diff mbox series

[net-next,6/7] selftests: net: Use the provided dpctl rather than the vswitchd for tests.

Message ID 20240617180218.1154326-7-aconole@redhat.com
State Accepted
Commit b7ce46fc614d4d31d438878ade1e4d0c3ef890c7
Headers show
Series selftests: net: Switch pmtu.sh to use the internal ovs script. | expand

Commit Message

Aaron Conole June 17, 2024, 6:02 p.m. UTC
The current pmtu test infrastucture requires an installed copy of the
ovs-vswitchd userspace.  This means that any automated or constrained
environments may not have the requisite tools to run the tests.  However,
the pmtu tests don't require any special classifier processing.  Indeed
they are only using the vswitchd in the most basic mode - as a NORMAL
switch.

However, the ovs-dpctl kernel utility can now program all the needed basic
flows to allow traffic to traverse the tunnels and provide support for at
least testing some basic pmtu scenarios.  More complicated flow pipelines
can be added to the internal ovs test infrastructure, but that is work for
the future.  For now, enable the most common cases - wide mega flows with
no other prerequisites.

Enhance the pmtu testing to try testing using the internal utility, first.
As a fallback, if the internal utility isn't running, then try with the
ovs-vswitchd userspace tools.

Signed-off-by: Aaron Conole <aconole@redhat.com>
---
 tools/testing/selftests/net/pmtu.sh | 145 +++++++++++++++++++++++-----
 1 file changed, 123 insertions(+), 22 deletions(-)

Comments

Aaron Conole June 18, 2024, 4:02 p.m. UTC | #1
Aaron Conole <aconole@redhat.com> writes:

