diff mbox series

[2/2] leds: rgb: leds-qcom-lpg: Fix line wrapping style issues

Message ID 20240607005250.4047135-2-quic_amelende@quicinc.com
State New
Headers show
Series [1/2] leds: rgb: leds-qcom-lpg: Add PPG check for setting/clearing PBS triggers | expand

Commit Message

Anjelique Melendez June 7, 2024, 12:52 a.m. UTC 
Fix line wrapping style issues introduced in previous patches.

Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
---
 drivers/leds/rgb/leds-qcom-lpg.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

Comments

Dmitry Baryshkov June 7, 2024, 11:55 a.m. UTC | #1 
On Thu, Jun 06, 2024 at 05:52:52PM -0700, Anjelique Melendez wrote:
> Fix line wrapping style issues introduced in previous patches.

I'd say this reduces readability of the patch.

> 
> Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
> ---
>  drivers/leds/rgb/leds-qcom-lpg.c | 19 +++++++++++++------
>  1 file changed, 13 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/leds/rgb/leds-qcom-lpg.c b/drivers/leds/rgb/leds-qcom-lpg.c
> index e74b2ceed1c2..7c35b3ba09a3 100644
> --- a/drivers/leds/rgb/leds-qcom-lpg.c
> +++ b/drivers/leds/rgb/leds-qcom-lpg.c
> @@ -620,6 +620,7 @@ static void lpg_sdam_apply_lut_control(struct lpg_channel *chan)
>  	u8 val = 0, conf = 0, lut_offset = 0;
>  	unsigned int hi_pause, lo_pause;
>  	struct lpg *lpg = chan->lpg;
> +	u16 addr;
>  
>  	if (!chan->ramp_enabled || chan->pattern_lo_idx == chan->pattern_hi_idx)
>  		return;
> @@ -640,17 +641,23 @@ static void lpg_sdam_apply_lut_control(struct lpg_channel *chan)
>  		lo_idx += lut_offset;
>  	}
>  
> -	nvmem_device_write(lpg_chan_sdam, SDAM_PBS_SCRATCH_LUT_COUNTER_OFFSET + chan->sdam_offset, 1, &val);
> -	nvmem_device_write(lpg_chan_sdam, SDAM_PATTERN_CONFIG_OFFSET + chan->sdam_offset, 1, &conf);
> -	nvmem_device_write(lpg_chan_sdam, SDAM_END_INDEX_OFFSET + chan->sdam_offset, 1, &hi_idx);
> -	nvmem_device_write(lpg_chan_sdam, SDAM_START_INDEX_OFFSET + chan->sdam_offset, 1, &lo_idx);
> +	addr = SDAM_PBS_SCRATCH_LUT_COUNTER_OFFSET + chan->sdam_offset;
> +	nvmem_device_write(lpg_chan_sdam, addr, 1, &val);
> +	addr = SDAM_PATTERN_CONFIG_OFFSET + chan->sdam_offset;
> +	nvmem_device_write(lpg_chan_sdam, addr, 1, &conf);
> +	addr = SDAM_END_INDEX_OFFSET + chan->sdam_offset;
> +	nvmem_device_write(lpg_chan_sdam, addr, 1, &hi_idx);
> +	addr = SDAM_START_INDEX_OFFSET + chan->sdam_offset;
> +	nvmem_device_write(lpg_chan_sdam, addr, 1, &lo_idx);
>  
>  	val = RAMP_STEP_DURATION(chan->ramp_tick_ms);
>  	nvmem_device_write(lpg_chan_sdam, SDAM_REG_RAMP_STEP_DURATION, 1, &val);
>  
>  	if (lpg->lut_sdam) {
> -		nvmem_device_write(lpg_chan_sdam, SDAM_PAUSE_HI_MULTIPLIER_OFFSET + chan->sdam_offset, 1, &hi_pause);
> -		nvmem_device_write(lpg_chan_sdam, SDAM_PAUSE_LO_MULTIPLIER_OFFSET + chan->sdam_offset, 1, &lo_pause);
> +		addr = SDAM_PAUSE_HI_MULTIPLIER_OFFSET + chan->sdam_offset;
> +		nvmem_device_write(lpg_chan_sdam, addr, 1, &hi_pause);
> +		addr = SDAM_PAUSE_LO_MULTIPLIER_OFFSET + chan->sdam_offset;
> +		nvmem_device_write(lpg_chan_sdam, addr, 1, &lo_pause);
>  	}
>  
>  }
> -- 
> 2.34.1
>
Bjorn Andersson June 7, 2024, 6:56 p.m. UTC | #2 
On Thu, Jun 06, 2024 at 05:52:52PM GMT, Anjelique Melendez wrote:
> Fix line wrapping style issues introduced in previous patches.

