diff mbox series

[v5,1/1] dt-bindings: input: touchscreen: convert ads7846.txt to yaml

Message ID 20240820163710.448302-1-Frank.Li@nxp.com
State Superseded
Headers show
Series [v5,1/1] dt-bindings: input: touchscreen: convert ads7846.txt to yaml | expand

Commit Message

Frank Li Aug. 20, 2024, 4:37 p.m. UTC
Convert binding doc ads7846.txt to yaml format.
Additional change:
- add ref to touchscreen.yaml and spi-peripheral-props.yaml.
- use common node name touchscreen.
- sort ti properties alphabetically.
- sort common properties alphabetically.
- sort compatible string alphabetically.
- remove vcc-supply from required list.
- deprecated ti,x-min, ti,y,min

Fix below warning: arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dtb: touchscreen@0:
	ti,x-min: b'\x00}' is not of type 'object', 'array', 'boolean', 'null'

Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
Change from v4 to v5
- Add Reviewed-by: Marek Vasut <marex@denx.de>
- Start sentence with uppercase letter

Change from v3 to v4
- new line for all descrptions
- add . after sentense.

Change from v2 to v3
- Remove u16(u32) in descriptions
- deprecated ti,x-min and ti, y-min

Change from v1 to v2
- sort properties, by 3 group:
  1. General (compatible, reg, interrupt)
  2. Common properties
  3. ti properties
- sort maintainers name alphabetically.
- uint16 have to be kept because default is uint32
- remove vcc-supply from required list
- remove unfinished sentence "all mandatory properties described in"
because it refer to /schemas/spi/spi-peripheral-props.yaml#
- fix make refcheckdoc error
---
 .../bindings/input/touchscreen/ads7846.txt    | 107 ----------
 .../input/touchscreen/ti,ads7843.yaml         | 182 ++++++++++++++++++
 .../bindings/power/wakeup-source.txt          |   2 +-
 3 files changed, 183 insertions(+), 108 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/ads7846.txt
 create mode 100644 Documentation/devicetree/bindings/input/touchscreen/ti,ads7843.yaml

Comments

Rob Herring (Arm) Aug. 26, 2024, 1:57 p.m. UTC | #1
On Tue, Aug 20, 2024 at 12:37:03PM -0400, Frank Li wrote:
> Convert binding doc ads7846.txt to yaml format.
> Additional change:
> - add ref to touchscreen.yaml and spi-peripheral-props.yaml.
> - use common node name touchscreen.
> - sort ti properties alphabetically.
> - sort common properties alphabetically.
> - sort compatible string alphabetically.
> - remove vcc-supply from required list.
> - deprecated ti,x-min, ti,y,min

ti,y-min?

> 
> Fix below warning: arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dtb: touchscreen@0:
> 	ti,x-min: b'\x00}' is not of type 'object', 'array', 'boolean', 'null'
> 
> Reviewed-by: Marek Vasut <marex@denx.de>
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
> Change from v4 to v5
> - Add Reviewed-by: Marek Vasut <marex@denx.de>
> - Start sentence with uppercase letter
> 
> Change from v3 to v4
> - new line for all descrptions
> - add . after sentense.
> 
> Change from v2 to v3
> - Remove u16(u32) in descriptions
> - deprecated ti,x-min and ti, y-min
> 
> Change from v1 to v2
> - sort properties, by 3 group:
>   1. General (compatible, reg, interrupt)
>   2. Common properties
>   3. ti properties
> - sort maintainers name alphabetically.
> - uint16 have to be kept because default is uint32
> - remove vcc-supply from required list
> - remove unfinished sentence "all mandatory properties described in"
> because it refer to /schemas/spi/spi-peripheral-props.yaml#
> - fix make refcheckdoc error
> ---
>  .../bindings/input/touchscreen/ads7846.txt    | 107 ----------
>  .../input/touchscreen/ti,ads7843.yaml         | 182 ++++++++++++++++++
>  .../bindings/power/wakeup-source.txt          |   2 +-
>  3 files changed, 183 insertions(+), 108 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/ads7846.txt
>  create mode 100644 Documentation/devicetree/bindings/input/touchscreen/ti,ads7843.yaml


> diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti,ads7843.yaml b/Documentation/devicetree/bindings/input/touchscreen/ti,ads7843.yaml
> new file mode 100644
> index 0000000000000..92d5e7d3b1ffd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/touchscreen/ti,ads7843.yaml
> @@ -0,0 +1,182 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/input/touchscreen/ti,ads7843.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: TI's SPI driven touch screen controllers.