> The current pmtu test infrastucture requires an installed copy of the
> ovs-vswitchd userspace.  This means that any automated or constrained
> environments may not have the requisite tools to run the tests.  However,
> the pmtu tests don't require any special classifier processing.  Indeed
> they are only using the vswitchd in the most basic mode - as a NORMAL
> switch.
>
> However, the ovs-dpctl kernel utility can now program all the needed basic
> flows to allow traffic to traverse the tunnels and provide support for at
> least testing some basic pmtu scenarios.  More complicated flow pipelines
> can be added to the internal ovs test infrastructure, but that is work for
> the future.  For now, enable the most common cases - wide mega flows with
> no other prerequisites.
>
> Enhance the pmtu testing to try testing using the internal utility, first.
> As a fallback, if the internal utility isn't running, then try with the
> ovs-vswitchd userspace tools.
>
> Signed-off-by: Aaron Conole <aconole@redhat.com>
> ---
>  tools/testing/selftests/net/pmtu.sh | 145 +++++++++++++++++++++++-----
>  1 file changed, 123 insertions(+), 22 deletions(-)
>
> diff --git a/tools/testing/selftests/net/pmtu.sh b/tools/testing/selftests/net/pmtu.sh
> index cfc84958025a..51ccb9bed069 100755
> --- a/tools/testing/selftests/net/pmtu.sh
> +++ b/tools/testing/selftests/net/pmtu.sh
> @@ -842,25 +842,97 @@ setup_bridge() {
>  	run_cmd ${ns_a} ip link set veth_A-C master br0
>  }
>  
> +setup_ovs_via_internal_utility() {
> +	type="${1}"
> +	a_addr="${2}"
> +	b_addr="${3}"
> +	dport="${4}"
> +
> +	run_cmd python3 ./openvswitch/ovs-dpctl.py add-if ovs_br0 ${type}_a -t ${type} || return 1
> +
> +	ports=$(python3 ./openvswitch/ovs-dpctl.py show)
> +	br0_port=$(echo "$ports" | grep -E "\sovs_br0" | sed -e 's@port @@' | cut -d: -f1 | xargs)
> +	type_a_port=$(echo "$ports" | grep ${type}_a | sed -e 's@port @@' | cut -d: -f1 | xargs)
> +	veth_a_port=$(echo "$ports" | grep veth_A | sed -e 's@port @@' | cut -d: -f1 | xargs)
> +
> +	v4_a_tun="${prefix4}.${a_r1}.1"
> +	v4_b_tun="${prefix4}.${b_r1}.1"
> +
> +	v6_a_tun="${prefix6}:${a_r1}::1"
> +	v6_b_tun="${prefix6}:${b_r1}::1"
> +
> +	if [ "${v4_a_tun}" = "${a_addr}" ]; then
> +		run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \
> +		    "recirc_id(0),in_port(${veth_a_port}),eth(),eth_type(0x0800),ipv4()" \
> +		    "set(tunnel(tun_id=1,dst=${v4_b_tun},ttl=64,tp_dst=${dport},flags(df|csum))),${type_a_port}"
> +		run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \
> +		    "recirc_id(0),in_port(${veth_a_port}),eth(),eth_type(0x86dd),ipv6()" \
> +		    "set(tunnel(tun_id=1,dst=${v4_b_tun},ttl=64,tp_dst=${dport},flags(df|csum))),${type_a_port}"
> +		run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \
> +		    "recirc_id(0),tunnel(tun_id=1,src=${v4_b_tun},dst=${v4_a_tun}),in_port(${type_a_port}),eth(),eth_type(0x0800),ipv4()" \
> +		    "${veth_a_port}"
> +		run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \
> +		    "recirc_id(0),tunnel(tun_id=1,src=${v4_b_tun},dst=${v4_a_tun}),in_port(${type_a_port}),eth(),eth_type(0x86dd),ipv6()" \
> +		    "${veth_a_port}"
> +		run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \
> +		    "recirc_id(0),tunnel(tun_id=1,src=${v4_b_tun},dst=${v4_a_tun}),in_port(${type_a_port}),eth(),eth_type(0x0806),arp()" \
> +		    "${veth_a_port}"
> +		run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \
> +		    "recirc_id(0),in_port(${veth_a_port}),eth(),eth_type(0x0806),arp(sip=${veth4_c_addr},tip=${tunnel4_b_addr})" \
> +		    "set(tunnel(tun_id=1,dst=${v4_b_tun},ttl=64,tp_dst=${dport},flags(df|csum))),${type_a_port}"
> +	else
> +		run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \
> +		    "recirc_id(0),in_port(${veth_a_port}),eth(),eth_type(0x0800),ipv4()" \
> +		    "set(tunnel(tun_id=1,ipv6_dst=${v6_b_tun},ttl=64,tp_dst=${dport},flags(df|csum))),${type_a_port}"
> +		run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \
> +		    "recirc_id(0),in_port(${veth_a_port}),eth(),eth_type(0x86dd),ipv6()" \
> +		    "set(tunnel(tun_id=1,ipv6_dst=${v6_b_tun},ttl=64,tp_dst=${dport},flags(df|csum))),${type_a_port}"
> +		run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \
> +		    "recirc_id(0),tunnel(tun_id=1,ipv6_src=${v6_b_tun},ipv6_dst=${v6_a_tun}),in_port(${type_a_port}),eth(),eth_type(0x0800),ipv4()" \
> +		    "${veth_a_port}"
> +		run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \
> +		    "recirc_id(0),tunnel(tun_id=1,ipv6_src=${v6_b_tun},ipv6_dst=${v6_a_tun}),in_port(${type_a_port}),eth(),eth_type(0x86dd),ipv6()" \
> +		    "${veth_a_port}"
> +		run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \
> +		    "recirc_id(0),tunnel(tun_id=1,ipv6_src=${v6_b_tun},ipv6_dst=${v6_a_tun}),in_port(${type_a_port}),eth(),eth_type(0x0806),arp()" \
> +		    "${veth_a_port}"
> +		run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \
> +		    "recirc_id(0),in_port(${veth_a_port}),eth(),eth_type(0x0806),arp(sip=${veth4_c_addr},tip=${tunnel4_b_addr})" \
> +		    "set(tunnel(tun_id=1,ipv6_dst=${v6_b_tun},ttl=64,tp_dst=${dport},flags(df|csum))),${type_a_port}"
> +	fi
> +}
> +
> +setup_ovs_via_vswitchd() {
> +	type="${1}"
> +	b_addr="${2}"
> +
> +	run_cmd ovs-vsctl add-port ovs_br0 ${type}_a -- \
> +		set interface ${type}_a type=${type} \
> +		options:remote_ip=${b_addr} options:key=1 options:csum=true || return 1
> +}
> +
>  setup_ovs_vxlan_or_geneve() {
>  	type="${1}"
>  	a_addr="${2}"
>  	b_addr="${3}"
> +	dport="6081"
>  
>  	if [ "${type}" = "vxlan" ]; then
> +		dport="4789"
>  		opts="${opts} ttl 64 dstport 4789"
>  		opts_b="local ${b_addr}"
>  	fi
>  
> -	run_cmd ovs-vsctl add-port ovs_br0 ${type}_a -- \
> -		set interface ${type}_a type=${type} \
> -		options:remote_ip=${b_addr} options:key=1 options:csum=true || return 1
> +	setup_ovs_via_internal_utility "${type}" "${a_addr}" "${b_addr}" \
> +				       "${dport}" || \
> +	    setup_ovs_via_vswitchd "${type}" "${b_addr}" || return 1
>  
>  	run_cmd ${ns_b} ip link add ${type}_b type ${type} id 1 ${opts_b} remote ${a_addr} ${opts} || return 1
>  
>  	run_cmd ${ns_b} ip addr add ${tunnel4_b_addr}/${tunnel4_mask} dev ${type}_b
>  	run_cmd ${ns_b} ip addr add ${tunnel6_b_addr}/${tunnel6_mask} dev ${type}_b
>  
> +	run_cmd ip link set ${type}_a up
>  	run_cmd ${ns_b} ip link set ${type}_b up
>  }
>  
> @@ -880,8 +952,24 @@ setup_ovs_vxlan6() {
>  	setup_ovs_vxlan_or_geneve vxlan  ${prefix6}:${a_r1}::1 ${prefix6}:${b_r1}::1
>  }
>  
> +setup_ovs_br_internal() {
> +	run_cmd python3 ./openvswitch/ovs-dpctl.py add-dp ovs_br0 || \
> +		return 1
> +}
> +
> +setup_ovs_br_vswitchd() {
> +	run_cmd ovs-vsctl add-br ovs_br0 || return 1
> +}
> +
> +setup_ovs_add_if() {
> +	ifname="${1}"
> +	run_cmd python3 ./openvswitch/ovs-dpctl.py add-if ovs_br0 \
> +		"${ifname}" || \
> +		run_cmd ovs-vsctl add-port ovs_br0 "${ifname}"
> +}
> +
>  setup_ovs_bridge() {
> -	run_cmd ovs-vsctl add-br ovs_br0 || return $ksft_skip
> +	setup_ovs_br_internal || setup_ovs_br_vswitchd || return $ksft_skip
>  	run_cmd ip link set ovs_br0 up
>  
>  	run_cmd ${ns_c} ip link add veth_C-A type veth peer name veth_A-C
> @@ -891,7 +979,7 @@ setup_ovs_bridge() {
>  	run_cmd ${ns_c} ip link set veth_C-A up
>  	run_cmd ${ns_c} ip addr add ${veth4_c_addr}/${veth4_mask} dev veth_C-A
>  	run_cmd ${ns_c} ip addr add ${veth6_c_addr}/${veth6_mask} dev veth_C-A
> -	run_cmd ovs-vsctl add-port ovs_br0 veth_A-C
> +        setup_ovs_add_if veth_A-C