Bending the line length guidelines is okay when it results in easier to
read code. I find the existing code easier to read...

Regards,
Bjorn

> 
> Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
> ---
>  drivers/leds/rgb/leds-qcom-lpg.c | 19 +++++++++++++------
>  1 file changed, 13 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/leds/rgb/leds-qcom-lpg.c b/drivers/leds/rgb/leds-qcom-lpg.c
> index e74b2ceed1c2..7c35b3ba09a3 100644
> --- a/drivers/leds/rgb/leds-qcom-lpg.c
> +++ b/drivers/leds/rgb/leds-qcom-lpg.c
> @@ -620,6 +620,7 @@ static void lpg_sdam_apply_lut_control(struct lpg_channel *chan)
>  	u8 val = 0, conf = 0, lut_offset = 0;
>  	unsigned int hi_pause, lo_pause;
>  	struct lpg *lpg = chan->lpg;
> +	u16 addr;
>  
>  	if (!chan->ramp_enabled || chan->pattern_lo_idx == chan->pattern_hi_idx)
>  		return;
> @@ -640,17 +641,23 @@ static void lpg_sdam_apply_lut_control(struct lpg_channel *chan)
>  		lo_idx += lut_offset;
>  	}
>  
> -	nvmem_device_write(lpg_chan_sdam, SDAM_PBS_SCRATCH_LUT_COUNTER_OFFSET + chan->sdam_offset, 1, &val);
> -	nvmem_device_write(lpg_chan_sdam, SDAM_PATTERN_CONFIG_OFFSET + chan->sdam_offset, 1, &conf);
> -	nvmem_device_write(lpg_chan_sdam, SDAM_END_INDEX_OFFSET + chan->sdam_offset, 1, &hi_idx);
> -	nvmem_device_write(lpg_chan_sdam, SDAM_START_INDEX_OFFSET + chan->sdam_offset, 1, &lo_idx);
> +	addr = SDAM_PBS_SCRATCH_LUT_COUNTER_OFFSET + chan->sdam_offset;
> +	nvmem_device_write(lpg_chan_sdam, addr, 1, &val);
> +	addr = SDAM_PATTERN_CONFIG_OFFSET + chan->sdam_offset;
> +	nvmem_device_write(lpg_chan_sdam, addr, 1, &conf);
> +	addr = SDAM_END_INDEX_OFFSET + chan->sdam_offset;
> +	nvmem_device_write(lpg_chan_sdam, addr, 1, &hi_idx);
> +	addr = SDAM_START_INDEX_OFFSET + chan->sdam_offset;
> +	nvmem_device_write(lpg_chan_sdam, addr, 1, &lo_idx);
>  
>  	val = RAMP_STEP_DURATION(chan->ramp_tick_ms);
>  	nvmem_device_write(lpg_chan_sdam, SDAM_REG_RAMP_STEP_DURATION, 1, &val);
>  
>  	if (lpg->lut_sdam) {
> -		nvmem_device_write(lpg_chan_sdam, SDAM_PAUSE_HI_MULTIPLIER_OFFSET + chan->sdam_offset, 1, &hi_pause);
> -		nvmem_device_write(lpg_chan_sdam, SDAM_PAUSE_LO_MULTIPLIER_OFFSET + chan->sdam_offset, 1, &lo_pause);
> +		addr = SDAM_PAUSE_HI_MULTIPLIER_OFFSET + chan->sdam_offset;
> +		nvmem_device_write(lpg_chan_sdam, addr, 1, &hi_pause);
> +		addr = SDAM_PAUSE_LO_MULTIPLIER_OFFSET + chan->sdam_offset;
> +		nvmem_device_write(lpg_chan_sdam, addr, 1, &lo_pause);
>  	}
>  
>  }
> -- 
> 2.34.1
>
Lee Jones June 13, 2024, 4:53 p.m. UTC | #3 
On Fri, 07 Jun 2024, Bjorn Andersson wrote:

