diff mbox series

[7/7] arm64: dts: broadcom: Fix device tree errors on BCM2712.

Message ID 20241202-dt-bcm2712-fixes-v1-7-fac67cc2f98a@raspberrypi.com
State New
Headers show
Series drm/vc4: Fixup DT and DT binding issues from recent patchset | expand

Commit Message

Dave Stevenson Dec. 2, 2024, 2:32 p.m. UTC
Resolves the issues on clocks and power nodes

Fixes: 4254a647b6c9 ("arm64: dts: broadcom: Add firmware clocks and power nodes to Pi5 DT")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
 arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

Comments

Florian Fainelli Dec. 4, 2024, 7:08 p.m. UTC | #1
On 12/2/24 07:24, Krzysztof Kozlowski wrote:
> On 02/12/2024 15:32, Dave Stevenson wrote:
>> Resolves the issues on clocks and power nodes
> 
> Which issues? Be specific. Such commit is unprecise and not really
> helpful. We see it from the diff that this is "some issue". What we do
> not see is WHY and WHAT the ISSUE is.

A link to the robot email would have probably been helpful in 
understanding which dt checker errors are being fixed here. Regardless, 
as indicated in patch #4, those commit messages will be discarded since 
I intend to fixup the original commits directly into my tree I would not 
put too much effort into addressing any comments there, unless there is 
some piece of information that should have been provided in the original 
commit, in which case I can squash, rather than fixup.
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
index fbc56309660f..26e05601416f 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
@@ -66,11 +66,7 @@  &sdio1 {
 &soc {
 	firmware: firmware {
 		compatible = "raspberrypi,bcm2835-firmware", "simple-mfd";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
 		mboxes = <&mailbox>;
-		dma-ranges;
 
 		firmware_clocks: clocks {
 			compatible = "raspberrypi,firmware-clocks";
@@ -85,6 +81,11 @@  reset: reset {
 
 	power: power {
 		compatible = "raspberrypi,bcm2835-power";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		dma-ranges;
+
 		firmware = <&firmware>;
 		#power-domain-cells = <1>;
 	};