diff mbox series

[v3,2/2] pinctrl: rockchip: Add rk3576 pinctrl support

Message ID 20240814223217.3498-3-detlev.casanova@collabora.com
State Superseded
Headers show
Series Add pinctrl support for rk3576 | expand

Commit Message

Detlev Casanova Aug. 14, 2024, 10:30 p.m. UTC
From: Steven Liu <steven.liu@rock-chips.com>

Add support for the 5 rk3576 GPIO banks.

This also adds support for optionnal support of the sys-grf syscon,
used for i3c software controlled weak pull-up.

Signed-off-by: Steven Liu <steven.liu@rock-chips.com>
[rebase, reword commit message]
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
---
 drivers/pinctrl/pinctrl-rockchip.c | 228 +++++++++++++++++++++++++++++
 drivers/pinctrl/pinctrl-rockchip.h |   2 +
 2 files changed, 230 insertions(+)

Comments

Heiko Stuebner Aug. 15, 2024, 2:05 p.m. UTC | #1
Am Donnerstag, 15. August 2024, 00:30:39 CEST schrieb Detlev Casanova:
> From: Steven Liu <steven.liu@rock-chips.com>
> 
> Add support for the 5 rk3576 GPIO banks.
> 
> This also adds support for optionnal support of the sys-grf syscon,

only one "n" in optional

> used for i3c software controlled weak pull-up.
> 
> Signed-off-by: Steven Liu <steven.liu@rock-chips.com>
> [rebase, reword commit message]
> Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
> ---
>  drivers/pinctrl/pinctrl-rockchip.c | 228 +++++++++++++++++++++++++++++
>  drivers/pinctrl/pinctrl-rockchip.h |   2 +
>  2 files changed, 230 insertions(+)
> 
> diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
> index 0eacaf10c640f..110ed81d650be 100644
> --- a/drivers/pinctrl/pinctrl-rockchip.c
> +++ b/drivers/pinctrl/pinctrl-rockchip.c
> @@ -84,6 +84,27 @@
>  		},							\
>  	}
>  
> +#define PIN_BANK_IOMUX_FLAGS_OFFSET_PULL_FLAGS(id, pins, label, iom0,	\
> +					       iom1, iom2, iom3,	\
> +					       offset0, offset1,	\
> +					       offset2, offset3, pull0,	\
> +					       pull1, pull2, pull3)	\
> +	{								\
> +		.bank_num	= id,					\
> +		.nr_pins	= pins,					\
> +		.name		= label,				\
> +		.iomux		= {					\
> +			{ .type = iom0, .offset = offset0 },		\
> +			{ .type = iom1, .offset = offset1 },		\
> +			{ .type = iom2, .offset = offset2 },		\
> +			{ .type = iom3, .offset = offset3 },		\
> +		},							\
> +		.pull_type[0] = pull0,					\
> +		.pull_type[1] = pull1,					\
> +		.pull_type[2] = pull2,					\
> +		.pull_type[3] = pull3,					\
> +	}
> +
>  #define PIN_BANK_DRV_FLAGS(id, pins, label, type0, type1, type2, type3) \
>  	{								\
>  		.bank_num	= id,					\
> @@ -1120,6 +1141,11 @@ static int rockchip_get_mux(struct rockchip_pin_bank *bank, int pin)
>  	if (bank->recalced_mask & BIT(pin))
>  		rockchip_get_recalced_mux(bank, pin, &reg, &bit, &mask);
>  
> +	if (ctrl->type == RK3576) {
> +		if ((bank->bank_num == 0) && (pin >= RK_PB4) && (pin <= RK_PB7))
> +			reg += 0x1FF4; /* GPIO0_IOC_GPIO0B_IOMUX_SEL_H */

0x1ff4 in lower case please


> +	}
> +
>  	if (ctrl->type == RK3588) {
>  		if (bank->bank_num == 0) {
>  			if ((pin >= RK_PB4) && (pin <= RK_PD7)) {
> @@ -1193,6 +1219,7 @@ static int rockchip_set_mux(struct rockchip_pin_bank *bank, int pin, int mux)
>  	struct device *dev = info->dev;
>  	int iomux_num = (pin / 8);
>  	struct regmap *regmap;
> +	struct regmap *regmap_sys;
>  	int reg, ret, mask, mux_type;
>  	u8 bit;
>  	u32 data, rmask, route_location, route_reg, route_val;
> @@ -1213,6 +1240,8 @@ static int rockchip_set_mux(struct rockchip_pin_bank *bank, int pin, int mux)
>  	else
>  		regmap = info->regmap_base;
>  
> +	regmap_sys = info->regmap_sys_grf;
> +
>  	/* get basic quadrupel of mux registers and the correct reg inside */
>  	mux_type = bank->iomux[iomux_num].type;
>  	reg = bank->iomux[iomux_num].offset;
> @@ -1234,6 +1263,20 @@ static int rockchip_set_mux(struct rockchip_pin_bank *bank, int pin, int mux)
>  	if (bank->recalced_mask & BIT(pin))
>  		rockchip_get_recalced_mux(bank, pin, &reg, &bit, &mask);
>  
> +	if (ctrl->type == RK3576) {
> +		if ((bank->bank_num == 0) && (pin >= RK_PB4) && (pin <= RK_PB7))
> +			reg += 0x1FF4; /* GPIO0_IOC_GPIO0B_IOMUX_SEL_H */

