| Message ID | 20241111131240.35158-1-vkuznets@redhat.com |
|---|---|
| State | Accepted |
| Commit | 66ef47faa90d838cda131fe1f7776456cc3b59f2 |
| Headers | show |
| Series | [v2] HID: hyperv: streamline driver probe to avoid devres issues | expand |
On Mon, Nov 11, 2024 at 04:50:24PM +0000, Michael Kelley wrote: > From: Vitaly Kuznetsov <vkuznets@redhat.com> Sent: Monday, November 11, 2024 5:13 AM > > > > It was found that unloading 'hid_hyperv' module results in a devres > > complaint: > > > > ... > > hv_vmbus: unregistering driver hid_hyperv > > ------------[ cut here ]------------ > > WARNING: CPU: 2 PID: 3983 at drivers/base/devres.c:691 > > devres_release_group+0x1f2/0x2c0 > > ... > > Call Trace: > > <TASK> > > ? devres_release_group+0x1f2/0x2c0 > > ? __warn+0xd1/0x1c0 > > ? devres_release_group+0x1f2/0x2c0 > > ? report_bug+0x32a/0x3c0 > > ? handle_bug+0x53/0xa0 > > ? exc_invalid_op+0x18/0x50 > > ? asm_exc_invalid_op+0x1a/0x20 > > ? devres_release_group+0x1f2/0x2c0 > > ? devres_release_group+0x90/0x2c0 > > ? rcu_is_watching+0x15/0xb0 > > ? __pfx_devres_release_group+0x10/0x10 > > hid_device_remove+0xf5/0x220 > > device_release_driver_internal+0x371/0x540 > > ? klist_put+0xf3/0x170 > > bus_remove_device+0x1f1/0x3f0 > > device_del+0x33f/0x8c0 > > ? __pfx_device_del+0x10/0x10 > > ? cleanup_srcu_struct+0x337/0x500 > > hid_destroy_device+0xc8/0x130 > > mousevsc_remove+0xd2/0x1d0 [hid_hyperv] > > device_release_driver_internal+0x371/0x540 > > driver_detach+0xc5/0x180 > > bus_remove_driver+0x11e/0x2a0 > > ? __mutex_unlock_slowpath+0x160/0x5e0 > > vmbus_driver_unregister+0x62/0x2b0 [hv_vmbus] > > ... Do we want to mention the other error as well this patch is fixing: [ 68.237679] ------------[ cut here ]------------ [ 68.237681] WARNING: CPU: 23 PID: 579 at drivers/hid/hid-core.c:1262 hid_open_report+0x2c0/0x350 [hid] <snip> [ 68.237741] RIP: 0010:hid_open_report+0x2c0/0x350 [hid] [ 68.237765] Call Trace: [ 68.237767] <TASK> [ 68.237769] ? show_regs+0x6c/0x80 [ 68.237774] ? __warn+0x8d/0x150 [ 68.237777] ? hid_open_report+0x2c0/0x350 [hid] [ 68.237784] ? report_bug+0x182/0x1b0 [ 68.237788] ? handle_bug+0x6e/0xb0 [ 68.237791] ? exc_invalid_op+0x18/0x80 [ 68.237794] ? asm_exc_invalid_op+0x1b/0x20 [ 68.237799] ? hid_open_report+0x2c0/0x350 [hid] [ 68.237805] mousevsc_probe+0x1d5/0x250 [hid_hyperv] [ 68.237808] vmbus_probe+0x3b/0xa0 [hv_vmbus] [ 68.237822] really_probe+0xee/0x3c0 [ 68.237827] __driver_probe_device+0x8c/0x180 [ 68.237830] driver_probe_device+0x24/0xd0 [ 68.237832] __driver_attach_async_helper+0x6e/0x110 [ 68.237835] async_run_entry_fn+0x30/0x130 [ 68.237837] process_one_work+0x178/0x3d0 [ 68.237839] worker_thread+0x2de/0x410 [ 68.237841] ? __pfx_worker_thread+0x10/0x10 [ 68.237843] kthread+0xe1/0x110 [ 68.237847] ? __pfx_kthread+0x10/0x10 [ 68.237849] ret_from_fork+0x44/0x70 [ 68.237852] ? __pfx_kthread+0x10/0x10 [ 68.237854] ret_from_fork_asm+0x1a/0x30 [ 68.237858] </TASK> [ 68.237859] ---[ end trace 0000000000000000 ]--- [ 68.237861] hid-generic 0006:045E:0621.0002: parse failed [ 68.238276] hv_vmbus: probe failed for device 58f75a6d-d949-4320-99e1-a2a2576d581c (-19) > > > > And the issue seems to be that the corresponding devres group is not > > allocated. Normally, devres_open_group() is called from > > __hid_device_probe() but Hyper-V HID driver overrides 'hid_dev->driver' > > with 'mousevsc_hid_driver' stub and basically re-implements > > __hid_device_probe() by calling hid_parse() and hid_hw_start() but not > > devres_open_group(). hid_device_probe() does not call __hid_device_probe() > > for it. Later, when the driver is removed, hid_device_remove() calls > > devres_release_group() as it doesn't check whether hdev->driver was > > initially overridden or not. > > > > The issue seems to be related to the commit 62c68e7cee33 ("HID: ensure > > timely release of driver-allocated resources") but the commit itself seems > > to be correct. > > > > Fix the issue by dropping the 'hid_dev->driver' override and using > > hid_register_driver()/hid_unregister_driver() instead. Alternatively, it > > would have been possible to rely on the default handling but > > HID_CONNECT_DEFAULT implies HID_CONNECT_HIDRAW and it doesn't seem to work > > for mousevsc as-is. > > > > Fixes: 62c68e7cee33 ("HID: ensure timely release of driver-allocated resources") > > Suggested-by: Michael Kelley <mhklinux@outlook.com> > > Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> > > --- > > Changes since v1: > > - Keep custom HID driver for mousevsc but do it properly > > [Michael Kelley]. > > - Add 'Fixes:' tag [Saurabh Singh Sengar]. > > --- > > drivers/hid/hid-hyperv.c | 58 ++++++++++++++++++++++++++++------------ > > 1 file changed, 41 insertions(+), 17 deletions(-) > > > > diff --git a/drivers/hid/hid-hyperv.c b/drivers/hid/hid-hyperv.c > > index f33485d83d24..0fb210e40a41 100644 > > --- a/drivers/hid/hid-hyperv.c > > +++ b/drivers/hid/hid-hyperv.c > > @@ -422,6 +422,25 @@ static int mousevsc_hid_raw_request(struct hid_device *hid, > > return 0; > > } > > > > +static int mousevsc_hid_probe(struct hid_device *hid_dev, const struct hid_device_id *id) > > +{ > > + int ret; > > + > > + ret = hid_parse(hid_dev); > > + if (ret) { > > + hid_err(hid_dev, "parse failed\n"); > > + return ret; > > + } > > + > > + ret = hid_hw_start(hid_dev, HID_CONNECT_HIDINPUT | HID_CONNECT_HIDDEV); > > + if (ret) { > > + hid_err(hid_dev, "hw start failed\n"); > > + return ret; > > + } > > + > > + return 0; > > +} > > + > > static const struct hid_ll_driver mousevsc_ll_driver = { > > .parse = mousevsc_hid_parse, > > .open = mousevsc_hid_open, > > @@ -431,7 +450,16 @@ static const struct hid_ll_driver mousevsc_ll_driver = { > > .raw_request = mousevsc_hid_raw_request, > > }; > > > > -static struct hid_driver mousevsc_hid_driver; > > +static const struct hid_device_id mousevsc_devices[] = { > > + { HID_DEVICE(BUS_VIRTUAL, HID_GROUP_ANY, 0x045E, 0x0621) }, > > + { } > > +}; > > + > > +static struct hid_driver mousevsc_hid_driver = { > > + .name = "hid-hyperv", > > + .id_table = mousevsc_devices, > > + .probe = mousevsc_hid_probe, > > +}; > > > > static int mousevsc_probe(struct hv_device *device, > > const struct hv_vmbus_device_id *dev_id) > > @@ -473,7 +501,6 @@ static int mousevsc_probe(struct hv_device *device, > > } > > > > hid_dev->ll_driver = &mousevsc_ll_driver; > > - hid_dev->driver = &mousevsc_hid_driver; > > hid_dev->bus = BUS_VIRTUAL; > > hid_dev->vendor = input_dev->hid_dev_info.vendor; > > hid_dev->product = input_dev->hid_dev_info.product; > > @@ -488,20 +515,6 @@ static int mousevsc_probe(struct hv_device *device, > > if (ret) > > goto probe_err2; > > > > - > > - ret = hid_parse(hid_dev); > > - if (ret) { > > - hid_err(hid_dev, "parse failed\n"); > > - goto probe_err2; > > - } > > - > > - ret = hid_hw_start(hid_dev, HID_CONNECT_HIDINPUT | HID_CONNECT_HIDDEV); > > - > > - if (ret) { > > - hid_err(hid_dev, "hw start failed\n"); > > - goto probe_err2; > > - } > > - > > device_init_wakeup(&device->device, true); > > > > input_dev->connected = true; > > @@ -579,12 +592,23 @@ static struct hv_driver mousevsc_drv = { > > > > static int __init mousevsc_init(void) > > { > > - return vmbus_driver_register(&mousevsc_drv); > > + int ret; > > + > > + ret = hid_register_driver(&mousevsc_hid_driver); > > + if (ret) > > + return ret; > > + > > + ret = vmbus_driver_register(&mousevsc_drv); > > + if (ret) > > + hid_unregister_driver(&mousevsc_hid_driver); > > + > > + return ret; > > } > > > > static void __exit mousevsc_exit(void) > > { > > vmbus_driver_unregister(&mousevsc_drv); > > + hid_unregister_driver(&mousevsc_hid_driver); > > } > > > > MODULE_LICENSE("GPL"); > > -- > > 2.47.0 > > Reviewed-by: Michael Kelley <mhklinux@outlook.com> Tested V2 as well, please feel free to add, Tested-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Saurabh Singh Sengar <ssengar@linux.microsoft.com> writes: > On Mon, Nov 11, 2024 at 04:50:24PM +0000, Michael Kelley wrote: >> From: Vitaly Kuznetsov <vkuznets@redhat.com> Sent: Monday, November 11, 2024 5:13 AM >> > >> > It was found that unloading 'hid_hyperv' module results in a devres >> > complaint: >> > >> > ... >> > hv_vmbus: unregistering driver hid_hyperv >> > ------------[ cut here ]------------ >> > WARNING: CPU: 2 PID: 3983 at drivers/base/devres.c:691 >> > devres_release_group+0x1f2/0x2c0 >> > ... >> > Call Trace: >> > <TASK> >> > ? devres_release_group+0x1f2/0x2c0 >> > ? __warn+0xd1/0x1c0 >> > ? devres_release_group+0x1f2/0x2c0 >> > ? report_bug+0x32a/0x3c0 >> > ? handle_bug+0x53/0xa0 >> > ? exc_invalid_op+0x18/0x50 >> > ? asm_exc_invalid_op+0x1a/0x20 >> > ? devres_release_group+0x1f2/0x2c0 >> > ? devres_release_group+0x90/0x2c0 >> > ? rcu_is_watching+0x15/0xb0 >> > ? __pfx_devres_release_group+0x10/0x10 >> > hid_device_remove+0xf5/0x220 >> > device_release_driver_internal+0x371/0x540 >> > ? klist_put+0xf3/0x170 >> > bus_remove_device+0x1f1/0x3f0 >> > device_del+0x33f/0x8c0 >> > ? __pfx_device_del+0x10/0x10 >> > ? cleanup_srcu_struct+0x337/0x500 >> > hid_destroy_device+0xc8/0x130 >> > mousevsc_remove+0xd2/0x1d0 [hid_hyperv] >> > device_release_driver_internal+0x371/0x540 >> > driver_detach+0xc5/0x180 >> > bus_remove_driver+0x11e/0x2a0 >> > ? __mutex_unlock_slowpath+0x160/0x5e0 >> > vmbus_driver_unregister+0x62/0x2b0 [hv_vmbus] >> > ... > > Do we want to mention the other error as well this patch is fixing: The error itself is likely the same ('hid_dev->driver' override with 'mousevsc_hid_driver' stub which doesn't do anything) but the trace stack is a bit different, yes. > > [ 68.237679] ------------[ cut here ]------------ > [ 68.237681] WARNING: CPU: 23 PID: 579 at drivers/hid/hid-core.c:1262 hid_open_report+0x2c0/0x350 [hid] > <snip> > [ 68.237741] RIP: 0010:hid_open_report+0x2c0/0x350 [hid] > [ 68.237765] Call Trace: > [ 68.237767] <TASK> > [ 68.237769] ? show_regs+0x6c/0x80 > [ 68.237774] ? __warn+0x8d/0x150 > [ 68.237777] ? hid_open_report+0x2c0/0x350 [hid] > [ 68.237784] ? report_bug+0x182/0x1b0 > [ 68.237788] ? handle_bug+0x6e/0xb0 > [ 68.237791] ? exc_invalid_op+0x18/0x80 > [ 68.237794] ? asm_exc_invalid_op+0x1b/0x20 > [ 68.237799] ? hid_open_report+0x2c0/0x350 [hid] > [ 68.237805] mousevsc_probe+0x1d5/0x250 [hid_hyperv] > [ 68.237808] vmbus_probe+0x3b/0xa0 [hv_vmbus] > [ 68.237822] really_probe+0xee/0x3c0 > [ 68.237827] __driver_probe_device+0x8c/0x180 > [ 68.237830] driver_probe_device+0x24/0xd0 > [ 68.237832] __driver_attach_async_helper+0x6e/0x110 > [ 68.237835] async_run_entry_fn+0x30/0x130 > [ 68.237837] process_one_work+0x178/0x3d0 > [ 68.237839] worker_thread+0x2de/0x410 > [ 68.237841] ? __pfx_worker_thread+0x10/0x10 > [ 68.237843] kthread+0xe1/0x110 > [ 68.237847] ? __pfx_kthread+0x10/0x10 > [ 68.237849] ret_from_fork+0x44/0x70 > [ 68.237852] ? __pfx_kthread+0x10/0x10 > [ 68.237854] ret_from_fork_asm+0x1a/0x30 > [ 68.237858] </TASK> > [ 68.237859] ---[ end trace 0000000000000000 ]--- > [ 68.237861] hid-generic 0006:045E:0621.0002: parse failed > [ 68.238276] hv_vmbus: probe failed for device 58f75a6d-d949-4320-99e1-a2a2576d581c (-19) > > >> > >> > And the issue seems to be that the corresponding devres group is not >> > allocated. Normally, devres_open_group() is called from >> > __hid_device_probe() but Hyper-V HID driver overrides 'hid_dev->driver' >> > with 'mousevsc_hid_driver' stub and basically re-implements >> > __hid_device_probe() by calling hid_parse() and hid_hw_start() but not >> > devres_open_group(). hid_device_probe() does not call __hid_device_probe() >> > for it. Later, when the driver is removed, hid_device_remove() calls >> > devres_release_group() as it doesn't check whether hdev->driver was >> > initially overridden or not. >> > >> > The issue seems to be related to the commit 62c68e7cee33 ("HID: ensure >> > timely release of driver-allocated resources") but the commit itself seems >> > to be correct. >> > >> > Fix the issue by dropping the 'hid_dev->driver' override and using >> > hid_register_driver()/hid_unregister_driver() instead. Alternatively, it >> > would have been possible to rely on the default handling but >> > HID_CONNECT_DEFAULT