Drop period.

> +
> +maintainers:
> +  - Alexander Stein <alexander.stein@ew.tq-group.com>
> +  - Dmitry Torokhov <dmitry.torokhov@gmail.com>
> +  - Marek Vasut <marex@denx.de>
> +
> +description:
> +  Device tree bindings for TI's ADS7843, ADS7845, ADS7846, ADS7873, TSC2046

Drop 'Device tree bindings for '.

> +  SPI driven touch screen controllers.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - ti,ads7843
> +      - ti,ads7845
> +      - ti,ads7846
> +      - ti,ads7873
> +      - ti,tsc2046
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  pendown-gpio:
> +    description:
> +      GPIO handle describing the pin the !PENIRQ line is connected to.

maxItems: 1

> +
> +  vcc-supply:
> +    description:
> +      A regulator node for the supply voltage.
> +
> +  wakeup-source: true
> +
> +  ti,debounce-max:
> +    deprecated: true
> +    $ref: /schemas/types.yaml#/definitions/uint16
> +    description:
> +      Max number of additional readings per sample.
> +
> +  ti,debounce-rep:
> +    $ref: /schemas/types.yaml#/definitions/uint16
> +    description:
> +      Additional consecutive good readings required after the first two.
> +
> +  ti,debounce-tol:
> +    $ref: /schemas/types.yaml#/definitions/uint16
> +    description:
> +      Tolerance used for filtering.
> +
> +  ti,hsync-gpios:
> +    description:
> +      GPIO line to poll for hsync.