0x1ff4 please

> +		/* i3c0 weakpull controlled by software */
> +		if (((bank->bank_num == 0) && (pin == RK_PC5) && (mux == 0xb)) ||
> +		    ((bank->bank_num == 1) && (pin == RK_PD1) && (mux == 0xa)))
> +			regmap_update_bits(regmap_sys, 0x4, 0xc000c0, 0xc000c0);
> +		/* i3c1 weakpull controlled by software */
> +		if (((bank->bank_num == 2) && (pin == RK_PA5) && (mux == 0xe)) ||
> +		    ((bank->bank_num == 2) && (pin == RK_PD6) && (mux == 0xc)) ||
> +		    ((bank->bank_num == 3) && (pin == RK_PD1) && (mux == 0xb)))
> +			regmap_update_bits(regmap_sys, 0x4, 0x3000300, 0x3000300);

this setting belongs into drivers/soc/rockchip/grf.c .

You want to decide that the i3c controller has no say over the pull
settings, but instead pinctrl should always be in control.

Such default system-wide settings should not clutter up the pinctrl
driver please. The grf-"driver" exists for exactly that case.

That way you also don't need the additional grf-handling here and
in the dt-binding.


> +	}
> +
>  	if (ctrl->type == RK3588) {
>  		if (bank->bank_num == 0) {
>  			if ((pin >= RK_PB4) && (pin <= RK_PD7)) {
> @@ -2038,6 +2081,142 @@ static int rk3568_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
>  	return 0;
>  }
>  
> +#define RK3576_DRV_BITS_PER_PIN		4
> +#define RK3576_DRV_PINS_PER_REG		4
> +#define RK3576_DRV_GPIO0_AL_OFFSET	0x10
> +#define RK3576_DRV_GPIO0_BH_OFFSET	0x2014
> +#define RK3576_DRV_GPIO1_OFFSET		0x6020
> +#define RK3576_DRV_GPIO2_OFFSET		0x6040
> +#define RK3576_DRV_GPIO3_OFFSET		0x6060
> +#define RK3576_DRV_GPIO4_AL_OFFSET	0x6080
> +#define RK3576_DRV_GPIO4_CL_OFFSET	0xA090
> +#define RK3576_DRV_GPIO4_DL_OFFSET	0xB098
> +
> +static int rk3576_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
> +					int pin_num, struct regmap **regmap,
> +					int *reg, u8 *bit)
> +{
> +	struct rockchip_pinctrl *info = bank->drvdata;
> +
> +	*regmap = info->regmap_base;
> +
> +	if (bank->bank_num == 0 && pin_num < 12)
> +		*reg = RK3576_DRV_GPIO0_AL_OFFSET;
> +	else if (bank->bank_num == 0)
> +		*reg = RK3576_DRV_GPIO0_BH_OFFSET - 0xc;
> +	else if (bank->bank_num == 1)
> +		*reg = RK3576_DRV_GPIO1_OFFSET;
> +	else if (bank->bank_num == 2)
> +		*reg = RK3576_DRV_GPIO2_OFFSET;
> +	else if (bank->bank_num == 3)
> +		*reg = RK3576_DRV_GPIO3_OFFSET;
> +	else if (bank->bank_num == 4 && pin_num < 16)
> +		*reg = RK3576_DRV_GPIO4_AL_OFFSET;
> +	else if (bank->bank_num == 4 && pin_num < 24)
> +		*reg = RK3576_DRV_GPIO4_CL_OFFSET - 0x10;
> +	else if (bank->bank_num == 4)
> +		*reg = RK3576_DRV_GPIO4_DL_OFFSET - 0x18;
> +	else
> +		dev_err(info->dev, "unsupported bank_num %d\n", bank->bank_num);
> +
> +	*reg += ((pin_num / RK3576_DRV_PINS_PER_REG) * 4);
> +	*bit = pin_num % RK3576_DRV_PINS_PER_REG;
> +	*bit *= RK3576_DRV_BITS_PER_PIN;
> +
> +	return 0;
> +}
> +
> +#define RK3576_PULL_BITS_PER_PIN	2
> +#define RK3576_PULL_PINS_PER_REG	8
> +#define RK3576_PULL_GPIO0_AL_OFFSET	0x20
> +#define RK3576_PULL_GPIO0_BH_OFFSET	0x2028
> +#define RK3576_PULL_GPIO1_OFFSET	0x6110
> +#define RK3576_PULL_GPIO2_OFFSET	0x6120
> +#define RK3576_PULL_GPIO3_OFFSET	0x6130
> +#define RK3576_PULL_GPIO4_AL_OFFSET	0x6140
> +#define RK3576_PULL_GPIO4_CL_OFFSET	0xA148
> +#define RK3576_PULL_GPIO4_DL_OFFSET	0xB14C
> +
> +static int rk3576_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
> +					 int pin_num, struct regmap **regmap,
> +					 int *reg, u8 *bit)
> +{
> +	struct rockchip_pinctrl *info = bank->drvdata;
> +
> +	*regmap = info->regmap_base;
> +
> +	if (bank->bank_num == 0 && pin_num < 12)
> +		*reg = RK3576_PULL_GPIO0_AL_OFFSET;
> +	else if (bank->bank_num == 0)
> +		*reg = RK3576_PULL_GPIO0_BH_OFFSET - 0x4;
> +	else if (bank->bank_num == 1)
> +		*reg = RK3576_PULL_GPIO1_OFFSET;
> +	else if (bank->bank_num == 2)
> +		*reg = RK3576_PULL_GPIO2_OFFSET;
> +	else if (bank->bank_num == 3)
> +		*reg = RK3576_PULL_GPIO3_OFFSET;
> +	else if (bank->bank_num == 4 && pin_num < 16)
> +		*reg = RK3576_PULL_GPIO4_AL_OFFSET;
> +	else if (bank->bank_num == 4 && pin_num < 24)
> +		*reg = RK3576_PULL_GPIO4_CL_OFFSET - 0x8;
> +	else if (bank->bank_num == 4)
> +		*reg = RK3576_PULL_GPIO4_DL_OFFSET - 0xc;
> +	else
> +		dev_err(info->dev, "unsupported bank_num %d\n", bank->bank_num);
> +
> +	*reg += ((pin_num / RK3576_PULL_PINS_PER_REG) * 4);
> +	*bit = pin_num % RK3576_PULL_PINS_PER_REG;
> +	*bit *= RK3576_PULL_BITS_PER_PIN;
> +
> +	return 0;
> +}
> +
> +#define RK3576_SMT_BITS_PER_PIN		1
> +#define RK3576_SMT_PINS_PER_REG		8
> +#define RK3576_SMT_GPIO0_AL_OFFSET	0x30
> +#define RK3576_SMT_GPIO0_BH_OFFSET	0x2040
> +#define RK3576_SMT_GPIO1_OFFSET		0x6210
> +#define RK3576_SMT_GPIO2_OFFSET		0x6220
> +#define RK3576_SMT_GPIO3_OFFSET		0x6230
> +#define RK3576_SMT_GPIO4_AL_OFFSET	0x6240
> +#define RK3576_SMT_GPIO4_CL_OFFSET	0xA248
> +#define RK3576_SMT_GPIO4_DL_OFFSET	0xB24C
> +
> +static int rk3576_calc_schmitt_reg_and_bit(struct rockchip_pin_bank *bank,
> +					   int pin_num,
> +					   struct regmap **regmap,
> +					   int *reg, u8 *bit)
> +{
> +	struct rockchip_pinctrl *info = bank->drvdata;
> +
> +	*regmap = info->regmap_base;
> +
> +	if (bank->bank_num == 0 && pin_num < 12)
> +		*reg = RK3576_SMT_GPIO0_AL_OFFSET;
> +	else if (bank->bank_num == 0)
> +		*reg = RK3576_SMT_GPIO0_BH_OFFSET - 0x4;
> +	else if (bank->bank_num == 1)
> +		*reg = RK3576_SMT_GPIO1_OFFSET;
> +	else if (bank->bank_num == 2)
> +		*reg = RK3576_SMT_GPIO2_OFFSET;
> +	else if (bank->bank_num == 3)
> +		*reg = RK3576_SMT_GPIO3_OFFSET;
> +	else if (bank->bank_num == 4 && pin_num < 16)
> +		*reg = RK3576_SMT_GPIO4_AL_OFFSET;
> +	else if (bank->bank_num == 4 && pin_num < 24)
> +		*reg = RK3576_SMT_GPIO4_CL_OFFSET - 0x8;
> +	else if (bank->bank_num == 4)
> +		*reg = RK3576_SMT_GPIO4_DL_OFFSET - 0xc;
> +	else
> +		dev_err(info->dev, "unsupported bank_num %d\n", bank->bank_num);
> +
> +	*reg += ((pin_num / RK3576_SMT_PINS_PER_REG) * 4);
> +	*bit = pin_num % RK3576_SMT_PINS_PER_REG;
> +	*bit *= RK3576_SMT_BITS_PER_PIN;
> +
> +	return 0;
> +}
> +
>  #define RK3588_PMU1_IOC_REG		(0x0000)
>  #define RK3588_PMU2_IOC_REG		(0x4000)
>  #define RK3588_BUS_IOC_REG		(0x8000)
> @@ -2332,6 +2511,10 @@ static int rockchip_set_drive_perpin(struct rockchip_pin_bank *bank,
>  		rmask_bits = RK3568_DRV_BITS_PER_PIN;
>  		ret = (1 << (strength + 1)) - 1;
>  		goto config;
> +	} else if (ctrl->type == RK3576) {
> +		rmask_bits = RK3576_DRV_BITS_PER_PIN;
> +		ret = ((strength & BIT(2)) >> 2) | ((strength & BIT(0)) << 2) | (strength & BIT(1));
> +		goto config;
>  	}
>  
>  	if (ctrl->type == RV1126) {
> @@ -2469,6 +2652,7 @@ static int rockchip_get_pull(struct rockchip_pin_bank *bank, int pin_num)
>  	case RK3368:
>  	case RK3399:
>  	case RK3568:
> +	case RK3576:
>  	case RK3588:
>  		pull_type = bank->pull_type[pin_num / 8];
>  		data >>= bit;
> @@ -2528,6 +2712,7 @@ static int rockchip_set_pull(struct rockchip_pin_bank *bank,
>  	case RK3368:
>  	case RK3399:
>  	case RK3568:
> +	case RK3576:
>  	case RK3588:
>  		pull_type = bank->pull_type[pin_num / 8];
>  		ret = -EINVAL;
> @@ -2793,6 +2978,7 @@ static bool rockchip_pinconf_pull_valid(struct rockchip_pin_ctrl *ctrl,
>  	case RK3368:
>  	case RK3399:
>  	case RK3568:
> +	case RK3576:
>  	case RK3588:
>  		return (pull != PIN_CONFIG_BIAS_PULL_PIN_DEFAULT);
>  	}
> @@ -3439,6 +3625,15 @@ static int rockchip_pinctrl_probe(struct platform_device *pdev)
>  		}
>  	}
>  
> +	/* try to find the optional reference to the sys_grf syscon */
> +	node = of_parse_phandle(np, "rockchip,sys-grf", 0);
> +	if (node) {
> +		info->regmap_sys_grf = syscon_node_to_regmap(node);
> +		of_node_put(node);
> +		if (IS_ERR(info->regmap_sys_grf))
> +			return PTR_ERR(info->regmap_sys_grf);
> +	}
> +