NIT: This should have been tab instead of space.  I will correct with v2.

>  	# Move veth_A-R1 to init
>  	run_cmd ${ns_a} ip link set veth_A-R1 netns 1
> @@ -922,6 +1010,18 @@ trace() {
>  	sleep 1
>  }
>  
> +cleanup_del_ovs_internal() {
> +	# squelch the output of the del-if commands since it can be wordy
> +	python3 ./openvswitch/ovs-dpctl.py del-if ovs_br0 -d true vxlan_a	>/dev/null	2>&1
> +	python3 ./openvswitch/ovs-dpctl.py del-if ovs_br0 -d true geneve_a	>/dev/null	2>&1
> +	python3 ./openvswitch/ovs-dpctl.py del-dp ovs_br0			>/dev/null	2>&1
> +}
> +
> +cleanup_del_ovs_vswitchd() {
> +	ovs-vsctl --if-exists del-port vxlan_a	2>/dev/null
> +	ovs-vsctl --if-exists del-br ovs_br0	2>/dev/null
> +}
> +
>  cleanup() {
>  	for pid in ${tcpdump_pids}; do
>  		kill ${pid}
> @@ -940,10 +1040,10 @@ cleanup() {
>  
>  	cleanup_all_ns
>  
> -	ip link del veth_A-C			2>/dev/null
> -	ip link del veth_A-R1			2>/dev/null
> -	ovs-vsctl --if-exists del-port vxlan_a	2>/dev/null
> -	ovs-vsctl --if-exists del-br ovs_br0	2>/dev/null
> +	ip link del veth_A-C		2>/dev/null
> +	ip link del veth_A-R1		2>/dev/null
> +	cleanup_del_ovs_internal
> +	cleanup_del_ovs_vswitchd
>  	rm -f "$tmpoutfile"
>  }
>  
> @@ -1397,6 +1497,12 @@ test_pmtu_ipvX_over_ovs_vxlanY_or_geneveY_exception() {
>  	outer_family=${3}
>  	ll_mtu=4000
>  
> +	if [ "${type}" = "vxlan" ]; then
> +		tun_a="vxlan_sys_4789"
> +	elif [ "${type}" = "geneve" ]; then
> +		tun_a="genev_sys_6081"
> +	fi
> +
>  	if [ ${outer_family} -eq 4 ]; then
>  		setup namespaces routing ovs_bridge ovs_${type}4 || return $ksft_skip
>  		#                      IPv4 header   UDP header   VXLAN/GENEVE header   Ethernet header
> @@ -1407,17 +1513,11 @@ test_pmtu_ipvX_over_ovs_vxlanY_or_geneveY_exception() {
>  		exp_mtu=$((${ll_mtu} - 40          - 8          - 8                   - 14))
>  	fi
>  
> -	if [ "${type}" = "vxlan" ]; then
> -		tun_a="vxlan_sys_4789"
> -	elif [ "${type}" = "geneve" ]; then
> -		tun_a="genev_sys_6081"
> -	fi
> -
> -	trace ""        "${tun_a}"  "${ns_b}"  ${type}_b \
> -	      ""        veth_A-R1   "${ns_r1}" veth_R1-A \
> -	      "${ns_b}" veth_B-R1   "${ns_r1}" veth_R1-B \
> -	      ""        ovs_br0     ""         veth-A-C  \
> -	      "${ns_c}" veth_C-A
> +	trace ""        ${type}_a    "${ns_b}"  ${type}_b \
> +	      ""        veth_A-R1    "${ns_r1}" veth_R1-A \
> +	      "${ns_b}" veth_B-R1    "${ns_r1}" veth_R1-B \
> +	      ""        ovs_br0      ""         veth-A_C  \
> +	      "${ns_c}" veth_C-A     ""         "${tun_a}"
>  
>  	if [ ${family} -eq 4 ]; then
>  		ping=ping
> @@ -1436,8 +1536,9 @@ test_pmtu_ipvX_over_ovs_vxlanY_or_geneveY_exception() {
>  	mtu "${ns_b}"  veth_B-R1 ${ll_mtu}
>  	mtu "${ns_r1}" veth_R1-B ${ll_mtu}
>  
> -	mtu ""        ${tun_a}  $((${ll_mtu} + 1000))
> -	mtu "${ns_b}" ${type}_b $((${ll_mtu} + 1000))
> +	mtu ""        ${tun_a}  $((${ll_mtu} + 1000)) 2>/dev/null || \
> +		mtu ""        ${type}_a  $((${ll_mtu} + 1000)) 2>/dev/null
> +	mtu "${ns_b}" ${type}_b  $((${ll_mtu} + 1000))
>  
>  	run_cmd ${ns_c} ${ping} -q -M want -i 0.1 -c 20 -s $((${ll_mtu} + 500)) ${dst} || return 1
diff mbox series

Patch

diff --git a/tools/testing/selftests/net/pmtu.sh b/tools/testing/selftests/net/pmtu.sh
index cfc84958025a..51ccb9bed069 100755
--- a/tools/testing/selftests/net/pmtu.sh
+++ b/tools/testing/selftests/net/pmtu.sh
@@ -842,25 +842,97 @@  setup_bridge() {
 	run_cmd ${ns_a} ip link set veth_A-C master br0
 }
 