maxItems: 1

With those fixes,

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/input/touchscreen/ads7846.txt b/Documentation/devicetree/bindings/input/touchscreen/ads7846.txt
deleted file mode 100644
index 399c87782935c..0000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/ads7846.txt
+++ /dev/null
@@ -1,107 +0,0 @@ 
-Device tree bindings for TI's ADS7843, ADS7845, ADS7846, ADS7873, TSC2046
-SPI driven touch screen controllers.
-
-The node for this driver must be a child node of a SPI controller, hence
-all mandatory properties described in
-
-	Documentation/devicetree/bindings/spi/spi-bus.txt
-
-must be specified.
-
-Additional required properties:
-
-	compatible		Must be one of the following, depending on the
-				model:
-					"ti,tsc2046"
-					"ti,ads7843"
-					"ti,ads7845"
-					"ti,ads7846"
-					"ti,ads7873"
-
-	interrupts		An interrupt node describing the IRQ line the chip's
-				!PENIRQ pin is connected to.
-	vcc-supply		A regulator node for the supply voltage.
-
-
-Optional properties:
-
-	ti,vref-delay-usecs		vref supply delay in usecs, 0 for
-					external vref (u16).
-	ti,vref-mv			The VREF voltage, in millivolts (u16).
-					Set to 0 to use internal references
-					(ADS7846).
-	ti,keep-vref-on			set to keep vref on for differential
-					measurements as well
-	ti,settle-delay-usec		Settling time of the analog signals;
-					a function of Vcc and the capacitance
-					on the X/Y drivers.  If set to non-zero,
-					two samples are taken with settle_delay
-					us apart, and the second one is used.
-					~150 uSec with 0.01uF caps (u16).
-	ti,penirq-recheck-delay-usecs	If set to non-zero, after samples are
-					taken this delay is applied and penirq
-					is rechecked, to help avoid false
-					events.  This value is affected by the
-					material used to build the touch layer
-					(u16).
-	ti,x-plate-ohms			Resistance of the X-plate,
-					in Ohms (u16).
-	ti,y-plate-ohms			Resistance of the Y-plate,
-					in Ohms (u16).
-	ti,x-min			Minimum value on the X axis (u16).
-	ti,y-min			Minimum value on the Y axis (u16).
-	ti,debounce-tol			Tolerance used for filtering (u16).
-	ti,debounce-rep			Additional consecutive good readings
-					required after the first two (u16).
-	ti,pendown-gpio-debounce	Platform specific debounce time for the
-					pendown-gpio (u32).
-	pendown-gpio			GPIO handle describing the pin the !PENIRQ
-					line is connected to.
-	ti,hsync-gpios			GPIO line to poll for hsync
-	wakeup-source			use any event on touchscreen as wakeup event.
-					(Legacy property support: "linux,wakeup")
-	touchscreen-size-x		General touchscreen binding, see [1].
-	touchscreen-size-y		General touchscreen binding, see [1].
-	touchscreen-max-pressure	General touchscreen binding, see [1].
-	touchscreen-min-pressure	General touchscreen binding, see [1].
-	touchscreen-average-samples	General touchscreen binding, see [1].
-	touchscreen-inverted-x		General touchscreen binding, see [1].
-	touchscreen-inverted-y		General touchscreen binding, see [1].
-	touchscreen-swapped-x-y		General touchscreen binding, see [1].
-
-[1] All general touchscreen properties are described in
-    Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt.
-
-Deprecated properties:
-
-	ti,swap-xy			swap x and y axis
-	ti,x-max			Maximum value on the X axis (u16).
-	ti,y-max			Maximum value on the Y axis (u16).
-	ti,pressure-min			Minimum reported pressure value
-					(threshold) - u16.
-	ti,pressure-max			Maximum reported pressure value (u16).
-	ti,debounce-max			Max number of additional readings per
-					sample (u16).
-
-Example for a TSC2046 chip connected to an McSPI controller of an OMAP SoC::
-
-	spi_controller {
-		tsc2046@0 {
-			reg = <0>;	/* CS0 */
-			compatible = "ti,tsc2046";
-			interrupt-parent = <&gpio1>;
-			interrupts = <8 0>;	/* BOOT6 / GPIO 8 */
-			spi-max-frequency = <1000000>;
-			pendown-gpio = <&gpio1 8 0>;
-			vcc-supply = <&reg_vcc3>;
-
-			ti,x-min = /bits/ 16 <0>;
-			ti,x-max = /bits/ 16 <8000>;
-			ti,y-min = /bits/ 16 <0>;
-			ti,y-max = /bits/ 16 <4800>;
-			ti,x-plate-ohms = /bits/ 16 <40>;
-			ti,pressure-max = /bits/ 16 <255>;
-
-			wakeup-source;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti,ads7843.yaml b/Documentation/devicetree/bindings/input/touchscreen/ti,ads7843.yaml
new file mode 100644
index 0000000000000..92d5e7d3b1ffd
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/ti,ads7843.yaml
@@ -0,0 +1,182 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/ti,ads7843.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI's SPI driven touch screen controllers.
+
+maintainers:
+  - Alexander Stein <alexander.stein@ew.tq-group.com>
+  - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+  - Marek Vasut <marex@denx.de>
+
+description:
+  Device tree bindings for TI's ADS7843, ADS7845, ADS7846, ADS7873, TSC2046
+  SPI driven touch screen controllers.
+
+properties:
+  compatible:
+    enum:
+      - ti,ads7843
+      - ti,ads7845
+      - ti,ads7846
