@@ -37,6 +37,32 @@ properties:
"#interrupt-cells":
const: 2
+ vaud28-supply:
+ description: 2.8 volt supply phandle for the audio codec
+
+ audio-codec:
+ type: object
+ properties:
+ mediatek,hp-pull-down:
+ description:
+ Earphone driver positive output stage short to
+ the audio reference ground.
+ type: boolean
+
+ mediatek,micbias0-microvolt:
+ description: Selects MIC Bias 0 output voltage.
+ enum: [1700000, 1800000, 1900000, 2000000,
+ 2100000, 2500000, 2600000, 2700000]
+ default: 1700000
+
+ mediatek,micbias1-microvolt:
+ description: Selects MIC Bias 1 output voltage.
+ enum: [1700000, 1800000, 1900000, 2000000,
+ 2100000, 2500000, 2600000, 2700000]
+ default: 1700000
+
+ unevaluatedProperties: false
+
regulators:
type: object
$ref: /schemas/regulator/mediatek,mt6357-regulator.yaml
@@ -67,6 +93,7 @@ properties:
required:
- compatible
- regulators
+ - vaud28-supply
additionalProperties: false
@@ -81,8 +108,14 @@ examples:
interrupt-parent = <&pio>;
interrupts = <145 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
+ vaud28-supply = <&mt6357_vaud28_reg>;
#interrupt-cells = <2>;
+ audio-codec {
+ mediatek,micbias0-microvolt = <1700000>;
+ mediatek,micbias1-microvolt = <1700000>;
+ };
+
regulators {
mt6357_vproc_reg: buck-vproc {
regulator-name = "vproc";
Add the audio codec sub-device. This sub-device is used to set the optional voltage values according to the hardware. The properties are: - Setup of microphone bias voltage. - Setup of the speaker pin pull-down. Also, add the audio power supply property which is dedicated for the audio codec sub-device. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> --- .../devicetree/bindings/mfd/mediatek,mt6357.yaml | 33 ++++++++++++++++++++++ 1 file changed, 33 insertions(+)