not needed if the i3c stuff moves into the grf driver.


>  	/* try to find the optional reference to the pmu syscon */
>  	node = of_parse_phandle(np, "rockchip,pmu", 0);
>  	if (node) {
> @@ -3949,6 +4144,37 @@ static struct rockchip_pin_ctrl rk3568_pin_ctrl = {
>  	.schmitt_calc_reg	= rk3568_calc_schmitt_reg_and_bit,
>  };
>  
> +#define RK3576_PIN_BANK(ID, LABEL, OFFSET0, OFFSET1, OFFSET2, OFFSET3)	\
> +	PIN_BANK_IOMUX_FLAGS_OFFSET_PULL_FLAGS(ID, 32, LABEL,		\
> +					       IOMUX_WIDTH_4BIT,	\
> +					       IOMUX_WIDTH_4BIT,	\
> +					       IOMUX_WIDTH_4BIT,	\
> +					       IOMUX_WIDTH_4BIT,	\
> +					       OFFSET0, OFFSET1,	\
> +					       OFFSET2, OFFSET3,	\
> +					       PULL_TYPE_IO_1V8_ONLY,	\
> +					       PULL_TYPE_IO_1V8_ONLY,	\
> +					       PULL_TYPE_IO_1V8_ONLY,	\
> +					       PULL_TYPE_IO_1V8_ONLY)
> +
> +static struct rockchip_pin_bank rk3576_pin_banks[] = {
> +	RK3576_PIN_BANK(0, "gpio0", 0, 0x8, 0x2004, 0x200C),
> +	RK3576_PIN_BANK(1, "gpio1", 0x4020, 0x4028, 0x4030, 0x4038),
> +	RK3576_PIN_BANK(2, "gpio2", 0x4040, 0x4048, 0x4050, 0x4058),
> +	RK3576_PIN_BANK(3, "gpio3", 0x4060, 0x4068, 0x4070, 0x4078),
> +	RK3576_PIN_BANK(4, "gpio4", 0x4080, 0x4088, 0xA390, 0xB398),
> +};
> +
> +static struct rockchip_pin_ctrl rk3576_pin_ctrl __maybe_unused = {
> +	.pin_banks		= rk3576_pin_banks,
> +	.nr_banks		= ARRAY_SIZE(rk3576_pin_banks),
> +	.label			= "RK3576-GPIO",
> +	.type			= RK3576,
> +	.pull_calc_reg		= rk3576_calc_pull_reg_and_bit,
> +	.drv_calc_reg		= rk3576_calc_drv_reg_and_bit,
> +	.schmitt_calc_reg	= rk3576_calc_schmitt_reg_and_bit,
> +};
> +
>  static struct rockchip_pin_bank rk3588_pin_banks[] = {
>  	RK3588_PIN_BANK_FLAGS(0, 32, "gpio0",
>  			      IOMUX_WIDTH_4BIT, PULL_TYPE_IO_1V8_ONLY),
> @@ -4005,6 +4231,8 @@ static const struct of_device_id rockchip_pinctrl_dt_match[] = {
>  		.data = &rk3399_pin_ctrl },
>  	{ .compatible = "rockchip,rk3568-pinctrl",
>  		.data = &rk3568_pin_ctrl },
> +	{ .compatible = "rockchip,rk3576-pinctrl",
> +		.data = &rk3576_pin_ctrl },
>  	{ .compatible = "rockchip,rk3588-pinctrl",
>  		.data = &rk3588_pin_ctrl },
>  	{},
> diff --git a/drivers/pinctrl/pinctrl-rockchip.h b/drivers/pinctrl/pinctrl-rockchip.h
> index 849266f8b1913..0b2b56014b173 100644
> --- a/drivers/pinctrl/pinctrl-rockchip.h
> +++ b/drivers/pinctrl/pinctrl-rockchip.h
> @@ -197,6 +197,7 @@ enum rockchip_pinctrl_type {
>  	RK3368,
>  	RK3399,
>  	RK3568,
> +	RK3576,
>  	RK3588,
>  };
>  
> @@ -455,6 +456,7 @@ struct rockchip_pinctrl {
>  	int				reg_size;
>  	struct regmap			*regmap_pull;
>  	struct regmap			*regmap_pmu;
> +	struct regmap			*regmap_sys_grf;