> On Thu, Jun 06, 2024 at 05:52:52PM GMT, Anjelique Melendez wrote:
> > Fix line wrapping style issues introduced in previous patches.
> 
> Bending the line length guidelines is okay when it results in easier to
> read code. I find the existing code easier to read...

Agree.  This patch is not going to be accepted.

> > Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
> > ---
> >  drivers/leds/rgb/leds-qcom-lpg.c | 19 +++++++++++++------
> >  1 file changed, 13 insertions(+), 6 deletions(-)
> > 
> > diff --git a/drivers/leds/rgb/leds-qcom-lpg.c b/drivers/leds/rgb/leds-qcom-lpg.c
> > index e74b2ceed1c2..7c35b3ba09a3 100644
> > --- a/drivers/leds/rgb/leds-qcom-lpg.c
> > +++ b/drivers/leds/rgb/leds-qcom-lpg.c
> > @@ -620,6 +620,7 @@ static void lpg_sdam_apply_lut_control(struct lpg_channel *chan)
> >  	u8 val = 0, conf = 0, lut_offset = 0;
> >  	unsigned int hi_pause, lo_pause;
> >  	struct lpg *lpg = chan->lpg;
> > +	u16 addr;
> >  
> >  	if (!chan->ramp_enabled || chan->pattern_lo_idx == chan->pattern_hi_idx)
> >  		return;
> > @@ -640,17 +641,23 @@ static void lpg_sdam_apply_lut_control(struct lpg_channel *chan)
> >  		lo_idx += lut_offset;
> >  	}
> >  
> > -	nvmem_device_write(lpg_chan_sdam, SDAM_PBS_SCRATCH_LUT_COUNTER_OFFSET + chan->sdam_offset, 1, &val);
> > -	nvmem_device_write(lpg_chan_sdam, SDAM_PATTERN_CONFIG_OFFSET + chan->sdam_offset, 1, &conf);
> > -	nvmem_device_write(lpg_chan_sdam, SDAM_END_INDEX_OFFSET + chan->sdam_offset, 1, &hi_idx);
> > -	nvmem_device_write(lpg_chan_sdam, SDAM_START_INDEX_OFFSET + chan->sdam_offset, 1, &lo_idx);
> > +	addr = SDAM_PBS_SCRATCH_LUT_COUNTER_OFFSET + chan->sdam_offset;
> > +	nvmem_device_write(lpg_chan_sdam, addr, 1, &val);
> > +	addr = SDAM_PATTERN_CONFIG_OFFSET + chan->sdam_offset;
> > +	nvmem_device_write(lpg_chan_sdam, addr, 1, &conf);
> > +	addr = SDAM_END_INDEX_OFFSET + chan->sdam_offset;
> > +	nvmem_device_write(lpg_chan_sdam, addr, 1, &hi_idx);
> > +	addr = SDAM_START_INDEX_OFFSET + chan->sdam_offset;
> > +	nvmem_device_write(lpg_chan_sdam, addr, 1, &lo_idx);
> >  
> >  	val = RAMP_STEP_DURATION(chan->ramp_tick_ms);
> >  	nvmem_device_write(lpg_chan_sdam, SDAM_REG_RAMP_STEP_DURATION, 1, &val);
> >  
> >  	if (lpg->lut_sdam) {
> > -		nvmem_device_write(lpg_chan_sdam, SDAM_PAUSE_HI_MULTIPLIER_OFFSET + chan->sdam_offset, 1, &hi_pause);
> > -		nvmem_device_write(lpg_chan_sdam, SDAM_PAUSE_LO_MULTIPLIER_OFFSET + chan->sdam_offset, 1, &lo_pause);
> > +		addr = SDAM_PAUSE_HI_MULTIPLIER_OFFSET + chan->sdam_offset;
> > +		nvmem_device_write(lpg_chan_sdam, addr, 1, &hi_pause);
> > +		addr = SDAM_PAUSE_LO_MULTIPLIER_OFFSET + chan->sdam_offset;
> > +		nvmem_device_write(lpg_chan_sdam, addr, 1, &lo_pause);
> >  	}
> >  
> >  }
> > -- 
> > 2.34.1
> >
diff mbox series

