISABLE,
 					10, 1);
+	ufshcd_enable_irq(hba);
 	if (err)
 		dev_err(hba->dev, "%s: Controller disable failed\n", __func__);
 }