@@ -994,7 +994,7 @@ static bool rzg2l_ds_is_supported(struct rzg2l_pinctrl *pctrl, u32 caps,
return false;
}
-static bool rzg2l_oen_is_supported(u32 caps, u8 pin, u8 max_pin)
+static bool rzg3s_oen_is_supported(u32 caps, u8 pin, u8 max_pin)
{
if (!(caps & PIN_CFG_OEN))
return false;
@@ -1005,7 +1005,7 @@ static bool rzg2l_oen_is_supported(u32 caps, u8 pin, u8 max_pin)
return true;
}
-static u8 rzg2l_pin_to_oen_bit(u32 offset, u8 pin, u8 max_port)
+static u8 rzg3s_pin_to_oen_bit(u32 offset, u8 pin, u8 max_port)
{
if (pin)
pin *= 2;
@@ -1016,31 +1016,31 @@ static u8 rzg2l_pin_to_oen_bit(u32 offset, u8 pin, u8 max_port)
return pin;
}
-static u32 rzg2l_read_oen(struct rzg2l_pinctrl *pctrl, u32 caps, u32 offset, u8 pin)
+static u32 rzg3s_read_oen(struct rzg2l_pinctrl *pctrl, u32 caps, u32 offset, u8 pin)
{
u8 max_port = pctrl->data->hwcfg->oen_max_port;
u8 max_pin = pctrl->data->hwcfg->oen_max_pin;
u8 bit;
- if (!rzg2l_oen_is_supported(caps, pin, max_pin))
+ if (!rzg3s_oen_is_supported(caps, pin, max_pin))
return 0;
- bit = rzg2l_pin_to_oen_bit(offset, pin, max_port);
+ bit = rzg3s_pin_to_oen_bit(offset, pin, max_port);
return !(readb(pctrl->base + ETH_MODE) & BIT(bit));
}
-static int rzg2l_write_oen(struct rzg2l_pinctrl *pctrl, u32 caps, u32 offset, u8 pin, u8 oen)
+static int rzg3s_write_oen(struct rzg2l_pinctrl *pctrl, u32 caps, u32 offset, u8 pin, u8 oen)
{
u8 max_port = pctrl->data->hwcfg->oen_max_port;
u8 max_pin = pctrl->data->hwcfg->oen_max_pin;
unsigned long flags;
u8 val, bit;
- if (!rzg2l_oen_is_supported(caps, pin, max_pin))
+ if (!rzg3s_oen_is_supported(caps, pin, max_pin))
return -EINVAL;
- bit = rzg2l_pin_to_oen_bit(offset, pin, max_port);
+ bit = rzg3s_pin_to_oen_bit(offset, pin, max_port);
spin_lock_irqsave(&pctrl->lock, flags);
val = readb(pctrl->base + ETH_MODE);
@@ -1215,6 +1215,8 @@ static int rzg2l_pinctrl_pinconf_get(struct pinctrl_dev *pctldev,
break;
case PIN_CONFIG_OUTPUT_ENABLE:
+ if (!pctrl->data->oen_read)
+ return -EOPNOTSUPP;
arg = pctrl->data->oen_read(pctrl, cfg, _pin, bit);
if (!arg)
return -EINVAL;
@@ -1354,6 +1356,8 @@ static int rzg2l_pinctrl_pinconf_set(struct pinctrl_dev *pctldev,
case PIN_CONFIG_OUTPUT_ENABLE:
arg = pinconf_to_config_argument(_configs[i]);
+ if (!pctrl->data->oen_write)
+ return -EOPNOTSUPP;
ret = pctrl->data->oen_write(pctrl, cfg, _pin, bit, !!arg);
if (ret)
return ret;
@@ -3065,8 +3069,6 @@ static struct rzg2l_pinctrl_data r9a07g043_data = {
#endif
.pwpr_pfc_lock_unlock = &rzg2l_pwpr_pfc_lock_unlock,
.pmc_writeb = &rzg2l_pmc_writeb,
- .oen_read = &rzg2l_read_oen,
- .oen_write = &rzg2l_write_oen,
.hw_to_bias_param = &rzg2l_hw_to_bias_param,
.bias_param_to_hw = &rzg2l_bias_param_to_hw,
};
@@ -3082,8 +3084,6 @@ static struct rzg2l_pinctrl_data r9a07g044_data = {
.hwcfg = &rzg2l_hwcfg,
.pwpr_pfc_lock_unlock = &rzg2l_pwpr_pfc_lock_unlock,
.pmc_writeb = &rzg2l_pmc_writeb,
- .oen_read = &rzg2l_read_oen,
- .oen_write = &rzg2l_write_oen,
.hw_to_bias_param = &rzg2l_hw_to_bias_param,
.bias_param_to_hw = &rzg2l_bias_param_to_hw,
};
@@ -3098,8 +3098,8 @@ static struct rzg2l_pinctrl_data r9a08g045_data = {
.hwcfg = &rzg3s_hwcfg,
.pwpr_pfc_lock_unlock = &rzg2l_pwpr_pfc_lock_unlock,
.pmc_writeb = &rzg2l_pmc_writeb,
- .oen_read = &rzg2l_read_oen,
- .oen_write = &rzg2l_write_oen,
+ .oen_read = &rzg3s_read_oen,
+ .oen_write = &rzg3s_write_oen,
.hw_to_bias_param = &rzg2l_hw_to_bias_param,
.bias_param_to_hw = &rzg2l_bias_param_to_hw,
};
We currently support OEN read/write for the RZ/G3S SoC but not the RZ/G2L SoC family (consisting of RZ/G2L, RZ/G2LC, RZ/G2UL, RZ/V2L & RZ/Five). The appropriate functions are renamed to clarify this. We should also only set the oen_read and oen_write function pointers for the devices which support these operations. This requires us to check that these function pointers are valid before calling them. Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com> --- Changes v1->v2: * New patch to clarify function names. drivers/pinctrl/renesas/pinctrl-rzg2l.c | 28 ++++++++++++------------- 1 file changed, 14 insertions(+), 14 deletions(-)