diff mbox series

gpio-syscon: do not report bogus error

Message ID Zktwd4Y8zu6XSGaE@Z926fQmE5jqhFMgp6
State New
Headers show
Series gpio-syscon: do not report bogus error | expand

Commit Message

Etienne Buira May 20, 2024, 3:47 p.m. UTC
Do not issue "can't read the data register offset!" when gpio,syscon-dev
is not set albeit unneeded.  gpio-syscon is used with rk3328 chip, but
this iomem region is documented in
Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.yaml and
does not require gpio,syscon-dev setting.

v3:
  - moved from flag to parent regmap detection

Signed-off-by: Etienne Buira <etienne.buira@free.fr>
---
 drivers/gpio/gpio-syscon.c | 27 ++++++++++++++++-----------
 1 file changed, 16 insertions(+), 11 deletions(-)


base-commit: 4cece764965020c22cff7665b18a012006359095

Comments

Linus Walleij May 28, 2024, 11:43 a.m. UTC | #1
On Mon, May 20, 2024 at 5:48 PM Etienne Buira <etienne.buira@free.fr> wrote:

> Do not issue "can't read the data register offset!" when gpio,syscon-dev
> is not set albeit unneeded.  gpio-syscon is used with rk3328 chip, but
> this iomem region is documented in
> Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.yaml and
> does not require gpio,syscon-dev setting.
>
> v3:
>   - moved from flag to parent regmap detection
>
> Signed-off-by: Etienne Buira <etienne.buira@free.fr>

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij
Bartosz Golaszewski May 29, 2024, 11:17 a.m. UTC | #2
On Mon, May 20, 2024 at 5:48 PM Etienne Buira <etienne.buira@free.fr> wrote:
>
> Do not issue "can't read the data register offset!" when gpio,syscon-dev
> is not set albeit unneeded.  gpio-syscon is used with rk3328 chip, but
> this iomem region is documented in
> Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.yaml and
> does not require gpio,syscon-dev setting.
>
> v3:
>   - moved from flag to parent regmap detection
>

Don't make the changelog part of the commit message, please.

Bart

> Signed-off-by: Etienne Buira <etienne.buira@free.fr>
> ---
>  drivers/gpio/gpio-syscon.c | 27 ++++++++++++++++-----------
>  1 file changed, 16 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/gpio/gpio-syscon.c b/drivers/gpio/gpio-syscon.c
> index 6e1a2581e6ae..3a90a3a1caea 100644
> --- a/drivers/gpio/gpio-syscon.c
> +++ b/drivers/gpio/gpio-syscon.c
> @@ -208,6 +208,7 @@ static int syscon_gpio_probe(struct platform_device *pdev)
>         struct syscon_gpio_priv *priv;
>         struct device_node *np = dev->of_node;
>         int ret;
> +       bool use_parent_regmap = false;
>
>         priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
>         if (!priv)
> @@ -216,24 +217,28 @@ static int syscon_gpio_probe(struct platform_device *pdev)
>         priv->data = of_device_get_match_data(dev);
>
>         priv->syscon = syscon_regmap_lookup_by_phandle(np, "gpio,syscon-dev");
> -       if (IS_ERR(priv->syscon) && np->parent)
> +       if (IS_ERR(priv->syscon) && np->parent) {
>                 priv->syscon = syscon_node_to_regmap(np->parent);
> +               use_parent_regmap = true;
> +       }
>         if (IS_ERR(priv->syscon))
>                 return PTR_ERR(priv->syscon);
>
> -       ret = of_property_read_u32_index(np, "gpio,syscon-dev", 1,
> -                                        &priv->dreg_offset);
> -       if (ret)
> -               dev_err(dev, "can't read the data register offset!\n");
> +       if (!use_parent_regmap) {
> +               ret = of_property_read_u32_index(np, "gpio,syscon-dev", 1,
> +                                                &priv->dreg_offset);
> +               if (ret)
> +                       dev_err(dev, "can't read the data register offset!\n");
>
> -       priv->dreg_offset <<= 3;
> +               priv->dreg_offset <<= 3;
>
> -       ret = of_property_read_u32_index(np, "gpio,syscon-dev", 2,
> -                                        &priv->dir_reg_offset);
> -       if (ret)
> -               dev_dbg(dev, "can't read the dir register offset!\n");
> +               ret = of_property_read_u32_index(np, "gpio,syscon-dev", 2,
> +                                                &priv->dir_reg_offset);
> +               if (ret)
> +                       dev_dbg(dev, "can't read the dir register offset!\n");
>
> -       priv->dir_reg_offset <<= 3;
> +               priv->dir_reg_offset <<= 3;
> +       }
>
>         priv->chip.parent = dev;
>         priv->chip.owner = THIS_MODULE;
>
> base-commit: 4cece764965020c22cff7665b18a012006359095
> --
> 2.43.0
>
Bartosz Golaszewski May 29, 2024, 11:18 a.m. UTC | #3
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>


