@@ -481,6 +481,18 @@ config TOUCHSCREEN_HYNITRON_CSTXXX
To compile this driver as a module, choose M here: the
module will be called hynitron-cstxxx.
+config TOUCHSCREEN_HYNITRON_CST816X
+ tristate "Hynitron CST816X touchscreen support"
+ depends on I2C
+ help
+ Say Y here if you have a touchscreen using a Hynitron
+ CST816X touchscreen controller.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called hynitron-cst816x.
+
config TOUCHSCREEN_ILI210X
tristate "Ilitek ILI210X based touchscreen"
depends on I2C
@@ -51,6 +51,7 @@ obj-$(CONFIG_TOUCHSCREEN_GOODIX_BERLIN_CORE) += goodix_berlin_core.o
obj-$(CONFIG_TOUCHSCREEN_GOODIX_BERLIN_I2C) += goodix_berlin_i2c.o
obj-$(CONFIG_TOUCHSCREEN_GOODIX_BERLIN_SPI) += goodix_berlin_spi.o
obj-$(CONFIG_TOUCHSCREEN_HIDEEP) += hideep.o
+obj-$(CONFIG_TOUCHSCREEN_HYNITRON_CST816X) += hynitron-cst816x.o
obj-$(CONFIG_TOUCHSCREEN_HYNITRON_CSTXXX) += hynitron_cstxxx.o
obj-$(CONFIG_TOUCHSCREEN_ILI210X) += ili210x.o
obj-$(CONFIG_TOUCHSCREEN_ILITEK) += ilitek_ts_i2c.o
new file mode 100644
@@ -0,0 +1,227 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Driver for I2C connected Hynitron CST816X Touchscreen
+ *
+ * Copyright (C) 2024 Oleh Kuzhylnyi <kuzhylol@gmail.com>
+ */
+#include <asm/unaligned.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+
+#define CST816X_FRAME 0x01
+
+struct cst816x_touch_info {
+ u8 gesture;
+ u8 touch;
+ __be16 abs_x;
+ __be16 abs_y;
+} __packed;
+
+struct cst816x_event_map {
+ u8 gesture;
+ u16 code;
+};
+
+struct cst816x_priv {
+ struct i2c_client *client;
+ struct gpio_desc *reset;
+ struct input_dev *input;
+ struct cst816x_event_map event_map[16];
+};
+
+static int cst816x_parse_dt_event_map(struct device *dev,
+ struct cst816x_priv *priv)
+{
+ struct device_node *np = dev->of_node;
+ struct device_node *gst, *child;
+ u32 gesture, code;
+ u8 index;
+
+ gst = of_get_child_by_name(np, "gestures");
+ if (!gst)
+ return -ENOENT;
+
+ for_each_child_of_node(gst, child) {
+ if (of_property_read_u32(child, "cst816x,gesture", &gesture))
+ continue;
+
+ if (of_property_read_u32(child, "linux,code", &code))
+ continue;
+
+ index = gesture & 0x0F;
+
+ priv->event_map[index].gesture = gesture;
+ priv->event_map[index].code = code;
+ }
+
+ return 0;
+}
+
+static int cst816x_i2c_read_register(struct cst816x_priv *priv, u8 reg,
+ void *buf, size_t len)
+{
+ int rc;
+ struct i2c_msg xfer[] = {
+ {
+ .addr = priv->client->addr,
+ .flags = 0,
+ .buf = ®,
+ .len = sizeof(reg),
+ },
+ {
+ .addr = priv->client->addr,
+ .flags = I2C_M_RD,
+ .buf = buf,
+ .len = len,
+ },
+ };
+
+ rc = i2c_transfer(priv->client->adapter, xfer, ARRAY_SIZE(xfer));
+ if (rc != ARRAY_SIZE(xfer)) {
+ rc = rc < 0 ? rc : -EIO;
+ dev_err(&priv->client->dev, "i2c rx err: %d\n", rc);
+ return rc;
+ }
+
+ return 0;
+}
+
+static bool cst816x_process_touch(struct cst816x_priv *priv,
+ struct cst816x_touch_info *info)
+{
+ if (cst816x_i2c_read_register(priv, CST816X_FRAME, info, sizeof(*info)))
+ return false;
+
+ info->abs_x = get_unaligned_be16(&info->abs_x) & GENMASK(11, 0);
+ info->abs_y = get_unaligned_be16(&info->abs_y) & GENMASK(11, 0);
+
+ dev_dbg(&priv->client->dev, "x: %d, y: %d, t: %d, g: 0x%x\n",
+ info->abs_x, info->abs_y, info->touch, info->gesture);
+
+ return true;
+}
+
+static int cst816x_register_input(struct cst816x_priv *priv)
+{
+ priv->input = devm_input_allocate_device(&priv->client->dev);
+ if (!priv->input)
+ return -ENOMEM;
+
+ priv->input->name = "Hynitron CST816X Touchscreen";
+ priv->input->phys = "input/ts";
+ priv->input->id.bustype = BUS_I2C;
+ input_set_drvdata(priv->input, priv);
+
+ for (int i = 0; i < ARRAY_SIZE(priv->event_map); i++)
+ input_set_capability(priv->input, EV_KEY,
+ priv->event_map[i].code);
+
+ input_set_abs_params(priv->input, ABS_X, 0, 240, 0, 0);
+ input_set_abs_params(priv->input, ABS_Y, 0, 240, 0, 0);
+
+ return input_register_device(priv->input);
+}
+
+static void cst816x_reset(struct cst816x_priv *priv)
+{
+ gpiod_set_value_cansleep(priv->reset, 1);
+ msleep(50);
+ gpiod_set_value_cansleep(priv->reset, 0);
+ msleep(100);
+}
+
+static irqreturn_t cst816x_irq_cb(int irq, void *cookie)
+{
+ struct cst816x_priv *priv = cookie;
+ struct cst816x_touch_info info;
+
+ if (!cst816x_process_touch(priv, &info))
+ return IRQ_HANDLED;
+
+ if (info.touch) {
+ input_report_abs(priv->input, ABS_X, info.abs_x);
+ input_report_abs(priv->input, ABS_Y, info.abs_y);