same

>  	struct device			*dev;
>  	struct rockchip_pin_ctrl	*ctrl;
>  	struct pinctrl_desc		pctl;
> 


The pinctrl changes for the core rk3576 parts look fine.

Heiko
diff mbox series

Patch

diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
index 0eacaf10c640f..110ed81d650be 100644
--- a/drivers/pinctrl/pinctrl-rockchip.c
+++ b/drivers/pinctrl/pinctrl-rockchip.c
@@ -84,6 +84,27 @@ 
 		},							\
 	}
 
+#define PIN_BANK_IOMUX_FLAGS_OFFSET_PULL_FLAGS(id, pins, label, iom0,	\
+					       iom1, iom2, iom3,	\
+					       offset0, offset1,	\
+					       offset2, offset3, pull0,	\
+					       pull1, pull2, pull3)	\
+	{								\
+		.bank_num	= id,					\
+		.nr_pins	= pins,					\
+		.name		= label,				\
+		.iomux		= {					\
+			{ .type = iom0, .offset = offset0 },		\
+			{ .type = iom1, .offset = offset1 },		\
+			{ .type = iom2, .offset = offset2 },		\
+			{ .type = iom3, .offset = offset3 },		\
+		},							\
+		.pull_type[0] = pull0,					\
+		.pull_type[1] = pull1,					\
+		.pull_type[2] = pull2,					\
+		.pull_type[3] = pull3,					\
+	}
+
 #define PIN_BANK_DRV_FLAGS(id, pins, label, type0, type1, type2, type3) \
 	{								\
 		.bank_num	= id,					\
@@ -1120,6 +1141,11 @@  static int rockchip_get_mux(struct rockchip_pin_bank *bank, int pin)
 	if (bank->recalced_mask & BIT(pin))
 		rockchip_get_recalced_mux(bank, pin, &reg, &bit, &mask);
 
+	if (ctrl->type == RK3576) {
+		if ((bank->bank_num == 0) && (pin >= RK_PB4) && (pin <= RK_PB7))
+			reg += 0x1FF4; /* GPIO0_IOC_GPIO0B_IOMUX_SEL_H */
+	}
+
 	if (ctrl->type == RK3588) {
 		if (bank->bank_num == 0) {
 			if ((pin >= RK_PB4) && (pin <= RK_PD7)) {
@@ -1193,6 +1219,7 @@  static int rockchip_set_mux(struct rockchip_pin_bank *bank, int pin, int mux)
 	struct device *dev = info->dev;
 	int iomux_num = (pin / 8);
 	struct regmap *regmap;
+	struct regmap *regmap_sys;
 	int reg, ret, mask, mux_type;
 	u8 bit;
 	u32 data, rmask, route_location, route_reg, route_val;
@@ -1213,6 +1240,8 @@  static int rockchip_set_mux(struct rockchip_pin_bank *bank, int pin, int mux)
 	else
 		regmap = info->regmap_base;
 
+	regmap_sys = info->regmap_sys_grf;
+
 	/* get basic quadrupel of mux registers and the correct reg inside */
 	mux_type = bank->iomux[iomux_num].type;
 	reg = bank->iomux[iomux_num].offset;
@@ -1234,6 +1263,20 @@  static int rockchip_set_mux(struct rockchip_pin_bank *bank, int pin, int mux)
 	if (bank->recalced_mask & BIT(pin))
 		rockchip_get_recalced_mux(bank, pin, &reg, &bit, &mask);
 
