diff mbox series

[1/1] dt-bindings: input: convert rotary-encoder to yaml

Message ID 20240811214656.3773098-1-Frank.Li@nxp.com
State Accepted
Commit 8e028d60ee55a61e88c90028d205c4322327fa8f
Headers show
Series [1/1] dt-bindings: input: convert rotary-encoder to yaml | expand

Commit Message

Frank Li Aug. 11, 2024, 9:46 p.m. UTC
Convert binding doc rotary-encoder.txt to yaml format.

Additional change:
- Only keep one example.

Fix below warning:
arch/arm64/boot/dts/freescale/imx8mn-dimonoff-gateway-evk.dtb: /rotary-encoder:
    failed to match any schema with compatible: ['rotary-encoder']

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 .../bindings/input/rotary-encoder.txt         | 50 -----------
 .../bindings/input/rotary-encoder.yaml        | 90 +++++++++++++++++++
 2 files changed, 90 insertions(+), 50 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/input/rotary-encoder.txt
 create mode 100644 Documentation/devicetree/bindings/input/rotary-encoder.yaml

Comments

Rob Herring (Arm) Aug. 13, 2024, 9:05 p.m. UTC | #1
On Sun, 11 Aug 2024 17:46:55 -0400, Frank Li wrote:
> Convert binding doc rotary-encoder.txt to yaml format.
> 
> Additional change:
> - Only keep one example.
> 
> Fix below warning:
> arch/arm64/boot/dts/freescale/imx8mn-dimonoff-gateway-evk.dtb: /rotary-encoder:
>     failed to match any schema with compatible: ['rotary-encoder']
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
>  .../bindings/input/rotary-encoder.txt         | 50 -----------
>  .../bindings/input/rotary-encoder.yaml        | 90 +++++++++++++++++++
>  2 files changed, 90 insertions(+), 50 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/input/rotary-encoder.txt
>  create mode 100644 Documentation/devicetree/bindings/input/rotary-encoder.yaml
> 

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/input/rotary-encoder.txt b/Documentation/devicetree/bindings/input/rotary-encoder.txt
deleted file mode 100644
index a644408b33b8f..0000000000000
--- a/Documentation/devicetree/bindings/input/rotary-encoder.txt
+++ /dev/null
@@ -1,50 +0,0 @@ 
-Rotary encoder DT bindings
-
-Required properties:
-- gpios: a spec for at least two GPIOs to be used, most significant first
-
-Optional properties:
-- linux,axis: the input subsystem axis to map to this rotary encoder.
-  Defaults to 0 (ABS_X / REL_X)
-- rotary-encoder,steps: Number of steps in a full turnaround of the
-  encoder. Only relevant for absolute axis. Defaults to 24 which is a
-  typical value for such devices.
-- rotary-encoder,relative-axis: register a relative axis rather than an
-  absolute one. Relative axis will only generate +1/-1 events on the input
-  device, hence no steps need to be passed.
-- rotary-encoder,rollover: Automatic rollover when the rotary value becomes
-  greater than the specified steps or smaller than 0. For absolute axis only.
-- rotary-encoder,steps-per-period: Number of steps (stable states) per period.
-  The values have the following meaning:
-  1: Full-period mode (default)
-  2: Half-period mode
-  4: Quarter-period mode
-- wakeup-source: Boolean, rotary encoder can wake up the system.
-- rotary-encoder,encoding: String, the method used to encode steps.
-  Supported are "gray" (the default and more common) and "binary".
-
-Deprecated properties:
-- rotary-encoder,half-period: Makes the driver work on half-period mode.
-  This property is deprecated. Instead, a 'steps-per-period ' value should
-  be used, such as "rotary-encoder,steps-per-period = <2>".
-
-See Documentation/input/devices/rotary-encoder.rst for more information.
-
-Example:
-
-		rotary@0 {
-			compatible = "rotary-encoder";
-			gpios = <&gpio 19 1>, <&gpio 20 0>; /* GPIO19 is inverted */
-			linux,axis = <0>; /* REL_X */
-			rotary-encoder,encoding = "gray";
-			rotary-encoder,relative-axis;
-		};
-
-		rotary@1 {
-			compatible = "rotary-encoder";
-			gpios = <&gpio 21 0>, <&gpio 22 0>;
-			linux,axis = <1>; /* ABS_Y */
-			rotary-encoder,steps = <24>;
-			rotary-encoder,encoding = "binary";
-			rotary-encoder,rollover;
-		};
diff --git a/Documentation/devicetree/bindings/input/rotary-encoder.yaml b/Documentation/devicetree/bindings/input/rotary-encoder.yaml
new file mode 100644
index 0000000000000..e315aab7f584f
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/rotary-encoder.yaml
@@ -0,0 +1,90 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/rotary-encoder.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rotary encoder
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  See Documentation/input/devices/rotary-encoder.rst for more information.
+
+properties:
+  compatible:
+    const: rotary-encoder
+
+  gpios:
+    minItems: 2
+
+  linux,axis:
+    default: 0
+    description:
+      the input subsystem axis to map to this rotary encoder.
+      Defaults to 0 (ABS_X / REL_X)
+
+  rotary-encoder,steps:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 24
+    description:
+      Number of steps in a full turnaround of the
+      encoder. Only relevant for absolute axis. Defaults to 24 which is a
+      typical value for such devices.
+
+  rotary-encoder,relative-axis:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      register a relative axis rather than an
+      absolute one. Relative axis will only generate +1/-1 events on the input
+      device, hence no steps need to be passed.
+
+  rotary-encoder,rollover:
+    $ref: /schemas/types.yaml#/definitions/int32
+    description:
+      Automatic rollover when the rotary value becomes
+      greater than the specified steps or smaller than 0. For absolute axis only.
+
+  rotary-encoder,steps-per-period:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 1
+    enum: [1, 2, 4]
+    description: |
+      Number of steps (stable states) per period.
+      The values have the following meaning:
+      1: Full-period mode (default)
+      2: Half-period mode
+      4: Quarter-period mode
+
+  wakeup-source: true
+
+  rotary-encoder,encoding:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: the method used to encode steps.
+    enum: [gray, binary]
+
+  rotary-encoder,half-period:
+    $ref: /schemas/types.yaml#/definitions/flag
+    deprecated: true
+    description:
+      Makes the driver work on half-period mode.
+      This property is deprecated. Instead, a 'steps-per-period ' value should
+      be used, such as "rotary-encoder,steps-per-period = <2>".
+
+required:
+  - compatible
+  - gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    rotary {
+        compatible = "rotary-encoder";
+        gpios = <&gpio 19 1>, <&gpio 20 0>; /* GPIO19 is inverted */
+        linux,axis = <0>; /* REL_X */
+        rotary-encoder,encoding = "gray";
+        rotary-encoder,relative-axis;
+    };
+