| Message ID | 20240309121129.5379-1-quic_lingbok@quicinc.com |
|---|---|
| State | New |
| Headers | show |
| Series | wifi: ath11k: modify the calculation of the average signal strength in station mode | expand |
On 2024/3/14 0:20, Kalle Valo wrote: > Lingbo Kong <quic_lingbok@quicinc.com> wrote: > >> Currently, the calculation of the average signal strength in station mode >> is incorrect. >> >> This is because before calculating the average signal strength, ath11k need >> to determine whether the hardware and firmware support db2dbm, if the >> hardware and firmware support db2dbm, do not need to add noise floor, >> otherwise, need to add noise floor. >> >> Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 >> >> Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com> >> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> > > What about AP chipsets like QCN9074, do they also work similarly? > yes, i asked WIN's colleague Ashok Raj Nagarajan for helping to test this patch. they work similarly. Best regards Lingbo Kong
On 2024/3/14 0:20, Kalle Valo wrote: > Lingbo Kong <quic_lingbok@quicinc.com> wrote: > >> Currently, the calculation of the average signal strength in station mode >> is incorrect. >> >> This is because before calculating the average signal strength, ath11k need >> to determine whether the hardware and firmware support db2dbm, if the >> hardware and firmware support db2dbm, do not need to add noise floor, >> otherwise, need to add noise floor. >> >> Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 >> >> Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com> >> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> > > What about AP chipsets like QCN9074, do they also work similarly? > Hi, kalle, I observe this patch's status is deferred. https://patchwork.kernel.org/project/linux-wireless/patch/20240309121129.5379-1-quic_lingbok@quicinc.com/ I think it belongs to bug-fix, so, could you please merge it? :) Best regards Lingbo Kong
Lingbo Kong <quic_lingbok@quicinc.com> writes: > On 2024/3/14 0:20, Kalle Valo wrote: >> Lingbo Kong <quic_lingbok@quicinc.com> wrote: >> >>> Currently, the calculation of the average signal strength in station mode >>> is incorrect. >>> >>> This is because before calculating the average signal strength, ath11k need >>> to determine whether the hardware and firmware support db2dbm, if the >>> hardware and firmware support db2dbm, do not need to add noise floor, >>> otherwise, need to add noise floor. >>> >>> Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 >>> >>> Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com> >>> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> >> What about AP chipsets like QCN9074, do they also work similarly? >> > Hi, kalle, > > I observe this patch's status is deferred. > https://patchwork.kernel.org/project/linux-wireless/patch/20240309121129.5379-1-quic_lingbok@quicinc.com/ > > I think it belongs to bug-fix, so, could you please merge it? :) I need to test it first which takes time.
Lingbo Kong <quic_lingbok@quicinc.com> wrote: > Currently, the calculation of the average signal strength in station mode > is incorrect. > > This is because before calculating the average signal strength, ath11k need > to determine whether the hardware and firmware support db2dbm, if the > hardware and firmware support db2dbm, do not need to add noise floor, > otherwise, need to add noise floor. > > Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 > > Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com> > Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> > Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Patch applied to ath-next branch of ath.git, thanks. aadeee47e9d7 wifi: ath11k: modify the calculation of the average signal strength in station mode
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c index a6a37d67a50a..1f9cf7a42ba8 100644 --- a/drivers/net/wireless/ath/ath11k/mac.c +++ b/drivers/net/wireless/ath/ath11k/mac.c @@ -8976,8 +8976,11 @@ static void ath11k_mac_op_sta_statistics(struct ieee80211_hw *hw, sinfo->filled |= BIT_ULL(NL80211_STA_INFO_SIGNAL); } - sinfo->signal_avg = ewma_avg_rssi_read(&arsta->avg_rssi) + - ATH11K_DEFAULT_NOISE_FLOOR; + sinfo->signal_avg = ewma_avg_rssi_read(&arsta->avg_rssi); + + if (!db2dbm) + sinfo->signal_avg += ATH11K_DEFAULT_NOISE_FLOOR; + sinfo->filled |= BIT_ULL(NL80211_STA_INFO_SIGNAL_AVG); }
Currently, the calculation of the average signal strength in station mode is incorrect. This is because before calculating the average signal strength, ath11k need to determine whether the hardware and firmware support db2dbm, if the hardware and firmware support db2dbm, do not need to add noise floor, otherwise, need to add noise floor. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com> --- drivers/net/wireless/ath/ath11k/mac.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) base-commit: 7a5ed5a3801e9b6cf7bafbb0a05c70cef620b22a