+	if (ctrl->type == RK3576) {
+		if ((bank->bank_num == 0) && (pin >= RK_PB4) && (pin <= RK_PB7))
+			reg += 0x1FF4; /* GPIO0_IOC_GPIO0B_IOMUX_SEL_H */
+		/* i3c0 weakpull controlled by software */
+		if (((bank->bank_num == 0) && (pin == RK_PC5) && (mux == 0xb)) ||
+		    ((bank->bank_num == 1) && (pin == RK_PD1) && (mux == 0xa)))
+			regmap_update_bits(regmap_sys, 0x4, 0xc000c0, 0xc000c0);
+		/* i3c1 weakpull controlled by software */
+		if (((bank->bank_num == 2) && (pin == RK_PA5) && (mux == 0xe)) ||
+		    ((bank->bank_num == 2) && (pin == RK_PD6) && (mux == 0xc)) ||
+		    ((bank->bank_num == 3) && (pin == RK_PD1) && (mux == 0xb)))
+			regmap_update_bits(regmap_sys, 0x4, 0x3000300, 0x3000300);
+	}
+
 	if (ctrl->type == RK3588) {
 		if (bank->bank_num == 0) {
 			if ((pin >= RK_PB4) && (pin <= RK_PD7)) {
@@ -2038,6 +2081,142 @@  static int rk3568_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
 	return 0;
 }
 
