diff mbox series

[v3,3/9] pinctrl: renesas: rzg2l: Support output enable on RZ/G2L

Message ID 20240625200316.4282-4-paul.barker.ct@bp.renesas.com
State New
Headers show
Series [v3,1/9] pinctrl: renesas: rzg2l: Clarify OEN read/write support | expand

Commit Message

Paul Barker June 25, 2024, 8:03 p.m. UTC 
On the RZ/G2L SoC family, the direction of the Ethernet TXC/TX_CLK
signal is selectable to support an Ethernet PHY operating in either MII
or RGMII mode. By default, the signal is configured as an input and MII
mode is supported. The ETH_MODE register can be modified to configure
this signal as an output to support RGMII mode.

As this signal is by default an input, and can optionally be switched to
an output, it maps neatly onto an `output-enable` property in the device
tree.

Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
---
Changes v2->v3:
  * Picked up Linus W's Acked-by tag & Geert's Reviewed-by tag.
  * Simplify arguments to rzg2l_pin_to_oen_bit() and decode pin/caps
    inside this function. No check is needed for dedicated pins as no
    dedicated pins support OEN in the RZ/G2L family.
Changes v1->v2:
  * Use oen_read and oen_write function pointers to be compatible with
    recent patches adding RZ/V2H support.

 drivers/pinctrl/renesas/pinctrl-rzg2l.c | 68 +++++++++++++++++++++++--
 1 file changed, 64 insertions(+), 4 deletions(-)

Comments

Geert Uytterhoeven July 4, 2024, 5:29 p.m. UTC | #1 
Hi Paul,

On Tue, Jun 25, 2024 at 10:03 PM Paul Barker
<paul.barker.ct@bp.renesas.com> wrote:
> On the RZ/G2L SoC family, the direction of the Ethernet TXC/TX_CLK
> signal is selectable to support an Ethernet PHY operating in either MII
> or RGMII mode. By default, the signal is configured as an input and MII
> mode is supported. The ETH_MODE register can be modified to configure
> this signal as an output to support RGMII mode.
>
> As this signal is by default an input, and can optionally be switched to
> an output, it maps neatly onto an `output-enable` property in the device
> tree.
>
> Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> Acked-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> Changes v2->v3:
>   * Picked up Linus W's Acked-by tag & Geert's Reviewed-by tag.
>   * Simplify arguments to rzg2l_pin_to_oen_bit() and decode pin/caps
>     inside this function. No check is needed for dedicated pins as no
>     dedicated pins support OEN in the RZ/G2L family.

Thanks for the update!

> --- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> +++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> @@ -994,6 +994,61 @@ static bool rzg2l_ds_is_supported(struct rzg2l_pinctrl *pctrl, u32 caps,
>         return false;
>  }
>
> +static int rzg2l_pin_to_oen_bit(struct rzg2l_pinctrl *pctrl, unsigned int _pin)
> +{
> +       u64 *pin_data = pctrl->desc.pins[_pin].drv_data;
> +       u64 caps = FIELD_GET(PIN_CFG_MASK, *pin_data);
> +       u8 max_pin = pctrl->data->hwcfg->oen_max_pin;
> +       u8 pin = RZG2L_PIN_ID_TO_PIN(_pin);
> +
> +       if (pin > max_pin)

Likewise 2/9, just use the original directly.
No need to resend, I can do this while applying.

Gr{oetje,eeting}s,

                        Geert
diff mbox series

Patch

diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
index 737d8d0064c4..b7d1cfb023b2 100644
--- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
+++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
@@ -994,6 +994,61 @@  static bool rzg2l_ds_is_supported(struct rzg2l_pinctrl *pctrl, u32 caps,
 	return false;
 }
 