On Mon, 20 May 2024 17:47:03 +0200, Etienne Buira wrote:
> Do not issue "can't read the data register offset!" when gpio,syscon-dev
> is not set albeit unneeded.  gpio-syscon is used with rk3328 chip, but
> this iomem region is documented in
> Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.yaml and
> does not require gpio,syscon-dev setting.
> 
> v3:
>   - moved from flag to parent regmap detection
> 
> [...]

Applied, thanks!

[1/1] gpio-syscon: do not report bogus error
      commit: ca09ce254a65fa0c09f3369724ee0477a7246247

Best regards,
diff mbox series

Patch

diff --git a/drivers/gpio/gpio-syscon.c b/drivers/gpio/gpio-syscon.c
index 6e1a2581e6ae..3a90a3a1caea 100644
--- a/drivers/gpio/gpio-syscon.c
+++ b/drivers/gpio/gpio-syscon.c
@@ -208,6 +208,7 @@  static int syscon_gpio_probe(struct platform_device *pdev)
 	struct syscon_gpio_priv *priv;
 	struct device_node *np = dev->of_node;
 	int ret;
+	bool use_parent_regmap = false;
 
 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
@@ -216,24 +217,28 @@  static int syscon_gpio_probe(struct platform_device *pdev)
 	priv->data = of_device_get_match_data(dev);
 
 	priv->syscon = syscon_regmap_lookup_by_phandle(np, "gpio,syscon-dev");
-	if (IS_ERR(priv->syscon) && np->parent)
+	if (IS_ERR(priv->syscon) && np->parent) {
 		priv->syscon = syscon_node_to_regmap(np->parent);
+		use_parent_regmap = true;
+	}
 	if (IS_ERR(priv->syscon))
 		return PTR_ERR(priv->syscon);
 
-	ret = of_property_read_u32_index(np, "gpio,syscon-dev", 1,
-					 &priv->dreg_offset);
-	if (ret)
-		dev_err(dev, "can't read the data register offset!\n");
+	if (!use_parent_regmap) {
+		ret = of_property_read_u32_index(np, "gpio,syscon-dev", 1,
+						 &priv->dreg_offset);
+		if (ret)
+			dev_err(dev, "can't read the data register offset!\n");
 
-	priv->dreg_offset <<= 3;
+		priv->dreg_offset <<= 3;
 
-	ret = of_property_read_u32_index(np, "gpio,syscon-dev", 2,
-					 &priv->dir_reg_offset);
-	if (ret)
-		dev_dbg(dev, "can't read the dir register offset!\n");
+		ret = of_property_read_u32_index(np, "gpio,syscon-dev", 2,
+						 &priv->dir_reg_offset);
+		if (ret)
+			dev_dbg(dev, "can't read the dir register offset!\n");
 
-	priv->dir_reg_offset <<= 3;
+		priv->dir_reg_offset <<= 3;
+	}
 
 	priv->chip.parent = dev;
 	priv->chip.owner = THIS_MODULE;