+#define RK3576_DRV_BITS_PER_PIN		4
+#define RK3576_DRV_PINS_PER_REG		4
+#define RK3576_DRV_GPIO0_AL_OFFSET	0x10
+#define RK3576_DRV_GPIO0_BH_OFFSET	0x2014
+#define RK3576_DRV_GPIO1_OFFSET		0x6020
+#define RK3576_DRV_GPIO2_OFFSET		0x6040
+#define RK3576_DRV_GPIO3_OFFSET		0x6060
+#define RK3576_DRV_GPIO4_AL_OFFSET	0x6080
+#define RK3576_DRV_GPIO4_CL_OFFSET	0xA090
+#define RK3576_DRV_GPIO4_DL_OFFSET	0xB098
+
+static int rk3576_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
+					int pin_num, struct regmap **regmap,
+					int *reg, u8 *bit)
+{
+	struct rockchip_pinctrl *info = bank->drvdata;
+
+	*regmap = info->regmap_base;
+
+	if (bank->bank_num == 0 && pin_num < 12)
+		*reg = RK3576_DRV_GPIO0_AL_OFFSET;
+	else if (bank->bank_num == 0)
+		*reg = RK3576_DRV_GPIO0_BH_OFFSET - 0xc;
+	else if (bank->bank_num == 1)
+		*reg = RK3576_DRV_GPIO1_OFFSET;
+	else if (bank->bank_num == 2)
+		*reg = RK3576_DRV_GPIO2_OFFSET;
+	else if (bank->bank_num == 3)
+		*reg = RK3576_DRV_GPIO3_OFFSET;
+	else if (bank->bank_num == 4 && pin_num < 16)
+		*reg = RK3576_DRV_GPIO4_AL_OFFSET;
+	else if (bank->bank_num == 4 && pin_num < 24)
+		*reg = RK3576_DRV_GPIO4_CL_OFFSET - 0x10;
+	else if (bank->bank_num == 4)
+		*reg = RK3576_DRV_GPIO4_DL_OFFSET - 0x18;
+	else
+		dev_err(info->dev, "unsupported bank_num %d\n", bank->bank_num);
+
+	*reg += ((pin_num / RK3576_DRV_PINS_PER_REG) * 4);
+	*bit = pin_num % RK3576_DRV_PINS_PER_REG;
+	*bit *= RK3576_DRV_BITS_PER_PIN;
+
+	return 0;
+}
+
+#define RK3576_PULL_BITS_PER_PIN	2
+#define RK3576_PULL_PINS_PER_REG	8
+#define RK3576_PULL_GPIO0_AL_OFFSET	0x20
+#define RK3576_PULL_GPIO0_BH_OFFSET	0x2028
+#define RK3576_PULL_GPIO1_OFFSET	0x6110
+#define RK3576_PULL_GPIO2_OFFSET	0x6120
+#define RK3576_PULL_GPIO3_OFFSET	0x6130
+#define RK3576_PULL_GPIO4_AL_OFFSET	0x6140
+#define RK3576_PULL_GPIO4_CL_OFFSET	0xA148
+#define RK3576_PULL_GPIO4_DL_OFFSET	0xB14C
+
+static int rk3576_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
+					 int pin_num, struct regmap **regmap,
+					 int *reg, u8 *bit)
+{
+	struct rockchip_pinctrl *info = bank->drvdata;
+
+	*regmap = info->regmap_base;
+
+	if (bank->bank_num == 0 && pin_num < 12)
+		*reg = RK3576_PULL_GPIO0_AL_OFFSET;
+	else if (bank->bank_num == 0)
+		*reg = RK3576_PULL_GPIO0_BH_OFFSET - 0x4;
+	else if (bank->bank_num == 1)
+		*reg = RK3576_PULL_GPIO1_OFFSET;
+	else if (bank->bank_num == 2)
+		*reg = RK3576_PULL_GPIO2_OFFSET;
+	else if (bank->bank_num == 3)
+		*reg = RK3576_PULL_GPIO3_OFFSET;
+	else if (bank->bank_num == 4 && pin_num < 16)
+		*reg = RK3576_PULL_GPIO4_AL_OFFSET;
+	else if (bank->bank_num == 4 && pin_num < 24)
+		*reg = RK3576_PULL_GPIO4_CL_OFFSET - 0x8;
+	else if (bank->bank_num == 4)
+		*reg = RK3576_PULL_GPIO4_DL_OFFSET - 0xc;
+	else
+		dev_err(info->dev, "unsupported bank_num %d\n", bank->bank_num);
+
+	*reg += ((pin_num / RK3576_PULL_PINS_PER_REG) * 4);
+	*bit = pin_num % RK3576_PULL_PINS_PER_REG;
+	*bit *= RK3576_PULL_BITS_PER_PIN;
+
+	return 0;
+}
+
+#define RK3576_SMT_BITS_PER_PIN		1
+#define RK3576_SMT_PINS_PER_REG		8
+#define RK3576_SMT_GPIO0_AL_OFFSET	0x30
+#define RK3576_SMT_GPIO0_BH_OFFSET	0x2040
+#define RK3576_SMT_GPIO1_OFFSET		0x6210
+#define RK3576_SMT_GPIO2_OFFSET		0x6220
+#define RK3576_SMT_GPIO3_OFFSET		0x6230
+#define RK3576_SMT_GPIO4_AL_OFFSET	0x6240
+#define RK3576_SMT_GPIO4_CL_OFFSET	0xA248
+#define RK3576_SMT_GPIO4_DL_OFFSET	0xB24C
+
+static int rk3576_calc_schmitt_reg_and_bit(struct rockchip_pin_bank *bank,
+					   int pin_num,
+					   struct regmap **regmap,
+					   int *reg, u8 *bit)
+{
+	struct rockchip_pinctrl *info = bank->drvdata;
+
+	*regmap = info->regmap_base;
+
+	if (bank->bank_num == 0 && pin_num < 12)
+		*reg = RK3576_SMT_GPIO0_AL_OFFSET;
+	else if (bank->bank_num == 0)
+		*reg = RK3576_SMT_GPIO0_BH_OFFSET - 0x4;
+	else if (bank->bank_num == 1)
+		*reg = RK3576_SMT_GPIO1_OFFSET;
+	else if (bank->bank_num == 2)
+		*reg = RK3576_SMT_GPIO2_OFFSET;
+	else if (bank->bank_num == 3)
+		*reg = RK3576_SMT_GPIO3_OFFSET;
+	else if (bank->bank_num == 4 && pin_num < 16)
+		*reg = RK3576_SMT_GPIO4_AL_OFFSET;
+	else if (bank->bank_num == 4 && pin_num < 24)
+		*reg = RK3576_SMT_GPIO4_CL_OFFSET - 0x8;
+	else if (bank->bank_num == 4)
+		*reg = RK3576_SMT_GPIO4_DL_OFFSET - 0xc;
+	else
+		dev_err(info->dev, "unsupported bank_num %d\n", bank->bank_num);
+
+	*reg += ((pin_num / RK3576_SMT_PINS_PER_REG) * 4);
+	*bit = pin_num % RK3576_SMT_PINS_PER_REG;
+	*bit *= RK3576_SMT_BITS_PER_PIN;
+
+	return 0;
+}
+
 #define RK3588_PMU1_IOC_REG		(0x0000)
 #define RK3588_PMU2_IOC_REG		(0x4000)
 #define RK3588_BUS_IOC_REG		(0x8000)
@@ -2332,6 +2511,10 @@  static int rockchip_set_drive_perpin(struct rockchip_pin_bank *bank,
 		rmask_bits = RK3568_DRV_BITS_PER_PIN;
 		ret = (1 << (strength + 1)) - 1;
 		goto config;
+	} else if (ctrl->type == RK3576) {
+		rmask_bits = RK3576_DRV_BITS_PER_PIN;
+		ret = ((strength & BIT(2)) >> 2) | ((strength & BIT(0)) << 2) | (strength & BIT(1));
+		goto config;
 	}
 
 	if (ctrl->type == RV1126) {
@@ -2469,6 +2652,7 @@  static int rockchip_get_pull(struct rockchip_pin_bank *bank, int pin_num)
 	case RK3368:
 	case RK3399:
 	case RK3568:
+	case RK3576:
 	case RK3588:
 		pull_type = bank->pull_type[pin_num / 8];
 		data >>= bit;
@@ -2528,6 +2712,7 @@  static int rockchip_set_pull(struct rockchip_pin_bank *bank,
 	case RK3368:
 	case RK3399:
 	case RK3568:
+	case RK3576:
 	case RK3588:
 		pull_type = bank->pull_type[pin_num / 8];
 		ret = -EINVAL;
@@ -2793,6 +2978,7 @@  static bool rockchip_pinconf_pull_valid(struct rockchip_pin_ctrl *ctrl,
 	case RK3368:
 	case RK3399:
 	case RK3568:
+	case RK3576:
 	case RK3588:
 		return (pull != PIN_CONFIG_BIAS_PULL_PIN_DEFAULT);
 	}
@@ -3439,6 +3625,15 @@  static int rockchip_pinctrl_probe(struct platform_device *pdev)
 		}
 	}
 
+	/* try to find the optional reference to the sys_grf syscon */
+	node = of_parse_phandle(np, "rockchip,sys-grf", 0);
+	if (node) {
+		info->regmap_sys_grf = syscon_node_to_regmap(node);
+		of_node_put(node);
+		if (IS_ERR(info->regmap_sys_grf))
+			return PTR_ERR(info->regmap_sys_grf);
+	}
+
 	/* try to find the optional reference to the pmu syscon */
 	node = of_parse_phandle(np, "rockchip,pmu", 0);
 	if (node) {
@@ -3949,6 +4144,37 @@  static struct rockchip_pin_ctrl rk3568_pin_ctrl = {
 	.schmitt_calc_reg	= rk3568_calc_schmitt_reg_and_bit,
 };
 
+#define RK3576_PIN_BANK(ID, LABEL, OFFSET0, OFFSET1, OFFSET2, OFFSET3)	\
+	PIN_BANK_IOMUX_FLAGS_OFFSET_PULL_FLAGS(ID, 32, LABEL,		\
+					       IOMUX_WIDTH_4BIT,	\
+					       IOMUX_WIDTH_4BIT,	\
+					       IOMUX_WIDTH_4BIT,	\
+					       IOMUX_WIDTH_4BIT,	\
+					       OFFSET0, OFFSET1,	\
+					       OFFSET2, OFFSET3,	\
+					       PULL_TYPE_IO_1V8_ONLY,	\
+					       PULL_TYPE_IO_1V8_ONLY,	\
+					       PULL_TYPE_IO_1V8_ONLY,	\
+					       PULL_TYPE_IO_1V8_ONLY)
+
+static struct rockchip_pin_bank rk3576_pin_banks[] = {
+	RK3576_PIN_BANK(0, "gpio0", 0, 0x8, 0x2004, 0x200C),
+	RK3576_PIN_BANK(1, "gpio1", 0x4020, 0x4028, 0x4030, 0x4038),
+	RK3576_PIN_BANK(2, "gpio2", 0x4040, 0x4048, 0x4050, 0x4058),
+	RK3576_PIN_BANK(3, "gpio3", 0x4060, 0x4068, 0x4070, 0x4078),
+	RK3576_PIN_BANK(4, "gpio4", 0x4080, 0x4088, 0xA390, 0xB398),
+};
+
+static struct rockchip_pin_ctrl rk3576_pin_ctrl __maybe_unused = {
+	.pin_banks		= rk3576_pin_banks,
+	.nr_banks		= ARRAY_SIZE(rk3576_pin_banks),
+	.label			= "RK3576-GPIO",
+	.type			= RK3576,
+	.pull_calc_reg		= rk3576_calc_pull_reg_and_bit,
+	.drv_calc_reg		= rk3576_calc_drv_reg_and_bit,
+	.schmitt_calc_reg	= rk3576_calc_schmitt_reg_and_bit,
+};
+
 static struct rockchip_pin_bank rk3588_pin_banks[] = {
 	RK3588_PIN_BANK_FLAGS(0, 32, "gpio0",
 			      IOMUX_WIDTH_4BIT, PULL_TYPE_IO_1V8_ONLY),
@@ -4005,6 +4231,8 @@  static const struct of_device_id rockchip_pinctrl_dt_match[] = {
 		.data = &rk3399_pin_ctrl },
 	{ .compatible = "rockchip,rk3568-pinctrl",
 		.data = &rk3568_pin_ctrl },
+	{ .compatible = "rockchip,rk3576-pinctrl",
+		.data = &rk3576_pin_ctrl },
 	{ .compatible = "rockchip,rk3588-pinctrl",
 		.data = &rk3588_pin_ctrl },
 	{},
diff --git a/drivers/pinctrl/pinctrl-rockchip.h b/drivers/pinctrl/pinctrl-rockchip.h
index 849266f8b1913..0b2b56014b173 100644
--- a/drivers/pinctrl/pinctrl-rockchip.h
+++ b/drivers/pinctrl/pinctrl-rockchip.h
@@ -197,6 +197,7 @@  enum rockchip_pinctrl_type {
 	RK3368,
 	RK3399,
 	RK3568,
+	RK3576,
 	RK3588,
 };
 
@@ -455,6 +456,7 @@  struct rockchip_pinctrl {
 	int				reg_size;
 	struct regmap			*regmap_pull;
 	struct regmap			*regmap_pmu;
+	struct regmap			*regmap_sys_grf;
 	struct device			*dev;
 	struct rockchip_pin_ctrl	*ctrl;
 	struct pinctrl_desc		pctl;