+static int rzg2l_pin_to_oen_bit(struct rzg2l_pinctrl *pctrl, unsigned int _pin)
+{
+	u64 *pin_data = pctrl->desc.pins[_pin].drv_data;
+	u64 caps = FIELD_GET(PIN_CFG_MASK, *pin_data);
+	u8 max_pin = pctrl->data->hwcfg->oen_max_pin;
+	u8 pin = RZG2L_PIN_ID_TO_PIN(_pin);
+
+	if (pin > max_pin)
+		return -EINVAL;
+
+	/*
+	 * We can determine which Ethernet interface we're dealing with from
+	 * the caps.
+	 */
+	if (caps & PIN_CFG_IO_VMC_ETH0)
+		return 0;
+	if (caps & PIN_CFG_IO_VMC_ETH1)
+		return 1;
+
+	return -EINVAL;
+}
+
+static u32 rzg2l_read_oen(struct rzg2l_pinctrl *pctrl, unsigned int _pin)
+{
+	int bit;
+
+	bit = rzg2l_pin_to_oen_bit(pctrl, _pin);
+	if (bit < 0)
+		return 0;
+
+	return !(readb(pctrl->base + ETH_MODE) & BIT(bit));
+}
+
+static int rzg2l_write_oen(struct rzg2l_pinctrl *pctrl, unsigned int _pin, u8 oen)
+{
+	unsigned long flags;
+	int bit;
+	u8 val;
+
+	bit = rzg2l_pin_to_oen_bit(pctrl, _pin);
+	if (bit < 0)
+		return bit;
+
+	spin_lock_irqsave(&pctrl->lock, flags);
+	val = readb(pctrl->base + ETH_MODE);
+	if (oen)
+		val &= ~BIT(bit);
+	else
+		val |= BIT(bit);
+	writeb(val, pctrl->base + ETH_MODE);
+	spin_unlock_irqrestore(&pctrl->lock, flags);
+
+	return 0;
+}
+
 static int rzg3s_pin_to_oen_bit(struct rzg2l_pinctrl *pctrl, unsigned int _pin)
 {
 	u64 *pin_data = pctrl->desc.pins[_pin].drv_data;
@@ -1772,7 +1827,7 @@  static const u64 r9a07g044_gpio_configs[] = {
 	RZG2L_GPIO_PORT_PACK(3, 0x21, RZG2L_MPXED_PIN_FUNCS),
 	RZG2L_GPIO_PORT_PACK(2, 0x22, RZG2L_MPXED_PIN_FUNCS),
 	RZG2L_GPIO_PORT_PACK(2, 0x23, RZG2L_MPXED_PIN_FUNCS),
-	RZG2L_GPIO_PORT_PACK(3, 0x24, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
+	RZG2L_GPIO_PORT_PACK(3, 0x24, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0) | PIN_CFG_OEN),
 	RZG2L_GPIO_PORT_PACK(2, 0x25, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
 	RZG2L_GPIO_PORT_PACK(2, 0x26, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
 	RZG2L_GPIO_PORT_PACK(2, 0x27, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
@@ -1781,7 +1836,7 @@  static const u64 r9a07g044_gpio_configs[] = {
 	RZG2L_GPIO_PORT_PACK(2, 0x2a, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
 	RZG2L_GPIO_PORT_PACK(2, 0x2b, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
 	RZG2L_GPIO_PORT_PACK(2, 0x2c, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
-	RZG2L_GPIO_PORT_PACK(2, 0x2d, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
+	RZG2L_GPIO_PORT_PACK(2, 0x2d, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1) | PIN_CFG_OEN),
 	RZG2L_GPIO_PORT_PACK(2, 0x2e, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
 	RZG2L_GPIO_PORT_PACK(2, 0x2f, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
 	RZG2L_GPIO_PORT_PACK(2, 0x30, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
@@ -1805,13 +1860,13 @@  static const u64 r9a07g044_gpio_configs[] = {
 
 static const u64 r9a07g043_gpio_configs[] = {
 	RZG2L_GPIO_PORT_PACK(4, 0x10, RZG2L_MPXED_PIN_FUNCS),
-	RZG2L_GPIO_PORT_PACK(5, 0x11, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
+	RZG2L_GPIO_PORT_PACK(5, 0x11, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0) | PIN_CFG_OEN),
 	RZG2L_GPIO_PORT_PACK(4, 0x12, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
 	RZG2L_GPIO_PORT_PACK(4, 0x13, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
 	RZG2L_GPIO_PORT_PACK(6, 0x14, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
 	RZG2L_GPIO_PORT_PACK(5, 0x15, RZG2L_MPXED_PIN_FUNCS),
 	RZG2L_GPIO_PORT_PACK(5, 0x16, RZG2L_MPXED_PIN_FUNCS),
-	RZG2L_GPIO_PORT_PACK(5, 0x17, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
+	RZG2L_GPIO_PORT_PACK(5, 0x17, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1) | PIN_CFG_OEN),
 	RZG2L_GPIO_PORT_PACK(5, 0x18, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
 	RZG2L_GPIO_PORT_PACK(4, 0x19, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
 	RZG2L_GPIO_PORT_PACK(5, 0x1a, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
@@ -3004,6 +3059,7 @@  static const struct rzg2l_hwcfg rzg2l_hwcfg = {
 		[RZG2L_IOLH_IDX_3V3] = 2000, 4000, 8000, 12000,
 	},
 	.iolh_groupb_oi = { 100, 66, 50, 33, },
+	.oen_max_pin = 0,
 };
 
 static const struct rzg2l_hwcfg rzg3s_hwcfg = {
@@ -3058,6 +3114,8 @@  static struct rzg2l_pinctrl_data r9a07g043_data = {
 #endif
 	.pwpr_pfc_lock_unlock = &rzg2l_pwpr_pfc_lock_unlock,
 	.pmc_writeb = &rzg2l_pmc_writeb,
+	.oen_read = &rzg2l_read_oen,
+	.oen_write = &rzg2l_write_oen,
 	.hw_to_bias_param = &rzg2l_hw_to_bias_param,
 	.bias_param_to_hw = &rzg2l_bias_param_to_hw,
 };
@@ -3073,6 +3131,8 @@  static struct rzg2l_pinctrl_data r9a07g044_data = {
 	.hwcfg = &rzg2l_hwcfg,
 	.pwpr_pfc_lock_unlock = &rzg2l_pwpr_pfc_lock_unlock,
 	.pmc_writeb = &rzg2l_pmc_writeb,
+	.oen_read = &rzg2l_read_oen,
+	.oen_write = &rzg2l_write_oen,
 	.hw_to_bias_param = &rzg2l_hw_to_bias_param,
 	.bias_param_to_hw = &rzg2l_bias_param_to_hw,
 };