| Message ID | 20241121175851.137414-1-greyxor@protonmail.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Bluetooth: btusb: Add one more ID 0x0489:0xe10a for Qualcomm WCN785x | expand |
This is automated email and please do not reply to this email! Dear submitter, Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series: PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=911571 ---Test result--- Test Summary: CheckPatch PENDING 0.27 seconds GitLint PENDING 0.22 seconds SubjectPrefix PASS 0.12 seconds BuildKernel PASS 24.80 seconds CheckAllWarning PASS 30.40 seconds CheckSparse PASS 30.40 seconds BuildKernel32 PASS 24.38 seconds TestRunnerSetup PASS 433.83 seconds TestRunner_l2cap-tester PASS 20.39 seconds TestRunner_iso-tester FAIL 30.20 seconds TestRunner_bnep-tester PASS 4.83 seconds TestRunner_mgmt-tester PASS 121.41 seconds TestRunner_rfcomm-tester PASS 7.64 seconds TestRunner_sco-tester PASS 15.38 seconds TestRunner_ioctl-tester PASS 8.01 seconds TestRunner_mesh-tester PASS 6.87 seconds TestRunner_smp-tester PASS 7.04 seconds TestRunner_userchan-tester PASS 5.00 seconds IncrementalBuild PENDING 0.60 seconds Details ############################## Test: CheckPatch - PENDING Desc: Run checkpatch.pl script Output: ############################## Test: GitLint - PENDING Desc: Run gitlint Output: ############################## Test: TestRunner_iso-tester - FAIL Desc: Run iso-tester with test-runner Output: WARNING: possible circular locking dependency detected Total: 124, Passed: 119 (96.0%), Failed: 1, Not Run: 4 Failed Test Cases ISO Connect2 Suspend - Success Failed 4.238 seconds ############################## Test: IncrementalBuild - PENDING Desc: Incremental build with the patches in the series Output: --- Regards, Linux Bluetooth
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 279fe6c115fa..b52552a5c13d 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -377,6 +377,8 @@ static const struct usb_device_id quirks_table[] = { BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3623), .driver_info = BTUSB_QCA_WCN6855 | BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0489, 0xe10a), .driver_info = BTUSB_QCA_WCN6855 | + BTUSB_WIDEBAND_SPEECH }, /* Broadcom BCM2035 */ { USB_DEVICE(0x0a5c, 0x2009), .driver_info = BTUSB_BCM92035 },
Add an additional entry with ID (0x0489, 0xe10a) to the usb_device_id table to support the Qualcomm WCN785x. The device information from /sys/kernel/debug/usb/devices is provided below: T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e10a Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 1 Alt= 7 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 65 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 65 Ivl=1ms Signed-off-by: Gregoire Stein <greyxor@protonmail.com> --- drivers/bluetooth/btusb.c | 2 ++ 1 file changed, 2 insertions(+)