+setup_ovs_via_internal_utility() {
+	type="${1}"
+	a_addr="${2}"
+	b_addr="${3}"
+	dport="${4}"
+
+	run_cmd python3 ./openvswitch/ovs-dpctl.py add-if ovs_br0 ${type}_a -t ${type} || return 1
+
+	ports=$(python3 ./openvswitch/ovs-dpctl.py show)
+	br0_port=$(echo "$ports" | grep -E "\sovs_br0" | sed -e 's@port @@' | cut -d: -f1 | xargs)
+	type_a_port=$(echo "$ports" | grep ${type}_a | sed -e 's@port @@' | cut -d: -f1 | xargs)
+	veth_a_port=$(echo "$ports" | grep veth_A | sed -e 's@port @@' | cut -d: -f1 | xargs)
+
+	v4_a_tun="${prefix4}.${a_r1}.1"
+	v4_b_tun="${prefix4}.${b_r1}.1"
+
+	v6_a_tun="${prefix6}:${a_r1}::1"
+	v6_b_tun="${prefix6}:${b_r1}::1"
+
+	if [ "${v4_a_tun}" = "${a_addr}" ]; then
+		run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \
+		    "recirc_id(0),in_port(${veth_a_port}),eth(),eth_type(0x0800),ipv4()" \
+		    "set(tunnel(tun_id=1,dst=${v4_b_tun},ttl=64,tp_dst=${dport},flags(df|csum))),${type_a_port}"
+		run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \
+		    "recirc_id(0),in_port(${veth_a_port}),eth(),eth_type(0x86dd),ipv6()" \
+		    "set(tunnel(tun_id=1,dst=${v4_b_tun},ttl=64,tp_dst=${dport},flags(df|csum))),${type_a_port}"
+		run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \
+		    "recirc_id(0),tunnel(tun_id=1,src=${v4_b_tun},dst=${v4_a_tun}),in_port(${type_a_port}),eth(),eth_type(0x0800),ipv4()" \
+		    "${veth_a_port}"
+		run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \
+		    "recirc_id(0),tunnel(tun_id=1,src=${v4_b_tun},dst=${v4_a_tun}),in_port(${type_a_port}),eth(),eth_type(0x86dd),ipv6()" \
+		    "${veth_a_port}"
+		run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \
+		    "recirc_id(0),tunnel(tun_id=1,src=${v4_b_tun},dst=${v4_a_tun}),in_port(${type_a_port}),eth(),eth_type(0x0806),arp()" \
+		    "${veth_a_port}"
+		run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \
+		    "recirc_id(0),in_port(${veth_a_port}),eth(),eth_type(0x0806),arp(sip=${veth4_c_addr},tip=${tunnel4_b_addr})" \
+		    "set(tunnel(tun_id=1,dst=${v4_b_tun},ttl=64,tp_dst=${dport},flags(df|csum))),${type_a_port}"
+	else
+		run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \
+		    "recirc_id(0),in_port(${veth_a_port}),eth(),eth_type(0x0800),ipv4()" \
+		    "set(tunnel(tun_id=1,ipv6_dst=${v6_b_tun},ttl=64,tp_dst=${dport},flags(df|csum))),${type_a_port}"
+		run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \
+		    "recirc_id(0),in_port(${veth_a_port}),eth(),eth_type(0x86dd),ipv6()" \
+		    "set(tunnel(tun_id=1,ipv6_dst=${v6_b_tun},ttl=64,tp_dst=${dport},flags(df|csum))),${type_a_port}"
+		run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \
+		    "recirc_id(0),tunnel(tun_id=1,ipv6_src=${v6_b_tun},ipv6_dst=${v6_a_tun}),in_port(${type_a_port}),eth(),eth_type(0x0800),ipv4()" \
+		    "${veth_a_port}"
+		run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \
+		    "recirc_id(0),tunnel(tun_id=1,ipv6_src=${v6_b_tun},ipv6_dst=${v6_a_tun}),in_port(${type_a_port}),eth(),eth_type(0x86dd),ipv6()" \
+		    "${veth_a_port}"
+		run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \
+		    "recirc_id(0),tunnel(tun_id=1,ipv6_src=${v6_b_tun},ipv6_dst=${v6_a_tun}),in_port(${type_a_port}),eth(),eth_type(0x0806),arp()" \
+		    "${veth_a_port}"
+		run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \
+		    "recirc_id(0),in_port(${veth_a_port}),eth(),eth_type(0x0806),arp(sip=${veth4_c_addr},tip=${tunnel4_b_addr})" \
+		    "set(tunnel(tun_id=1,ipv6_dst=${v6_b_tun},ttl=64,tp_dst=${dport},flags(df|csum))),${type_a_port}"
+	fi
+}
+
+setup_ovs_via_vswitchd() {
+	type="${1}"
+	b_addr="${2}"
+
+	run_cmd ovs-vsctl add-port ovs_br0 ${type}_a -- \
+		set interface ${type}_a type=${type} \
+		options:remote_ip=${b_addr} options:key=1 options:csum=true || return 1
+}
+
 setup_ovs_vxlan_or_geneve() {
 	type="${1}"
 	a_addr="${2}"
 	b_addr="${3}"
+	dport="6081"
 