+      - ti,ads7873
+      - ti,tsc2046
+
+  interrupts:
+    maxItems: 1
+
+  pendown-gpio:
+    description:
+      GPIO handle describing the pin the !PENIRQ line is connected to.
+
+  vcc-supply:
+    description:
+      A regulator node for the supply voltage.
+
+  wakeup-source: true
+
+  ti,debounce-max:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint16
+    description:
+      Max number of additional readings per sample.
+
+  ti,debounce-rep:
+    $ref: /schemas/types.yaml#/definitions/uint16
+    description:
+      Additional consecutive good readings required after the first two.
+
+  ti,debounce-tol:
+    $ref: /schemas/types.yaml#/definitions/uint16
+    description:
+      Tolerance used for filtering.
+
+  ti,hsync-gpios:
+    description:
+      GPIO line to poll for hsync.
+
+  ti,keep-vref-on:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Set to keep Vref on for differential measurements as well.
+
+  ti,pendown-gpio-debounce:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Platform specific debounce time for the pendown-gpio.
+
+  ti,penirq-recheck-delay-usecs:
+    $ref: /schemas/types.yaml#/definitions/uint16
+    description:
+      If set to non-zero, after samples are taken this delay is applied and
+      penirq is rechecked, to help avoid false events.  This value is
+      affected by the material used to build the touch layer.
+
+  ti,pressure-max:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint16
+    description:
+      Maximum reported pressure value.
+
+  ti,pressure-min:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint16
+    description:
+      Minimum reported pressure value (threshold).
+
+  ti,settle-delay-usec:
+    $ref: /schemas/types.yaml#/definitions/uint16
+    description:
+      Settling time of the analog signals; a function of Vcc and the
+      capacitance on the X/Y drivers.  If set to non-zero, two samples are
+      taken with settle_delay us apart, and the second one is used. ~150
+      uSec with 0.01uF caps.
+
+  ti,swap-xy:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Swap x and y axis.
+
+  ti,vref-delay-usecs:
+    $ref: /schemas/types.yaml#/definitions/uint16
+    description:
+      Vref supply delay in usecs, 0 for external Vref.
+
+  ti,vref-mv:
+    $ref: /schemas/types.yaml#/definitions/uint16
+    description:
+      The VREF voltage, in millivolts.
+      Set to 0 to use internal references (ADS7846).
+
+  ti,x-plate-ohms:
+    $ref: /schemas/types.yaml#/definitions/uint16
+    description:
+      Resistance of the X-plate, in Ohms.
+
+  ti,x-max:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint16
+    description:
+      Maximum value on the X axis.
+
+  ti,x-min:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint16
+    description:
+      Minimum value on the X axis.
+
+  ti,y-plate-ohms:
+    $ref: /schemas/types.yaml#/definitions/uint16
+    description:
+      Resistance of the Y-plate, in Ohms.
+
+  ti,y-max:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint16
+    description:
+      Maximum value on the Y axis.
+
+  ti,y-min:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint16
+    description:
+      Minimum value on the Y axis.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: touchscreen.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi{
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchscreen@0 {
+           compatible = "ti,tsc2046";
+           reg = <0>;	/* CS0 */
+           interrupt-parent = <&gpio1>;
+           interrupts = <8 0>;	/* BOOT6 / GPIO 8 */
+           pendown-gpio = <&gpio1 8 0>;
+           spi-max-frequency = <1000000>;
+           vcc-supply = <&reg_vcc3>;
+           wakeup-source;
+
+           ti,pressure-max = /bits/ 16 <255>;
+           ti,x-max = /bits/ 16 <8000>;
+           ti,x-min = /bits/ 16 <0>;
+           ti,x-plate-ohms = /bits/ 16 <40>;
+           ti,y-max = /bits/ 16 <4800>;
+           ti,y-min = /bits/ 16 <0>;
+       };
+    };
+
diff --git a/Documentation/devicetree/bindings/power/wakeup-source.txt b/Documentation/devicetree/bindings/power/wakeup-source.txt
index a6c8978964aa1..9a4f8310eb67d 100644
--- a/Documentation/devicetree/bindings/power/wakeup-source.txt
+++ b/Documentation/devicetree/bindings/power/wakeup-source.txt
@@ -25,7 +25,7 @@  List of legacy properties and respective binding document
 2. "has-tpo"			Documentation/devicetree/bindings/rtc/rtc-opal.txt
 3. "linux,wakeup"		Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
 				Documentation/devicetree/bindings/mfd/tc3589x.txt
-				Documentation/devicetree/bindings/input/touchscreen/ads7846.txt
+				Documentation/devicetree/bindings/input/touchscreen/ti,ads7843.yaml
 4. "linux,keypad-wakeup"	Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
 5. "linux,input-wakeup"		Documentation/devicetree/bindings/input/samsung,s3c6410-keypad.yaml
 6. "nvidia,wakeup-source"	Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt