| Message ID | 49de73b5-698f-4865-ab63-100e28dfc4a1@gmail.com |
|---|---|
| State | New |
| Headers | show |
| Series | [v2] wifi: rtw88: Fix USB/SDIO devices not transmitting beacons | expand |
Hi Bitterblue, Bitterblue Smith <rtl8821cerfe2@gmail.com> wrote: > > All USB devices supported by rtw88 have the same problem: they don't > transmit beacons in AP mode. (Some?) SDIO devices are also affected. > The cause appears to be clearing BIT_EN_BCNQ_DL of REG_FWHW_TXQ_CTRL > before uploading the beacon reserved page, so don't clear the bit for > USB and SDIO devices. > > Tested with RTL8811CU and RTL8723DU. > > Cc: <stable@vger.kernel.org> # 6.6.x > Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Can I say two below patchset are equivalent in your side? [Patchset 1: your v1] 13744097 New [1/2] wifi: rtw88: Fix USB devices not transmitting beacons 13744098 New [2/2] wifi: rtw88: Avoid using macid 0 in AP mode [Patchset 2: your v2 + mine] 13771597 New [v2] wifi: rtw88: Fix USB/SDIO devices not transmitting beacons 13767746 New wifi: rtw88: assign mac_id for vif/sta and update to TX desc If this can make AP mode on USB devices step forward, I will merge them ahead.
On 30/08/2024 03:30, Ping-Ke Shih wrote: > Hi Bitterblue, > > Bitterblue Smith <rtl8821cerfe2@gmail.com> wrote: >> >> All USB devices supported by rtw88 have the same problem: they don't >> transmit beacons in AP mode. (Some?) SDIO devices are also affected. >> The cause appears to be clearing BIT_EN_BCNQ_DL of REG_FWHW_TXQ_CTRL >> before uploading the beacon reserved page, so don't clear the bit for >> USB and SDIO devices. >> >> Tested with RTL8811CU and RTL8723DU. >> >> Cc: <stable@vger.kernel.org> # 6.6.x >> Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> > > Can I say two below patchset are equivalent in your side? > > [Patchset 1: your v1] > 13744097 New [1/2] wifi: rtw88: Fix USB devices not transmitting beacons > 13744098 New [2/2] wifi: rtw88: Avoid using macid 0 in AP mode > > [Patchset 2: your v2 + mine] > 13771597 New [v2] wifi: rtw88: Fix USB/SDIO devices not transmitting beacons > 13767746 New wifi: rtw88: assign mac_id for vif/sta and update to TX desc > > If this can make AP mode on USB devices step forward, I will merge them ahead. > Yes, patchset 2 works for me.
Bitterblue Smith <rtl8821cerfe2@gmail.com> wrote: > All USB devices supported by rtw88 have the same problem: they don't > transmit beacons in AP mode. (Some?) SDIO devices are also affected. > The cause appears to be clearing BIT_EN_BCNQ_DL of REG_FWHW_TXQ_CTRL > before uploading the beacon reserved page, so don't clear the bit for > USB and SDIO devices. > > Tested with RTL8811CU and RTL8723DU. > > Cc: <stable@vger.kernel.org> # 6.6.x > Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> 1 patch(es) applied to rtw-next branch of rtw.git, thanks. faa2e484b393 wifi: rtw88: Fix USB/SDIO devices not transmitting beacons --- https://github.com/pkshih/rtw.git
diff --git a/drivers/net/wireless/realtek/rtw88/fw.c b/drivers/net/wireless/realtek/rtw88/fw.c index ab7d414d0ba6..b9b0114e253b 100644 --- a/drivers/net/wireless/realtek/rtw88/fw.c +++ b/drivers/net/wireless/realtek/rtw88/fw.c @@ -1468,10 +1468,12 @@ int rtw_fw_write_data_rsvd_page(struct rtw_dev *rtwdev, u16 pg_addr, val |= BIT_ENSWBCN >> 8; rtw_write8(rtwdev, REG_CR + 1, val); - val = rtw_read8(rtwdev, REG_FWHW_TXQ_CTRL + 2); - bckp[1] = val; - val &= ~(BIT_EN_BCNQ_DL >> 16); - rtw_write8(rtwdev, REG_FWHW_TXQ_CTRL + 2, val); + if (rtw_hci_type(rtwdev) == RTW_HCI_TYPE_PCIE) { + val = rtw_read8(rtwdev, REG_FWHW_TXQ_CTRL + 2); + bckp[1] = val; + val &= ~(BIT_EN_BCNQ_DL >> 16); + rtw_write8(rtwdev, REG_FWHW_TXQ_CTRL + 2, val); + } ret = rtw_hci_write_data_rsvd_page(rtwdev, buf, size); if (ret) { @@ -1496,7 +1498,8 @@ int rtw_fw_write_data_rsvd_page(struct rtw_dev *rtwdev, u16 pg_addr, rsvd_pg_head = rtwdev->fifo.rsvd_boundary; rtw_write16(rtwdev, REG_FIFOPAGE_CTRL_2, rsvd_pg_head | BIT_BCN_VALID_V1); - rtw_write8(rtwdev, REG_FWHW_TXQ_CTRL + 2, bckp[1]); + if (rtw_hci_type(rtwdev) == RTW_HCI_TYPE_PCIE) + rtw_write8(rtwdev, REG_FWHW_TXQ_CTRL + 2, bckp[1]); rtw_write8(rtwdev, REG_CR + 1, bckp[0]); return ret;
All USB devices supported by rtw88 have the same problem: they don't transmit beacons in AP mode. (Some?) SDIO devices are also affected. The cause appears to be clearing BIT_EN_BCNQ_DL of REG_FWHW_TXQ_CTRL before uploading the beacon reserved page, so don't clear the bit for USB and SDIO devices. Tested with RTL8811CU and RTL8723DU. Cc: <stable@vger.kernel.org> # 6.6.x Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> --- v2: - Only clear BIT_EN_BCNQ_DL for PCIE devices: https://lore.kernel.org/linux-wireless/CAP8xZ6n8utvFJCmTwnRzFccRkZZzk+R5Bf69UArbbzd4Ev9aRQ@mail.gmail.com/ - Update the commit message. --- drivers/net/wireless/realtek/rtw88/fw.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-)