Patch

diff --git a/drivers/leds/rgb/leds-qcom-lpg.c b/drivers/leds/rgb/leds-qcom-lpg.c
index e74b2ceed1c2..7c35b3ba09a3 100644
--- a/drivers/leds/rgb/leds-qcom-lpg.c
+++ b/drivers/leds/rgb/leds-qcom-lpg.c
@@ -620,6 +620,7 @@  static void lpg_sdam_apply_lut_control(struct lpg_channel *chan)
 	u8 val = 0, conf = 0, lut_offset = 0;
 	unsigned int hi_pause, lo_pause;
 	struct lpg *lpg = chan->lpg;
+	u16 addr;
 
 	if (!chan->ramp_enabled || chan->pattern_lo_idx == chan->pattern_hi_idx)
 		return;
@@ -640,17 +641,23 @@  static void lpg_sdam_apply_lut_control(struct lpg_channel *chan)
 		lo_idx += lut_offset;
 	}
 
-	nvmem_device_write(lpg_chan_sdam, SDAM_PBS_SCRATCH_LUT_COUNTER_OFFSET + chan->sdam_offset, 1, &val);
-	nvmem_device_write(lpg_chan_sdam, SDAM_PATTERN_CONFIG_OFFSET + chan->sdam_offset, 1, &conf);
-	nvmem_device_write(lpg_chan_sdam, SDAM_END_INDEX_OFFSET + chan->sdam_offset, 1, &hi_idx);
-	nvmem_device_write(lpg_chan_sdam, SDAM_START_INDEX_OFFSET + chan->sdam_offset, 1, &lo_idx);
+	addr = SDAM_PBS_SCRATCH_LUT_COUNTER_OFFSET + chan->sdam_offset;
+	nvmem_device_write(lpg_chan_sdam, addr, 1, &val);
+	addr = SDAM_PATTERN_CONFIG_OFFSET + chan->sdam_offset;
+	nvmem_device_write(lpg_chan_sdam, addr, 1, &conf);
+	addr = SDAM_END_INDEX_OFFSET + chan->sdam_offset;
+	nvmem_device_write(lpg_chan_sdam, addr, 1, &hi_idx);
+	addr = SDAM_START_INDEX_OFFSET + chan->sdam_offset;
+	nvmem_device_write(lpg_chan_sdam, addr, 1, &lo_idx);
 
 	val = RAMP_STEP_DURATION(chan->ramp_tick_ms);
 	nvmem_device_write(lpg_chan_sdam, SDAM_REG_RAMP_STEP_DURATION, 1, &val);
 
 	if (lpg->lut_sdam) {
-		nvmem_device_write(lpg_chan_sdam, SDAM_PAUSE_HI_MULTIPLIER_OFFSET + chan->sdam_offset, 1, &hi_pause);
-		nvmem_device_write(lpg_chan_sdam, SDAM_PAUSE_LO_MULTIPLIER_OFFSET + chan->sdam_offset, 1, &lo_pause);
+		addr = SDAM_PAUSE_HI_MULTIPLIER_OFFSET + chan->sdam_offset;
+		nvmem_device_write(lpg_chan_sdam, addr, 1, &hi_pause);
+		addr = SDAM_PAUSE_LO_MULTIPLIER_OFFSET + chan->sdam_offset;
+		nvmem_device_write(lpg_chan_sdam, addr, 1, &lo_pause);
 	}
 
 }