+ input_report_key(priv->input, BTN_TOUCH, 1);
+ }
+
+ if (info.gesture) {
+ input_report_key(priv->input,
+ priv->event_map[info.gesture & 0x0F].code,
+ info.touch);
+
+ if (!info.touch)
+ input_report_key(priv->input, BTN_TOUCH, 0);
+ }
+
+ input_sync(priv->input);
+
+ return IRQ_HANDLED;
+}
+
+static int cst816x_probe(struct i2c_client *client)
+{
+ struct cst816x_priv *priv;
+ struct device *dev = &client->dev;
+ int error;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->client = client;
+
+ priv->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
+ if (IS_ERR(priv->reset))
+ return dev_err_probe(dev, PTR_ERR(priv->reset),
+ "gpio reset request failed\n");
+
+ if (priv->reset)
+ cst816x_reset(priv);
+
+ error = cst816x_parse_dt_event_map(dev, priv);
+ if (error)
+ dev_warn(dev, "no gestures specified in dt\n");
+
+ error = cst816x_register_input(priv);
+ if (error)
+ return dev_err_probe(dev, error, "input register failed\n");
+
+ error = devm_request_threaded_irq(dev, client->irq, NULL, cst816x_irq_cb,
+ IRQF_ONESHOT, dev->driver->name, priv);
+ if (error)
+ return dev_err_probe(dev, error, "irq request failed\n");
+
+ return 0;
+}
+
+static const struct i2c_device_id cst816x_id[] = {
+ { .name = "cst816s", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, cst816x_id);
+
+static const struct of_device_id cst816x_of_match[] = {
+ { .compatible = "hynitron,cst816s", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, cst816x_of_match);
+
+static struct i2c_driver cst816x_driver = {
+ .driver = {
+ .name = "cst816x",
+ .of_match_table = cst816x_of_match,
+ },
+ .id_table = cst816x_id,
+ .probe = cst816x_probe,
+};
+
+module_i2c_driver(cst816x_driver);
+
+MODULE_AUTHOR("Oleh Kuzhylnyi <kuzhylol@gmail.com>");
+MODULE_DESCRIPTION("Hynitron CST816X Touchscreen Driver");
+MODULE_LICENSE("GPL");
Introduce support for the Hynitron CST816X touchscreen controller used for 240×240 1.28-inch Round LCD Display Module manufactured by Waveshare Electronics. The driver is designed based on an Arduino implementation marked as under MIT License. This driver is written for a particular round display based on the CST816S controller, which is not compatiable with existing driver for Hynitron controllers. Signed-off-by: Oleh Kuzhylnyi <kuzhylol@gmail.com> --- Changes in v7: - Update commit based on Jeffs's feedback: - Move event_map table to Device Tree - Implement DT parsing functionality - Use "int" type for iterators - Get rid of "*dev" entry from private struct - Use touch_info directly as a buffer for I2C - Fix coding style tweaks Changes in v6: - No code changes Changes in v5: - Update commit based on Dmitry's feedback: - Make GPIO reset optional - Combine declaration and initialization for i2c_xfer - Return 0 explicitly where possible - Rename rc (return code) to error - Make Touch processing call return boolean - Improve error handling for i2c_transfer - Use get_unaligned_be16 for getting coordinates - Move touch event completeness upper to irq callback Changes in v4: - Update commit based on Dmitry's feedback: - Move abs_x and abs_y to u16 - Remove __packed qualifier for touch_info struct - Hide tiny touch irq context to stack - Extend cst816x_i2c_read_register() with buf and buf_size - Remove loop from event lookup Changes in v3: - Drop timer and delayed work - Process touch in threaded IRQ context - Fix chip reset sequence - Move input_register() before devm_request_threaded_irq() - Re-arrange and document input reporting - Set u16 data type for event_code - Remove double tap event to prevent continuous double side sliding Changes in v2: - Apply dev_err_probe() for better error handling - Remove redundant printing, remove dev_warn() message spamming - Get rid of PM since the touchscreen goes into sleep mode automatically - Get rid of IRQ control and IRQF_NO_AUTOEN flag - Reduce timer timeout up to 10ms to handle touch events faster - Skip registering of non-gesture CST816X_SWIPE event - Shift input_register_device() as a final call in probe() callback - Specify name of i2c_device_id explicitly - Update module description and fix typo - Add necessary spaces between lines drivers/input/touchscreen/Kconfig | 12 + drivers/input/touchscreen/Makefile | 1 + drivers/input/touchscreen/hynitron-cst816x.c | 227 +++++++++++++++++++ 3 files changed, 240 insertions(+) create mode 100644 drivers/input/touchscreen/hynitron-cst816x.c