implies HID_CONNECT_HIDRAW and it doesn't seem to work >> > for mousevsc as-is. >> > >> > Fixes: 62c68e7cee33 ("HID: ensure timely release of driver-allocated resources") >> > Suggested-by: Michael Kelley <mhklinux@outlook.com> >> > Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> >> > --- >> > Changes since v1: >> > - Keep custom HID driver for mousevsc but do it properly >> > [Michael Kelley]. >> > - Add 'Fixes:' tag [Saurabh Singh Sengar]. >> > --- >> > drivers/hid/hid-hyperv.c | 58 ++++++++++++++++++++++++++++------------ >> > 1 file changed, 41 insertions(+), 17 deletions(-) >> > >> > diff --git a/drivers/hid/hid-hyperv.c b/drivers/hid/hid-hyperv.c >> > index f33485d83d24..0fb210e40a41 100644 >> > --- a/drivers/hid/hid-hyperv.c >> > +++ b/drivers/hid/hid-hyperv.c >> > @@ -422,6 +422,25 @@ static int mousevsc_hid_raw_request(struct hid_device *hid, >> > return 0; >> > } >> > >> > +static int mousevsc_hid_probe(struct hid_device *hid_dev, const struct hid_device_id *id) >> > +{ >> > + int ret; >> > + >> > + ret = hid_parse(hid_dev); >> > + if (ret) { >> > + hid_err(hid_dev, "parse failed\n"); >> > + return ret; >> > + } >> > + >> > + ret = hid_hw_start(hid_dev, HID_CONNECT_HIDINPUT | HID_CONNECT_HIDDEV); >> > + if (ret) { >> > + hid_err(hid_dev, "hw start failed\n"); >> > + return ret; >> > + } >> > + >> > + return 0; >> > +} >> > + >> > static const struct hid_ll_driver mousevsc_ll_driver = { >> > .parse = mousevsc_hid_parse, >> > .open = mousevsc_hid_open, >> > @@ -431,7 +450,16 @@ static const struct hid_ll_driver mousevsc_ll_driver = { >> > .raw_request = mousevsc_hid_raw_request, >> > }; >> > >> > -static struct hid_driver mousevsc_hid_driver; >> > +static const struct hid_device_id mousevsc_devices[] = { >> > + { HID_DEVICE(BUS_VIRTUAL, HID_GROUP_ANY, 0x045E, 0x0621) }, >> > + { } >> > +}; >> > + >> > +static struct hid_driver mousevsc_hid_driver = { >> > + .name = "hid-hyperv", >> > + .id_table = mousevsc_devices, >> > + .probe = mousevsc_hid_probe, >> > +}; >> > >> > static int mousevsc_probe(struct hv_device *device, >> > const struct hv_vmbus_device_id *dev_id) >> > @@ -473,7 +501,6 @@ static int mousevsc_probe(struct hv_device *device, >> > } >> > >> > hid_dev->ll_driver = &mousevsc_ll_driver; >> > - hid_dev->driver = &mousevsc_hid_driver; >> > hid_dev->bus = BUS_VIRTUAL; >> > hid_dev->vendor = input_dev->hid_dev_info.vendor; >> > hid_dev->product = input_dev->hid_dev_info.product; >> > @@ -488,20 +515,6 @@ static int mousevsc_probe(struct hv_device *device, >> > if (ret) >> > goto probe_err2; >> > >> > - >> > - ret = hid_parse(hid_dev); >> > - if (ret) { >> > - hid_err(hid_dev, "parse failed\n"); >> > - goto probe_err2; >> > - } >> > - >> > - ret = hid_hw_start(hid_dev, HID_CONNECT_HIDINPUT | HID_CONNECT_HIDDEV); >> > - >> > - if (ret) { >> > - hid_err(hid_dev, "hw start failed\n"); >> > - goto probe_err2; >> > - } >> > - >> > device_init_wakeup(&device->device, true); >> > >> > input_dev->connected = true; >> > @@ -579,12 +592,23 @@ static struct hv_driver