 	if [ "${type}" = "vxlan" ]; then
+		dport="4789"
 		opts="${opts} ttl 64 dstport 4789"
 		opts_b="local ${b_addr}"
 	fi
 
-	run_cmd ovs-vsctl add-port ovs_br0 ${type}_a -- \
-		set interface ${type}_a type=${type} \
-		options:remote_ip=${b_addr} options:key=1 options:csum=true || return 1
+	setup_ovs_via_internal_utility "${type}" "${a_addr}" "${b_addr}" \
+				       "${dport}" || \
+	    setup_ovs_via_vswitchd "${type}" "${b_addr}" || return 1
 
 	run_cmd ${ns_b} ip link add ${type}_b type ${type} id 1 ${opts_b} remote ${a_addr} ${opts} || return 1
 
 	run_cmd ${ns_b} ip addr add ${tunnel4_b_addr}/${tunnel4_mask} dev ${type}_b
 	run_cmd ${ns_b} ip addr add ${tunnel6_b_addr}/${tunnel6_mask} dev ${type}_b
 
+	run_cmd ip link set ${type}_a up
 	run_cmd ${ns_b} ip link set ${type}_b up
 }
 
@@ -880,8 +952,24 @@  setup_ovs_vxlan6() {
 	setup_ovs_vxlan_or_geneve vxlan  ${prefix6}:${a_r1}::1 ${prefix6}:${b_r1}::1
 }
 
+setup_ovs_br_internal() {
+	run_cmd python3 ./openvswitch/ovs-dpctl.py add-dp ovs_br0 || \
+		return 1
+}
+
+setup_ovs_br_vswitchd() {
+	run_cmd ovs-vsctl add-br ovs_br0 || return 1
+}
+
+setup_ovs_add_if() {
+	ifname="${1}"
+	run_cmd python3 ./openvswitch/ovs-dpctl.py add-if ovs_br0 \
+		"${ifname}" || \
+		run_cmd ovs-vsctl add-port ovs_br0 "${ifname}"
+}
+
 setup_ovs_bridge() {
-	run_cmd ovs-vsctl add-br ovs_br0 || return $ksft_skip
+	setup_ovs_br_internal || setup_ovs_br_vswitchd || return $ksft_skip
 	run_cmd ip link set ovs_br0 up
 
 	run_cmd ${ns_c} ip link add veth_C-A type veth peer name veth_A-C
@@ -891,7 +979,7 @@  setup_ovs_bridge() {
 	run_cmd ${ns_c} ip link set veth_C-A up
 	run_cmd ${ns_c} ip addr add ${veth4_c_addr}/${veth4_mask} dev veth_C-A
 	run_cmd ${ns_c} ip addr add ${veth6_c_addr}/${veth6_mask} dev veth_C-A
-	run_cmd ovs-vsctl add-port ovs_br0 veth_A-C
+        setup_ovs_add_if veth_A-C
 
