| Message ID | 20221016234335.904212-1-aidanmacdonald.0x0@gmail.com |
|---|---|
| Headers | show |
| Series | Add support for AXP192 PMIC | expand |
On Mon, 17 Oct 2022 00:43:22 +0100 Aidan MacDonald <aidanmacdonald.0x0@gmail.com> wrote: > This series adds support for the AXP192 PMIC to the AXP20x MFD driver > framework, including support for regulators, ADCs, and AC/USB/battery > power supplies. > > v6 is a resend of v5 from July -- the patches haven't changed at all > but I've rebased them on the latest git master branch. Hi Aidan, Lee has recently expressed that he keen to take as much of these sorts of series as possible via the various subsystem trees. As such, it is useful to call out in the cover letter of such a series if this can be done. For example, patch 9 (last IIO one) can't be applied without defines in patch 6 (I think). Thus I'm assuming Lee will do an immutable branch with at least those patches on it. Perhaps worth expressing if that is also the case for the power and regulator subsystem patches? Thanks, Jonathan > > Aidan MacDonald (13): > dt-bindings: mfd: add bindings for AXP192 MFD device > dt-bindings: iio: adc: axp209: Add AXP192 compatible > dt-bindings: power: supply: axp20x: Add AXP192 compatible > dt-bindings: power: axp20x-battery: Add AXP192 compatible > mfd: axp20x: Add support for AXP192 > regulator: axp20x: Add support for AXP192 > iio: adc: axp20x_adc: Minor code cleanups > iio: adc: axp20x_adc: Replace adc_en2 flag with adc_en2_mask field > iio: adc: axp20x_adc: Add support for AXP192 > power: supply: axp20x_usb_power: Add support for AXP192 > power: axp20x_battery: Add constant charge current table > power: axp20x_battery: Support battery status without fuel gauge > power: axp20x_battery: Add support for AXP192 > > .../bindings/iio/adc/x-powers,axp209-adc.yaml | 18 + > .../bindings/mfd/x-powers,axp152.yaml | 1 + > .../x-powers,axp20x-battery-power-supply.yaml | 1 + > .../x-powers,axp20x-usb-power-supply.yaml | 1 + > drivers/iio/adc/axp20x_adc.c | 356 ++++++++++++++++-- > drivers/mfd/axp20x-i2c.c | 2 + > drivers/mfd/axp20x.c | 141 +++++++ > drivers/power/supply/axp20x_battery.c | 142 ++++++- > drivers/power/supply/axp20x_usb_power.c | 84 ++++- > drivers/regulator/axp20x-regulator.c | 100 ++++- > include/linux/mfd/axp20x.h | 84 +++++ > 11 files changed, 856 insertions(+), 74 deletions(-) >
Jonathan Cameron <jic23@kernel.org> writes: > On Mon, 17 Oct 2022 00:43:22 +0100 > Aidan MacDonald <aidanmacdonald.0x0@gmail.com> wrote: > >> This series adds support for the AXP192 PMIC to the AXP20x MFD driver >> framework, including support for regulators, ADCs, and AC/USB/battery >> power supplies. >> >> v6 is a resend of v5 from July -- the patches haven't changed at all >> but I've rebased them on the latest git master branch. > > Hi Aidan, > > Lee has recently expressed that he keen to take as much of these sorts > of series as possible via the various subsystem trees. > > As such, it is useful to call out in the cover letter of such a series > if this can be done. For example, patch 9 (last IIO one) can't be > applied without defines in patch 6 (I think). Thus I'm assuming Lee > will do an immutable branch with at least those patches on it. > > Perhaps worth expressing if that is also the case for the power > and regulator subsystem patches? > > Thanks, > > Jonathan Yep, the IIO, regulator, and power subsystem patches all depend on the MFD patch. Specifically, patches 6, 9, and 10 depend on patch 5. I can't get rid of this dependency because the variant ID (AXP192_ID) has to be defined centrally in the MFD patch. The axp20x_battery patches (last three of the whole series) don't depend on the variant ID or other defines, so they could be taken independently through the power subsystem. Even though the IIO cleanups (7 and 8) don't depend on anything else I imagine it'd cause problems to take those via IIO because patch 9 depends on them. IOW: Lee probably needs to take patches 5-10. - Aidan >> >> Aidan MacDonald (13): >> dt-bindings: mfd: add bindings for AXP192 MFD device >> dt-bindings: iio: adc: axp209: Add AXP192 compatible >> dt-bindings: power: supply: axp20x: Add AXP192 compatible >> dt-bindings: power: axp20x-battery: Add AXP192 compatible >> mfd: axp20x: Add support for AXP192 >> regulator: axp20x: Add support for AXP192 >> iio: adc: axp20x_adc: Minor code cleanups >> iio: adc: axp20x_adc: Replace adc_en2 flag with adc_en2_mask field >> iio: adc: axp20x_adc: Add support for AXP192 >> power: supply: axp20x_usb_power: Add support for AXP192 >> power: axp20x_battery: Add constant charge current table >> power: axp20x_battery: Support battery status without fuel gauge >> power: axp20x_battery: Add support for AXP192 >> >> .../bindings/iio/adc/x-powers,axp209-adc.yaml | 18 + >> .../bindings/mfd/x-powers,axp152.yaml | 1 + >> .../x-powers,axp20x-battery-power-supply.yaml | 1 + >> .../x-powers,axp20x-usb-power-supply.yaml | 1 + >> drivers/iio/adc/axp20x_adc.c | 356 ++++++++++++++++-- >> drivers/mfd/axp20x-i2c.c | 2 + >> drivers/mfd/axp20x.c | 141 +++++++ >> drivers/power/supply/axp20x_battery.c | 142 ++++++- >> drivers/power/supply/axp20x_usb_power.c | 84 ++++- >> drivers/regulator/axp20x-regulator.c | 100 ++++- >> include/linux/mfd/axp20x.h | 84 +++++ >> 11 files changed, 856 insertions(+), 74 deletions(-) >>
On Tue, Oct 18, 2022 at 2:06 AM Aidan MacDonald <aidanmacdonald.0x0@gmail.com> wrote: > Jonathan Cameron <jic23@kernel.org> writes: > > On Mon, 17 Oct 2022 00:43:22 +0100 > > Aidan MacDonald <aidanmacdonald.0x0@gmail.com> wrote: ... > > Lee has recently expressed that he keen to take as much of these sorts > > of series as possible via the various subsystem trees. > > > > As such, it is useful to call out in the cover letter of such a series > > if this can be done. For example, patch 9 (last IIO one) can't be > > applied without defines in patch 6 (I think). Thus I'm assuming Lee > > will do an immutable branch with at least those patches on it. > > > > Perhaps worth expressing if that is also the case for the power > > and regulator subsystem patches? > Yep, the IIO, regulator, and power subsystem patches all depend on > the MFD patch. There are two types of dependencies: compile and functional. > Specifically, patches 6, 9, and 10 depend on patch 5. > I can't get rid of this dependency because the variant ID (AXP192_ID) > has to be defined centrally in the MFD patch. It's not clear which one you are talking about. If it's functional, then each driver can be taken separately via each concerned subsystem. > The axp20x_battery patches (last three of the whole series) don't > depend on the variant ID or other defines, so they could be taken > independently through the power subsystem. > > Even though the IIO cleanups (7 and 8) don't depend on anything else > I imagine it'd cause problems to take those via IIO because patch 9 > depends on them. > > IOW: Lee probably needs to take patches 5-10.
Andy Shevchenko <andy.shevchenko@gmail.com> writes: > On Tue, Oct 18, 2022 at 2:06 AM Aidan MacDonald > <aidanmacdonald.0x0@gmail.com> wrote: >> Jonathan Cameron <jic23@kernel.org> writes: >> > On Mon, 17 Oct 2022 00:43:22 +0100 >> > Aidan MacDonald <aidanmacdonald.0x0@gmail.com> wrote: > > ... > >> > Lee has recently expressed that he keen to take as much of these sorts >> > of series as possible via the various subsystem trees. >> > >> > As such, it is useful to call out in the cover letter of such a series >> > if this can be done. For example, patch 9 (last IIO one) can't be >> > applied without defines in patch 6 (I think). Thus I'm assuming Lee >> > will do an immutable branch with at least those patches on it. >> > >> > Perhaps worth expressing if that is also the case for the power >> > and regulator subsystem patches? > >> Yep, the IIO, regulator, and power subsystem patches all depend on >> the MFD patch. > > There are two types of dependencies: compile and functional. > >> Specifically, patches 6, 9, and 10 depend on patch 5. >> I can't get rid of this dependency because the variant ID (AXP192_ID) >> has to be defined centrally in the MFD patch. > > It's not clear which one you are talking about. If it's functional, > then each driver can be taken separately via each concerned subsystem. Johnathan was talking about compile dependencies -- the defines he's mentioning -- so what I mean is compile dependencies. Patches 6/9/10 do not compile unless they are applied after patch 5, because of a new enumerator AXP192_ID defined in patch 5. Regards, Aidan
Hi Aidan, Am 17.10.22 um 01:43 schrieb Aidan MacDonald: > This series adds support for the AXP192 PMIC to the AXP20x MFD driver > framework, including support for regulators, ADCs, and AC/USB/battery > power supplies. > > v6 is a resend of v5 from July -- the patches haven't changed at all > but I've rebased them on the latest git master branch. I'm not entirely sure if I've found the latest version of the patches - at least b4 didn't find a newer. It looks a lot like only mfd and usb-power patches have been applied for some reason. Are you planing to resend the other ones? Regards, Alex > Aidan MacDonald (13): > dt-bindings: mfd: add bindings for AXP192 MFD device > dt-bindings: iio: adc: axp209: Add AXP192 compatible > dt-bindings: power: supply: axp20x: Add AXP192 compatible > dt-bindings: power: axp20x-battery: Add AXP192 compatible > mfd: axp20x: Add support for AXP192 > regulator: axp20x: Add support for AXP192 > iio: adc: axp20x_adc: Minor code cleanups > iio: adc: axp20x_adc: Replace adc_en2 flag with adc_en2_mask field > iio: adc: axp20x_adc: Add support for AXP192 > power: supply: axp20x_usb_power: Add support for AXP192 > power: axp20x_battery: Add constant charge current table > power: axp20x_battery: Support battery status without fuel gauge > power: axp20x_battery: Add support for AXP192 > > .../bindings/iio/adc/x-powers,axp209-adc.yaml | 18 + > .../bindings/mfd/x-powers,axp152.yaml | 1 + > .../x-powers,axp20x-battery-power-supply.yaml | 1 + > .../x-powers,axp20x-usb-power-supply.yaml | 1 + > drivers/iio/adc/axp20x_adc.c | 356 ++++++++++++++++-- > drivers/mfd/axp20x-i2c.c | 2 + > drivers/mfd/axp20x.c | 141 +++++++ > drivers/power/supply/axp20x_battery.c | 142 ++++++- > drivers/power/supply/axp20x_usb_power.c | 84 ++++- > drivers/regulator/axp20x-regulator.c | 100 ++++- > include/linux/mfd/axp20x.h | 84 +++++ > 11 files changed, 856 insertions(+), 74 deletions(-) >
On Fri, 7 Jun 2024 17:12:51 +0200 Alex Bee <knaerzche@gmail.com> wrote: > Hi Aidan, > > Am 17.10.22 um 01:43 schrieb Aidan MacDonald: > > This series adds support for the AXP192 PMIC to the AXP20x MFD driver > > framework, including support for regulators, ADCs, and AC/USB/battery > > power supplies. > > > > v6 is a resend of v5 from July -- the patches haven't changed at all > > but I've rebased them on the latest git master branch. > I'm not entirely sure if I've found the latest version of the patches - at > least b4 didn't find a newer. It looks a lot like only mfd and usb-power > patches have been applied for some reason. Are you planing to resend the > other ones? This was delayed originally by a dependency on a header in mfd and that is obviously resolved now. I think everyone was expecting a resend of the series or for Lee to pick up the dependent ones and so we all stopped tracking it. Anyhow, I had the two IIO cleanups already, but I've now picked up the 3rd patch (where the dependency was) as well. Thanks, Jonathan > > Regards, > Alex > > > Aidan MacDonald (13): > > dt-bindings: mfd: add bindings for AXP192 MFD device > > dt-bindings: iio: adc: axp209: Add AXP192 compatible > > dt-bindings: power: supply: axp20x: Add AXP192 compatible > > dt-bindings: power: axp20x-battery: Add AXP192 compatible > > mfd: axp20x: Add support for AXP192 > > regulator: axp20x: Add support for AXP192 > > iio: adc: axp20x_adc: Minor code cleanups > > iio: adc: axp20x_adc: Replace adc_en2 flag with adc_en2_mask field > > iio: adc: axp20x_adc: Add support for AXP192 > > power: supply: axp20x_usb_power: Add support for AXP192 > > power: axp20x_battery: Add constant charge current table > > power: axp20x_battery: Support battery status without fuel gauge > > power: axp20x_battery: Add support for AXP192 > > > > .../bindings/iio/adc/x-powers,axp209-adc.yaml | 18 + > > .../bindings/mfd/x-powers,axp152.yaml | 1 + > > .../x-powers,axp20x-battery-power-supply.yaml | 1 + > > .../x-powers,axp20x-usb-power-supply.yaml | 1 + > > drivers/iio/adc/axp20x_adc.c | 356 ++++++++++++++++-- > > drivers/mfd/axp20x-i2c.c | 2 + > > drivers/mfd/axp20x.c | 141 +++++++ > > drivers/power/supply/axp20x_battery.c | 142 ++++++- > > drivers/power/supply/axp20x_usb_power.c | 84 ++++- > > drivers/regulator/axp20x-regulator.c | 100 ++++- > > include/linux/mfd/axp20x.h | 84 +++++ > > 11 files changed, 856 insertions(+), 74 deletions(-) > >