mousevsc_drv = { >> > >> > static int __init mousevsc_init(void) >> > { >> > - return vmbus_driver_register(&mousevsc_drv); >> > + int ret; >> > + >> > + ret = hid_register_driver(&mousevsc_hid_driver); >> > + if (ret) >> > + return ret; >> > + >> > + ret = vmbus_driver_register(&mousevsc_drv); >> > + if (ret) >> > + hid_unregister_driver(&mousevsc_hid_driver); >> > + >> > + return ret; >> > } >> > >> > static void __exit mousevsc_exit(void) >> > { >> > vmbus_driver_unregister(&mousevsc_drv); >> > + hid_unregister_driver(&mousevsc_hid_driver); >> > } >> > >> > MODULE_LICENSE("GPL"); >> > -- >> > 2.47.0 >> >> Reviewed-by: Michael Kelley <mhklinux@outlook.com> > > Tested V2 as well, please feel free to add, > Tested-by: Saurabh Sengar <ssengar@linux.microsoft.com> Thank you!
On Tue, 12 Nov 2024, Vitaly Kuznetsov wrote: > >> Reviewed-by: Michael Kelley <mhklinux@outlook.com> > > > > Tested V2 as well, please feel free to add, > > Tested-by: Saurabh Sengar <ssengar@linux.microsoft.com> > > Thank you! Applied to hid.git, thanks!
diff --git a/drivers/hid/hid-hyperv.c b/drivers/hid/hid-hyperv.c index f33485d83d24..0fb210e40a41 100644 --- a/drivers/hid/hid-hyperv.c +++ b/drivers/hid/hid-hyperv.c @@ -422,6 +422,25 @@ static int mousevsc_hid_raw_request(struct hid_device *hid, return 0; } +static int mousevsc_hid_probe(struct hid_device *hid_dev, const struct hid_device_id *id) +{ + int ret; + + ret = hid_parse(hid_dev); + if (ret) { + hid_err(hid_dev, "parse failed\n"); + return ret; + } + + ret = hid_hw_start(hid_dev, HID_CONNECT_HIDINPUT | HID_CONNECT_HIDDEV); + if (ret) { + hid_err(hid_dev, "hw start failed\n"); + return ret; + } + + return 0; +} + static const struct hid_ll_driver mousevsc_ll_driver = { .parse = mousevsc_hid_parse, .open = mousevsc_hid_open, @@ -431,7 +450,16 @@ static const struct hid_ll_driver mousevsc_ll_driver = { .raw_request = mousevsc_hid_raw_request, }; -static struct hid_driver mousevsc_hid_driver; +static const struct hid_device_id mousevsc_devices[] = { + { HID_DEVICE(BUS_VIRTUAL, HID_GROUP_ANY, 0x045E, 0x0621) }, + { } +}; + +static struct hid_driver mousevsc_hid_driver = { + .name = "hid-hyperv", + .id_table = mousevsc_devices, + .probe = mousevsc_hid_probe, +}; static int mousevsc_probe(struct hv_device *device, const struct hv_vmbus_device_id *dev_id) @@ -473,7 +501,6 @@ static int mousevsc_probe(struct hv_device *device, } hid_dev->ll_driver = &mousevsc_ll_driver; - hid_dev->driver = &mousevsc_hid_driver; hid_dev->bus = BUS_VIRTUAL; hid_dev->vendor = input_dev->hid_dev_info.vendor; hid_dev->product = input_dev->hid_dev_info.product; @@ -488,20 +515,6 @@ static int mousevsc_probe(struct hv_device *device, if (ret) goto probe_err2; - - ret = hid_parse(hid_dev); - if (ret) { - hid_err(hid_dev, "parse failed\n"); - goto probe_err2; - } - - ret = hid_hw_start(hid_dev, HID_CONNECT_HIDINPUT | HID_CONNECT_HIDDEV); - - if (ret) { - hid_err(hid_dev, "hw start failed\n"); - goto probe_err2; - } - device_init_wakeup(&device->device, true); input_dev->connected = true; @@ -579,12 +592,23 @@ static struct hv_driver mousevsc_drv = { static int __init mousevsc_init(void) { - return vmbus_driver_register(&mousevsc_drv); + int ret; + + ret = hid_register_driver(&mousevsc_hid_driver); + if (ret) + return ret; + + ret = vmbus_driver_register(&mousevsc_drv); + if (ret) + hid_unregister_driver(&mousevsc_hid_driver); + + return ret; } static void __exit mousevsc_exit(void) { vmbus_driver_unregister(&mousevsc_drv); + hid_unregister_driver(&mousevsc_hid_driver); } MODULE_LICENSE("GPL");
It was found that unloading 'hid_hyperv' module results in a devres complaint: ... hv_vmbus: unregistering driver hid_hyperv ------------[ cut here ]------------ WARNING: CPU: 2 PID: 3983 at drivers/base/devres.c:691 devres_release_group+0x1f2/0x2c0 ... Call Trace: <TASK> ? devres_release_group+0x1f2/0x2c0 ? __warn+0xd1/0x1c0 ? devres_release_group+0x1f2/0x2c0 ? report_bug+0x32a/0x3c0 ? handle_bug+0x53/0xa0 ? exc_invalid_op+0x18/0x50 ? asm_exc_invalid_op+0x1a/0x20 ? devres_release_group+0x1f2/0x2c0 ? devres_release_group+0x90/0x2c0 ? rcu_is_watching+0x15/0xb0 ? __pfx_devres_release_group+0x10/0x10 hid_device_remove+0xf5/0x220 device_release_driver_internal+0x371/0x540 ? klist_put+0xf3/0x170 bus_remove_device+0x1f1/0x3f0 device_del+0x33f/0x8c0 ? __pfx_device_del+0x10/0x10 ? cleanup_srcu_struct+0x337/0x500 hid_destroy_device+0xc8/0x130 mousevsc_remove+0xd2/0x1d0 [hid_hyperv] device_release_driver_internal+0x371/0x540 driver_detach+0xc5/0x180 bus_remove_driver+0x11e/0x2a0 ? __mutex_unlock_slowpath+0x160/0x5e0 vmbus_driver_unregister+0x62/0x2b0 [hv_vmbus] ... And the issue seems to be that the corresponding devres group is not allocated. Normally, devres_open_group() is called from __hid_device_probe() but Hyper-V HID driver overrides 'hid_dev->driver' with 'mousevsc_hid_driver' stub and basically re-implements __hid_device_probe() by calling hid_parse() and hid_hw_start() but not devres_open_group(). hid_device_probe() does not call __hid_device_probe() for it. Later, when the driver is removed, hid_device_remove() calls devres_release_group() as it doesn't check whether hdev->driver was initially overridden or not. The issue seems to be related to the commit 62c68e7cee33 ("HID: ensure timely release of driver-allocated resources") but the commit itself seems to be correct. Fix the issue by dropping the 'hid_dev->driver' override and using hid_register_driver()/hid_unregister_driver() instead. Alternatively, it would have been possible to rely on the default handling but HID_CONNECT_DEFAULT implies HID_CONNECT_HIDRAW and it doesn't seem to work for mousevsc as-is. Fixes: 62c68e7cee33 ("HID: ensure timely release of driver-allocated resources") Suggested-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> --- Changes since v1: - Keep custom HID driver for mousevsc but do it properly [Michael Kelley]. - Add 'Fixes:' tag [Saurabh Singh Sengar]. --- drivers/hid/hid-hyperv.c | 58 ++++++++++++++++++++++++++++------------ 1 file changed, 41 insertions(+), 17 deletions(-)