 	# Move veth_A-R1 to init
 	run_cmd ${ns_a} ip link set veth_A-R1 netns 1
@@ -922,6 +1010,18 @@  trace() {
 	sleep 1
 }
 
+cleanup_del_ovs_internal() {
+	# squelch the output of the del-if commands since it can be wordy
+	python3 ./openvswitch/ovs-dpctl.py del-if ovs_br0 -d true vxlan_a	>/dev/null	2>&1
+	python3 ./openvswitch/ovs-dpctl.py del-if ovs_br0 -d true geneve_a	>/dev/null	2>&1
+	python3 ./openvswitch/ovs-dpctl.py del-dp ovs_br0			>/dev/null	2>&1
+}
+
+cleanup_del_ovs_vswitchd() {
+	ovs-vsctl --if-exists del-port vxlan_a	2>/dev/null
+	ovs-vsctl --if-exists del-br ovs_br0	2>/dev/null
+}
+
 cleanup() {
 	for pid in ${tcpdump_pids}; do
 		kill ${pid}
@@ -940,10 +1040,10 @@  cleanup() {
 
 	cleanup_all_ns
 
-	ip link del veth_A-C			2>/dev/null
-	ip link del veth_A-R1			2>/dev/null
-	ovs-vsctl --if-exists del-port vxlan_a	2>/dev/null
-	ovs-vsctl --if-exists del-br ovs_br0	2>/dev/null
+	ip link del veth_A-C		2>/dev/null
+	ip link del veth_A-R1		2>/dev/null
+	cleanup_del_ovs_internal
+	cleanup_del_ovs_vswitchd
 	rm -f "$tmpoutfile"
 }
 
@@ -1397,6 +1497,12 @@  test_pmtu_ipvX_over_ovs_vxlanY_or_geneveY_exception() {
 	outer_family=${3}
 	ll_mtu=4000
 
+	if [ "${type}" = "vxlan" ]; then
+		tun_a="vxlan_sys_4789"
+	elif [ "${type}" = "geneve" ]; then
+		tun_a="genev_sys_6081"
+	fi
+
 	if [ ${outer_family} -eq 4 ]; then
 		setup namespaces routing ovs_bridge ovs_${type}4 || return $ksft_skip
 		#                      IPv4 header   UDP header   VXLAN/GENEVE header   Ethernet header
@@ -1407,17 +1513,11 @@  test_pmtu_ipvX_over_ovs_vxlanY_or_geneveY_exception() {
 		exp_mtu=$((${ll_mtu} - 40          - 8          - 8                   - 14))
 	fi
 
-	if [ "${type}" = "vxlan" ]; then
-		tun_a="vxlan_sys_4789"
-	elif [ "${type}" = "geneve" ]; then
-		tun_a="genev_sys_6081"
-	fi
-
-	trace ""        "${tun_a}"  "${ns_b}"  ${type}_b \
-	      ""        veth_A-R1   "${ns_r1}" veth_R1-A \
-	      "${ns_b}" veth_B-R1   "${ns_r1}" veth_R1-B \
-	      ""        ovs_br0     ""         veth-A-C  \
-	      "${ns_c}" veth_C-A
+	trace ""        ${type}_a    "${ns_b}"  ${type}_b \
+	      ""        veth_A-R1    "${ns_r1}" veth_R1-A \
+	      "${ns_b}" veth_B-R1    "${ns_r1}" veth_R1-B \
+	      ""        ovs_br0      ""         veth-A_C  \
+	      "${ns_c}" veth_C-A     ""         "${tun_a}"
 
 	if [ ${family} -eq 4 ]; then
 		ping=ping
@@ -1436,8 +1536,9 @@  test_pmtu_ipvX_over_ovs_vxlanY_or_geneveY_exception() {
 	mtu "${ns_b}"  veth_B-R1 ${ll_mtu}
 	mtu "${ns_r1}" veth_R1-B ${ll_mtu}
 
-	mtu ""        ${tun_a}  $((${ll_mtu} + 1000))
-	mtu "${ns_b}" ${type}_b $((${ll_mtu} + 1000))
+	mtu ""        ${tun_a}  $((${ll_mtu} + 1000)) 2>/dev/null || \
+		mtu ""        ${type}_a  $((${ll_mtu} + 1000)) 2>/dev/null
+	mtu "${ns_b}" ${type}_b  $((${ll_mtu} + 1000))
 
 	run_cmd ${ns_c} ${ping} -q -M want -i 0.1 -c 20 -s $((${ll_mtu} + 500)) ${dst} || return 1