diff mbox series

[v1] ARM: dts: twl6032: Add DTS file for TWL6032 PMIC

Message ID 20240611132134.31269-1-bavishimithil@gmail.com
State New
Headers show
Series [v1] ARM: dts: twl6032: Add DTS file for TWL6032 PMIC | expand

Commit Message

Mithil Bavishi June 11, 2024, 1:21 p.m. UTC 
From: Mithil Bavishi <bavishimithil@gmail.com>

Add a dedicated DTS file for the TWL6032 PMIC (Phoenix Lite). Already
has driver support with TWL6030 (Phoenix) since both of them are so
similar, some nodes can be reused from TWL6030 as well.

This can be included in the board files like twl6030.
Example:
...
&i2c1 {
    twl: twl@48 {
        reg = <0x48>;
        interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
        interrupt-controller;
        interrupt-parent = <&gic>;
    };
};

/include/ "twl6032.dtsi"
...

Used in devices like samsung-espresso, amazon-jem, epson-embt2ws etc.

Regulator values are found from downstream kernel for espresso.

Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
---
 arch/arm/boot/dts/ti/omap/twl6032.dtsi | 94 ++++++++++++++++++++++++++
 1 file changed, 94 insertions(+)
 create mode 100644 arch/arm/boot/dts/ti/omap/twl6032.dtsi

Comments

Mithil Bavishi June 20, 2024, 1:05 p.m. UTC | #1 
Hello, how should we go ahead with this?
Krzysztof Kozlowski June 20, 2024, 1:15 p.m. UTC | #2 
On 20/06/2024 15:05, Mithil wrote:
> Hello, how should we go ahead with this?

It's impossible to figure out what you refer to. Please fix your email
client so you preserve relevant context and readers can understand to
whom and about what you are replying.

Best regards,
Krzysztof
Andreas Kemnade June 20, 2024, 2:18 p.m. UTC | #3 
Hi Mithil,

Am Thu, 13 Jun 2024 14:15:19 +0530
schrieb Mithil <bavishimithil@gmail.com>:

> On Tue, Jun 11, 2024 at 8:19 PM Andreas Kemnade
> <andreas@kemnade.info> wrote:
> > I think the twl6030.dtsi and twl6032.dtsi should be as similar as
> > possible.  
> 
> Hey the values seem to be different for twl6030.dtsi,
> omap4-epson-embt2ws.dts, and omap4-samsung-espresso-common.dtsi.
> Should we just define the nodes in twl6032.dtsi and let them put
> min/max volts and other properties in the board files?
> 
IMHO either the full range there and override board specific stuff in
the *.dts files or no voltages.

Regards,
Andreas
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/ti/omap/twl6032.dtsi b/arch/arm/boot/dts/ti/omap/twl6032.dtsi
new file mode 100644
index 000000000..a48723a24
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/twl6032.dtsi
@@ -0,0 +1,95 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Integrated Power Management Chip
+ * https://www.ti.com/lit/ds/symlink/twl6032.pdf
+ */
+
+&twl {
+	compatible = "ti,twl6032";
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	rtc {
+		compatible = "ti,twl4030-rtc";
+		interrupts = <11>;
+	};
+
+	vana: regulator-vana {
+		compatible = "ti,twl6030-vana";
+		regulator-min-microvolt = <2100000>;
+		regulator-max-microvolt = <2100000>;
+		regulator-always-on;
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	ldo1: regulator-ldo1 {
+		compatible = "ti,twl6032-ldo1";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	ldo3: regulator-ldo3 {
+		compatible = "ti,twl6032-ldo3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	ldo4: regulator-ldo4 {
+		compatible = "ti,twl6032-ldo4";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+	};
+
+	ldo5: regulator-ldo5 {
+		compatible = "ti,twl6032-ldo5";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	ldo6: regulator-ldo6 {
+		compatible = "ti,twl6032-ldo6";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	smps4: regulator-smps4 {
+		compatible = "ti,twl6032-smps4";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	ldousb: regulator-ldousb {
+		compatible = "ti,twl6032-ldousb";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	gpadc: gpadc {
+		compatible = "ti,twl6032-gpadc";
+		interrupts = <3>;
+		#io-channel-cells = <1>;
+	};
+
+	twl_usb_comparator: usb-comparator {
+		compatible = "ti,twl6030-usb";
+		interrupts = <4>, <10>;
+	};
+};